* [PATCH 0/2] sched: Idle load balance fixes
@ 2014-04-28 22:45 Jason Low
2014-04-28 22:45 ` [PATCH 1/2] sched: Fix updating rq->max_idle_balance_cost and rq->next_balance in idle_balance() Jason Low
` (2 more replies)
0 siblings, 3 replies; 15+ messages in thread
From: Jason Low @ 2014-04-28 22:45 UTC (permalink / raw)
To: mingo, peterz, jason.low2
Cc: linux-kernel, daniel.lezcano, alex.shi, preeti, efault,
vincent.guittot, morten.rasmussen, aswin
[Resending to LKML]
This patchset includes fixes relating to idle_balance() and
rebalance_domains(). These apply on top of the following patches:
https://lkml.org/lkml/2014/4/23/767
https://lkml.org/lkml/2014/4/23/764
Patch #1 addresses an issue introduced by commit e5fc6611 which potentially
can cause rq->max_idle_balance_cost and rq->next_balance to not get updated
when it should.
Patch #2 fixes how rq->next_balance gets updated in idle_balance() and
rebalance_domains().
Jason Low (2):
sched: Fix updating rq->max_idle_balance_cost and rq->next_balance in
idle_balance()
sched: Fix next_balance logic in rebalance_domains() and
idle_balance()
kernel/sched/fair.c | 84 ++++++++++++++++++++++++++++++++-------------------
1 files changed, 53 insertions(+), 31 deletions(-)
^ permalink raw reply [flat|nested] 15+ messages in thread* [PATCH 1/2] sched: Fix updating rq->max_idle_balance_cost and rq->next_balance in idle_balance() 2014-04-28 22:45 [PATCH 0/2] sched: Idle load balance fixes Jason Low @ 2014-04-28 22:45 ` Jason Low 2014-05-08 10:42 ` [tip:sched/core] sched: Fix updating rq-> max_idle_balance_cost " tip-bot for Jason Low 2014-04-28 22:45 ` [PATCH 2/2] sched: Fix next_balance logic in rebalance_domains() and idle_balance() Jason Low 2014-04-30 7:54 ` [PATCH 0/2] sched: Idle load balance fixes Peter Zijlstra 2 siblings, 1 reply; 15+ messages in thread From: Jason Low @ 2014-04-28 22:45 UTC (permalink / raw) To: mingo, peterz, jason.low2 Cc: linux-kernel, daniel.lezcano, alex.shi, preeti, efault, vincent.guittot, morten.rasmussen, aswin Commit e5fc6611 can potentially cause rq->max_idle_balance_cost to not be updated, even when load_balance(NEWLY_IDLE) is attempted and the per-sd max cost value is updated. Preeti noticed a similar issue with updating rq->next_balance. In this patch, we fix this by making sure we still check/update those values even if a task gets enqueued while browsing the domains. Cc: daniel.lezcano@linaro.org Cc: alex.shi@linaro.org Cc: efault@gmx.de Cc: vincent.guittot@linaro.org Cc: morten.rasmussen@arm.com Cc: aswin@hp.com Cc: mingo@kernel.org Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Signed-off-by: Jason Low <jason.low2@hp.com> --- kernel/sched/fair.c | 16 ++++++++-------- 1 files changed, 8 insertions(+), 8 deletions(-) diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index af47873..e0f3019 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -6658,6 +6658,7 @@ static int idle_balance(struct rq *this_rq) int this_cpu = this_rq->cpu; idle_enter_fair(this_rq); + /* * We must set idle_stamp _before_ calling idle_balance(), such that we * measure the duration of idle_balance() as idle time. @@ -6714,14 +6715,16 @@ static int idle_balance(struct rq *this_rq) raw_spin_lock(&this_rq->lock); + if (curr_cost > this_rq->max_idle_balance_cost) + this_rq->max_idle_balance_cost = curr_cost; + /* - * While browsing the domains, we released the rq lock. - * A task could have be enqueued in the meantime + * While browsing the domains, we released the rq lock, a task could + * have been enqueued in the meantime. Since we're not going idle, + * pretend we pulled a task. */ - if (this_rq->cfs.h_nr_running && !pulled_task) { + if (this_rq->cfs.h_nr_running && !pulled_task) pulled_task = 1; - goto out; - } if (pulled_task || time_after(jiffies, this_rq->next_balance)) { /* @@ -6731,9 +6734,6 @@ static int idle_balance(struct rq *this_rq) this_rq->next_balance = next_balance; } - if (curr_cost > this_rq->max_idle_balance_cost) - this_rq->max_idle_balance_cost = curr_cost; - out: /* Is there a task of a high priority class? */ if (this_rq->nr_running != this_rq->cfs.h_nr_running) -- 1.7.1 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [tip:sched/core] sched: Fix updating rq-> max_idle_balance_cost and rq->next_balance in idle_balance() 2014-04-28 22:45 ` [PATCH 1/2] sched: Fix updating rq->max_idle_balance_cost and rq->next_balance in idle_balance() Jason Low @ 2014-05-08 10:42 ` tip-bot for Jason Low 0 siblings, 0 replies; 15+ messages in thread From: tip-bot for Jason Low @ 2014-05-08 10:42 UTC (permalink / raw) To: linux-tip-commits Cc: linux-kernel, hpa, mingo, preeti, peterz, jason.low2, tglx Commit-ID: 0e5b5337f0da073e1f17aec3c322ea7826975d0d Gitweb: http://git.kernel.org/tip/0e5b5337f0da073e1f17aec3c322ea7826975d0d Author: Jason Low <jason.low2@hp.com> AuthorDate: Mon, 28 Apr 2014 15:45:54 -0700 Committer: Ingo Molnar <mingo@kernel.org> CommitDate: Wed, 7 May 2014 11:51:36 +0200 sched: Fix updating rq->max_idle_balance_cost and rq->next_balance in idle_balance() The following commit: e5fc66119ec9 ("sched: Fix race in idle_balance()") can potentially cause rq->max_idle_balance_cost to not be updated, even when load_balance(NEWLY_IDLE) is attempted and the per-sd max cost value is updated. Preeti noticed a similar issue with updating rq->next_balance. In this patch, we fix this by making sure we still check/update those values even if a task gets enqueued while browsing the domains. Signed-off-by: Jason Low <jason.low2@hp.com> Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: morten.rasmussen@arm.com Cc: aswin@hp.com Cc: daniel.lezcano@linaro.org Cc: alex.shi@linaro.org Cc: efault@gmx.de Cc: vincent.guittot@linaro.org Link: http://lkml.kernel.org/r/1398725155-7591-2-git-send-email-jason.low2@hp.com Signed-off-by: Ingo Molnar <mingo@kernel.org> --- kernel/sched/fair.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index 7570dd9..0fdb96d 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -6653,6 +6653,7 @@ static int idle_balance(struct rq *this_rq) int this_cpu = this_rq->cpu; idle_enter_fair(this_rq); + /* * We must set idle_stamp _before_ calling idle_balance(), such that we * measure the duration of idle_balance() as idle time. @@ -6705,14 +6706,16 @@ static int idle_balance(struct rq *this_rq) raw_spin_lock(&this_rq->lock); + if (curr_cost > this_rq->max_idle_balance_cost) + this_rq->max_idle_balance_cost = curr_cost; + /* - * While browsing the domains, we released the rq lock. - * A task could have be enqueued in the meantime + * While browsing the domains, we released the rq lock, a task could + * have been enqueued in the meantime. Since we're not going idle, + * pretend we pulled a task. */ - if (this_rq->cfs.h_nr_running && !pulled_task) { + if (this_rq->cfs.h_nr_running && !pulled_task) pulled_task = 1; - goto out; - } if (pulled_task || time_after(jiffies, this_rq->next_balance)) { /* @@ -6722,9 +6725,6 @@ static int idle_balance(struct rq *this_rq) this_rq->next_balance = next_balance; } - if (curr_cost > this_rq->max_idle_balance_cost) - this_rq->max_idle_balance_cost = curr_cost; - out: /* Is there a task of a high priority class? */ if (this_rq->nr_running != this_rq->cfs.h_nr_running && ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 2/2] sched: Fix next_balance logic in rebalance_domains() and idle_balance() 2014-04-28 22:45 [PATCH 0/2] sched: Idle load balance fixes Jason Low 2014-04-28 22:45 ` [PATCH 1/2] sched: Fix updating rq->max_idle_balance_cost and rq->next_balance in idle_balance() Jason Low @ 2014-04-28 22:45 ` Jason Low 2014-05-08 16:59 ` Jason Low 2014-04-30 7:54 ` [PATCH 0/2] sched: Idle load balance fixes Peter Zijlstra 2 siblings, 1 reply; 15+ messages in thread From: Jason Low @ 2014-04-28 22:45 UTC (permalink / raw) To: mingo, peterz, jason.low2 Cc: linux-kernel, daniel.lezcano, alex.shi, preeti, efault, vincent.guittot, morten.rasmussen, aswin Currently, in idle_balance(), we update rq->next_balance when we pull_tasks. However, it is also important to update this in the !pulled_tasks case too. When the CPU is "busy" (the CPU isn't idle), rq->next_balance gets computed using sd->busy_factor (so we increase the balance interval when the CPU is busy). However, when the CPU goes idle, rq->next_balance could still be set to a large value that was computed with the sd->busy_factor. Thus, we need to also update rq->next_balance in idle_balance() in the cases where !pulled_tasks too, so that rq->next_balance gets updated without taking the busy_factor into account when the CPU is about to go idle. This patch makes rq->next_balance get updated independently of whether or not we pulled_task. Also, we add logic to ensure that we always traverse at least 1 of the sched domains to get a proper next_balance value for updating rq->next_balance. Additionally, since load_balance() modifies the sd->balance_interval, we need to re-obtain the sched domain's interval after the call to load_balance() in rebalance_domains() before we update rq->next_balance. This patch adds and uses 2 new helper functions, update_next_balance() and get_sd_balance_interval() to update next_balance and obtain the sched domain's balance_interval. Cc: daniel.lezcano@linaro.org Cc: alex.shi@linaro.org Cc: preeti@linux.vnet.ibm.com Cc: efault@gmx.de Cc: vincent.guittot@linaro.org Cc: morten.rasmussen@arm.com Cc: aswin@hp.com Cc: mingo@kernel.org Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Signed-off-by: Jason Low <jason.low2@hp.com> --- kernel/sched/fair.c | 68 +++++++++++++++++++++++++++++++++----------------- 1 files changed, 45 insertions(+), 23 deletions(-) diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index e0f3019..6d6e9b8 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -6645,17 +6645,44 @@ out: return ld_moved; } +static inline unsigned long +get_sd_balance_interval(struct sched_domain *sd, int cpu_busy) +{ + unsigned long interval = sd->balance_interval; + + if (cpu_busy) + interval *= sd->busy_factor; + + /* scale ms to jiffies */ + interval = msecs_to_jiffies(interval); + interval = clamp(interval, 1UL, max_load_balance_interval); + + return interval; +} + +static inline void +update_next_balance(struct sched_domain *sd, int cpu_busy, unsigned long *next_balance) +{ + unsigned long interval, next; + + interval = get_sd_balance_interval(sd, cpu_busy); + next = sd->last_balance + interval; + + if (time_after(*next_balance, next)) + *next_balance = next; +} + /* * idle_balance is called by schedule() if this_cpu is about to become * idle. Attempts to pull tasks from other CPUs. */ static int idle_balance(struct rq *this_rq) { + unsigned long next_balance = jiffies + HZ; + int this_cpu = this_rq->cpu; struct sched_domain *sd; int pulled_task = 0; - unsigned long next_balance = jiffies + HZ; u64 curr_cost = 0; - int this_cpu = this_rq->cpu; idle_enter_fair(this_rq); @@ -6665,8 +6692,14 @@ static int idle_balance(struct rq *this_rq) */ this_rq->idle_stamp = rq_clock(this_rq); - if (this_rq->avg_idle < sysctl_sched_migration_cost) + if (this_rq->avg_idle < sysctl_sched_migration_cost) { + rcu_read_lock(); + sd = rcu_dereference_check_sched_domain(this_rq->sd); + update_next_balance(sd, 0, &next_balance); + rcu_read_unlock(); + goto out; + } /* * Drop the rq->lock, but keep IRQ/preempt disabled. @@ -6676,15 +6709,16 @@ static int idle_balance(struct rq *this_rq) update_blocked_averages(this_cpu); rcu_read_lock(); for_each_domain(this_cpu, sd) { - unsigned long interval; int continue_balancing = 1; u64 t0, domain_cost; if (!(sd->flags & SD_LOAD_BALANCE)) continue; - if (this_rq->avg_idle < curr_cost + sd->max_newidle_lb_cost) + if (this_rq->avg_idle < curr_cost + sd->max_newidle_lb_cost) { + update_next_balance(sd, 0, &next_balance); break; + } if (sd->flags & SD_BALANCE_NEWIDLE) { t0 = sched_clock_cpu(this_cpu); @@ -6700,9 +6734,7 @@ static int idle_balance(struct rq *this_rq) curr_cost += domain_cost; } - interval = msecs_to_jiffies(sd->balance_interval); - if (time_after(next_balance, sd->last_balance + interval)) - next_balance = sd->last_balance + interval; + update_next_balance(sd, 0, &next_balance); /* * Stop searching for tasks to pull if there are @@ -6726,15 +6758,11 @@ static int idle_balance(struct rq *this_rq) if (this_rq->cfs.h_nr_running && !pulled_task) pulled_task = 1; - if (pulled_task || time_after(jiffies, this_rq->next_balance)) { - /* - * We are going idle. next_balance may be set based on - * a busy processor. So reset next_balance. - */ +out: + /* Move the next balance forward */ + if (time_after(this_rq->next_balance, next_balance)) this_rq->next_balance = next_balance; - } -out: /* Is there a task of a high priority class? */ if (this_rq->nr_running != this_rq->cfs.h_nr_running) pulled_task = -1; @@ -7017,16 +7045,9 @@ static void rebalance_domains(struct rq *rq, enum cpu_idle_type idle) break; } - interval = sd->balance_interval; - if (idle != CPU_IDLE) - interval *= sd->busy_factor; - - /* scale ms to jiffies */ - interval = msecs_to_jiffies(interval); - interval = clamp(interval, 1UL, max_load_balance_interval); + interval = get_sd_balance_interval(sd, idle != CPU_IDLE); need_serialize = sd->flags & SD_SERIALIZE; - if (need_serialize) { if (!spin_trylock(&balancing)) goto out; @@ -7042,6 +7063,7 @@ static void rebalance_domains(struct rq *rq, enum cpu_idle_type idle) idle = idle_cpu(cpu) ? CPU_IDLE : CPU_NOT_IDLE; } sd->last_balance = jiffies; + interval = get_sd_balance_interval(sd, idle != CPU_IDLE); } if (need_serialize) spin_unlock(&balancing); -- 1.7.1 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [PATCH 2/2] sched: Fix next_balance logic in rebalance_domains() and idle_balance() 2014-04-28 22:45 ` [PATCH 2/2] sched: Fix next_balance logic in rebalance_domains() and idle_balance() Jason Low @ 2014-05-08 16:59 ` Jason Low 2014-05-08 17:38 ` Ingo Molnar 2014-05-08 18:06 ` [PATCH 2/2] sched: Fix " Peter Zijlstra 0 siblings, 2 replies; 15+ messages in thread From: Jason Low @ 2014-05-08 16:59 UTC (permalink / raw) To: mingo, peterz, jason.low2 Cc: peterz, linux-kernel, daniel.lezcano, alex.shi, preeti, efault, vincent.guittot, morten.rasmussen, aswin On Mon, 2014-04-28 at 15:45 -0700, Jason Low wrote: > Currently, in idle_balance(), we update rq->next_balance when we pull_tasks. > However, it is also important to update this in the !pulled_tasks case too. > > When the CPU is "busy" (the CPU isn't idle), rq->next_balance gets computed > using sd->busy_factor (so we increase the balance interval when the CPU is > busy). However, when the CPU goes idle, rq->next_balance could still be set > to a large value that was computed with the sd->busy_factor. > > Thus, we need to also update rq->next_balance in idle_balance() in the cases > where !pulled_tasks too, so that rq->next_balance gets updated without taking > the busy_factor into account when the CPU is about to go idle. > > This patch makes rq->next_balance get updated independently of whether or > not we pulled_task. Also, we add logic to ensure that we always traverse > at least 1 of the sched domains to get a proper next_balance value for > updating rq->next_balance. > > Additionally, since load_balance() modifies the sd->balance_interval, we > need to re-obtain the sched domain's interval after the call to > load_balance() in rebalance_domains() before we update rq->next_balance. > > This patch adds and uses 2 new helper functions, update_next_balance() and > get_sd_balance_interval() to update next_balance and obtain the sched > domain's balance_interval. Hi Peter, I noticed that patch 1 is in tip, but not this patch 2. I was wondering what the current status with this [PATCH 2/2] is at the moment. ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 2/2] sched: Fix next_balance logic in rebalance_domains() and idle_balance() 2014-05-08 16:59 ` Jason Low @ 2014-05-08 17:38 ` Ingo Molnar 2014-05-08 18:15 ` Jason Low 2014-05-08 22:14 ` Jason Low 2014-05-08 18:06 ` [PATCH 2/2] sched: Fix " Peter Zijlstra 1 sibling, 2 replies; 15+ messages in thread From: Ingo Molnar @ 2014-05-08 17:38 UTC (permalink / raw) To: Jason Low Cc: peterz, linux-kernel, daniel.lezcano, alex.shi, preeti, efault, vincent.guittot, morten.rasmussen, aswin [-- Attachment #1: Type: text/plain, Size: 7839 bytes --] * Jason Low <jason.low2@hp.com> wrote: > On Mon, 2014-04-28 at 15:45 -0700, Jason Low wrote: > > Currently, in idle_balance(), we update rq->next_balance when we pull_tasks. > > However, it is also important to update this in the !pulled_tasks case too. > > > > When the CPU is "busy" (the CPU isn't idle), rq->next_balance gets computed > > using sd->busy_factor (so we increase the balance interval when the CPU is > > busy). However, when the CPU goes idle, rq->next_balance could still be set > > to a large value that was computed with the sd->busy_factor. > > > > Thus, we need to also update rq->next_balance in idle_balance() in the cases > > where !pulled_tasks too, so that rq->next_balance gets updated without taking > > the busy_factor into account when the CPU is about to go idle. > > > > This patch makes rq->next_balance get updated independently of whether or > > not we pulled_task. Also, we add logic to ensure that we always traverse > > at least 1 of the sched domains to get a proper next_balance value for > > updating rq->next_balance. > > > > Additionally, since load_balance() modifies the sd->balance_interval, we > > need to re-obtain the sched domain's interval after the call to > > load_balance() in rebalance_domains() before we update rq->next_balance. > > > > This patch adds and uses 2 new helper functions, update_next_balance() and > > get_sd_balance_interval() to update next_balance and obtain the sched > > domain's balance_interval. > > > Hi Peter, > > I noticed that patch 1 is in tip, but not this patch 2. I was wondering > what the current status with this [PATCH 2/2] is at the moment. It was crashing the bootup with the attached config, it gave the splat attached below. (ignore the line duplication, it's a serial logging artifact.) Thanks, Ingo EXT3-fs (sda1): write access will be enabled during recovery EXT3-fs (sda1): write access will be enabled during recovery BUG: unable to handle kernel BUG: unable to handle kernel NULL pointer dereferenceNULL pointer dereference at 00000048 at 00000048 IP:IP: [<7905dbbe>] pick_next_task_fair+0x1ae/0x480 [<7905dbbe>] pick_next_task_fair+0x1ae/0x480 *pde = 00000000 *pde = 00000000 Oops: 0000 [#1] Oops: 0000 [#1] SMP SMP Modules linked in:Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-rc4-01965-g80afea9-dirty #234750 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-rc4-01965-g80afea9-dirty #234750 Hardware name: System manufacturer System Product Name/A8N-E, BIOS ASUS A8N-E ACPI BIOS Revision 1008 08/22/2005 Hardware name: System manufacturer System Product Name/A8N-E, BIOS ASUS A8N-E ACPI BIOS Revision 1008 08/22/2005 task: 90848000 ti: 90850000 task.ti: 90850000 task: 90848000 ti: 90850000 task.ti: 90850000 EIP: 0060:[<7905dbbe>] EFLAGS: 00010082 CPU: 0 EIP: 0060:[<7905dbbe>] EFLAGS: 00010082 CPU: 0 EIP is at pick_next_task_fair+0x1ae/0x480 EIP is at pick_next_task_fair+0x1ae/0x480 EAX: 00000001 EBX: 00000000 ECX: 90848484 EDX: 00000000 EAX: 00000001 EBX: 00000000 ECX: 90848484 EDX: 00000000 ESI: 00000000 EDI: 97fdd480 EBP: 90851b20 ESP: 90851adc ESI: 00000000 EDI: 97fdd480 EBP: 90851b20 ESP: 90851adc DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 CR0: 8005003b CR2: 00000048 CR3: 020fb000 CR4: 00000690 CR0: 8005003b CR2: 00000048 CR3: 020fb000 CR4: 00000690 Stack: Stack: 00000002 00000002 00000000 00000000 00000000 00000000 7905db8b 7905db8b 90848000 90848000 7a0ee480 7a0ee480 90848000 90848000 79b49f00 79b49f00 00000000 00000000 790539a2 790539a2 00000001 00000001 ffff30df ffff30df 00000000 00000000 02039687 02039687 97fdd480 97fdd480 00000000 00000000 9084824c 9084824c 90851b9c 90851b9c 79b3c7b0 79b3c7b0 00468017 00468017 00000000 00000000 02039687 02039687 90848000 90848000 00000000 00000000 Call Trace: Call Trace: [<7905db8b>] ? pick_next_task_fair+0x17b/0x480 [<7905db8b>] ? pick_next_task_fair+0x17b/0x480 [<790539a2>] ? dequeue_task+0x22/0x30 [<790539a2>] ? dequeue_task+0x22/0x30 [<79b3c7b0>] __schedule+0x210/0x550 [<79b3c7b0>] __schedule+0x210/0x550 [<79068c99>] ? mark_held_locks+0x69/0x80 [<79068c99>] ? mark_held_locks+0x69/0x80 [<79b400c5>] ? _raw_spin_unlock_irqrestore+0x45/0x50 [<79b400c5>] ? _raw_spin_unlock_irqrestore+0x45/0x50 [<79068deb>] ? trace_hardirqs_on+0xb/0x10 [<79068deb>] ? trace_hardirqs_on+0xb/0x10 [<790b5210>] ? wait_on_page_read+0x40/0x40 [<790b5210>] ? wait_on_page_read+0x40/0x40 [<79b3cdc5>] io_schedule+0x85/0xa0 [<79b3cdc5>] io_schedule+0x85/0xa0 [<790b5218>] sleep_on_page+0x8/0x10 [<790b5218>] sleep_on_page+0x8/0x10 [<79b3cffc>] __wait_on_bit+0x3c/0x70 [<79b3cffc>] __wait_on_bit+0x3c/0x70 [<790b5210>] ? wait_on_page_read+0x40/0x40 [<790b5210>] ? wait_on_page_read+0x40/0x40 [<790b5066>] wait_on_page_bit+0x86/0xa0 [<790b5066>] wait_on_page_bit+0x86/0xa0 [<79062590>] ? autoremove_wake_function+0x40/0x40 [<79062590>] ? autoremove_wake_function+0x40/0x40 [<790b5107>] filemap_fdatawait_range+0x87/0x150 [<790b5107>] filemap_fdatawait_range+0x87/0x150 [<790b6103>] filemap_fdatawait+0xc3/0xd0 [<790b6103>] filemap_fdatawait+0xc3/0xd0 [<790b6f24>] ? filemap_write_and_wait+0x44/0x80 [<790b6f24>] ? filemap_write_and_wait+0x44/0x80 [<790b6f24>] filemap_write_and_wait+0x44/0x80 [<790b6f24>] filemap_write_and_wait+0x44/0x80 [<7911edc5>] __sync_blockdev+0x25/0x50 [<7911edc5>] __sync_blockdev+0x25/0x50 [<7911edfd>] sync_blockdev+0xd/0x10 [<7911edfd>] sync_blockdev+0xd/0x10 [<791bdbf8>] journal_recover+0x168/0x1b0 [<791bdbf8>] journal_recover+0x168/0x1b0 [<791c0e87>] journal_load+0x47/0x80 [<791c0e87>] journal_load+0x47/0x80 [<79176589>] ext3_fill_super+0xff9/0x1910 [<79176589>] ext3_fill_super+0xff9/0x1910 [<790f0001>] ? get_empty_filp+0xb1/0x1c0 [<790f0001>] ? get_empty_filp+0xb1/0x1c0 [<79175590>] ? ext3_setup_super+0x220/0x220 [<79175590>] ? ext3_setup_super+0x220/0x220 [<790f1459>] mount_bdev+0x139/0x1a0 [<790f1459>] mount_bdev+0x139/0x1a0 [<79175590>] ? ext3_setup_super+0x220/0x220 [<79175590>] ? ext3_setup_super+0x220/0x220 [<79172fca>] ext3_mount+0x1a/0x20 [<79172fca>] ext3_mount+0x1a/0x20 [<79175590>] ? ext3_setup_super+0x220/0x220 [<79175590>] ? ext3_setup_super+0x220/0x220 [<790f1ce3>] mount_fs+0x63/0xe0 [<790f1ce3>] mount_fs+0x63/0xe0 [<790cd8ea>] ? __alloc_percpu+0xa/0x10 [<790cd8ea>] ? __alloc_percpu+0xa/0x10 [<7910a00f>] vfs_kern_mount+0x4f/0x120 [<7910a00f>] vfs_kern_mount+0x4f/0x120 [<7910c9cf>] do_mount+0x7cf/0x940 [<7910c9cf>] do_mount+0x7cf/0x940 [<790c9a9c>] ? strndup_user+0x2c/0xb0 [<790c9a9c>] ? strndup_user+0x2c/0xb0 [<7910cddb>] SyS_mount+0x8b/0xd0 [<7910cddb>] SyS_mount+0x8b/0xd0 [<7a070dbc>] mount_block_root+0xe0/0x25d [<7a070dbc>] mount_block_root+0xe0/0x25d [<7a070f94>] mount_root+0x5b/0x61 [<7a070f94>] mount_root+0x5b/0x61 [<7a0710ab>] prepare_namespace+0x111/0x14b [<7a0710ab>] prepare_namespace+0x111/0x14b [<7a070c08>] kernel_init_freeable+0x17f/0x18c [<7a070c08>] kernel_init_freeable+0x17f/0x18c [<7a070522>] ? do_early_param+0x7a/0x7a [<7a070522>] ? do_early_param+0x7a/0x7a [<79b2c13b>] kernel_init+0xb/0xe0 [<79b2c13b>] kernel_init+0xb/0xe0 [<79b40801>] ret_from_kernel_thread+0x21/0x30 [<79b40801>] ret_from_kernel_thread+0x21/0x30 [<79b2c130>] ? rest_init+0xb0/0xb0 [<79b2c130>] ? rest_init+0xb0/0xb0 Code:Code: 79 79 c7 c7 44 44 24 24 0c 0c 8b 8b db db 05 05 79 79 c7 c7 44 44 24 24 08 08 00 00 00 00 00 00 00 00 c7 c7 44 44 24 24 04 04 00 00 00 00 00 00 00 00 c7 c7 04 04 24 24 02 02 00 00 00 00 00 00 e8 e8 98 98 d0 d0 00 00 00 00 8b 8b 9f 9f a4 a4 04 04 00 00 00 00 <8b> <8b> 43 43 48 48 e8 e8 1a 1a 9c 9c fd fd ff ff 85 85 c0 c0 75 75 02 02 b0 b0 01 01 8b 8b 15 15 98 98 b9 b9 06 06 7a 7a 39 39 EIP: [<7905dbbe>] EIP: [<7905dbbe>] pick_next_task_fair+0x1ae/0x480pick_next_task_fair+0x1ae/0x480 SS:ESP 0068:90851adc [-- Attachment #2: config --] [-- Type: text/plain, Size: 110378 bytes --] # # Automatically generated file; DO NOT EDIT. # Linux/x86_64 3.15.0-rc4 Kernel Configuration # CONFIG_64BIT=y CONFIG_X86_64=y CONFIG_X86=y CONFIG_INSTRUCTION_DECODER=y CONFIG_OUTPUT_FORMAT="elf64-x86-64" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_MMU=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_NEED_SG_DMA_LENGTH=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y CONFIG_ARCH_WANT_GENERAL_HUGETLB=y CONFIG_ZONE_DMA32=y CONFIG_AUDIT_ARCH=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_X86_64_SMP=y CONFIG_X86_HT=y CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" CONFIG_ARCH_SUPPORTS_UPROBES=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_IRQ_WORK=y CONFIG_BUILDTIME_EXTABLE_SORT=y # # General setup # CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_CROSS_COMPILE="" # CONFIG_COMPILE_TEST is not set CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_XZ=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_HAVE_KERNEL_LZ4=y # CONFIG_KERNEL_GZIP is not set # CONFIG_KERNEL_BZIP2 is not set # CONFIG_KERNEL_LZMA is not set # CONFIG_KERNEL_XZ is not set CONFIG_KERNEL_LZO=y # CONFIG_KERNEL_LZ4 is not set CONFIG_DEFAULT_HOSTNAME="(none)" # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_FHANDLE is not set CONFIG_USELIB=y CONFIG_AUDIT=y CONFIG_HAVE_ARCH_AUDITSYSCALL=y # CONFIG_AUDITSYSCALL is not set # # IRQ subsystem # CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_IRQ_SHOW=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_GENERIC_IRQ_CHIP=y CONFIG_IRQ_DOMAIN=y # CONFIG_IRQ_DOMAIN_DEBUG is not set CONFIG_IRQ_FORCED_THREADING=y CONFIG_SPARSE_IRQ=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_ARCH_CLOCKSOURCE_DATA=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y CONFIG_GENERIC_CMOS_UPDATE=y # # Timers subsystem # CONFIG_TICK_ONESHOT=y CONFIG_HZ_PERIODIC=y # CONFIG_NO_HZ_IDLE is not set # CONFIG_NO_HZ_FULL is not set CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y # # CPU/Task time and stats accounting # CONFIG_TICK_CPU_ACCOUNTING=y # CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set # CONFIG_IRQ_TIME_ACCOUNTING is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # # RCU Subsystem # CONFIG_TREE_RCU=y # CONFIG_PREEMPT_RCU is not set CONFIG_RCU_STALL_COMMON=y # CONFIG_RCU_USER_QS is not set CONFIG_RCU_FANOUT=32 CONFIG_RCU_FANOUT_LEAF=16 CONFIG_RCU_FANOUT_EXACT=y # CONFIG_TREE_RCU_TRACE is not set CONFIG_RCU_NOCB_CPU=y # CONFIG_RCU_NOCB_CPU_NONE is not set CONFIG_RCU_NOCB_CPU_ZERO=y # CONFIG_RCU_NOCB_CPU_ALL is not set CONFIG_IKCONFIG=y # CONFIG_IKCONFIG_PROC is not set CONFIG_LOG_BUF_SHIFT=20 CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y CONFIG_ARCH_SUPPORTS_INT128=y CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y CONFIG_CGROUPS=y # CONFIG_CGROUP_DEBUG is not set # CONFIG_CGROUP_FREEZER is not set # CONFIG_CGROUP_DEVICE is not set # CONFIG_CPUSETS is not set CONFIG_CGROUP_CPUACCT=y # CONFIG_RESOURCE_COUNTERS is not set # CONFIG_CGROUP_PERF is not set # CONFIG_CGROUP_SCHED is not set # CONFIG_BLK_CGROUP is not set CONFIG_CHECKPOINT_RESTORE=y CONFIG_NAMESPACES=y CONFIG_UTS_NS=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set CONFIG_PID_NS=y CONFIG_NET_NS=y # CONFIG_SCHED_AUTOGROUP is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_ANON_INODES=y CONFIG_HAVE_UID16=y CONFIG_SYSCTL_EXCEPTION_TRACE=y CONFIG_HAVE_PCSPKR_PLATFORM=y CONFIG_EXPERT=y # CONFIG_UID16 is not set CONFIG_SYSFS_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_PCSPKR_PLATFORM=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y # CONFIG_SIGNALFD is not set # CONFIG_TIMERFD is not set CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y # CONFIG_PCI_QUIRKS is not set CONFIG_EMBEDDED=y CONFIG_HAVE_PERF_EVENTS=y # # Kernel Performance Events And Counters # CONFIG_PERF_EVENTS=y # CONFIG_DEBUG_PERF_USE_VMALLOC is not set CONFIG_VM_EVENT_COUNTERS=y # CONFIG_SLUB_DEBUG is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_SLUB_CPU_PARTIAL=y CONFIG_SYSTEM_TRUSTED_KEYRING=y CONFIG_PROFILING=y CONFIG_OPROFILE=y # CONFIG_OPROFILE_EVENT_MULTIPLEX is not set CONFIG_HAVE_OPROFILE=y CONFIG_OPROFILE_NMI_TIMER=y CONFIG_KPROBES=y CONFIG_JUMP_LABEL=y CONFIG_OPTPROBES=y # CONFIG_UPROBES is not set # CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_ARCH_USE_BUILTIN_BSWAP=y CONFIG_KRETPROBES=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_OPTPROBES=y CONFIG_HAVE_KPROBES_ON_FTRACE=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_DMA_API_DEBUG=y CONFIG_HAVE_HW_BREAKPOINT=y CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y CONFIG_HAVE_USER_RETURN_NOTIFIER=y CONFIG_HAVE_PERF_EVENTS_NMI=y CONFIG_HAVE_PERF_REGS=y CONFIG_HAVE_PERF_USER_STACK_DUMP=y CONFIG_HAVE_ARCH_JUMP_LABEL=y CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y CONFIG_HAVE_CMPXCHG_LOCAL=y CONFIG_HAVE_CMPXCHG_DOUBLE=y CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y CONFIG_HAVE_ARCH_SECCOMP_FILTER=y CONFIG_HAVE_CC_STACKPROTECTOR=y CONFIG_CC_STACKPROTECTOR=y # CONFIG_CC_STACKPROTECTOR_NONE is not set # CONFIG_CC_STACKPROTECTOR_REGULAR is not set CONFIG_CC_STACKPROTECTOR_STRONG=y CONFIG_HAVE_CONTEXT_TRACKING=y CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y CONFIG_HAVE_ARCH_SOFT_DIRTY=y CONFIG_MODULES_USE_ELF_RELA=y CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y CONFIG_OLD_SIGSUSPEND3=y CONFIG_COMPAT_OLD_SIGACTION=y # # GCOV-based kernel profiling # # CONFIG_GCOV_KERNEL is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_FORCE_LOAD=y # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_MODULE_SIG=y CONFIG_MODULE_SIG_FORCE=y # CONFIG_MODULE_SIG_ALL is not set # # Do not forget to sign required modules with scripts/sign-file # # CONFIG_MODULE_SIG_SHA1 is not set CONFIG_MODULE_SIG_SHA224=y # CONFIG_MODULE_SIG_SHA256 is not set # CONFIG_MODULE_SIG_SHA384 is not set # CONFIG_MODULE_SIG_SHA512 is not set CONFIG_MODULE_SIG_HASH="sha224" CONFIG_BLOCK=y CONFIG_BLK_DEV_BSG=y CONFIG_BLK_DEV_BSGLIB=y CONFIG_BLK_DEV_INTEGRITY=y CONFIG_BLK_CMDLINE_PARSER=y # # Partition Types # CONFIG_PARTITION_ADVANCED=y CONFIG_ACORN_PARTITION=y CONFIG_ACORN_PARTITION_CUMANA=y # CONFIG_ACORN_PARTITION_EESOX is not set CONFIG_ACORN_PARTITION_ICS=y CONFIG_ACORN_PARTITION_ADFS=y # CONFIG_ACORN_PARTITION_POWERTEC is not set # CONFIG_ACORN_PARTITION_RISCIX is not set # CONFIG_AIX_PARTITION is not set CONFIG_OSF_PARTITION=y # CONFIG_AMIGA_PARTITION is not set CONFIG_ATARI_PARTITION=y # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y CONFIG_BSD_DISKLABEL=y CONFIG_MINIX_SUBPARTITION=y # CONFIG_SOLARIS_X86_PARTITION is not set CONFIG_UNIXWARE_DISKLABEL=y # CONFIG_LDM_PARTITION is not set # CONFIG_SGI_PARTITION is not set CONFIG_ULTRIX_PARTITION=y CONFIG_SUN_PARTITION=y # CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # CONFIG_SYSV68_PARTITION is not set CONFIG_CMDLINE_PARTITION=y CONFIG_BLOCK_COMPAT=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_DEADLINE=m CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" CONFIG_ASN1=y CONFIG_UNINLINE_SPIN_UNLOCK=y # CONFIG_FREEZER is not set # # Processor type and features # CONFIG_ZONE_DMA=y CONFIG_SMP=y # CONFIG_X86_MPPARSE is not set # CONFIG_X86_EXTENDED_PLATFORM is not set # CONFIG_SCHED_OMIT_FRAME_POINTER is not set CONFIG_KVMTOOL_TEST_ENABLE=y # CONFIG_HYPERVISOR_GUEST is not set CONFIG_NO_BOOTMEM=y # CONFIG_MEMTEST is not set # CONFIG_MK8 is not set # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set # CONFIG_MATOM is not set CONFIG_GENERIC_CPU=y CONFIG_X86_INTERNODE_CACHE_SHIFT=6 CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_TSC=y CONFIG_X86_CMPXCHG64=y CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y CONFIG_PROCESSOR_SELECT=y CONFIG_CPU_SUP_INTEL=y # CONFIG_CPU_SUP_AMD is not set # CONFIG_CPU_SUP_CENTAUR is not set CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_DMI=y # CONFIG_CALGARY_IOMMU is not set CONFIG_SWIOTLB=y CONFIG_IOMMU_HELPER=y # CONFIG_MAXSMP is not set CONFIG_NR_CPUS=8 CONFIG_SCHED_SMT=y # CONFIG_SCHED_MC is not set # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y # CONFIG_X86_MCE is not set # CONFIG_X86_16BIT is not set CONFIG_I8K=m CONFIG_MICROCODE=y CONFIG_MICROCODE_INTEL=y # CONFIG_MICROCODE_AMD is not set CONFIG_MICROCODE_OLD_INTERFACE=y # CONFIG_MICROCODE_INTEL_EARLY is not set # CONFIG_MICROCODE_AMD_EARLY is not set # CONFIG_X86_MSR is not set CONFIG_X86_CPUID=y CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_ARCH_DMA_ADDR_T_64BIT=y CONFIG_DIRECT_GBPAGES=y # CONFIG_NUMA is not set CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y CONFIG_SPARSEMEM_VMEMMAP=y CONFIG_HAVE_MEMBLOCK=y CONFIG_HAVE_MEMBLOCK_NODE_MAP=y CONFIG_ARCH_DISCARD_MEMBLOCK=y CONFIG_MEMORY_ISOLATION=y # CONFIG_HAVE_BOOTMEM_INFO_NODE is not set # CONFIG_MEMORY_HOTPLUG is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y CONFIG_BALLOON_COMPACTION=y CONFIG_COMPACTION=y CONFIG_MIGRATION=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_NEED_BOUNCE_POOL=y CONFIG_VIRT_TO_BUS=y CONFIG_KSM=y CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_TRANSPARENT_HUGEPAGE=y # CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y # CONFIG_CROSS_MEMORY_ATTACH is not set # CONFIG_CLEANCACHE is not set CONFIG_CMA=y # CONFIG_CMA_DEBUG is not set # CONFIG_ZBUD is not set CONFIG_MEM_SOFT_DIRTY=y CONFIG_ZSMALLOC=y # CONFIG_PGTABLE_MAPPING is not set CONFIG_GENERIC_EARLY_IOREMAP=y # CONFIG_X86_CHECK_BIOS_CORRUPTION is not set CONFIG_X86_RESERVE_LOW=64 CONFIG_MTRR=y CONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 CONFIG_X86_PAT=y CONFIG_ARCH_USES_PG_UNCACHED=y # CONFIG_ARCH_RANDOM is not set # CONFIG_X86_SMAP is not set # CONFIG_SECCOMP is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set CONFIG_HZ_300=y # CONFIG_HZ_1000 is not set CONFIG_HZ=300 CONFIG_SCHED_HRTICK=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x1000000 # CONFIG_RELOCATABLE is not set CONFIG_PHYSICAL_ALIGN=0x200000 # CONFIG_HOTPLUG_CPU is not set # CONFIG_COMPAT_VDSO is not set # CONFIG_CMDLINE_BOOL is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y # # Power management and ACPI options # # CONFIG_SUSPEND is not set CONFIG_PM_RUNTIME=y CONFIG_PM=y CONFIG_PM_DEBUG=y CONFIG_PM_ADVANCED_DEBUG=y # CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set # CONFIG_ACPI is not set CONFIG_SFI=y # # CPU Frequency scaling # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_COMMON=y CONFIG_CPU_FREQ_STAT=m # CONFIG_CPU_FREQ_STAT_DETAILS is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y # CONFIG_CPU_FREQ_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m # # x86 CPU frequency scaling drivers # # CONFIG_X86_INTEL_PSTATE is not set CONFIG_X86_P4_CLOCKMOD=m # # shared options # CONFIG_X86_SPEEDSTEP_LIB=m # # CPU Idle # # CONFIG_CPU_IDLE is not set # CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set # # Memory power savings # # CONFIG_I7300_IDLE is not set # # Bus options (PCI etc.) # CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_DOMAINS=y # CONFIG_PCI_CNB20LE_QUIRK is not set # CONFIG_PCIEPORTBUS is not set CONFIG_PCI_MSI=y # CONFIG_PCI_DEBUG is not set CONFIG_PCI_REALLOC_ENABLE_AUTO=y # CONFIG_PCI_STUB is not set CONFIG_HT_IRQ=y CONFIG_PCI_ATS=y CONFIG_PCI_IOV=y # CONFIG_PCI_PRI is not set CONFIG_PCI_PASID=y CONFIG_PCI_LABEL=y # # PCI host controller drivers # CONFIG_ISA_DMA_API=y CONFIG_PCCARD=y CONFIG_PCMCIA=y # CONFIG_PCMCIA_LOAD_CIS is not set CONFIG_CARDBUS=y # # PC-card bridges # CONFIG_YENTA=m # CONFIG_YENTA_O2 is not set # CONFIG_YENTA_RICOH is not set CONFIG_YENTA_TI=y CONFIG_YENTA_ENE_TUNE=y # CONFIG_YENTA_TOSHIBA is not set CONFIG_PD6729=y CONFIG_I82092=m CONFIG_PCCARD_NONSTATIC=y CONFIG_HOTPLUG_PCI=y # CONFIG_HOTPLUG_PCI_CPCI is not set # CONFIG_HOTPLUG_PCI_SHPC is not set # CONFIG_RAPIDIO is not set CONFIG_X86_SYSFB=y # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_BINFMT_SCRIPT is not set # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m CONFIG_COREDUMP=y CONFIG_IA32_EMULATION=y # CONFIG_IA32_AOUT is not set # CONFIG_X86_X32 is not set CONFIG_COMPAT=y CONFIG_COMPAT_FOR_U64_ALIGNMENT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_KEYS_COMPAT=y CONFIG_X86_DEV_DMA_OPS=y CONFIG_NET=y CONFIG_COMPAT_NETLINK_MESSAGES=y # # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_DIAG is not set CONFIG_UNIX=y CONFIG_UNIX_DIAG=m CONFIG_XFRM=y CONFIG_XFRM_ALGO=y CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y CONFIG_XFRM_STATISTICS=y # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_ROUTE_CLASSID=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y # CONFIG_IP_PNP_BOOTP is not set # CONFIG_IP_PNP_RARP is not set CONFIG_NET_IPIP=m CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IP_TUNNEL=y CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y # CONFIG_NET_IPVTI is not set CONFIG_INET_AH=y CONFIG_INET_ESP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_LRO=m # CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set CONFIG_IPV6=m # CONFIG_IPV6_ROUTER_PREF is not set # CONFIG_IPV6_OPTIMISTIC_DAD is not set # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set # CONFIG_INET6_IPCOMP is not set # CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set CONFIG_INET6_XFRM_MODE_TRANSPORT=m CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set # CONFIG_IPV6_VTI is not set CONFIG_IPV6_SIT=m # CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_GRE is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_IPV6_MROUTE is not set # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NET_PTP_CLASSIFY=y CONFIG_NETWORK_PHY_TIMESTAMPING=y # CONFIG_NETFILTER is not set CONFIG_IP_DCCP=y # # DCCP CCIDs Configuration # CONFIG_IP_DCCP_CCID2_DEBUG=y # CONFIG_IP_DCCP_CCID3 is not set # # DCCP Kernel Hacking # CONFIG_IP_DCCP_DEBUG=y # CONFIG_NET_DCCPPROBE is not set CONFIG_IP_SCTP=m # CONFIG_NET_SCTPPROBE is not set # CONFIG_SCTP_DBG_OBJCNT is not set # CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y # CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set CONFIG_SCTP_COOKIE_HMAC_MD5=y CONFIG_SCTP_COOKIE_HMAC_SHA1=y # CONFIG_RDS is not set CONFIG_TIPC=m CONFIG_TIPC_PORTS=8191 # CONFIG_ATM is not set CONFIG_L2TP=m CONFIG_L2TP_DEBUGFS=m # CONFIG_L2TP_V3 is not set CONFIG_STP=m CONFIG_MRP=m CONFIG_BRIDGE=m CONFIG_BRIDGE_IGMP_SNOOPING=y CONFIG_BRIDGE_VLAN_FILTERING=y CONFIG_HAVE_NET_DSA=y CONFIG_NET_DSA=y CONFIG_NET_DSA_TAG_DSA=y CONFIG_NET_DSA_TAG_TRAILER=y CONFIG_VLAN_8021Q=m # CONFIG_VLAN_8021Q_GVRP is not set CONFIG_VLAN_8021Q_MVRP=y # CONFIG_DECNET is not set CONFIG_LLC=y CONFIG_LLC2=y # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set CONFIG_LAPB=m CONFIG_PHONET=m CONFIG_IEEE802154=m # CONFIG_IEEE802154_6LOWPAN is not set CONFIG_MAC802154=m CONFIG_NET_SCHED=y # # Queueing/Scheduling # # CONFIG_NET_SCH_CBQ is not set CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m # CONFIG_NET_SCH_PRIO is not set CONFIG_NET_SCH_MULTIQ=m CONFIG_NET_SCH_RED=y # CONFIG_NET_SCH_SFB is not set CONFIG_NET_SCH_SFQ=m # CONFIG_NET_SCH_TEQL is not set # CONFIG_NET_SCH_TBF is not set CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=y # CONFIG_NET_SCH_DRR is not set # CONFIG_NET_SCH_MQPRIO is not set CONFIG_NET_SCH_CHOKE=y CONFIG_NET_SCH_QFQ=m # CONFIG_NET_SCH_CODEL is not set CONFIG_NET_SCH_FQ_CODEL=m CONFIG_NET_SCH_FQ=y # CONFIG_NET_SCH_HHF is not set CONFIG_NET_SCH_PIE=m CONFIG_NET_SCH_PLUG=m # # Classification # CONFIG_NET_CLS=y # CONFIG_NET_CLS_BASIC is not set CONFIG_NET_CLS_TCINDEX=m CONFIG_NET_CLS_ROUTE4=y # CONFIG_NET_CLS_FW is not set # CONFIG_NET_CLS_U32 is not set # CONFIG_NET_CLS_RSVP is not set CONFIG_NET_CLS_RSVP6=m CONFIG_NET_CLS_FLOW=y # CONFIG_NET_CLS_CGROUP is not set # CONFIG_NET_CLS_BPF is not set # CONFIG_NET_EMATCH is not set # CONFIG_NET_CLS_ACT is not set CONFIG_NET_SCH_FIFO=y # CONFIG_DCB is not set CONFIG_DNS_RESOLVER=y CONFIG_BATMAN_ADV=y # CONFIG_BATMAN_ADV_BLA is not set CONFIG_BATMAN_ADV_DAT=y # CONFIG_BATMAN_ADV_NC is not set # CONFIG_BATMAN_ADV_MCAST is not set CONFIG_BATMAN_ADV_DEBUG=y CONFIG_OPENVSWITCH=y # CONFIG_OPENVSWITCH_VXLAN is not set CONFIG_VSOCKETS=y CONFIG_VMWARE_VMCI_VSOCKETS=m CONFIG_NETLINK_MMAP=y CONFIG_NETLINK_DIAG=m CONFIG_NET_MPLS_GSO=y # CONFIG_HSR is not set CONFIG_RPS=y CONFIG_RFS_ACCEL=y CONFIG_XPS=y CONFIG_CGROUP_NET_PRIO=y CONFIG_CGROUP_NET_CLASSID=y CONFIG_NET_RX_BUSY_POLL=y CONFIG_BQL=y # CONFIG_BPF_JIT is not set CONFIG_NET_FLOW_LIMIT=y # # Network testing # CONFIG_NET_PKTGEN=m # CONFIG_NET_TCPPROBE is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set CONFIG_IRDA=y # # IrDA protocols # CONFIG_IRLAN=y CONFIG_IRNET=m CONFIG_IRCOMM=y CONFIG_IRDA_ULTRA=y # # IrDA options # # CONFIG_IRDA_CACHE_LAST_LSAP is not set CONFIG_IRDA_FAST_RR=y # CONFIG_IRDA_DEBUG is not set # # Infrared-port device drivers # # # SIR device drivers # # CONFIG_IRTTY_SIR is not set # # Dongle support # CONFIG_KINGSUN_DONGLE=m CONFIG_KSDAZZLE_DONGLE=m # CONFIG_KS959_DONGLE is not set # # FIR device drivers # CONFIG_USB_IRDA=y # CONFIG_SIGMATEL_FIR is not set CONFIG_NSC_FIR=y CONFIG_WINBOND_FIR=y CONFIG_SMC_IRCC_FIR=y # CONFIG_ALI_FIR is not set # CONFIG_VLSI_FIR is not set # CONFIG_VIA_FIR is not set CONFIG_MCS_FIR=y CONFIG_BT=m # CONFIG_BT_6LOWPAN is not set CONFIG_BT_RFCOMM=m # CONFIG_BT_RFCOMM_TTY is not set # CONFIG_BT_BNEP is not set CONFIG_BT_HIDP=m # # Bluetooth device drivers # # CONFIG_BT_HCIBTUSB is not set CONFIG_BT_HCIBTSDIO=m # CONFIG_BT_HCIUART is not set CONFIG_BT_HCIBCM203X=m # CONFIG_BT_HCIBPA10X is not set # CONFIG_BT_HCIBFUSB is not set CONFIG_BT_HCIDTL1=m CONFIG_BT_HCIBT3C=m CONFIG_BT_HCIBLUECARD=m CONFIG_BT_HCIBTUART=m CONFIG_BT_HCIVHCI=m # CONFIG_BT_MRVL is not set CONFIG_BT_WILINK=m CONFIG_AF_RXRPC=m CONFIG_AF_RXRPC_DEBUG=y # CONFIG_RXKAD is not set CONFIG_WIRELESS=y CONFIG_WIRELESS_EXT=y CONFIG_WEXT_CORE=y CONFIG_WEXT_PROC=y CONFIG_WEXT_SPY=y CONFIG_WEXT_PRIV=y CONFIG_CFG80211=m CONFIG_NL80211_TESTMODE=y CONFIG_CFG80211_DEVELOPER_WARNINGS=y # CONFIG_CFG80211_REG_DEBUG is not set # CONFIG_CFG80211_CERTIFICATION_ONUS is not set CONFIG_CFG80211_DEFAULT_PS=y # CONFIG_CFG80211_DEBUGFS is not set CONFIG_CFG80211_INTERNAL_REGDB=y # CONFIG_CFG80211_WEXT is not set CONFIG_LIB80211=m CONFIG_LIB80211_CRYPT_WEP=m CONFIG_LIB80211_CRYPT_CCMP=m CONFIG_LIB80211_CRYPT_TKIP=m # CONFIG_LIB80211_DEBUG is not set CONFIG_MAC80211=m # CONFIG_MAC80211_RC_PID is not set # CONFIG_MAC80211_RC_MINSTREL is not set CONFIG_MAC80211_RC_DEFAULT="" # # Some wireless drivers require a rate control algorithm # CONFIG_MAC80211_MESH=y CONFIG_MAC80211_LEDS=y CONFIG_MAC80211_DEBUGFS=y CONFIG_MAC80211_MESSAGE_TRACING=y CONFIG_MAC80211_DEBUG_MENU=y # CONFIG_MAC80211_NOINLINE is not set # CONFIG_MAC80211_VERBOSE_DEBUG is not set # CONFIG_MAC80211_MLME_DEBUG is not set # CONFIG_MAC80211_STA_DEBUG is not set # CONFIG_MAC80211_HT_DEBUG is not set # CONFIG_MAC80211_IBSS_DEBUG is not set # CONFIG_MAC80211_PS_DEBUG is not set CONFIG_MAC80211_MPL_DEBUG=y CONFIG_MAC80211_MPATH_DEBUG=y CONFIG_MAC80211_MHWMP_DEBUG=y # CONFIG_MAC80211_MESH_SYNC_DEBUG is not set # CONFIG_MAC80211_MESH_CSA_DEBUG is not set CONFIG_MAC80211_MESH_PS_DEBUG=y # CONFIG_MAC80211_TDLS_DEBUG is not set CONFIG_MAC80211_DEBUG_COUNTERS=y CONFIG_WIMAX=m CONFIG_WIMAX_DEBUG_LEVEL=8 # CONFIG_RFKILL is not set # CONFIG_RFKILL_REGULATOR is not set CONFIG_NET_9P=y CONFIG_NET_9P_VIRTIO=y CONFIG_NET_9P_DEBUG=y CONFIG_CAIF=y CONFIG_CAIF_DEBUG=y CONFIG_CAIF_NETDEV=m CONFIG_CAIF_USB=m CONFIG_CEPH_LIB=y CONFIG_CEPH_LIB_PRETTYDEBUG=y # CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set # CONFIG_NFC is not set CONFIG_HAVE_BPF_JIT=y # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="" # CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_EXTRA_FIRMWARE="" CONFIG_FW_LOADER_USER_HELPER=y CONFIG_DEBUG_DRIVER=y CONFIG_DEBUG_DEVRES=y # CONFIG_SYS_HYPERVISOR is not set # CONFIG_GENERIC_CPU_DEVICES is not set CONFIG_GENERIC_CPU_AUTOPROBE=y CONFIG_REGMAP=y CONFIG_REGMAP_I2C=y CONFIG_REGMAP_MMIO=m CONFIG_REGMAP_IRQ=y CONFIG_DMA_SHARED_BUFFER=y # # Bus devices # CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y # CONFIG_MTD is not set CONFIG_PARPORT=m CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y # CONFIG_PARPORT_PC is not set # CONFIG_PARPORT_GSC is not set CONFIG_PARPORT_AX88796=m # CONFIG_PARPORT_1284 is not set CONFIG_PARPORT_NOT_PC=y CONFIG_BLK_DEV=y CONFIG_BLK_DEV_NULL_BLK=y # CONFIG_BLK_DEV_FD is not set CONFIG_BLK_DEV_PCIESSD_MTIP32XX=y CONFIG_ZRAM=y CONFIG_ZRAM_LZ4_COMPRESS=y # CONFIG_ZRAM_DEBUG is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set CONFIG_BLK_DEV_UMEM=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_DRBD is not set CONFIG_BLK_DEV_NBD=y # CONFIG_BLK_DEV_NVME is not set # CONFIG_BLK_DEV_SKD is not set CONFIG_BLK_DEV_SX8=y # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set CONFIG_ATA_OVER_ETH=y CONFIG_VIRTIO_BLK=y # CONFIG_BLK_DEV_HD is not set CONFIG_BLK_DEV_RBD=m # CONFIG_BLK_DEV_RSXX is not set # # Misc devices # # CONFIG_SENSORS_LIS3LV02D is not set CONFIG_AD525X_DPOT=m CONFIG_AD525X_DPOT_I2C=m CONFIG_DUMMY_IRQ=m CONFIG_IBM_ASM=m CONFIG_PHANTOM=y CONFIG_SGI_IOC4=m CONFIG_TIFM_CORE=y CONFIG_TIFM_7XX1=m # CONFIG_ICS932S401 is not set CONFIG_ATMEL_SSC=y CONFIG_ENCLOSURE_SERVICES=m # CONFIG_CS5535_MFGPT is not set CONFIG_HP_ILO=m CONFIG_APDS9802ALS=y # CONFIG_ISL29003 is not set # CONFIG_ISL29020 is not set CONFIG_SENSORS_TSL2550=y CONFIG_SENSORS_BH1780=m # CONFIG_SENSORS_BH1770 is not set # CONFIG_SENSORS_APDS990X is not set # CONFIG_HMC6352 is not set CONFIG_DS1682=y # CONFIG_BMP085_I2C is not set CONFIG_PCH_PHUB=m CONFIG_USB_SWITCH_FSA9480=m # CONFIG_SRAM is not set CONFIG_C2PORT=y CONFIG_C2PORT_DURAMAR_2150=y # # EEPROM support # CONFIG_EEPROM_AT24=y CONFIG_EEPROM_LEGACY=m # CONFIG_EEPROM_MAX6875 is not set CONFIG_EEPROM_93CX6=m CONFIG_CB710_CORE=m # CONFIG_CB710_DEBUG is not set CONFIG_CB710_DEBUG_ASSUMPTIONS=y # # Texas Instruments shared transport line discipline # CONFIG_TI_ST=m # CONFIG_SENSORS_LIS3_I2C is not set # # Altera FPGA firmware download module # CONFIG_ALTERA_STAPL=y CONFIG_VMWARE_VMCI=m # # Intel MIC Host Driver # # CONFIG_INTEL_MIC_HOST is not set # # Intel MIC Card Driver # # CONFIG_INTEL_MIC_CARD is not set # CONFIG_GENWQE is not set CONFIG_ECHO=m CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y CONFIG_SCSI_TGT=y CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set CONFIG_CHR_DEV_OSST=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set CONFIG_SCSI_ENCLOSURE=m # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set CONFIG_SCSI_SCAN_ASYNC=y # # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_FC_TGT_ATTRS is not set CONFIG_SCSI_ISCSI_ATTRS=y CONFIG_SCSI_SAS_ATTRS=y CONFIG_SCSI_SAS_LIBSAS=y # CONFIG_SCSI_SAS_ATA is not set CONFIG_SCSI_SAS_HOST_SMP=y CONFIG_SCSI_SRP_ATTRS=y # CONFIG_SCSI_SRP_TGT_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m CONFIG_ISCSI_BOOT_SYSFS=y CONFIG_SCSI_CXGB3_ISCSI=m # CONFIG_SCSI_CXGB4_ISCSI is not set CONFIG_SCSI_BNX2_ISCSI=m CONFIG_SCSI_BNX2X_FCOE=m CONFIG_BE2ISCSI=m # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_HPSA is not set CONFIG_SCSI_3W_9XXX=m # CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set CONFIG_SCSI_AACRAID=m # CONFIG_SCSI_AIC7XXX is not set CONFIG_SCSI_AIC79XX=m CONFIG_AIC79XX_CMDS_PER_DEVICE=32 CONFIG_AIC79XX_RESET_DELAY_MS=5000 CONFIG_AIC79XX_DEBUG_ENABLE=y CONFIG_AIC79XX_DEBUG_MASK=0 CONFIG_AIC79XX_REG_PRETTY_PRINT=y CONFIG_SCSI_AIC94XX=y # CONFIG_AIC94XX_DEBUG is not set CONFIG_SCSI_MVSAS=y CONFIG_SCSI_MVSAS_DEBUG=y # CONFIG_SCSI_MVSAS_TASKLET is not set # CONFIG_SCSI_MVUMI is not set CONFIG_SCSI_DPT_I2O=y CONFIG_SCSI_ADVANSYS=y CONFIG_SCSI_ARCMSR=y # CONFIG_SCSI_ESAS2R is not set CONFIG_MEGARAID_NEWGEN=y CONFIG_MEGARAID_MM=y # CONFIG_MEGARAID_MAILBOX is not set CONFIG_MEGARAID_LEGACY=m CONFIG_MEGARAID_SAS=m # CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_MPT3SAS is not set # CONFIG_SCSI_UFSHCD is not set CONFIG_SCSI_HPTIOP=m CONFIG_SCSI_BUSLOGIC=y # CONFIG_SCSI_FLASHPOINT is not set CONFIG_VMWARE_PVSCSI=m CONFIG_LIBFC=y CONFIG_LIBFCOE=y CONFIG_FCOE=y CONFIG_FCOE_FNIC=m # CONFIG_SCSI_DMX3191D is not set CONFIG_SCSI_EATA=m # CONFIG_SCSI_EATA_TAGGED_QUEUE is not set CONFIG_SCSI_EATA_LINKED_COMMANDS=y CONFIG_SCSI_EATA_MAX_TAGS=16 # CONFIG_SCSI_FUTURE_DOMAIN is not set CONFIG_SCSI_GDTH=y # CONFIG_SCSI_ISCI is not set CONFIG_SCSI_IPS=y # CONFIG_SCSI_INITIO is not set CONFIG_SCSI_INIA100=m # CONFIG_SCSI_STEX is not set CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_SYM53C8XX_MMIO is not set # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA_FC=y CONFIG_TCM_QLA2XXX=y CONFIG_SCSI_QLA_ISCSI=m # CONFIG_SCSI_LPFC is not set CONFIG_SCSI_DC395x=m CONFIG_SCSI_DC390T=y # CONFIG_SCSI_DEBUG is not set CONFIG_SCSI_PMCRAID=y CONFIG_SCSI_PM8001=m # CONFIG_SCSI_SRP is not set CONFIG_SCSI_BFA_FC=y # CONFIG_SCSI_VIRTIO is not set CONFIG_SCSI_CHELSIO_FCOE=y CONFIG_SCSI_LOWLEVEL_PCMCIA=y CONFIG_PCMCIA_AHA152X=m CONFIG_PCMCIA_FDOMAIN=m CONFIG_PCMCIA_QLOGIC=m CONFIG_PCMCIA_SYM53C500=m CONFIG_SCSI_DH=y # CONFIG_SCSI_DH_RDAC is not set # CONFIG_SCSI_DH_HP_SW is not set # CONFIG_SCSI_DH_EMC is not set CONFIG_SCSI_DH_ALUA=m # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # # Controllers with non-SFF native interface # CONFIG_SATA_AHCI=y CONFIG_SATA_AHCI_PLATFORM=y CONFIG_SATA_INIC162X=y CONFIG_SATA_ACARD_AHCI=y CONFIG_SATA_SIL24=y CONFIG_ATA_SFF=y # # SFF controllers with custom DMA interface # # CONFIG_PDC_ADMA is not set CONFIG_SATA_QSTOR=y # CONFIG_SATA_SX4 is not set CONFIG_ATA_BMDMA=y # # SATA SFF controllers with BMDMA # CONFIG_ATA_PIIX=y CONFIG_SATA_MV=m CONFIG_SATA_NV=y CONFIG_SATA_PROMISE=y # CONFIG_SATA_SIL is not set # CONFIG_SATA_SIS is not set CONFIG_SATA_SVW=y CONFIG_SATA_ULI=m # CONFIG_SATA_VIA is not set CONFIG_SATA_VITESSE=m # # PATA SFF controllers with BMDMA # CONFIG_PATA_ALI=m CONFIG_PATA_AMD=y # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set CONFIG_PATA_ATP867X=y CONFIG_PATA_CMD64X=y CONFIG_PATA_CYPRESS=y # CONFIG_PATA_EFAR is not set CONFIG_PATA_HPT366=m CONFIG_PATA_HPT37X=y # CONFIG_PATA_HPT3X2N is not set CONFIG_PATA_HPT3X3=m # CONFIG_PATA_HPT3X3_DMA is not set CONFIG_PATA_IT8213=y CONFIG_PATA_IT821X=y # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_MARVELL is not set CONFIG_PATA_NETCELL=m CONFIG_PATA_NINJA32=m # CONFIG_PATA_NS87415 is not set CONFIG_PATA_OLDPIIX=y CONFIG_PATA_OPTIDMA=m CONFIG_PATA_PDC2027X=y CONFIG_PATA_PDC_OLD=y # CONFIG_PATA_RADISYS is not set CONFIG_PATA_RDC=y CONFIG_PATA_SCH=y CONFIG_PATA_SERVERWORKS=y CONFIG_PATA_SIL680=y # CONFIG_PATA_SIS is not set CONFIG_PATA_TOSHIBA=y CONFIG_PATA_TRIFLEX=y CONFIG_PATA_VIA=y CONFIG_PATA_WINBOND=y # # PIO-only SFF controllers # # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_MPIIX is not set CONFIG_PATA_NS87410=m CONFIG_PATA_OPTI=y CONFIG_PATA_PCMCIA=m CONFIG_PATA_PLATFORM=y # CONFIG_PATA_RZ1000 is not set # # Generic fallback / legacy drivers # # CONFIG_ATA_GENERIC is not set # CONFIG_PATA_LEGACY is not set # CONFIG_MD is not set CONFIG_TARGET_CORE=y CONFIG_TCM_IBLOCK=y # CONFIG_TCM_FILEIO is not set # CONFIG_TCM_PSCSI is not set CONFIG_LOOPBACK_TARGET=y CONFIG_TCM_FC=y CONFIG_ISCSI_TARGET=y # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # CONFIG_FIREWIRE is not set # CONFIG_FIREWIRE_NOSY is not set CONFIG_I2O=m # CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set CONFIG_I2O_EXT_ADAPTEC=y CONFIG_I2O_EXT_ADAPTEC_DMA64=y CONFIG_I2O_CONFIG=m # CONFIG_I2O_CONFIG_OLD_IOCTL is not set # CONFIG_I2O_BUS is not set CONFIG_I2O_BLOCK=m CONFIG_I2O_SCSI=m CONFIG_I2O_PROC=m CONFIG_MACINTOSH_DRIVERS=y CONFIG_NETDEVICES=y CONFIG_MII=y CONFIG_NET_CORE=y CONFIG_BONDING=m # CONFIG_DUMMY is not set CONFIG_EQUALIZER=m CONFIG_NET_FC=y CONFIG_NET_TEAM=y CONFIG_NET_TEAM_MODE_BROADCAST=m # CONFIG_NET_TEAM_MODE_ROUNDROBIN is not set CONFIG_NET_TEAM_MODE_RANDOM=m CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m CONFIG_NET_TEAM_MODE_LOADBALANCE=y CONFIG_MACVLAN=m # CONFIG_MACVTAP is not set CONFIG_VXLAN=y CONFIG_NETCONSOLE=y CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_NETPOLL=y CONFIG_NET_POLL_CONTROLLER=y # CONFIG_TUN is not set # CONFIG_VETH is not set CONFIG_VIRTIO_NET=y CONFIG_NLMON=y CONFIG_SUNGEM_PHY=y # CONFIG_ARCNET is not set # # CAIF transport drivers # CONFIG_CAIF_TTY=y # CONFIG_CAIF_SPI_SLAVE is not set CONFIG_CAIF_HSI=m CONFIG_CAIF_VIRTIO=y CONFIG_VHOST_NET=y CONFIG_VHOST_SCSI=m CONFIG_VHOST_RING=y CONFIG_VHOST=y # # Distributed Switch Architecture drivers # CONFIG_NET_DSA_MV88E6XXX=y CONFIG_NET_DSA_MV88E6060=y CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y CONFIG_NET_DSA_MV88E6131=y # CONFIG_NET_DSA_MV88E6123_61_65 is not set CONFIG_ETHERNET=y CONFIG_MDIO=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_ADAPTEC is not set # CONFIG_NET_VENDOR_ALTEON is not set CONFIG_ALTERA_TSE=y # CONFIG_NET_VENDOR_AMD is not set # CONFIG_NET_VENDOR_ARC is not set # CONFIG_NET_VENDOR_ATHEROS is not set CONFIG_NET_VENDOR_BROADCOM=y # CONFIG_B44 is not set CONFIG_BNX2=y CONFIG_CNIC=y CONFIG_TIGON3=y CONFIG_BNX2X=y # CONFIG_BNX2X_SRIOV is not set # CONFIG_NET_VENDOR_BROCADE is not set CONFIG_NET_CALXEDA_XGMAC=y CONFIG_NET_VENDOR_CHELSIO=y CONFIG_CHELSIO_T1=y CONFIG_CHELSIO_T1_1G=y CONFIG_CHELSIO_T3=m CONFIG_CHELSIO_T4=m CONFIG_CHELSIO_T4VF=y CONFIG_NET_VENDOR_CISCO=y CONFIG_ENIC=m # CONFIG_DNET is not set # CONFIG_NET_VENDOR_DEC is not set CONFIG_NET_VENDOR_DLINK=y CONFIG_DL2K=m # CONFIG_SUNDANCE is not set # CONFIG_NET_VENDOR_EMULEX is not set CONFIG_NET_VENDOR_EXAR=y # CONFIG_S2IO is not set CONFIG_VXGE=m CONFIG_VXGE_DEBUG_TRACE_ALL=y # CONFIG_NET_VENDOR_FUJITSU is not set # CONFIG_NET_VENDOR_HP is not set CONFIG_NET_VENDOR_INTEL=y CONFIG_E100=y # CONFIG_E1000 is not set CONFIG_E1000E=y # CONFIG_IGB is not set CONFIG_IGBVF=y # CONFIG_IXGB is not set CONFIG_IXGBE=y CONFIG_IXGBE_HWMON=y # CONFIG_IXGBEVF is not set CONFIG_I40E=y CONFIG_I40E_VXLAN=y # CONFIG_I40EVF is not set # CONFIG_NET_VENDOR_I825XX is not set CONFIG_IP1000=y CONFIG_JME=y # CONFIG_NET_VENDOR_MARVELL is not set CONFIG_NET_VENDOR_MELLANOX=y CONFIG_MLX4_EN=y # CONFIG_MLX4_EN_VXLAN is not set CONFIG_MLX4_CORE=y CONFIG_MLX4_DEBUG=y # CONFIG_MLX5_CORE is not set # CONFIG_NET_VENDOR_MICREL is not set CONFIG_NET_VENDOR_MYRI=y # CONFIG_MYRI10GE is not set CONFIG_FEALNX=y # CONFIG_NET_VENDOR_NATSEMI is not set CONFIG_NET_VENDOR_NVIDIA=y CONFIG_FORCEDETH=y CONFIG_NET_VENDOR_OKI=y # CONFIG_PCH_GBE is not set CONFIG_ETHOC=y # CONFIG_NET_PACKET_ENGINE is not set CONFIG_NET_VENDOR_QLOGIC=y CONFIG_QLA3XXX=m # CONFIG_QLCNIC is not set # CONFIG_QLGE is not set CONFIG_NETXEN_NIC=m CONFIG_NET_VENDOR_REALTEK=y # CONFIG_ATP is not set CONFIG_8139CP=y CONFIG_8139TOO=y # CONFIG_8139TOO_PIO is not set CONFIG_8139TOO_TUNE_TWISTER=y # CONFIG_8139TOO_8129 is not set CONFIG_8139_OLD_RX_RESET=y CONFIG_R8169=y CONFIG_SH_ETH=y # CONFIG_NET_VENDOR_RDC is not set CONFIG_NET_VENDOR_SAMSUNG=y CONFIG_SXGBE_ETH=m CONFIG_NET_VENDOR_SEEQ=y CONFIG_NET_VENDOR_SILAN=y CONFIG_SC92031=m # CONFIG_NET_VENDOR_SIS is not set CONFIG_SFC=m # CONFIG_SFC_MCDI_MON is not set # CONFIG_SFC_SRIOV is not set CONFIG_NET_VENDOR_SMSC=y # CONFIG_PCMCIA_SMC91C92 is not set CONFIG_EPIC100=m CONFIG_SMSC911X=y # CONFIG_SMSC911X_ARCH_HOOKS is not set CONFIG_SMSC9420=m CONFIG_NET_VENDOR_STMICRO=y CONFIG_STMMAC_ETH=y CONFIG_STMMAC_PLATFORM=y CONFIG_STMMAC_PCI=y CONFIG_STMMAC_DEBUG_FS=y # CONFIG_STMMAC_DA is not set CONFIG_NET_VENDOR_SUN=y CONFIG_HAPPYMEAL=m CONFIG_SUNGEM=y # CONFIG_CASSINI is not set CONFIG_NIU=y # CONFIG_NET_VENDOR_TEHUTI is not set CONFIG_NET_VENDOR_TI=y CONFIG_TLAN=y CONFIG_NET_VENDOR_VIA=y CONFIG_VIA_RHINE=m # CONFIG_VIA_RHINE_MMIO is not set CONFIG_VIA_VELOCITY=y CONFIG_NET_VENDOR_WIZNET=y # CONFIG_WIZNET_W5100 is not set CONFIG_WIZNET_W5300=y # CONFIG_WIZNET_BUS_DIRECT is not set # CONFIG_WIZNET_BUS_INDIRECT is not set CONFIG_WIZNET_BUS_ANY=y # CONFIG_NET_VENDOR_XIRCOM is not set CONFIG_FDDI=m CONFIG_DEFXX=m CONFIG_DEFXX_MMIO=y CONFIG_SKFP=m CONFIG_HIPPI=y # CONFIG_ROADRUNNER is not set CONFIG_PHYLIB=y # # MII PHY device drivers # # CONFIG_AT803X_PHY is not set CONFIG_AMD_PHY=m CONFIG_MARVELL_PHY=m # CONFIG_DAVICOM_PHY is not set CONFIG_QSEMI_PHY=y # CONFIG_LXT_PHY is not set CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=y CONFIG_SMSC_PHY=y CONFIG_BROADCOM_PHY=y CONFIG_BCM7XXX_PHY=y CONFIG_BCM87XX_PHY=y CONFIG_ICPLUS_PHY=y CONFIG_REALTEK_PHY=y CONFIG_NATIONAL_PHY=y CONFIG_STE10XP=m # CONFIG_LSI_ET1011C_PHY is not set CONFIG_MICREL_PHY=m CONFIG_FIXED_PHY=y CONFIG_MDIO_BITBANG=y CONFIG_MDIO_GPIO=y # CONFIG_PLIP is not set CONFIG_PPP=m # CONFIG_PPP_BSDCOMP is not set CONFIG_PPP_DEFLATE=m CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m # CONFIG_PPP_MULTILINK is not set CONFIG_PPPOE=m CONFIG_PPTP=m CONFIG_PPPOL2TP=m CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLHC=m CONFIG_SLIP_COMPRESSED=y # CONFIG_SLIP_SMART is not set CONFIG_SLIP_MODE_SLIP6=y # # USB Network Adapters # CONFIG_USB_CATC=m CONFIG_USB_KAWETH=y CONFIG_USB_PEGASUS=m CONFIG_USB_RTL8150=y # CONFIG_USB_RTL8152 is not set CONFIG_USB_USBNET=y # CONFIG_USB_NET_AX8817X is not set CONFIG_USB_NET_AX88179_178A=m CONFIG_USB_NET_CDCETHER=y CONFIG_USB_NET_CDC_EEM=m CONFIG_USB_NET_CDC_NCM=y # CONFIG_USB_NET_HUAWEI_CDC_NCM is not set CONFIG_USB_NET_CDC_MBIM=y CONFIG_USB_NET_DM9601=m CONFIG_USB_NET_SR9700=y CONFIG_USB_NET_SR9800=m CONFIG_USB_NET_SMSC75XX=y CONFIG_USB_NET_SMSC95XX=m CONFIG_USB_NET_GL620A=m # CONFIG_USB_NET_NET1080 is not set CONFIG_USB_NET_PLUSB=m CONFIG_USB_NET_MCS7830=m CONFIG_USB_NET_RNDIS_HOST=y CONFIG_USB_NET_CDC_SUBSET=y CONFIG_USB_ALI_M5632=y # CONFIG_USB_AN2720 is not set # CONFIG_USB_BELKIN is not set # CONFIG_USB_ARMLINUX is not set CONFIG_USB_EPSON2888=y CONFIG_USB_KC2190=y CONFIG_USB_NET_ZAURUS=y CONFIG_USB_NET_CX82310_ETH=y CONFIG_USB_NET_KALMIA=y CONFIG_USB_NET_QMI_WWAN=y CONFIG_USB_NET_INT51X1=m # CONFIG_USB_CDC_PHONET is not set CONFIG_USB_IPHETH=y CONFIG_USB_SIERRA_NET=m # CONFIG_USB_VL600 is not set CONFIG_WLAN=y # CONFIG_PCMCIA_RAYCS is not set CONFIG_LIBERTAS_THINFIRM=m # CONFIG_LIBERTAS_THINFIRM_DEBUG is not set # CONFIG_LIBERTAS_THINFIRM_USB is not set CONFIG_AIRO=m CONFIG_ATMEL=m CONFIG_PCI_ATMEL=m CONFIG_PCMCIA_ATMEL=m # CONFIG_AT76C50X_USB is not set # CONFIG_AIRO_CS is not set CONFIG_PCMCIA_WL3501=m CONFIG_PRISM54=m CONFIG_USB_ZD1201=m # CONFIG_USB_NET_RNDIS_WLAN is not set # CONFIG_RTL8180 is not set CONFIG_RTL8187=m CONFIG_RTL8187_LEDS=y CONFIG_ADM8211=m # CONFIG_MAC80211_HWSIM is not set CONFIG_MWL8K=m # CONFIG_ATH_CARDS is not set CONFIG_B43=m CONFIG_B43_SSB=y CONFIG_B43_PCI_AUTOSELECT=y CONFIG_B43_PCICORE_AUTOSELECT=y # CONFIG_B43_PCMCIA is not set CONFIG_B43_SDIO=y CONFIG_B43_PIO=y # CONFIG_B43_PHY_N is not set # CONFIG_B43_PHY_LP is not set CONFIG_B43_LEDS=y CONFIG_B43_HWRNG=y CONFIG_B43_DEBUG=y CONFIG_B43LEGACY=m CONFIG_B43LEGACY_PCI_AUTOSELECT=y CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y CONFIG_B43LEGACY_LEDS=y CONFIG_B43LEGACY_HWRNG=y CONFIG_B43LEGACY_DEBUG=y CONFIG_B43LEGACY_DMA=y # CONFIG_B43LEGACY_DMA_AND_PIO_MODE is not set CONFIG_B43LEGACY_DMA_MODE=y # CONFIG_B43LEGACY_PIO_MODE is not set CONFIG_BRCMUTIL=m # CONFIG_BRCMSMAC is not set CONFIG_BRCMFMAC=m # CONFIG_BRCMFMAC_SDIO is not set # CONFIG_BRCMFMAC_USB is not set # CONFIG_BRCM_TRACING is not set # CONFIG_BRCMDBG is not set CONFIG_HOSTAP=m CONFIG_HOSTAP_FIRMWARE=y CONFIG_HOSTAP_FIRMWARE_NVRAM=y CONFIG_HOSTAP_PLX=m # CONFIG_HOSTAP_PCI is not set CONFIG_HOSTAP_CS=m CONFIG_IPW2100=m CONFIG_IPW2100_MONITOR=y CONFIG_IPW2100_DEBUG=y CONFIG_LIBIPW=m CONFIG_LIBIPW_DEBUG=y CONFIG_IWLWIFI=m # CONFIG_IWLDVM is not set CONFIG_IWLMVM=m CONFIG_IWLWIFI_OPMODE_MODULAR=y CONFIG_IWLWIFI_BCAST_FILTERING=y # # Debugging Options # CONFIG_IWLWIFI_DEBUG=y CONFIG_IWLWIFI_DEBUGFS=y # CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE is not set CONFIG_IWLEGACY=m CONFIG_IWL4965=m # CONFIG_IWL3945 is not set # # iwl3945 / iwl4965 Debugging Options # # CONFIG_IWLEGACY_DEBUG is not set CONFIG_IWLEGACY_DEBUGFS=y # CONFIG_LIBERTAS is not set CONFIG_P54_COMMON=m # CONFIG_P54_USB is not set CONFIG_P54_PCI=m CONFIG_P54_LEDS=y # CONFIG_RT2X00 is not set # CONFIG_RTL_CARDS is not set # CONFIG_WL_TI is not set CONFIG_ZD1211RW=m CONFIG_ZD1211RW_DEBUG=y CONFIG_MWIFIEX=m CONFIG_MWIFIEX_SDIO=m CONFIG_MWIFIEX_PCIE=m CONFIG_MWIFIEX_USB=m # CONFIG_CW1200 is not set CONFIG_RSI_91X=m # CONFIG_RSI_DEBUGFS is not set CONFIG_RSI_SDIO=m CONFIG_RSI_USB=m # # WiMAX Wireless Broadband devices # CONFIG_WIMAX_I2400M=m CONFIG_WIMAX_I2400M_USB=m CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8 CONFIG_WAN=y CONFIG_LANMEDIA=m CONFIG_HDLC=m # CONFIG_HDLC_RAW is not set CONFIG_HDLC_RAW_ETH=m CONFIG_HDLC_CISCO=m CONFIG_HDLC_FR=m CONFIG_HDLC_PPP=m # CONFIG_HDLC_X25 is not set CONFIG_PCI200SYN=m # CONFIG_WANXL is not set CONFIG_PC300TOO=m # CONFIG_FARSYNC is not set CONFIG_DSCC4=m CONFIG_DSCC4_PCISYNC=y CONFIG_DSCC4_PCI_RST=y CONFIG_DLCI=m CONFIG_DLCI_MAX=8 CONFIG_SBNI=m CONFIG_SBNI_MULTILINE=y CONFIG_IEEE802154_DRIVERS=m # CONFIG_IEEE802154_FAKEHARD is not set # CONFIG_IEEE802154_FAKELB is not set CONFIG_VMXNET3=m # CONFIG_ISDN is not set # # Input device support # CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=y CONFIG_INPUT_POLLDEV=y CONFIG_INPUT_SPARSEKMAP=m CONFIG_INPUT_MATRIXKMAP=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_JOYDEV=y CONFIG_INPUT_EVDEV=y CONFIG_INPUT_EVBUG=y # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ADP5588=y CONFIG_KEYBOARD_ADP5589=m CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_QT1070 is not set CONFIG_KEYBOARD_QT2160=y # CONFIG_KEYBOARD_LKKBD is not set CONFIG_KEYBOARD_GPIO=m CONFIG_KEYBOARD_GPIO_POLLED=m CONFIG_KEYBOARD_TCA6416=y # CONFIG_KEYBOARD_TCA8418 is not set CONFIG_KEYBOARD_MATRIX=m CONFIG_KEYBOARD_LM8323=y CONFIG_KEYBOARD_LM8333=y # CONFIG_KEYBOARD_MAX7359 is not set CONFIG_KEYBOARD_MCS=m CONFIG_KEYBOARD_MPR121=y CONFIG_KEYBOARD_NEWTON=y CONFIG_KEYBOARD_OPENCORES=y CONFIG_KEYBOARD_STOWAWAY=y CONFIG_KEYBOARD_SUNKBD=m CONFIG_KEYBOARD_TC3589X=y CONFIG_KEYBOARD_TWL4030=m CONFIG_KEYBOARD_XTKBD=y CONFIG_KEYBOARD_CROS_EC=m # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_JOYSTICK=y CONFIG_JOYSTICK_ANALOG=y CONFIG_JOYSTICK_A3D=m CONFIG_JOYSTICK_ADI=y # CONFIG_JOYSTICK_COBRA is not set CONFIG_JOYSTICK_GF2K=m CONFIG_JOYSTICK_GRIP=m # CONFIG_JOYSTICK_GRIP_MP is not set # CONFIG_JOYSTICK_GUILLEMOT is not set CONFIG_JOYSTICK_INTERACT=y CONFIG_JOYSTICK_SIDEWINDER=y CONFIG_JOYSTICK_TMDC=y CONFIG_JOYSTICK_IFORCE=m # CONFIG_JOYSTICK_IFORCE_USB is not set # CONFIG_JOYSTICK_IFORCE_232 is not set # CONFIG_JOYSTICK_WARRIOR is not set CONFIG_JOYSTICK_MAGELLAN=y CONFIG_JOYSTICK_SPACEORB=y CONFIG_JOYSTICK_SPACEBALL=y CONFIG_JOYSTICK_STINGER=m CONFIG_JOYSTICK_TWIDJOY=m CONFIG_JOYSTICK_ZHENHUA=m CONFIG_JOYSTICK_DB9=m CONFIG_JOYSTICK_GAMECON=m CONFIG_JOYSTICK_TURBOGRAFX=m CONFIG_JOYSTICK_AS5011=m # CONFIG_JOYSTICK_JOYDUMP is not set # CONFIG_JOYSTICK_XPAD is not set CONFIG_JOYSTICK_WALKERA0701=m CONFIG_INPUT_TABLET=y CONFIG_TABLET_USB_ACECAD=m CONFIG_TABLET_USB_AIPTEK=y # CONFIG_TABLET_USB_GTCO is not set # CONFIG_TABLET_USB_HANWANG is not set # CONFIG_TABLET_USB_KBTAB is not set # CONFIG_TABLET_USB_WACOM is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_88PM860X=m CONFIG_TOUCHSCREEN_AD7879=m CONFIG_TOUCHSCREEN_AD7879_I2C=m CONFIG_TOUCHSCREEN_ATMEL_MXT=y # CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set # CONFIG_TOUCHSCREEN_BU21013 is not set CONFIG_TOUCHSCREEN_CY8CTMG110=y CONFIG_TOUCHSCREEN_CYTTSP_CORE=m CONFIG_TOUCHSCREEN_CYTTSP_I2C=m # CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set CONFIG_TOUCHSCREEN_DYNAPRO=m # CONFIG_TOUCHSCREEN_HAMPSHIRE is not set # CONFIG_TOUCHSCREEN_EETI is not set CONFIG_TOUCHSCREEN_FUJITSU=m CONFIG_TOUCHSCREEN_ILI210X=y CONFIG_TOUCHSCREEN_GUNZE=m CONFIG_TOUCHSCREEN_ELO=y # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set CONFIG_TOUCHSCREEN_WACOM_I2C=m CONFIG_TOUCHSCREEN_MAX11801=y # CONFIG_TOUCHSCREEN_MCS5000 is not set CONFIG_TOUCHSCREEN_MMS114=m CONFIG_TOUCHSCREEN_MTOUCH=m CONFIG_TOUCHSCREEN_INEXIO=m CONFIG_TOUCHSCREEN_MK712=m CONFIG_TOUCHSCREEN_PENMOUNT=y CONFIG_TOUCHSCREEN_EDT_FT5X06=m # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set CONFIG_TOUCHSCREEN_TI_AM335X_TSC=m CONFIG_TOUCHSCREEN_PIXCIR=y # CONFIG_TOUCHSCREEN_WM831X is not set CONFIG_TOUCHSCREEN_USB_COMPOSITE=y # CONFIG_TOUCHSCREEN_MC13783 is not set # CONFIG_TOUCHSCREEN_USB_EGALAX is not set CONFIG_TOUCHSCREEN_USB_PANJIT=y # CONFIG_TOUCHSCREEN_USB_3M is not set CONFIG_TOUCHSCREEN_USB_ITM=y CONFIG_TOUCHSCREEN_USB_ETURBO=y # CONFIG_TOUCHSCREEN_USB_GUNZE is not set # CONFIG_TOUCHSCREEN_USB_DMC_TSC10 is not set CONFIG_TOUCHSCREEN_USB_IRTOUCH=y CONFIG_TOUCHSCREEN_USB_IDEALTEK=y # CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH is not set CONFIG_TOUCHSCREEN_USB_GOTOP=y # CONFIG_TOUCHSCREEN_USB_JASTEC is not set CONFIG_TOUCHSCREEN_USB_ELO=y # CONFIG_TOUCHSCREEN_USB_E2I is not set CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y # CONFIG_TOUCHSCREEN_USB_ETT_TC45USB is not set # CONFIG_TOUCHSCREEN_USB_NEXIO is not set # CONFIG_TOUCHSCREEN_USB_EASYTOUCH is not set CONFIG_TOUCHSCREEN_TOUCHIT213=y CONFIG_TOUCHSCREEN_TSC_SERIO=y # CONFIG_TOUCHSCREEN_TSC2007 is not set CONFIG_TOUCHSCREEN_ST1232=m CONFIG_TOUCHSCREEN_SUR40=y # CONFIG_TOUCHSCREEN_TPS6507X is not set CONFIG_TOUCHSCREEN_ZFORCE=m CONFIG_INPUT_MISC=y CONFIG_INPUT_88PM860X_ONKEY=y CONFIG_INPUT_88PM80X_ONKEY=m # CONFIG_INPUT_AD714X is not set # CONFIG_INPUT_BMA150 is not set # CONFIG_INPUT_PCSPKR is not set # CONFIG_INPUT_MC13783_PWRBUTTON is not set CONFIG_INPUT_MMA8450=m # CONFIG_INPUT_MPU3050 is not set # CONFIG_INPUT_APANEL is not set # CONFIG_INPUT_GP2A is not set CONFIG_INPUT_GPIO_TILT_POLLED=m CONFIG_INPUT_ATI_REMOTE2=y # CONFIG_INPUT_KEYSPAN_REMOTE is not set CONFIG_INPUT_KXTJ9=y CONFIG_INPUT_KXTJ9_POLLED_MODE=y # CONFIG_INPUT_POWERMATE is not set CONFIG_INPUT_YEALINK=m CONFIG_INPUT_CM109=y CONFIG_INPUT_RETU_PWRBUTTON=m # CONFIG_INPUT_TWL4030_PWRBUTTON is not set CONFIG_INPUT_TWL4030_VIBRA=y CONFIG_INPUT_UINPUT=m # CONFIG_INPUT_PCF50633_PMU is not set CONFIG_INPUT_PCF8574=y CONFIG_INPUT_PWM_BEEPER=y CONFIG_INPUT_GPIO_ROTARY_ENCODER=m # CONFIG_INPUT_WM831X_ON is not set CONFIG_INPUT_ADXL34X=y CONFIG_INPUT_ADXL34X_I2C=y CONFIG_INPUT_IMS_PCU=y # CONFIG_INPUT_CMA3000 is not set # CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set CONFIG_INPUT_SOC_BUTTON_ARRAY=m # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=y CONFIG_SERIO_CT82C710=y # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_SERIO_ALTERA_PS2 is not set CONFIG_SERIO_PS2MULT=y # CONFIG_SERIO_ARC_PS2 is not set CONFIG_GAMEPORT=y CONFIG_GAMEPORT_NS558=m CONFIG_GAMEPORT_L4=y # CONFIG_GAMEPORT_EMU10K1 is not set # CONFIG_GAMEPORT_FM801 is not set # # Character devices # CONFIG_TTY=y CONFIG_VT=y # CONFIG_CONSOLE_TRANSLATIONS is not set CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_UNIX98_PTYS=y CONFIG_DEVPTS_MULTIPLE_INSTANCES=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_SERIAL_NONSTANDARD is not set CONFIG_NOZOMI=m CONFIG_N_GSM=m CONFIG_TRACE_ROUTER=m CONFIG_TRACE_SINK=y CONFIG_DEVKMEM=y # # Serial drivers # CONFIG_SERIAL_8250=y # CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set CONFIG_SERIAL_8250_CONSOLE=y CONFIG_FIX_EARLYCON_MEM=y # CONFIG_SERIAL_8250_PCI is not set CONFIG_SERIAL_8250_CS=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y # CONFIG_SERIAL_8250_MANY_PORTS is not