[PATCH 1/4] kmemcheck: add additional selfchecks

[Sasha Levin <sasha.levin@oracle.com>]

kmemcheck has it's own tiny opcode decoder, and is not using the
kernel's decoder for historic reasons.

While the decoder works for more cases, it fails on quite a few
opcodes and returns incorrect values, which leads to either a
failure to detect an issue, or a false positive.

This patch adds a few of those opcodes: setne, btsl and callq,
thus causing selfcheck to fail during boot.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
---
 arch/x86/mm/kmemcheck/selftest.c |    9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/x86/mm/kmemcheck/selftest.c b/arch/x86/mm/kmemcheck/selftest.c
index aef7140..c898d33 100644
--- a/arch/x86/mm/kmemcheck/selftest.c
+++ b/arch/x86/mm/kmemcheck/selftest.c
@@ -23,6 +23,12 @@ static const struct selftest_opcode selftest_opcodes[] = {
 	{1, "\x66\x0f\xbe\x51\xf8",	"movswq <mem8>, <reg16>"},
 	{1, "\x0f\xbe\x51\xf8",		"movswq <mem8>, <reg32>"},
 
+	/* SETNE */
+	{1, "\x0f\x95\xc0",		"setne <reg8>"},
+
+	/* BTSL */
+	{4, "\x0f\xba\x6b\x10\x00",	"btsl <imm8>, <mem32>"},
+
 #ifdef CONFIG_X86_64
 	/* MOVZX / MOVZXD */
 	{1, "\x49\x0f\xb6\x51\xf8",	"movzbq <mem8>, <reg64>"},
@@ -32,6 +38,9 @@ static const struct selftest_opcode selftest_opcodes[] = {
 	{1, "\x49\x0f\xbe\x51\xf8",	"movsbq <mem8>, <reg64>"},
 	{2, "\x49\x0f\xbf\x51\xf8",	"movsbq <mem16>, <reg64>"},
 	{4, "\x49\x63\x51\xf8",		"movslq <mem32>, <reg64>"},
+
+	/* CALLQ */
+	{8, "\xe8\x00\x00\x00",		"call <mem64>"},
 #endif
 };
 
-- 
1.7.10.4