[PATCH v2 1/2] mfd: fix a grammar issue in the Kconfig entries

[Laszlo Papp <lpapp@kde.org>]

"to support for" is incorrect English in here, hence the change to "to add
support".

Signed-off-by: Laszlo Papp <lpapp@kde.org>
---
 drivers/mfd/Kconfig | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 49bb445..58f2fb5 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -100,7 +100,7 @@ config PMIC_DA903X
 	bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
 	depends on I2C=y
 	help
-	  Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
+	  Say yes here to add support for Dialog Semiconductor DA9030 (a.k.a
 	  ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
 	  usually found on PXA processors-based platforms. This includes
 	  the I2C driver and the core APIs _only_, you have to select
@@ -324,7 +324,7 @@ config MFD_MAX14577
 	select REGMAP_I2C
 	select IRQ_DOMAIN
 	help
-	  Say yes here to support for Maxim Semiconductor MAX14577.
+	  Say yes here to add support for Maxim Semiconductor MAX14577.
 	  This is a Micro-USB IC with Charger controls on chip.
 	  This driver provides common support for accessing the device;
 	  additional drivers must be enabled in order to use the functionality
@@ -337,7 +337,7 @@ config MFD_MAX77686
 	select REGMAP_I2C
 	select IRQ_DOMAIN
 	help
-	  Say yes here to support for Maxim Semiconductor MAX77686.
+	  Say yes here to add support for Maxim Semiconductor MAX77686.
 	  This is a Power Management IC with RTC on chip.
 	  This driver provides common support for accessing the device;
 	  additional drivers must be enabled in order to use the functionality
@@ -349,7 +349,7 @@ config MFD_MAX77693
 	select MFD_CORE
 	select REGMAP_I2C
 	help
-	  Say yes here to support for Maxim Semiconductor MAX77693.
+	  Say yes here to add support for Maxim Semiconductor MAX77693.
 	  This is a companion Power Management IC with Flash, Haptic, Charger,
 	  and MUIC(Micro USB Interface Controller) controls on chip.
 	  This driver provides common support for accessing the device;
@@ -363,7 +363,7 @@ config MFD_MAX8907
 	select REGMAP_I2C
 	select REGMAP_IRQ
 	help
-	  Say yes here to support for Maxim Semiconductor MAX8907. This is
+	  Say yes here to add support for Maxim Semiconductor MAX8907. This is
 	  a Power Management IC. This driver provides common support for
 	  accessing the device; additional drivers must be enabled in order
 	  to use the functionality of the device.
@@ -373,7 +373,7 @@ config MFD_MAX8925
 	depends on I2C=y
 	select MFD_CORE
 	help
-	  Say yes here to support for Maxim Semiconductor MAX8925. This is
+	  Say yes here to add support for Maxim Semiconductor MAX8925. This is
 	  a Power Management IC. This driver provides common support for
 	  accessing the device, additional drivers must be enabled in order
 	  to use the functionality of the device.
@@ -384,7 +384,7 @@ config MFD_MAX8997
 	select MFD_CORE
 	select IRQ_DOMAIN
 	help
-	  Say yes here to support for Maxim Semiconductor MAX8997/8966.
+	  Say yes here to add support for Maxim Semiconductor MAX8997/8966.
 	  This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
 	  MUIC controls on chip.
 	  This driver provides common support for accessing the device;
@@ -397,7 +397,7 @@ config MFD_MAX8998
 	select MFD_CORE
 	select IRQ_DOMAIN
 	help
-	  Say yes here to support for Maxim Semiconductor MAX8998 and
+	  Say yes here to add support for Maxim Semiconductor MAX8998 and
 	  National Semiconductor LP3974. This is a Power Management IC.
 	  This driver provides common support for accessing the device,
 	  additional drivers must be enabled in order to use the functionality
-- 
1.8.5.4