set # CONFIG_SERIAL_8250_SHARE_IRQ is not set # CONFIG_SERIAL_8250_DETECT_IRQ is not set CONFIG_SERIAL_8250_RSA=y CONFIG_SERIAL_8250_DW=y # # Non-8250 serial port support # # CONFIG_SERIAL_KGDB_NMI is not set CONFIG_SERIAL_MFD_HSU=m CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_CONSOLE_POLL=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_SCCNXP=m CONFIG_SERIAL_ALTERA_JTAGUART=m CONFIG_SERIAL_ALTERA_UART=m CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4 CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200 # CONFIG_SERIAL_PCH_UART is not set CONFIG_SERIAL_ARC=m CONFIG_SERIAL_ARC_NR_PORTS=1 CONFIG_SERIAL_RP2=y CONFIG_SERIAL_RP2_NR_UARTS=32 CONFIG_SERIAL_FSL_LPUART=y # CONFIG_SERIAL_FSL_LPUART_CONSOLE is not set # CONFIG_TTY_PRINTK is not set CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set CONFIG_PPDEV=m CONFIG_HVC_DRIVER=y CONFIG_VIRTIO_CONSOLE=y # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m CONFIG_HW_RANDOM_TIMERIOMEM=m # CONFIG_HW_RANDOM_INTEL is not set # CONFIG_HW_RANDOM_AMD is not set CONFIG_HW_RANDOM_VIA=m # CONFIG_HW_RANDOM_VIRTIO is not set CONFIG_HW_RANDOM_TPM=m CONFIG_NVRAM=m # CONFIG_R3964 is not set CONFIG_APPLICOM=m # # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set CONFIG_CARDMAN_4040=y # CONFIG_IPWIRELESS is not set CONFIG_MWAVE=y # CONFIG_RAW_DRIVER is not set CONFIG_HANGCHECK_TIMER=m CONFIG_TCG_TPM=y CONFIG_TCG_TIS=y CONFIG_TCG_TIS_I2C_ATMEL=m # CONFIG_TCG_TIS_I2C_INFINEON is not set CONFIG_TCG_TIS_I2C_NUVOTON=y CONFIG_TCG_NSC=y CONFIG_TCG_ATMEL=y # CONFIG_TCG_ST33_I2C is not set # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_COMPAT is not set CONFIG_I2C_CHARDEV=y CONFIG_I2C_MUX=y # # Multiplexer I2C Chip support # CONFIG_I2C_MUX_GPIO=y CONFIG_I2C_MUX_PCA9541=y CONFIG_I2C_MUX_PCA954x=y CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=y CONFIG_I2C_ALGOPCA=m # # I2C Hardware Bus support # # # PC SMBus host controller drivers # # CONFIG_I2C_ALI1535 is not set CONFIG_I2C_ALI1563=y CONFIG_I2C_ALI15X3=m # CONFIG_I2C_AMD756 is not set CONFIG_I2C_AMD8111=m CONFIG_I2C_I801=y CONFIG_I2C_ISCH=y # CONFIG_I2C_ISMT is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set CONFIG_I2C_SIS5595=m CONFIG_I2C_SIS630=y CONFIG_I2C_SIS96X=m CONFIG_I2C_VIA=y CONFIG_I2C_VIAPRO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_CBUS_GPIO is not set CONFIG_I2C_DESIGNWARE_CORE=y CONFIG_I2C_DESIGNWARE_PLATFORM=m CONFIG_I2C_DESIGNWARE_PCI=y # CONFIG_I2C_EG20T is not set # CONFIG_I2C_GPIO is not set CONFIG_I2C_KEMPLD=m # CONFIG_I2C_OCORES is not set CONFIG_I2C_PCA_PLATFORM=m # CONFIG_I2C_PXA_PCI is not set CONFIG_I2C_SIMTEC=m # CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers # CONFIG_I2C_DIOLAN_U2C=m # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_ROBOTFUZZ_OSIF is not set CONFIG_I2C_TAOS_EVM=y # CONFIG_I2C_TINY_USB is not set # # Other I2C/SMBus bus drivers # CONFIG_I2C_STUB=m CONFIG_I2C_DEBUG_CORE=y CONFIG_I2C_DEBUG_ALGO=y CONFIG_I2C_DEBUG_BUS=y # CONFIG_SPI is not set CONFIG_SPMI=y CONFIG_HSI=y CONFIG_HSI_BOARDINFO=y # # HSI clients # CONFIG_HSI_CHAR=m # # PPS support # CONFIG_PPS=y # CONFIG_PPS_DEBUG is not set # # PPS clients support # CONFIG_PPS_CLIENT_KTIMER=m CONFIG_PPS_CLIENT_LDISC=m CONFIG_PPS_CLIENT_PARPORT=m CONFIG_PPS_CLIENT_GPIO=m # # PPS generators support # # # PTP clock support # CONFIG_PTP_1588_CLOCK=y CONFIG_DP83640_PHY=y CONFIG_PTP_1588_CLOCK_PCH=m CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y CONFIG_GPIO_DEVRES=y CONFIG_DEBUG_GPIO=y # CONFIG_GPIO_SYSFS is not set CONFIG_GPIO_GENERIC=y # # Memory mapped GPIO drivers: # CONFIG_GPIO_GENERIC_PLATFORM=y CONFIG_GPIO_IT8761E=y CONFIG_GPIO_F7188X=m CONFIG_GPIO_SCH311X=y CONFIG_GPIO_SCH=y # CONFIG_GPIO_ICH is not set # CONFIG_GPIO_VX855 is not set # # I2C GPIO expanders: # # CONFIG_GPIO_MAX7300 is not set CONFIG_GPIO_MAX732X=m CONFIG_GPIO_PCA953X=y # CONFIG_GPIO_PCA953X_IRQ is not set CONFIG_GPIO_PCF857X=y # CONFIG_GPIO_SX150X is not set # CONFIG_GPIO_TC3589X is not set CONFIG_GPIO_TWL4030=y CONFIG_GPIO_WM831X=y CONFIG_GPIO_ADP5588=y CONFIG_GPIO_ADP5588_IRQ=y # # PCI GPIO expanders: # # CONFIG_GPIO_CS5535 is not set CONFIG_GPIO_BT8XX=m # CONFIG_GPIO_AMD8111 is not set # CONFIG_GPIO_INTEL_MID is not set CONFIG_GPIO_PCH=y # CONFIG_GPIO_ML_IOH is not set CONFIG_GPIO_RDC321X=m # # SPI GPIO expanders: # # # AC97 GPIO expanders: # # # LPC GPIO expanders: # CONFIG_GPIO_KEMPLD=m # # MODULbus GPIO expanders: # CONFIG_GPIO_JANZ_TTL=y # CONFIG_GPIO_TPS65910 is not set # # USB GPIO expanders: # CONFIG_W1=m CONFIG_W1_CON=y # # 1-wire Bus Masters # # CONFIG_W1_MASTER_MATROX is not set CONFIG_W1_MASTER_DS2490=m CONFIG_W1_MASTER_DS2482=m # CONFIG_W1_MASTER_DS1WM is not set CONFIG_W1_MASTER_GPIO=m # # 1-wire Slaves # CONFIG_W1_SLAVE_THERM=m CONFIG_W1_SLAVE_SMEM=m # CONFIG_W1_SLAVE_DS2408 is not set # CONFIG_W1_SLAVE_DS2413 is not set # CONFIG_W1_SLAVE_DS2423 is not set CONFIG_W1_SLAVE_DS2431=m CONFIG_W1_SLAVE_DS2433=m # CONFIG_W1_SLAVE_DS2433_CRC is not set CONFIG_W1_SLAVE_DS2760=m CONFIG_W1_SLAVE_DS2780=m CONFIG_W1_SLAVE_DS2781=m CONFIG_W1_SLAVE_DS28E04=m CONFIG_W1_SLAVE_BQ27000=m CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set CONFIG_PDA_POWER=y # CONFIG_GENERIC_ADC_BATTERY is not set CONFIG_WM831X_BACKUP=m CONFIG_WM831X_POWER=y # CONFIG_TEST_POWER is not set # CONFIG_BATTERY_88PM860X is not set # CONFIG_BATTERY_DS2760 is not set CONFIG_BATTERY_DS2780=m # CONFIG_BATTERY_DS2781 is not set # CONFIG_BATTERY_DS2782 is not set CONFIG_BATTERY_SBS=y CONFIG_BATTERY_BQ27x00=m # CONFIG_BATTERY_BQ27X00_I2C is not set CONFIG_BATTERY_BQ27X00_PLATFORM=y CONFIG_BATTERY_MAX17040=y CONFIG_BATTERY_MAX17042=m # CONFIG_BATTERY_TWL4030_MADC is not set # CONFIG_CHARGER_PCF50633 is not set # CONFIG_BATTERY_RX51 is not set CONFIG_CHARGER_ISP1704=m CONFIG_CHARGER_MAX8903=m # CONFIG_CHARGER_TWL4030 is not set CONFIG_CHARGER_LP8727=y CONFIG_CHARGER_LP8788=m CONFIG_CHARGER_GPIO=m CONFIG_CHARGER_MANAGER=y CONFIG_CHARGER_MAX14577=m CONFIG_CHARGER_BQ2415X=m CONFIG_CHARGER_BQ24190=m CONFIG_CHARGER_BQ24735=y # CONFIG_CHARGER_SMB347 is not set CONFIG_CHARGER_TPS65090=y CONFIG_POWER_RESET=y CONFIG_POWER_AVS=y CONFIG_HWMON=y CONFIG_HWMON_VID=y # CONFIG_HWMON_DEBUG_CHIP is not set # # Native drivers # CONFIG_SENSORS_ABITUGURU=m # CONFIG_SENSORS_ABITUGURU3 is not set CONFIG_SENSORS_AD7414=y CONFIG_SENSORS_AD7418=m CONFIG_SENSORS_ADM1021=m CONFIG_SENSORS_ADM1025=y CONFIG_SENSORS_ADM1026=m CONFIG_SENSORS_ADM1029=y CONFIG_SENSORS_ADM1031=m CONFIG_SENSORS_ADM9240=y CONFIG_SENSORS_ADT7X10=m CONFIG_SENSORS_ADT7410=m # CONFIG_SENSORS_ADT7411 is not set CONFIG_SENSORS_ADT7462=m # CONFIG_SENSORS_ADT7470 is not set CONFIG_SENSORS_ADT7475=m # CONFIG_SENSORS_ASC7621 is not set CONFIG_SENSORS_K8TEMP=y CONFIG_SENSORS_K10TEMP=m # CONFIG_SENSORS_FAM15H_POWER is not set CONFIG_SENSORS_APPLESMC=m CONFIG_SENSORS_ASB100=m # CONFIG_SENSORS_ATXP1 is not set CONFIG_SENSORS_DS620=m CONFIG_SENSORS_DS1621=y # CONFIG_SENSORS_I5K_AMB is not set CONFIG_SENSORS_F71805F=m CONFIG_SENSORS_F71882FG=y CONFIG_SENSORS_F75375S=m CONFIG_SENSORS_MC13783_ADC=y CONFIG_SENSORS_FSCHMD=y # CONFIG_SENSORS_GL518SM is not set CONFIG_SENSORS_GL520SM=m # CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_G762 is not set # CONFIG_SENSORS_GPIO_FAN is not set CONFIG_SENSORS_HIH6130=y # CONFIG_SENSORS_IIO_HWMON is not set # CONFIG_SENSORS_CORETEMP is not set CONFIG_SENSORS_IT87=m CONFIG_SENSORS_JC42=m # CONFIG_SENSORS_LINEAGE is not set CONFIG_SENSORS_LTC2945=m # CONFIG_SENSORS_LTC4151 is not set CONFIG_SENSORS_LTC4215=y CONFIG_SENSORS_LTC4222=m CONFIG_SENSORS_LTC4245=m # CONFIG_SENSORS_LTC4260 is not set CONFIG_SENSORS_LTC4261=m CONFIG_SENSORS_MAX16065=m CONFIG_SENSORS_MAX1619=m # CONFIG_SENSORS_MAX1668 is not set CONFIG_SENSORS_MAX197=m # CONFIG_SENSORS_MAX6639 is not set CONFIG_SENSORS_MAX6642=m CONFIG_SENSORS_MAX6650=y CONFIG_SENSORS_MAX6697=y # CONFIG_SENSORS_HTU21 is not set # CONFIG_SENSORS_MCP3021 is not set CONFIG_SENSORS_LM63=m CONFIG_SENSORS_LM73=y CONFIG_SENSORS_LM75=m # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set # CONFIG_SENSORS_LM80 is not set CONFIG_SENSORS_LM83=y CONFIG_SENSORS_LM85=y # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set CONFIG_SENSORS_LM95234=m CONFIG_SENSORS_LM95241=y CONFIG_SENSORS_LM95245=m CONFIG_SENSORS_PC87360=m CONFIG_SENSORS_PC87427=y CONFIG_SENSORS_NTC_THERMISTOR=m CONFIG_SENSORS_NCT6775=m CONFIG_SENSORS_PCF8591=m # CONFIG_PMBUS is not set # CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SHT21 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set CONFIG_SENSORS_EMC1403=m # CONFIG_SENSORS_EMC2103 is not set CONFIG_SENSORS_EMC6W201=m # CONFIG_SENSORS_SMSC47M1 is not set CONFIG_SENSORS_SMSC47M192=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_SCH56XX_COMMON is not set CONFIG_SENSORS_SMM665=m # CONFIG_SENSORS_ADC128D818 is not set CONFIG_SENSORS_ADS1015=y CONFIG_SENSORS_ADS7828=y CONFIG_SENSORS_AMC6821=m CONFIG_SENSORS_INA209=y CONFIG_SENSORS_INA2XX=y CONFIG_SENSORS_THMC50=m CONFIG_SENSORS_TMP102=m # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set CONFIG_SENSORS_TWL4030_MADC=m # CONFIG_SENSORS_VIA_CPUTEMP is not set # CONFIG_SENSORS_VIA686A is not set CONFIG_SENSORS_VT1211=m # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set CONFIG_SENSORS_W83791D=m # CONFIG_SENSORS_W83792D is not set CONFIG_SENSORS_W83793=m CONFIG_SENSORS_W83795=m CONFIG_SENSORS_W83795_FANCTRL=y CONFIG_SENSORS_W83L785TS=m CONFIG_SENSORS_W83L786NG=m CONFIG_SENSORS_W83627HF=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_WM831X is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # CONFIG_SSB=m CONFIG_SSB_SPROM=y CONFIG_SSB_BLOCKIO=y CONFIG_SSB_PCIHOST_POSSIBLE=y CONFIG_SSB_PCIHOST=y CONFIG_SSB_B43_PCI_BRIDGE=y CONFIG_SSB_PCMCIAHOST_POSSIBLE=y # CONFIG_SSB_PCMCIAHOST is not set CONFIG_SSB_SDIOHOST_POSSIBLE=y CONFIG_SSB_SDIOHOST=y # CONFIG_SSB_SILENT is not set # CONFIG_SSB_DEBUG is not set CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y CONFIG_SSB_DRIVER_PCICORE=y CONFIG_SSB_DRIVER_GPIO=y CONFIG_BCMA_POSSIBLE=y # # Broadcom specific AMBA # # CONFIG_BCMA is not set # # Multifunction device drivers # CONFIG_MFD_CORE=y CONFIG_MFD_CS5535=y # CONFIG_MFD_AS3711 is not set # CONFIG_PMIC_ADP5520 is not set CONFIG_MFD_AAT2870_CORE=y CONFIG_MFD_BCM590XX=y CONFIG_MFD_CROS_EC=y # CONFIG_MFD_CROS_EC_I2C is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_DA9052_I2C is not set # CONFIG_MFD_DA9055 is not set # CONFIG_MFD_DA9063 is not set CONFIG_MFD_MC13XXX=y CONFIG_MFD_MC13XXX_I2C=y CONFIG_HTC_PASIC3=m # CONFIG_HTC_I2CPLD is not set CONFIG_LPC_ICH=y CONFIG_LPC_SCH=y CONFIG_MFD_JANZ_CMODIO=y CONFIG_MFD_KEMPLD=m CONFIG_MFD_88PM800=m CONFIG_MFD_88PM805=y CONFIG_MFD_88PM860X=y CONFIG_MFD_MAX14577=y # CONFIG_MFD_MAX77686 is not set # CONFIG_MFD_MAX77693 is not set CONFIG_MFD_MAX8907=y # CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_MAX8997 is not set # CONFIG_MFD_MAX8998 is not set # CONFIG_MFD_VIPERBOARD is not set CONFIG_MFD_RETU=y CONFIG_MFD_PCF50633=y CONFIG_PCF50633_ADC=y CONFIG_PCF50633_GPIO=m CONFIG_MFD_RDC321X=m # CONFIG_MFD_RTSX_PCI is not set CONFIG_MFD_RTSX_USB=y # CONFIG_MFD_RC5T583 is not set # CONFIG_MFD_SEC_CORE is not set CONFIG_MFD_SI476X_CORE=m CONFIG_MFD_SM501=m # CONFIG_MFD_SM501_GPIO is not set CONFIG_MFD_SMSC=y CONFIG_ABX500_CORE=y # CONFIG_AB3100_CORE is not set # CONFIG_MFD_STMPE is not set # CONFIG_MFD_SYSCON is not set CONFIG_MFD_TI_AM335X_TSCADC=m # CONFIG_MFD_LP3943 is not set CONFIG_MFD_LP8788=y # CONFIG_MFD_PALMAS is not set CONFIG_TPS6105X=y # CONFIG_TPS65010 is not set CONFIG_TPS6507X=y CONFIG_MFD_TPS65090=y CONFIG_MFD_TPS65217=m CONFIG_MFD_TPS65218=m # CONFIG_MFD_TPS6586X is not set CONFIG_MFD_TPS65910=y CONFIG_MFD_TPS65912=y # CONFIG_MFD_TPS65912_I2C is not set # CONFIG_MFD_TPS80031 is not set CONFIG_TWL4030_CORE=y CONFIG_MFD_TWL4030_AUDIO=y # CONFIG_TWL6040_CORE is not set # CONFIG_MFD_WL1273_CORE is not set CONFIG_MFD_LM3533=y # CONFIG_MFD_TIMBERDALE is not set CONFIG_MFD_TC3589X=y # CONFIG_MFD_TMIO is not set # CONFIG_MFD_VX855 is not set # CONFIG_MFD_ARIZONA_I2C is not set # CONFIG_MFD_WM8400 is not set CONFIG_MFD_WM831X=y CONFIG_MFD_WM831X_I2C=y # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_WM8994 is not set CONFIG_REGULATOR=y CONFIG_REGULATOR_DEBUG=y CONFIG_REGULATOR_FIXED_VOLTAGE=y # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set # CONFIG_REGULATOR_88PM800 is not set CONFIG_REGULATOR_88PM8607=y # CONFIG_REGULATOR_ACT8865 is not set CONFIG_REGULATOR_AD5398=m # CONFIG_REGULATOR_AAT2870 is not set # CONFIG_REGULATOR_BCM590XX is not set CONFIG_REGULATOR_DA9210=y CONFIG_REGULATOR_FAN53555=y CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_ISL6271A=m CONFIG_REGULATOR_LP3971=y CONFIG_REGULATOR_LP3972=m # CONFIG_REGULATOR_LP872X is not set CONFIG_REGULATOR_LP8755=y CONFIG_REGULATOR_LP8788=y CONFIG_REGULATOR_MAX14577=m CONFIG_REGULATOR_MAX1586=m # CONFIG_REGULATOR_MAX8649 is not set CONFIG_REGULATOR_MAX8660=y # CONFIG_REGULATOR_MAX8907 is not set CONFIG_REGULATOR_MAX8952=y CONFIG_REGULATOR_MAX8973=y CONFIG_REGULATOR_MC13XXX_CORE=y CONFIG_REGULATOR_MC13783=y CONFIG_REGULATOR_MC13892=m CONFIG_REGULATOR_PCF50633=y CONFIG_REGULATOR_PFUZE100=y # CONFIG_REGULATOR_TPS51632 is not set # CONFIG_REGULATOR_TPS6105X is not set CONFIG_REGULATOR_TPS62360=y CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y CONFIG_REGULATOR_TPS65090=m CONFIG_REGULATOR_TPS65217=m # CONFIG_REGULATOR_TPS65910 is not set CONFIG_REGULATOR_TWL4030=m # CONFIG_REGULATOR_WM831X is not set CONFIG_MEDIA_SUPPORT=y # # Multimedia core support # CONFIG_MEDIA_CAMERA_SUPPORT=y # CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y # CONFIG_MEDIA_RADIO_SUPPORT is not set CONFIG_MEDIA_RC_SUPPORT=y # CONFIG_MEDIA_CONTROLLER is not set CONFIG_VIDEO_DEV=y CONFIG_VIDEO_V4L2=y CONFIG_VIDEO_ADV_DEBUG=y CONFIG_VIDEO_FIXED_MINOR_RANGES=y CONFIG_VIDEO_TUNER=y CONFIG_V4L2_MEM2MEM_DEV=y CONFIG_VIDEOBUF_GEN=y CONFIG_VIDEOBUF_VMALLOC=y CONFIG_VIDEOBUF2_CORE=y CONFIG_VIDEOBUF2_MEMOPS=y CONFIG_VIDEOBUF2_DMA_CONTIG=y CONFIG_VIDEOBUF2_VMALLOC=y CONFIG_DVB_CORE=y # CONFIG_DVB_NET is not set # CONFIG_TTPCI_EEPROM is not set CONFIG_DVB_MAX_ADAPTERS=8 CONFIG_DVB_DYNAMIC_MINORS=y # # Media drivers # CONFIG_RC_CORE=y CONFIG_RC_MAP=y # CONFIG_RC_DECODERS is not set # CONFIG_RC_DEVICES is not set CONFIG_MEDIA_USB_SUPPORT=y # # Webcam devices # # CONFIG_USB_VIDEO_CLASS is not set # CONFIG_USB_GSPCA is not set # CONFIG_USB_PWC is not set # CONFIG_VIDEO_CPIA2 is not set # CONFIG_USB_ZR364XX is not set # CONFIG_USB_STKWEBCAM is not set # CONFIG_USB_S2255 is not set CONFIG_VIDEO_USBTV=m # # Analog/digital TV USB devices # CONFIG_VIDEO_AU0828=m # CONFIG_VIDEO_AU0828_V4L2 is not set CONFIG_VIDEO_CX231XX=y # CONFIG_VIDEO_CX231XX_RC is not set CONFIG_VIDEO_CX231XX_ALSA=m # CONFIG_VIDEO_CX231XX_DVB is not set # CONFIG_VIDEO_TM6000 is not set # # Digital TV USB devices # # CONFIG_DVB_USB is not set CONFIG_DVB_USB_V2=m CONFIG_DVB_USB_AF9015=m CONFIG_DVB_USB_AF9035=m CONFIG_DVB_USB_ANYSEE=m # CONFIG_DVB_USB_AU6610 is not set CONFIG_DVB_USB_AZ6007=m CONFIG_DVB_USB_CE6230=m # CONFIG_DVB_USB_EC168 is not set CONFIG_DVB_USB_GL861=m # CONFIG_DVB_USB_LME2510 is not set CONFIG_DVB_USB_MXL111SF=m # CONFIG_DVB_USB_RTL28XXU is not set # CONFIG_DVB_TTUSB_BUDGET is not set # CONFIG_DVB_TTUSB_DEC is not set CONFIG_SMS_USB_DRV=y # CONFIG_DVB_B2C2_FLEXCOP_USB is not set # # Webcam, TV (analog/digital) USB devices # CONFIG_VIDEO_EM28XX=m CONFIG_VIDEO_EM28XX_V4L2=m # CONFIG_VIDEO_EM28XX_ALSA is not set # CONFIG_VIDEO_EM28XX_DVB is not set CONFIG_VIDEO_EM28XX_RC=m # CONFIG_MEDIA_PCI_SUPPORT is not set CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_VIDEO_CAFE_CCIC=y # CONFIG_SOC_CAMERA is not set CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_SH_VEU=y # CONFIG_V4L_TEST_DRIVERS is not set # # Supported MMC/SDIO adapters # # CONFIG_SMS_SDIO_DRV is not set # CONFIG_MEDIA_PARPORT_SUPPORT is not set CONFIG_MEDIA_COMMON_OPTIONS=y # # common driver options # CONFIG_VIDEO_CX2341X=y CONFIG_VIDEO_TVEEPROM=y CONFIG_CYPRESS_FIRMWARE=m CONFIG_SMS_SIANO_MDTV=y CONFIG_SMS_SIANO_RC=y # # Media ancillary drivers (tuners, sensors, i2c, frontends) # # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set CONFIG_MEDIA_ATTACH=y CONFIG_VIDEO_IR_I2C=m # # Encoders, decoders, sensors and other helper chips # # # Audio decoders, processors and mixers # # CONFIG_VIDEO_TVAUDIO is not set CONFIG_VIDEO_TDA7432=y # CONFIG_VIDEO_TDA9840 is not set CONFIG_VIDEO_TEA6415C=y CONFIG_VIDEO_TEA6420=y # CONFIG_VIDEO_MSP3400 is not set CONFIG_VIDEO_CS5345=y # CONFIG_VIDEO_CS53L32A is not set CONFIG_VIDEO_TLV320AIC23B=y CONFIG_VIDEO_UDA1342=y CONFIG_VIDEO_WM8775=y CONFIG_VIDEO_WM8739=y # CONFIG_VIDEO_VP27SMPX is not set CONFIG_VIDEO_SONY_BTF_MPX=m # # RDS decoders # CONFIG_VIDEO_SAA6588=y # # Video decoders # CONFIG_VIDEO_ADV7180=m CONFIG_VIDEO_ADV7183=y CONFIG_VIDEO_BT819=m # CONFIG_VIDEO_BT856 is not set CONFIG_VIDEO_BT866=y # CONFIG_VIDEO_KS0127 is not set CONFIG_VIDEO_ML86V7667=m # CONFIG_VIDEO_SAA7110 is not set CONFIG_VIDEO_SAA711X=m # CONFIG_VIDEO_SAA7191 is not set # CONFIG_VIDEO_TVP514X is not set CONFIG_VIDEO_TVP5150=y CONFIG_VIDEO_TVP7002=m # CONFIG_VIDEO_TW2804 is not set # CONFIG_VIDEO_TW9903 is not set CONFIG_VIDEO_TW9906=y CONFIG_VIDEO_VPX3220=m # # Video and audio decoders # # CONFIG_VIDEO_SAA717X is not set CONFIG_VIDEO_CX25840=y # # Video encoders # CONFIG_VIDEO_SAA7127=m CONFIG_VIDEO_SAA7185=m # CONFIG_VIDEO_ADV7170 is not set CONFIG_VIDEO_ADV7175=m CONFIG_VIDEO_ADV7343=y CONFIG_VIDEO_ADV7393=y CONFIG_VIDEO_AK881X=y CONFIG_VIDEO_THS8200=m # # Camera sensor devices # # CONFIG_VIDEO_OV7640 is not set CONFIG_VIDEO_OV7670=y # CONFIG_VIDEO_VS6624 is not set CONFIG_VIDEO_MT9V011=m # CONFIG_VIDEO_SR030PC30 is not set # # Flash devices # # # Video improvement chips # CONFIG_VIDEO_UPD64031A=y CONFIG_VIDEO_UPD64083=y # # Audio/Video compression chips # # CONFIG_VIDEO_SAA6752HS is not set # # Miscellaneous helper chips # # CONFIG_VIDEO_THS7303 is not set CONFIG_VIDEO_M52790=m # # Sensors used on soc_camera driver # # # Customize TV tuners # CONFIG_MEDIA_TUNER_SIMPLE=m CONFIG_MEDIA_TUNER_TDA8290=m CONFIG_MEDIA_TUNER_TDA827X=y CONFIG_MEDIA_TUNER_TDA18271=m CONFIG_MEDIA_TUNER_TDA9887=m CONFIG_MEDIA_TUNER_TEA5761=m # CONFIG_MEDIA_TUNER_TEA5767 is not set # CONFIG_MEDIA_TUNER_MT20XX is not set CONFIG_MEDIA_TUNER_MT2060=y # CONFIG_MEDIA_TUNER_MT2063 is not set CONFIG_MEDIA_TUNER_MT2266=m CONFIG_MEDIA_TUNER_MT2131=m CONFIG_MEDIA_TUNER_QT1010=m CONFIG_MEDIA_TUNER_XC2028=m CONFIG_MEDIA_TUNER_XC5000=m # CONFIG_MEDIA_TUNER_XC4000 is not set CONFIG_MEDIA_TUNER_MXL5005S=m CONFIG_MEDIA_TUNER_MXL5007T=y CONFIG_MEDIA_TUNER_MC44S803=m CONFIG_MEDIA_TUNER_MAX2165=m CONFIG_MEDIA_TUNER_TDA18218=y CONFIG_MEDIA_TUNER_FC0011=y CONFIG_MEDIA_TUNER_FC0012=y CONFIG_MEDIA_TUNER_FC0013=m CONFIG_MEDIA_TUNER_TDA18212=m CONFIG_MEDIA_TUNER_E4000=m CONFIG_MEDIA_TUNER_FC2580=m CONFIG_MEDIA_TUNER_M88TS2022=y CONFIG_MEDIA_TUNER_TUA9001=y # CONFIG_MEDIA_TUNER_IT913X is not set # CONFIG_MEDIA_TUNER_R820T is not set # # Customise DVB Frontends # # # Multistandard (satellite) frontends # CONFIG_DVB_STB0899=m CONFIG_DVB_STB6100=m CONFIG_DVB_STV090x=y CONFIG_DVB_STV6110x=y CONFIG_DVB_M88DS3103=y # # Multistandard (cable + terrestrial) frontends # # CONFIG_DVB_DRXK is not set CONFIG_DVB_TDA18271C2DD=y # # DVB-S (satellite) frontends # # CONFIG_DVB_CX24110 is not set CONFIG_DVB_CX24123=y # CONFIG_DVB_MT312 is not set CONFIG_DVB_ZL10036=m CONFIG_DVB_ZL10039=y CONFIG_DVB_S5H1420=y # CONFIG_DVB_STV0288 is not set CONFIG_DVB_STB6000=m # CONFIG_DVB_STV0299 is not set CONFIG_DVB_STV6110=m # CONFIG_DVB_STV0900 is not set CONFIG_DVB_TDA8083=m CONFIG_DVB_TDA10086=m CONFIG_DVB_TDA8261=m # CONFIG_DVB_VES1X93 is not set CONFIG_DVB_TUNER_ITD1000=m # CONFIG_DVB_TUNER_CX24113 is not set CONFIG_DVB_TDA826X=y CONFIG_DVB_TUA6100=m CONFIG_DVB_CX24116=m CONFIG_DVB_CX24117=y # CONFIG_DVB_SI21XX is not set # CONFIG_DVB_TS2020 is not set CONFIG_DVB_DS3000=m # CONFIG_DVB_MB86A16 is not set CONFIG_DVB_TDA10071=y # # DVB-T (terrestrial) frontends # CONFIG_DVB_SP8870=m CONFIG_DVB_SP887X=m # CONFIG_DVB_CX22700 is not set CONFIG_DVB_CX22702=m CONFIG_DVB_S5H1432=m CONFIG_DVB_DRXD=y CONFIG_DVB_L64781=y # CONFIG_DVB_TDA1004X is not set # CONFIG_DVB_NXT6000 is not set # CONFIG_DVB_MT352 is not set CONFIG_DVB_ZL10353=m CONFIG_DVB_DIB3000MB=y # CONFIG_DVB_DIB3000MC is not set CONFIG_DVB_DIB7000M=m CONFIG_DVB_DIB7000P=y # CONFIG_DVB_DIB9000 is not set CONFIG_DVB_TDA10048=m CONFIG_DVB_AF9013=y CONFIG_DVB_EC100=m CONFIG_DVB_HD29L2=y CONFIG_DVB_STV0367=m CONFIG_DVB_CXD2820R=m CONFIG_DVB_RTL2830=m # CONFIG_DVB_RTL2832 is not set # # DVB-C (cable) frontends # CONFIG_DVB_VES1820=m # CONFIG_DVB_TDA10021 is not set # CONFIG_DVB_TDA10023 is not set CONFIG_DVB_STV0297=y # # ATSC (North American/Korean Terrestrial/Cable DTV) frontends # CONFIG_DVB_NXT200X=m # CONFIG_DVB_OR51211 is not set # CONFIG_DVB_OR51132 is not set CONFIG_DVB_BCM3510=m CONFIG_DVB_LGDT330X=m # CONFIG_DVB_LGDT3305 is not set CONFIG_DVB_LG2160=m CONFIG_DVB_S5H1409=m # CONFIG_DVB_AU8522_DTV is not set # CONFIG_DVB_AU8522_V4L is not set CONFIG_DVB_S5H1411=m # # ISDB-T (terrestrial) frontends # # CONFIG_DVB_S921 is not set # CONFIG_DVB_DIB8000 is not set # CONFIG_DVB_MB86A20S is not set # # Digital terrestrial only tuners/PLL # # CONFIG_DVB_PLL is not set # CONFIG_DVB_TUNER_DIB0070 is not set CONFIG_DVB_TUNER_DIB0090=y # # SEC control devices for DVB-S # CONFIG_DVB_DRX39XYJ=y CONFIG_DVB_LNBP21=m CONFIG_DVB_LNBP22=m CONFIG_DVB_ISL6405=y CONFIG_DVB_ISL6421=y CONFIG_DVB_ISL6423=y # CONFIG_DVB_A8293 is not set CONFIG_DVB_LGS8GL5=y CONFIG_DVB_LGS8GXX=y CONFIG_DVB_ATBM8830=y CONFIG_DVB_TDA665x=y CONFIG_DVB_IX2505V=m CONFIG_DVB_M88RS2000=m CONFIG_DVB_AF9033=y # # Tools to develop new frontends # CONFIG_DVB_DUMMY_FE=y # # Graphics support # CONFIG_AGP=m CONFIG_AGP_INTEL=m # CONFIG_AGP_SIS is not set CONFIG_AGP_VIA=m CONFIG_INTEL_GTT=m CONFIG_VGA_ARB=y CONFIG_VGA_ARB_MAX_GPUS=16 # # Direct Rendering Manager # CONFIG_DRM=m CONFIG_DRM_USB=m CONFIG_DRM_KMS_HELPER=m CONFIG_DRM_KMS_FB_HELPER=y # CONFIG_DRM_LOAD_EDID_FIRMWARE is not set CONFIG_DRM_TTM=m # # I2C encoder or helper chips # CONFIG_DRM_I2C_CH7006=m CONFIG_DRM_I2C_SIL164=m CONFIG_DRM_I2C_NXP_TDA998X=m CONFIG_DRM_TDFX=m CONFIG_DRM_R128=m # CONFIG_DRM_RADEON is not set # CONFIG_DRM_NOUVEAU is not set CONFIG_DRM_I810=m CONFIG_DRM_I915=m # CONFIG_DRM_I915_KMS is not set CONFIG_DRM_I915_FBDEV=y CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT=y # CONFIG_DRM_I915_UMS is not set # CONFIG_DRM_MGA is not set CONFIG_DRM_SIS=m # CONFIG_DRM_VIA is not set # CONFIG_DRM_SAVAGE is not set # CONFIG_DRM_VMWGFX is not set CONFIG_DRM_GMA500=m CONFIG_DRM_GMA600=y CONFIG_DRM_GMA3600=y CONFIG_DRM_UDL=m CONFIG_DRM_AST=m CONFIG_DRM_MGAG200=m CONFIG_DRM_CIRRUS_QEMU=m CONFIG_DRM_QXL=m CONFIG_DRM_BOCHS=m CONFIG_DRM_PTN3460=m # # Frame buffer Devices # CONFIG_FB=m # CONFIG_FIRMWARE_EDID is not set CONFIG_FB_DDC=m # CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=m CONFIG_FB_CFB_COPYAREA=m CONFIG_FB_CFB_IMAGEBLIT=m # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set CONFIG_FB_SYS_FILLRECT=m CONFIG_FB_SYS_COPYAREA=m CONFIG_FB_SYS_IMAGEBLIT=m # CONFIG_FB_FOREIGN_ENDIAN is not set CONFIG_FB_SYS_FOPS=m CONFIG_FB_DEFERRED_IO=y CONFIG_FB_HECUBA=m CONFIG_FB_SVGALIB=m # CONFIG_FB_MACMODES is not set CONFIG_FB_BACKLIGHT=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # # Frame buffer hardware drivers # # CONFIG_FB_CIRRUS is not set CONFIG_FB_PM2=m # CONFIG_FB_PM2_FIFO_DISCONNECT is not set CONFIG_FB_CYBER2000=m # CONFIG_FB_CYBER2000_DDC is not set # CONFIG_FB_ARC is not set # CONFIG_FB_VGA16 is not set # CONFIG_FB_UVESA is not set CONFIG_FB_N411=m CONFIG_FB_HGA=m # CONFIG_FB_OPENCORES is not set CONFIG_FB_S1D13XXX=m # CONFIG_FB_NVIDIA is not set CONFIG_FB_RIVA=m CONFIG_FB_RIVA_I2C=y # CONFIG_FB_RIVA_DEBUG is not set CONFIG_FB_RIVA_BACKLIGHT=y CONFIG_FB_I740=m CONFIG_FB_LE80578=m CONFIG_FB_CARILLO_RANCH=m CONFIG_FB_INTEL=m # CONFIG_FB_INTEL_DEBUG is not set # CONFIG_FB_INTEL_I2C is not set CONFIG_FB_MATROX=m # CONFIG_FB_MATROX_MILLENIUM is not set # CONFIG_FB_MATROX_MYSTIQUE is not set CONFIG_FB_MATROX_G=y CONFIG_FB_MATROX_I2C=m CONFIG_FB_MATROX_MAVEN=m # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set CONFIG_FB_ATY=m # CONFIG_FB_ATY_CT is not set CONFIG_FB_ATY_GX=y CONFIG_FB_ATY_BACKLIGHT=y CONFIG_FB_S3=m # CONFIG_FB_S3_DDC is not set CONFIG_FB_SAVAGE=m # CONFIG_FB_SAVAGE_I2C is not set CONFIG_FB_SAVAGE_ACCEL=y # CONFIG_FB_SIS is not set # CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set CONFIG_FB_KYRO=m CONFIG_FB_3DFX=m # CONFIG_FB_3DFX_ACCEL is not set CONFIG_FB_3DFX_I2C=y CONFIG_FB_VOODOO1=m # CONFIG_FB_VT8623 is not set # CONFIG_FB_TRIDENT is not set CONFIG_FB_ARK=m CONFIG_FB_PM3=m # CONFIG_FB_CARMINE is not set # CONFIG_FB_TMIO is not set CONFIG_FB_SM501=m CONFIG_FB_SMSCUFX=m CONFIG_FB_UDL=m CONFIG_FB_GOLDFISH=m # CONFIG_FB_VIRTUAL is not set CONFIG_FB_METRONOME=m CONFIG_FB_MB862XX=m CONFIG_FB_MB862XX_PCI_GDC=y CONFIG_FB_MB862XX_I2C=y CONFIG_FB_BROADSHEET=m # CONFIG_FB_AUO_K190X is not set CONFIG_EXYNOS_VIDEO=y CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=m # CONFIG_BACKLIGHT_GENERIC is not set CONFIG_BACKLIGHT_LM3533=m CONFIG_BACKLIGHT_PWM=m CONFIG_BACKLIGHT_SAHARA=m CONFIG_BACKLIGHT_WM831X=m CONFIG_BACKLIGHT_ADP8860=m # CONFIG_BACKLIGHT_ADP8870 is not set CONFIG_BACKLIGHT_88PM860X=m CONFIG_BACKLIGHT_PCF50633=m CONFIG_BACKLIGHT_AAT2870=m CONFIG_BACKLIGHT_LM3630A=m CONFIG_BACKLIGHT_LM3639=m # CONFIG_BACKLIGHT_LP855X is not set CONFIG_BACKLIGHT_LP8788=m CONFIG_BACKLIGHT_PANDORA=m # CONFIG_BACKLIGHT_TPS65217 is not set CONFIG_BACKLIGHT_GPIO=m CONFIG_BACKLIGHT_LV5207LP=m CONFIG_BACKLIGHT_BD6107=m CONFIG_VGASTATE=m CONFIG_HDMI=y # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=m CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y # CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_LOGO_LINUX_CLUT224=y CONFIG_SOUND=y CONFIG_SOUND_OSS_CORE=y # CONFIG_SOUND_OSS_CORE_PRECLAIM is not set CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m CONFIG_SND_RAWMIDI=m CONFIG_SND_COMPRESS_OFFLOAD=m CONFIG_SND_JACK=y # CONFIG_SND_SEQUENCER is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_PCM_OSS_PLUGINS=y # CONFIG_SND_HRTIMER is not set CONFIG_SND_DYNAMIC_MINORS=y CONFIG_SND_MAX_CARDS=32 # CONFIG_SND_SUPPORT_OLD_API is not set CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set CONFIG_SND_DEBUG=y CONFIG_SND_DEBUG_VERBOSE=y CONFIG_SND_PCM_XRUN_DEBUG=y CONFIG_SND_DMA_SGBUF=y # CONFIG_SND_RAWMIDI_SEQ is not set # CONFIG_SND_OPL3_LIB_SEQ is not set # CONFIG_SND_OPL4_LIB_SEQ is not set # CONFIG_SND_SBAWE_SEQ is not set # CONFIG_SND_EMU10K1_SEQ is not set # CONFIG_SND_DRIVERS is not set # CONFIG_SND_PCI is not set # # HD-Audio # # CONFIG_SND_USB is not set # CONFIG_SND_PCMCIA is not set CONFIG_SND_SOC=m # CONFIG_SND_ATMEL_SOC is not set CONFIG_SND_SOC_INTEL_SST=m CONFIG_SND_SOC_I2C_AND_SPI=m # # CODEC drivers # CONFIG_SND_SOC_ADAU1701=m