From: Axel Lin <axel.lin@ingics.com>
To: Mark Brown <broonie@kernel.org>
Cc: Thomas Abraham <thomas.abraham@linaro.org>,
Kyungmin Park <kyungmin.park@samsung.com>,
MyungJoo Ham <myungjoo.ham@samsung.com>,
Liam Girdwood <lrg@ti.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH 2/3] regulator: max8997: Remove unnecessary **rdev from struct max8997_data
Date: Sun, 09 Mar 2014 15:29:31 +0800 [thread overview]
Message-ID: <1394350171.19772.3.camel@phoenix> (raw)
In-Reply-To: <1394350032.19772.1.camel@phoenix>
Now we are using devm_regulator_register(), so we don't need to allocate *rdev[]
array to store return value of devm_regulator_register. Use a *rdev variable is
enough for checking return status.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
drivers/regulator/max8997.c | 19 ++++++-------------
1 file changed, 6 insertions(+), 13 deletions(-)
diff --git a/drivers/regulator/max8997.c b/drivers/regulator/max8997.c
index f657d8d..90b4c53 100644
--- a/drivers/regulator/max8997.c
+++ b/drivers/regulator/max8997.c
@@ -38,7 +38,6 @@ struct max8997_data {
struct device *dev;
struct max8997_dev *iodev;
int num_regulators;
- struct regulator_dev **rdev;
int ramp_delay; /* in mV/us */
bool buck1_gpiodvs;
@@ -1029,10 +1028,10 @@ static int max8997_pmic_probe(struct platform_device *pdev)
struct max8997_dev *iodev = dev_get_drvdata(pdev->dev.parent);
struct max8997_platform_data *pdata = iodev->pdata;
struct regulator_config config = { };
- struct regulator_dev **rdev;
+ struct regulator_dev *rdev;
struct max8997_data *max8997;
struct i2c_client *i2c;
- int i, ret, size, nr_dvs;
+ int i, ret, nr_dvs;
u8 max_buck1 = 0, max_buck2 = 0, max_buck5 = 0;
if (!pdata) {
@@ -1051,12 +1050,6 @@ static int max8997_pmic_probe(struct platform_device *pdev)
if (!max8997)
return -ENOMEM;
- size = sizeof(struct regulator_dev *) * pdata->num_regulators;
- max8997->rdev = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
- if (!max8997->rdev)
- return -ENOMEM;
-
- rdev = max8997->rdev;
max8997->dev = &pdev->dev;
max8997->iodev = iodev;
max8997->num_regulators = pdata->num_regulators;
@@ -1204,12 +1197,12 @@ static int max8997_pmic_probe(struct platform_device *pdev)
config.driver_data = max8997;
config.of_node = pdata->regulators[i].reg_node;
- rdev[i] = devm_regulator_register(&pdev->dev, ®ulators[id],
- &config);
- if (IS_ERR(rdev[i])) {
+ rdev = devm_regulator_register(&pdev->dev, ®ulators[id],
+ &config);
+ if (IS_ERR(rdev)) {
dev_err(max8997->dev, "regulator init failed for %d\n",
id);
- return PTR_ERR(rdev[i]);
+ return PTR_ERR(rdev);
}
}
--
1.8.1.2
next prev parent reply other threads:[~2014-03-09 7:29 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-09 7:27 [PATCH 1/3] regulator: max77693: Remove unnecessary **rdev from struct max77693_pmic_dev Axel Lin
2014-03-09 7:29 ` Axel Lin [this message]
2014-03-10 10:11 ` [PATCH 2/3] regulator: max8997: Remove unnecessary **rdev from struct max8997_data Mark Brown
2014-03-09 7:32 ` [PATCH 3/3] regulator: max8998: Remove unnecessary **rdev from struct max8998_data Axel Lin
2014-03-10 10:12 ` Mark Brown
2014-03-10 12:14 ` [PATCH 1/3] regulator: max77693: Remove unnecessary **rdev from struct max77693_pmic_dev Mark Brown
-- strict thread matches above, loose matches on Subject: below --
2014-03-10 9:56 [PATCH 2/3] regulator: max8997: Remove unnecessary **rdev from struct max8997_data MyungJoo Ham
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1394350171.19772.3.camel@phoenix \
--to=axel.lin@ingics.com \
--cc=broonie@kernel.org \
--cc=kyungmin.park@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
--cc=myungjoo.ham@samsung.com \
--cc=thomas.abraham@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox