From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752442Ab3LQTiw (ORCPT ); Tue, 17 Dec 2013 14:38:52 -0500 Received: from mail-la0-f51.google.com ([209.85.215.51]:57542 "EHLO mail-la0-f51.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752346Ab3LQTit (ORCPT ); Tue, 17 Dec 2013 14:38:49 -0500 From: Sergei Ianovich To: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Cc: Sergei Ianovich , Daniel Mack , Arnd Bergmann , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Rob Landley , Russell King , devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND...), linux-doc@vger.kernel.org (open list:DOCUMENTATION) Subject: [PATCH v3 06/21] ARM: dts: provide DMA config to pxamci on PXA27x Date: Tue, 17 Dec 2013 23:37:36 +0400 Message-Id: <1387309071-22382-7-git-send-email-ynvich@gmail.com> X-Mailer: git-send-email 1.8.5.1 In-Reply-To: <1387309071-22382-1-git-send-email-ynvich@gmail.com> References: <1386901645-28895-1-git-send-email-ynvich@gmail.com> <1387309071-22382-1-git-send-email-ynvich@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Non-dts implementation supply required DMA channel numbers as IORESOURCE_DMA. We can also get them from the device tree, if it is present. This patch updates device tree with the proper dmaengine-based "marvell,pdma-1.0" DMA. There is no actual data handling in this patch, because the existing driver cannot get DMA channel number from dmaengine API. The patch in the series will provide temporary workaround by manually parsing node attributes, until Daniel's series is ready to be merged. Signed-off-by: Sergei Ianovich CC: Daniel Mack CC: Arnd Bergmann --- v2..v3 * split into good (this one) and temporary (PATCH 07/21) parts v1..v2 * add binding for next-gen dma controller * use correct dma declararion * number changed from 5 to 3 Documentation/devicetree/bindings/mmc/pxa-mmc.txt | 5 +++++ arch/arm/boot/dts/pxa27x.dtsi | 14 ++++++++++++++ 2 files changed, 19 insertions(+) diff --git a/Documentation/devicetree/bindings/mmc/pxa-mmc.txt b/Documentation/devicetree/bindings/mmc/pxa-mmc.txt index b7025de..9f54c69 100644 --- a/Documentation/devicetree/bindings/mmc/pxa-mmc.txt +++ b/Documentation/devicetree/bindings/mmc/pxa-mmc.txt @@ -5,6 +5,8 @@ Driver bindings for the PXA MCI (MMC/SDIO) interfaces Required properties: - compatible: Should be "marvell,pxa-mmc". - vmmc-supply: A regulator for VMMC +- dmas: Should be DMA specifiers for RX and TX +- dma-names: Should be "rx" and "tx" Optional properties: - marvell,detect-delay-ms: sets the detection delay timeout in ms. @@ -21,5 +23,8 @@ mmc0: mmc@41100000 { interrupts = <23>; cd-gpios = <&gpio 23 0>; wp-gpios = <&gpio 24 0>; + dmas = <&dma 21 + &dma 22>; + dma-names = "rx", "tx"; }; diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi index 44df554..c2a90c5 100644 --- a/arch/arm/boot/dts/pxa27x.dtsi +++ b/arch/arm/boot/dts/pxa27x.dtsi @@ -11,10 +11,24 @@ marvell,intc-nr-irqs = <34>; }; + dma: dma-controller@40000000 { + compatible = "marvell,pdma-1.0"; + reg = <0x40000000 0x10000>; + interrupts = <25>; + #dma-cells = <1>; + dma-channels = <32>; + }; + gpio: gpio@40e00000 { compatible = "intel,pxa27x-gpio"; interrupts = <8>, <9>, <10>; interrupt-names = "gpio0", "gpio1", "gpio_mux"; }; + + mmc@41100000 { + dmas = <&dma 21 + &dma 22>; + dma-names = "rx", "tx"; + }; }; }; -- 1.8.4.2