From: Steven Whitehouse <swhiteho@redhat.com>
To: linux-kernel@vger.kernel.org, cluster-devel@redhat.com
Cc: Bob Peterson <rpeterso@redhat.com>,
Steven Whitehouse <swhiteho@redhat.com>
Subject: [PATCH 02/24] GFS2: Drop inadequate rgrps from the reservation tree
Date: Mon, 20 Jan 2014 12:23:25 +0000 [thread overview]
Message-ID: <1390220627-1571-3-git-send-email-swhiteho@redhat.com> (raw)
In-Reply-To: <1390220627-1571-1-git-send-email-swhiteho@redhat.com>
From: Bob Peterson <rpeterso@redhat.com>
This is just basically a resend of a patch I posted earlier.
It didn't change from its original, except in diff offsets, etc:
This patch fixes a bug in the GFS2 block allocation code. The problem
starts if a process already has a multi-block reservation, but for
some reason, another process disqualifies it from further allocations.
For example, the other process might set on the GFS2_RDF_ERROR bit.
The process holding the reservation jumps to label skip_rgrp, but
that label comes after the code that removes the reservation from the
tree. Therefore, the no longer usable reservation is not removed from
the rgrp's reservations tree; it's lost. Eventually, the lost reservation
causes the count of reserved blocks to get off, and eventually that
causes a BUG_ON(rs->rs_rbm.rgd->rd_reserved < rs->rs_free) to trigger.
This patch moves the call to after label skip_rgrp so that the
disqualified reservation is properly removed from the tree, thus keeping
the rgrp rd_reserved count sane.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c
index 809fecd..1ccf89a 100644
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -1944,15 +1944,16 @@ int gfs2_inplace_reserve(struct gfs2_inode *ip, const struct gfs2_alloc_parms *a
return 0;
}
- /* Drop reservation, if we couldn't use reserved rgrp */
- if (gfs2_rs_active(rs))
- gfs2_rs_deltree(rs);
check_rgrp:
/* Check for unlinked inodes which can be reclaimed */
if (rs->rs_rbm.rgd->rd_flags & GFS2_RDF_CHECK)
try_rgrp_unlink(rs->rs_rbm.rgd, &last_unlinked,
ip->i_no_addr);
skip_rgrp:
+ /* Drop reservation, if we couldn't use reserved rgrp */
+ if (gfs2_rs_active(rs))
+ gfs2_rs_deltree(rs);
+
/* Unlock rgrp if required */
if (!rg_locked)
gfs2_glock_dq_uninit(&rs->rs_rgd_gh);
--
1.8.3.1
next prev parent reply other threads:[~2014-01-20 12:24 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-20 12:23 GFS2: Pre-pull patch posting (merge window) Steven Whitehouse
2014-01-20 12:23 ` [PATCH 01/24] GFS2: If requested is too large, use the largest extent in the rgrp Steven Whitehouse
2014-01-20 12:23 ` Steven Whitehouse [this message]
2014-01-20 12:23 ` [PATCH 03/24] GFS2: Implement a "rgrp has no extents longer than X" scheme Steven Whitehouse
2014-01-20 12:23 ` [PATCH 04/24] GFS2: Clean up releasepage Steven Whitehouse
2014-01-20 12:23 ` [PATCH 05/24] GFS2: Remove gfs2_quota_change_host structure Steven Whitehouse
2014-01-20 12:23 ` [PATCH 06/24] GFS2: Remove test which is always true Steven Whitehouse
2014-01-20 12:23 ` [PATCH 07/24] GFS2: Use range based functions for rgrp sync/invalidation Steven Whitehouse
2014-01-20 12:23 ` [PATCH 08/24] GFS2: Use only a single address space for rgrps Steven Whitehouse
2014-01-20 12:23 ` [PATCH 09/24] GFS2: Add directory addition info structure Steven Whitehouse
2014-01-20 12:23 ` [PATCH 10/24] GFS2: Consolidate transaction blocks calculation for dir add Steven Whitehouse
2014-01-20 12:23 ` [PATCH 11/24] GFS2: Remember directory insert point Steven Whitehouse
2014-01-20 12:23 ` [PATCH 12/24] GFS2: Increase i_writecount during gfs2_setattr_chown Steven Whitehouse
2014-01-20 12:23 ` [PATCH 13/24] GFS2: For exhash conversion, only one block is needed Steven Whitehouse
2014-01-20 12:23 ` [PATCH 14/24] GFS2: Add hints to directory leaf blocks Steven Whitehouse
2014-01-20 12:23 ` [PATCH 15/24] GFS2: Add initialization for address space in super block Steven Whitehouse
2014-01-20 12:23 ` [PATCH 16/24] GFS2: No need to invalidate pages for a dio read Steven Whitehouse
2014-01-20 12:23 ` [PATCH 17/24] GFS2: Use RCU/hlist_bl based hash for quotas Steven Whitehouse
2014-01-22 5:32 ` Paul E. McKenney
2014-01-22 6:06 ` Sasha Levin
2014-01-22 9:43 ` Steven Whitehouse
2014-01-22 9:58 ` Steven Whitehouse
2014-01-20 12:23 ` [PATCH 18/24] GFS2: Only run logd and quota when mounted read/write Steven Whitehouse
2014-01-20 12:23 ` [PATCH 19/24] GFS2: Clean up quota slot allocation Steven Whitehouse
2014-01-20 12:23 ` [PATCH 20/24] GFS2: Move quota bitmap operations under their own lock Steven Whitehouse
2014-01-20 12:23 ` [PATCH 21/24] GFS2: Fix kbuild test robot reported warning Steven Whitehouse
2014-01-20 12:23 ` [PATCH 22/24] GFS2: Don't use ENOBUFS when ENOMEM is the correct error code Steven Whitehouse
2014-01-20 12:23 ` [PATCH 23/24] GFS2: Small cleanup Steven Whitehouse
2014-01-20 12:23 ` [PATCH 24/24] GFS2: revert "GFS2: d_splice_alias() can't return error" Steven Whitehouse
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1390220627-1571-3-git-send-email-swhiteho@redhat.com \
--to=swhiteho@redhat.com \
--cc=cluster-devel@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=rpeterso@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox