From: "Pali Rohár" <pali.rohar@gmail.com>
To: Matthew Garrett <matthew.garrett@nebula.com>,
Randy Dunlap <rdunlap@infradead.org>
Cc: linux-kernel@vger.kernel.org,
platform-driver-x86@vger.kernel.org, linux-doc@vger.kernel.org,
"Sonal Santan" <sonal.santan@gmail.com>,
"Pali Rohár" <pali.rohar@gmail.com>
Subject: [PATCH 2/2] Documentation: Rename hpfall.c => freefall.c, fixes for Dell
Date: Sat, 3 May 2014 12:47:57 +0200 [thread overview]
Message-ID: <1399114077-19314-3-git-send-email-pali.rohar@gmail.com> (raw)
In-Reply-To: <1399114077-19314-1-git-send-email-pali.rohar@gmail.com>
Dell kernel driver dell-smo8800 provides same freefall interface as hp_accel so
program hpfall.c works also on Dell laptops. So rename it to freefall.c.
Dell driver does not provide hp::hddprotect led so make sure that freefall.c
works also if hp::hddprotect does not exist in sysfs.
Additionally write info to syslog.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Cc: Sonal Santan <sonal.santan@gmail.com>
---
Documentation/laptops/00-INDEX | 4 +-
Documentation/laptops/freefall.c | 171 ++++++++++++++++++++++++++++++++++++++
Documentation/laptops/hpfall.c | 146 --------------------------------
3 files changed, 173 insertions(+), 148 deletions(-)
create mode 100644 Documentation/laptops/freefall.c
delete mode 100644 Documentation/laptops/hpfall.c
diff --git a/Documentation/laptops/00-INDEX b/Documentation/laptops/00-INDEX
index d13b9a9..d399ae1 100644
--- a/Documentation/laptops/00-INDEX
+++ b/Documentation/laptops/00-INDEX
@@ -8,8 +8,8 @@ disk-shock-protection.txt
- information on hard disk shock protection.
dslm.c
- Simple Disk Sleep Monitor program
-hpfall.c
- - (HP) laptop accelerometer program for disk protection.
+freefall.c
+ - (HP/DELL) laptop accelerometer program for disk protection.
laptop-mode.txt
- how to conserve battery power using laptop-mode.
sony-laptop.txt
diff --git a/Documentation/laptops/freefall.c b/Documentation/laptops/freefall.c
new file mode 100644
index 0000000..4d4d90a
--- /dev/null
+++ b/Documentation/laptops/freefall.c
@@ -0,0 +1,171 @@
+/* Disk protection for HP/DELL machines.
+ *
+ * Copyright 2008 Eric Piel
+ * Copyright 2009 Pavel Machek <pavel@ucw.cz>
+ * Copyright 2012 Sonal Santan
+ * Copyright 2014 Pali Rohár <pali.rohar@gmail.com>
+ *
+ * GPLv2.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <string.h>
+#include <stdint.h>
+#include <errno.h>
+#include <signal.h>
+#include <sys/mman.h>
+#include <sched.h>
+#include <syslog.h>
+
+static int noled;
+static char unload_heads_path[64];
+static char device_path[32];
+static const char app_name[] = "FREE FALL";
+
+static int set_unload_heads_path(char *device)
+{
+ char devname[64];
+
+ if (strlen(device) <= 5 || strncmp(device, "/dev/", 5) != 0)
+ return -EINVAL;
+ strncpy(devname, device + 5, sizeof(devname) - 1);
+ strncpy(device_path, device, sizeof(device_path) - 1);
+
+ snprintf(unload_heads_path, sizeof(unload_heads_path) - 1,
+ "/sys/block/%s/device/unload_heads", devname);
+ return 0;
+}
+
+static int valid_disk(void)
+{
+ int fd = open(unload_heads_path, O_RDONLY);
+ if (fd < 0) {
+ perror(unload_heads_path);
+ return 0;
+ }
+
+ close(fd);
+ return 1;
+}
+
+static void write_int(char *path, int i)
+{
+ char buf[1024];
+ int fd = open(path, O_RDWR);
+ if (fd < 0) {
+ perror("open");
+ exit(1);
+ }
+ sprintf(buf, "%d", i);
+ if (write(fd, buf, strlen(buf)) != strlen(buf)) {
+ perror("write");
+ exit(1);
+ }
+ close(fd);
+}
+
+static void set_led(int on)
+{
+ if (noled)
+ return;
+ write_int("/sys/class/leds/hp::hddprotect/brightness", on);
+}
+
+static void protect(int seconds)
+{
+ const char *str = (seconds == 0) ? "Unparked" : "Parked";
+ write_int(unload_heads_path, seconds*1000);
+ syslog(LOG_INFO, "%s %s disk head\n", str, device_path);
+}
+
+static int on_ac(void)
+{
+ /* /sys/class/power_supply/AC0/online */
+ return 1;
+}
+
+static int lid_open(void)
+{
+ /* /proc/acpi/button/lid/LID/state */
+ return 1;
+}
+
+static void ignore_me(int signum)
+{
+ protect(0);
+ set_led(0);
+}
+
+int main(int argc, char **argv)
+{
+ int fd, ret;
+ struct stat st;
+ struct sched_param param;
+
+ if (argc == 1)
+ ret = set_unload_heads_path("/dev/sda");
+ else if (argc == 2)
+ ret = set_unload_heads_path(argv[1]);
+ else
+ ret = -EINVAL;
+
+ if (ret || !valid_disk()) {
+ fprintf(stderr, "usage: %s <device> (default: /dev/sda)\n",
+ argv[0]);
+ exit(1);
+ }
+
+ fd = open("/dev/freefall", O_RDONLY);
+ if (fd < 0) {
+ perror("/dev/freefall");
+ return EXIT_FAILURE;
+ }
+
+ if (stat("/sys/class/leds/hp::hddprotect/brightness", &st))
+ noled = 1;
+
+ if (daemon(0, 0) != 0) {
+ perror("daemon");
+ return EXIT_FAILURE;
+ }
+
+ openlog(app_name, LOG_CONS | LOG_PID | LOG_NDELAY, LOG_LOCAL1);
+
+ param.sched_priority = sched_get_priority_max(SCHED_FIFO);
+ sched_setscheduler(0, SCHED_FIFO, ¶m);
+ mlockall(MCL_CURRENT|MCL_FUTURE);
+
+ signal(SIGALRM, ignore_me);
+
+ for (;;) {
+ unsigned char count;
+
+ ret = read(fd, &count, sizeof(count));
+ alarm(0);
+ if ((ret == -1) && (errno == EINTR)) {
+ /* Alarm expired, time to unpark the heads */
+ continue;
+ }
+
+ if (ret != sizeof(count)) {
+ perror("read");
+ break;
+ }
+
+ protect(21);
+ set_led(1);
+ if (1 || on_ac() || lid_open())
+ alarm(2);
+ else
+ alarm(20);
+ }
+
+ closelog();
+ close(fd);
+ return EXIT_SUCCESS;
+}
diff --git a/Documentation/laptops/hpfall.c b/Documentation/laptops/hpfall.c
deleted file mode 100644
index b85dbba..0000000
--- a/Documentation/laptops/hpfall.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/* Disk protection for HP machines.
- *
- * Copyright 2008 Eric Piel
- * Copyright 2009 Pavel Machek <pavel@ucw.cz>
- *
- * GPLv2.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <sys/stat.h>
-#include <sys/types.h>
-#include <string.h>
-#include <stdint.h>
-#include <errno.h>
-#include <signal.h>
-#include <sys/mman.h>
-#include <sched.h>
-
-char unload_heads_path[64];
-
-int set_unload_heads_path(char *device)
-{
- char devname[64];
-
- if (strlen(device) <= 5 || strncmp(device, "/dev/", 5) != 0)
- return -EINVAL;
- strncpy(devname, device + 5, sizeof(devname));
-
- snprintf(unload_heads_path, sizeof(unload_heads_path) - 1,
- "/sys/block/%s/device/unload_heads", devname);
- return 0;
-}
-int valid_disk(void)
-{
- int fd = open(unload_heads_path, O_RDONLY);
- if (fd < 0) {
- perror(unload_heads_path);
- return 0;
- }
-
- close(fd);
- return 1;
-}
-
-void write_int(char *path, int i)
-{
- char buf[1024];
- int fd = open(path, O_RDWR);
- if (fd < 0) {
- perror("open");
- exit(1);
- }
- sprintf(buf, "%d", i);
- if (write(fd, buf, strlen(buf)) != strlen(buf)) {
- perror("write");
- exit(1);
- }
- close(fd);
-}
-
-void set_led(int on)
-{
- write_int("/sys/class/leds/hp::hddprotect/brightness", on);
-}
-
-void protect(int seconds)
-{
- write_int(unload_heads_path, seconds*1000);
-}
-
-int on_ac(void)
-{
-// /sys/class/power_supply/AC0/online
-}
-
-int lid_open(void)
-{
-// /proc/acpi/button/lid/LID/state
-}
-
-void ignore_me(void)
-{
- protect(0);
- set_led(0);
-}
-
-int main(int argc, char **argv)
-{
- int fd, ret;
- struct sched_param param;
-
- if (argc == 1)
- ret = set_unload_heads_path("/dev/sda");
- else if (argc == 2)
- ret = set_unload_heads_path(argv[1]);
- else
- ret = -EINVAL;
-
- if (ret || !valid_disk()) {
- fprintf(stderr, "usage: %s <device> (default: /dev/sda)\n",
- argv[0]);
- exit(1);
- }
-
- fd = open("/dev/freefall", O_RDONLY);
- if (fd < 0) {
- perror("/dev/freefall");
- return EXIT_FAILURE;
- }
-
- daemon(0, 0);
- param.sched_priority = sched_get_priority_max(SCHED_FIFO);
- sched_setscheduler(0, SCHED_FIFO, ¶m);
- mlockall(MCL_CURRENT|MCL_FUTURE);
-
- signal(SIGALRM, ignore_me);
-
- for (;;) {
- unsigned char count;
-
- ret = read(fd, &count, sizeof(count));
- alarm(0);
- if ((ret == -1) && (errno == EINTR)) {
- /* Alarm expired, time to unpark the heads */
- continue;
- }
-
- if (ret != sizeof(count)) {
- perror("read");
- break;
- }
-
- protect(21);
- set_led(1);
- if (1 || on_ac() || lid_open())
- alarm(2);
- else
- alarm(20);
- }
-
- close(fd);
- return EXIT_SUCCESS;
-}
--
1.7.9.5
next prev parent reply other threads:[~2014-05-03 10:49 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-03 10:47 [PATCH 0/2] Dell Latitude freefall driver (ACPI SMO8800/SMO8810) Pali Rohár
2014-05-03 10:47 ` [PATCH 1/2] platform: x86: dell-smo8800: " Pali Rohár
2014-05-07 16:29 ` One Thousand Gnomes
2014-05-20 7:00 ` Valdis.Kletnieks
2014-05-20 8:56 ` Pali Rohár
2014-05-20 18:02 ` Valdis.Kletnieks
2014-05-20 18:10 ` Pali Rohár
2014-05-20 18:36 ` Valdis.Kletnieks
2014-05-22 11:15 ` [PATCH v2] " Pali Rohár
2014-05-28 13:31 ` Pali Rohár
2014-06-06 10:24 ` Pali Rohár
2014-05-03 10:47 ` Pali Rohár [this message]
2014-06-11 8:02 ` [PATCH v2] Documentation: Rename hpfall.c => freefall.c, fixes for Dell Pali Rohár
2014-06-14 8:53 ` Pavel Machek
2014-06-16 11:55 ` Pali Rohár
2014-06-27 19:08 ` Pali Rohár
2014-06-27 20:25 ` Randy Dunlap
2014-06-29 2:12 ` Randy Dunlap
2014-07-07 18:15 ` Pali Rohár
2014-07-08 22:49 ` Randy Dunlap
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1399114077-19314-3-git-send-email-pali.rohar@gmail.com \
--to=pali.rohar@gmail.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=matthew.garrett@nebula.com \
--cc=platform-driver-x86@vger.kernel.org \
--cc=rdunlap@infradead.org \
--cc=sonal.santan@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).