Re: [PATCH v2 07/14] regulator: s2mps11: Copy supported regulators from initconst

[Krzysztof Kozlowski <k.kozlowski@samsung.com>]

On Thu, 2014-02-13 at 17:51 +0530, Yadwinder Singh Brar wrote:
> Hi,
> 
> On Thu, Feb 13, 2014 at 2:44 PM, Krzysztof Kozlowski
> <k.kozlowski@samsung.com> wrote:
> > Add __initconst to 'regulator_desc' array with supported regulators.
> > During probe choose how many and which regulators will be supported
> > according to device ID. Then copy the 'regulator_desc' array to
> > allocated memory so the regulator core can use it.
> >
> > Additionally allocate array of of_regulator_match() dynamically (based
> > on number of regulators) instead of allocation on the stack.
> >
> > This is needed for supporting different devices in s2mps11
> > driver and actually prepares the regulator driver for supporting the
> > S2MPS14 device.
> >
> > Code for supporting the S2MPS14 device will add its own array of
> > 'regulator_desc' (also marked as __initconst). This way memory footprint
> > of the driver will be reduced (approximately 'regulators_desc' array for
> > S2MPS11 occupies 5 kB on 32-bit ARM, for S2MPS14 will occupy 3 kB).
> >
> > Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> > Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> > Cc: Mark Brown <broonie@kernel.org>
> > Cc: Liam Girdwood <lgirdwood@gmail.com>
> > Cc: Yadwinder Singh Brar <yadi.brar01@gmail.com>
> > ---
> 
> Just observed one trivial thing that in this patch, spacing is not
> provided before and after multiplication binary operator ( _ * _ ),
> which is recommended by linux spacing convention.
> 
> Other than that it looks fine to me, pls feel free to add
> 
> Reviewed-by: Yadwinder Singh Brar <yadi.brar@samsung.com>
> 

Thanks for review. I'll send a patch with proper spacing around '*'.

Best regards,
Krzysztof