CONFIG_SND_SOC_AK4554=m CONFIG_SND_SOC_AK4642=m CONFIG_SND_SOC_AK5386=m CONFIG_SND_SOC_CS42L52=m CONFIG_SND_SOC_CS42L73=m # CONFIG_SND_SOC_CS4270 is not set CONFIG_SND_SOC_CS4271=m # CONFIG_SND_SOC_CS42XX8_I2C is not set # CONFIG_SND_SOC_HDMI_CODEC is not set CONFIG_SND_SOC_PCM1681=m CONFIG_SND_SOC_PCM512x=m CONFIG_SND_SOC_PCM512x_I2C=m CONFIG_SND_SOC_SGTL5000=m CONFIG_SND_SOC_SIGMADSP=m # CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set CONFIG_SND_SOC_SPDIF=m CONFIG_SND_SOC_TAS5086=m CONFIG_SND_SOC_TLV320AIC3X=m CONFIG_SND_SOC_WM8510=m # CONFIG_SND_SOC_WM8523 is not set CONFIG_SND_SOC_WM8580=m CONFIG_SND_SOC_WM8711=m # CONFIG_SND_SOC_WM8728 is not set CONFIG_SND_SOC_WM8731=m # CONFIG_SND_SOC_WM8737 is not set CONFIG_SND_SOC_WM8741=m CONFIG_SND_SOC_WM8750=m CONFIG_SND_SOC_WM8753=m CONFIG_SND_SOC_WM8776=m CONFIG_SND_SOC_WM8804=m CONFIG_SND_SOC_WM8903=m CONFIG_SND_SOC_WM8962=m # CONFIG_SND_SOC_TPA6130A2 is not set CONFIG_SND_SIMPLE_CARD=m CONFIG_SOUND_PRIME=y CONFIG_SOUND_OSS=y CONFIG_SOUND_TRACEINIT=y CONFIG_SOUND_DMAP=y CONFIG_SOUND_VMIDI=m CONFIG_SOUND_TRIX=y CONFIG_SOUND_MSS=y CONFIG_SOUND_MPU401=y CONFIG_SOUND_PAS=m CONFIG_SOUND_PSS=m # CONFIG_PSS_MIXER is not set CONFIG_SOUND_SB=y # CONFIG_SOUND_YM3812 is not set # CONFIG_SOUND_UART6850 is not set # CONFIG_SOUND_AEDSP16 is not set # CONFIG_SOUND_KAHLUA is not set # # HID support # CONFIG_HID=y # CONFIG_HID_BATTERY_STRENGTH is not set CONFIG_HIDRAW=y CONFIG_UHID=m # CONFIG_HID_GENERIC is not set # # Special HID drivers # CONFIG_HID_A4TECH=m # CONFIG_HID_ACRUX is not set CONFIG_HID_APPLE=y CONFIG_HID_APPLEIR=m # CONFIG_HID_AUREAL is not set # CONFIG_HID_BELKIN is not set CONFIG_HID_CHERRY=y # CONFIG_HID_CHICONY is not set CONFIG_HID_PRODIKEYS=m # CONFIG_HID_CP2112 is not set CONFIG_HID_CYPRESS=m CONFIG_HID_DRAGONRISE=y CONFIG_DRAGONRISE_FF=y CONFIG_HID_EMS_FF=m CONFIG_HID_ELECOM=y CONFIG_HID_ELO=m CONFIG_HID_EZKEY=m CONFIG_HID_HOLTEK=m # CONFIG_HOLTEK_FF is not set CONFIG_HID_HUION=m CONFIG_HID_KEYTOUCH=y # CONFIG_HID_KYE is not set # CONFIG_HID_UCLOGIC is not set # CONFIG_HID_WALTOP is not set CONFIG_HID_GYRATION=m CONFIG_HID_ICADE=y CONFIG_HID_TWINHAN=m # CONFIG_HID_KENSINGTON is not set # CONFIG_HID_LCPOWER is not set CONFIG_HID_LENOVO_TPKBD=m CONFIG_HID_LOGITECH=y # CONFIG_HID_LOGITECH_DJ is not set CONFIG_LOGITECH_FF=y # CONFIG_LOGIRUMBLEPAD2_FF is not set CONFIG_LOGIG940_FF=y # CONFIG_LOGIWHEELS_FF is not set # CONFIG_HID_MAGICMOUSE is not set CONFIG_HID_MICROSOFT=m CONFIG_HID_MONTEREY=m # CONFIG_HID_MULTITOUCH is not set CONFIG_HID_NTRIG=m # CONFIG_HID_ORTEK is not set CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=m CONFIG_HID_PICOLCD=y # CONFIG_HID_PICOLCD_LEDS is not set # CONFIG_HID_PICOLCD_CIR is not set CONFIG_HID_PRIMAX=y # CONFIG_HID_ROCCAT is not set CONFIG_HID_SAITEK=m # CONFIG_HID_SAMSUNG is not set CONFIG_HID_SONY=m CONFIG_SONY_FF=y CONFIG_HID_SPEEDLINK=y # CONFIG_HID_STEELSERIES is not set CONFIG_HID_SUNPLUS=m CONFIG_HID_GREENASIA=y CONFIG_GREENASIA_FF=y # CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TIVO is not set CONFIG_HID_TOPSEED=y # CONFIG_HID_THINGM is not set CONFIG_HID_THRUSTMASTER=m # CONFIG_THRUSTMASTER_FF is not set CONFIG_HID_WACOM=y CONFIG_HID_WIIMOTE=y CONFIG_HID_XINMO=m CONFIG_HID_ZEROPLUS=m # CONFIG_ZEROPLUS_FF is not set CONFIG_HID_ZYDACRON=y CONFIG_HID_SENSOR_HUB=m # # USB HID support # CONFIG_USB_HID=m CONFIG_HID_PID=y CONFIG_USB_HIDDEV=y # # USB HID Boot Protocol drivers # CONFIG_USB_KBD=y CONFIG_USB_MOUSE=y # # I2C HID support # CONFIG_I2C_HID=y CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_SUPPORT=y CONFIG_USB_COMMON=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB=y CONFIG_USB_DEBUG=y # CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # # CONFIG_USB_DEFAULT_PERSIST is not set # CONFIG_USB_DYNAMIC_MINORS is not set CONFIG_USB_OTG=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y CONFIG_USB_WUSB_CBAF=y # CONFIG_USB_WUSB_CBAF_DEBUG is not set # # USB Host Controller Drivers # CONFIG_USB_C67X00_HCD=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_PLATFORM=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y CONFIG_USB_EHCI_PCI=y CONFIG_USB_EHCI_HCD_PLATFORM=y CONFIG_USB_OXU210HP_HCD=m CONFIG_USB_ISP116X_HCD=y # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_ISP1362_HCD=y # CONFIG_USB_FUSBH200_HCD is not set CONFIG_USB_FOTG210_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PCI=m # CONFIG_USB_OHCI_HCD_PLATFORM is not set CONFIG_USB_UHCI_HCD=y CONFIG_USB_U132_HCD=m CONFIG_USB_SL811_HCD=y CONFIG_USB_SL811_HCD_ISO=y CONFIG_USB_SL811_CS=m CONFIG_USB_R8A66597_HCD=y CONFIG_USB_RENESAS_USBHS_HCD=m # CONFIG_USB_HCD_SSB is not set CONFIG_USB_HCD_TEST_MODE=y CONFIG_USB_RENESAS_USBHS=y # # USB Device Class drivers # CONFIG_USB_ACM=y CONFIG_USB_PRINTER=m CONFIG_USB_WDM=y CONFIG_USB_TMC=y # # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # # also be needed; see USB_STORAGE Help for more info # # CONFIG_USB_STORAGE is not set # # USB Imaging devices # CONFIG_USB_MDC800=m # CONFIG_USB_MICROTEK is not set CONFIG_USB_MUSB_HDRC=m CONFIG_USB_MUSB_HOST=y # CONFIG_USB_MUSB_GADGET is not set # CONFIG_USB_MUSB_DUAL_ROLE is not set CONFIG_USB_MUSB_TUSB6010=m CONFIG_USB_MUSB_UX500=m CONFIG_USB_UX500_DMA=y # CONFIG_MUSB_PIO_ONLY is not set CONFIG_USB_DWC3=y CONFIG_USB_DWC3_HOST=y # CONFIG_USB_DWC3_GADGET is not set # CONFIG_USB_DWC3_DUAL_ROLE is not set # # Platform Glue Driver Support # # CONFIG_USB_DWC3_OMAP is not set # CONFIG_USB_DWC3_EXYNOS is not set # CONFIG_USB_DWC3_PCI is not set CONFIG_USB_DWC3_KEYSTONE=m # # Debugging features # CONFIG_USB_DWC3_DEBUG=y # CONFIG_USB_DWC3_VERBOSE is not set # CONFIG_USB_DWC2 is not set CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_UDC=y # CONFIG_USB_CHIPIDEA_HOST is not set CONFIG_USB_CHIPIDEA_DEBUG=y # # USB port drivers # CONFIG_USB_USS720=m CONFIG_USB_SERIAL=y # CONFIG_USB_SERIAL_CONSOLE is not set # CONFIG_USB_SERIAL_GENERIC is not set # CONFIG_USB_SERIAL_SIMPLE is not set CONFIG_USB_SERIAL_AIRCABLE=m # CONFIG_USB_SERIAL_ARK3116 is not set # CONFIG_USB_SERIAL_BELKIN is not set CONFIG_USB_SERIAL_CH341=m CONFIG_USB_SERIAL_WHITEHEAT=y CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m # CONFIG_USB_SERIAL_CP210X is not set CONFIG_USB_SERIAL_CYPRESS_M8=m # CONFIG_USB_SERIAL_EMPEG is not set CONFIG_USB_SERIAL_FTDI_SIO=m CONFIG_USB_SERIAL_VISOR=y CONFIG_USB_SERIAL_IPAQ=m CONFIG_USB_SERIAL_IR=m # CONFIG_USB_SERIAL_EDGEPORT is not set CONFIG_USB_SERIAL_EDGEPORT_TI=m CONFIG_USB_SERIAL_F81232=m CONFIG_USB_SERIAL_GARMIN=y CONFIG_USB_SERIAL_IPW=y CONFIG_USB_SERIAL_IUU=y CONFIG_USB_SERIAL_KEYSPAN_PDA=m # CONFIG_USB_SERIAL_KEYSPAN is not set CONFIG_USB_SERIAL_KLSI=y CONFIG_USB_SERIAL_KOBIL_SCT=m CONFIG_USB_SERIAL_MCT_U232=y CONFIG_USB_SERIAL_METRO=m CONFIG_USB_SERIAL_MOS7720=m CONFIG_USB_SERIAL_MOS7715_PARPORT=y CONFIG_USB_SERIAL_MOS7840=m # CONFIG_USB_SERIAL_MXUPORT is not set CONFIG_USB_SERIAL_NAVMAN=m # CONFIG_USB_SERIAL_PL2303 is not set # CONFIG_USB_SERIAL_OTI6858 is not set CONFIG_USB_SERIAL_QCAUX=y CONFIG_USB_SERIAL_QUALCOMM=y # CONFIG_USB_SERIAL_SPCP8X5 is not set CONFIG_USB_SERIAL_SAFE=m CONFIG_USB_SERIAL_SAFE_PADDED=y CONFIG_USB_SERIAL_SIERRAWIRELESS=m CONFIG_USB_SERIAL_SYMBOL=y # CONFIG_USB_SERIAL_TI is not set CONFIG_USB_SERIAL_CYBERJACK=y CONFIG_USB_SERIAL_XIRCOM=y CONFIG_USB_SERIAL_WWAN=y CONFIG_USB_SERIAL_OPTION=m # CONFIG_USB_SERIAL_OMNINET is not set CONFIG_USB_SERIAL_OPTICON=y CONFIG_USB_SERIAL_XSENS_MT=m CONFIG_USB_SERIAL_WISHBONE=y # CONFIG_USB_SERIAL_ZTE is not set CONFIG_USB_SERIAL_SSU100=m CONFIG_USB_SERIAL_QT2=m CONFIG_USB_SERIAL_DEBUG=y # # USB Miscellaneous drivers # CONFIG_USB_EMI62=y CONFIG_USB_EMI26=y CONFIG_USB_ADUTUX=m # CONFIG_USB_SEVSEG is not set CONFIG_USB_RIO500=y CONFIG_USB_LEGOTOWER=y CONFIG_USB_LCD=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set CONFIG_USB_CYTHERM=y CONFIG_USB_IDMOUSE=m CONFIG_USB_FTDI_ELAN=y # CONFIG_USB_APPLEDISPLAY is not set CONFIG_USB_SISUSBVGA=y CONFIG_USB_SISUSBVGA_CON=y CONFIG_USB_LD=y CONFIG_USB_TRANCEVIBRATOR=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set CONFIG_USB_EHSET_TEST_FIXTURE=m CONFIG_USB_ISIGHTFW=m CONFIG_USB_YUREX=y CONFIG_USB_EZUSB_FX2=y CONFIG_USB_HSIC_USB3503=y # # USB Physical Layer drivers # CONFIG_USB_PHY=y # CONFIG_USB_OTG_FSM is not set # CONFIG_NOP_USB_XCEIV is not set CONFIG_SAMSUNG_USBPHY=m CONFIG_SAMSUNG_USB2PHY=m # CONFIG_SAMSUNG_USB3PHY is not set # CONFIG_USB_GPIO_VBUS is not set CONFIG_TAHVO_USB=m # CONFIG_TAHVO_USB_HOST_BY_DEFAULT is not set CONFIG_USB_ISP1301=y # CONFIG_USB_RCAR_PHY is not set CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DEBUG=y # CONFIG_USB_GADGET_VERBOSE is not set CONFIG_USB_GADGET_DEBUG_FILES=y CONFIG_USB_GADGET_DEBUG_FS=y CONFIG_USB_GADGET_VBUS_DRAW=2 CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2 # # USB Peripheral Controller # # CONFIG_USB_FOTG210_UDC is not set CONFIG_USB_GR_UDC=y CONFIG_USB_R8A66597=m # CONFIG_USB_RENESAS_USBHS_UDC is not set CONFIG_USB_PXA27X=m CONFIG_USB_S3C_HSOTG=y CONFIG_USB_MV_UDC=m # CONFIG_USB_MV_U3D is not set CONFIG_USB_M66592=m CONFIG_USB_AMD5536UDC=y CONFIG_USB_NET2272=m CONFIG_USB_NET2272_DMA=y CONFIG_USB_NET2280=m CONFIG_USB_GOKU=m CONFIG_USB_EG20T=y CONFIG_USB_DUMMY_HCD=m CONFIG_USB_LIBCOMPOSITE=m CONFIG_USB_F_ACM=m CONFIG_USB_F_SS_LB=m CONFIG_USB_U_SERIAL=m CONFIG_USB_U_ETHER=m CONFIG_USB_F_SERIAL=m CONFIG_USB_F_OBEX=m CONFIG_USB_F_NCM=m CONFIG_USB_F_ECM=m CONFIG_USB_F_SUBSET=m CONFIG_USB_F_RNDIS=m CONFIG_USB_F_MASS_STORAGE=m CONFIG_USB_F_FS=m CONFIG_USB_CONFIGFS=m CONFIG_USB_CONFIGFS_SERIAL=y # CONFIG_USB_CONFIGFS_ACM is not set CONFIG_USB_CONFIGFS_OBEX=y CONFIG_USB_CONFIGFS_NCM=y # CONFIG_USB_CONFIGFS_ECM is not set CONFIG_USB_CONFIGFS_ECM_SUBSET=y # CONFIG_USB_CONFIGFS_RNDIS is not set # CONFIG_USB_CONFIGFS_EEM is not set # CONFIG_USB_CONFIGFS_PHONET is not set CONFIG_USB_CONFIGFS_MASS_STORAGE=y CONFIG_USB_CONFIGFS_F_LB_SS=y # CONFIG_USB_CONFIGFS_F_FS is not set # CONFIG_USB_ZERO is not set # CONFIG_USB_AUDIO is not set # CONFIG_USB_ETH is not set # CONFIG_USB_G_NCM is not set # CONFIG_USB_GADGETFS is not set CONFIG_USB_FUNCTIONFS=m CONFIG_USB_FUNCTIONFS_ETH=y # CONFIG_USB_FUNCTIONFS_RNDIS is not set CONFIG_USB_FUNCTIONFS_GENERIC=y # CONFIG_USB_MASS_STORAGE is not set CONFIG_USB_GADGET_TARGET=m CONFIG_USB_G_SERIAL=m CONFIG_USB_MIDI_GADGET=m CONFIG_USB_G_PRINTER=m CONFIG_USB_CDC_COMPOSITE=m # CONFIG_USB_G_NOKIA is not set CONFIG_USB_G_ACM_MS=m CONFIG_USB_G_MULTI=m CONFIG_USB_G_MULTI_RNDIS=y # CONFIG_USB_G_MULTI_CDC is not set # CONFIG_USB_G_HID is not set CONFIG_USB_G_DBGP=m # CONFIG_USB_G_DBGP_PRINTK is not set CONFIG_USB_G_DBGP_SERIAL=y CONFIG_USB_G_WEBCAM=m # CONFIG_UWB is not set CONFIG_MMC=m CONFIG_MMC_DEBUG=y CONFIG_MMC_CLKGATE=y # # MMC/SD/SDIO Card Drivers # CONFIG_MMC_BLOCK=m CONFIG_MMC_BLOCK_MINORS=8 # CONFIG_MMC_BLOCK_BOUNCE is not set CONFIG_SDIO_UART=m CONFIG_MMC_TEST=m # # MMC/SD/SDIO Host Controller Drivers # CONFIG_MMC_SDHCI=m CONFIG_MMC_SDHCI_PCI=m CONFIG_MMC_RICOH_MMC=y CONFIG_MMC_SDHCI_PLTFM=m CONFIG_MMC_WBSD=m CONFIG_MMC_TIFM_SD=m CONFIG_MMC_SDRICOH_CS=m # CONFIG_MMC_CB710 is not set CONFIG_MMC_VIA_SDMMC=m # CONFIG_MMC_VUB300 is not set # CONFIG_MMC_USHC is not set CONFIG_MEMSTICK=y CONFIG_MEMSTICK_DEBUG=y # # MemoryStick drivers # CONFIG_MEMSTICK_UNSAFE_RESUME=y CONFIG_MSPRO_BLOCK=y CONFIG_MS_BLOCK=y # # MemoryStick Host Controller Drivers # CONFIG_MEMSTICK_TIFM_MS=y # CONFIG_MEMSTICK_JMICRON_38X is not set # CONFIG_MEMSTICK_R592 is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y # # LED drivers # CONFIG_LEDS_88PM860X=y CONFIG_LEDS_LM3530=y # CONFIG_LEDS_LM3533 is not set CONFIG_LEDS_LM3642=y CONFIG_LEDS_PCA9532=m CONFIG_LEDS_PCA9532_GPIO=y CONFIG_LEDS_GPIO=y CONFIG_LEDS_LP3944=m CONFIG_LEDS_LP55XX_COMMON=y # CONFIG_LEDS_LP5521 is not set CONFIG_LEDS_LP5523=y # CONFIG_LEDS_LP5562 is not set CONFIG_LEDS_LP8501=m # CONFIG_LEDS_LP8788 is not set # CONFIG_LEDS_CLEVO_MAIL is not set CONFIG_LEDS_PCA955X=y # CONFIG_LEDS_PCA963X is not set CONFIG_LEDS_PCA9685=m CONFIG_LEDS_WM831X_STATUS=y # CONFIG_LEDS_PWM is not set # CONFIG_LEDS_REGULATOR is not set CONFIG_LEDS_BD2802=y CONFIG_LEDS_INTEL_SS4200=m # CONFIG_LEDS_LT3593 is not set # CONFIG_LEDS_MC13783 is not set CONFIG_LEDS_TCA6507=y CONFIG_LEDS_LM355x=y CONFIG_LEDS_BLINKM=m # # LED Triggers # CONFIG_LEDS_TRIGGERS=y # CONFIG_LEDS_TRIGGER_TIMER is not set CONFIG_LEDS_TRIGGER_ONESHOT=m # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set CONFIG_LEDS_TRIGGER_BACKLIGHT=m CONFIG_LEDS_TRIGGER_CPU=y CONFIG_LEDS_TRIGGER_GPIO=y # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set # # iptables trigger is under Netfilter config (LED target) # # CONFIG_LEDS_TRIGGER_TRANSIENT is not set CONFIG_LEDS_TRIGGER_CAMERA=y CONFIG_ACCESSIBILITY=y CONFIG_A11Y_BRAILLE_CONSOLE=y # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y # CONFIG_RTC_HCTOSYS is not set # CONFIG_RTC_SYSTOHC is not set # CONFIG_RTC_DEBUG is not set # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=y # CONFIG_RTC_INTF_PROC is not set CONFIG_RTC_INTF_DEV=y CONFIG_RTC_INTF_DEV_UIE_EMUL=y CONFIG_RTC_DRV_TEST=y # # I2C RTC drivers # CONFIG_RTC_DRV_88PM860X=y CONFIG_RTC_DRV_88PM80X=m CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_DS1374=m # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_DS3232 is not set # CONFIG_RTC_DRV_LP8788 is not set CONFIG_RTC_DRV_MAX6900=y CONFIG_RTC_DRV_MAX8907=m CONFIG_RTC_DRV_RS5C372=m CONFIG_RTC_DRV_ISL1208=y # CONFIG_RTC_DRV_ISL12022 is not set # CONFIG_RTC_DRV_ISL12057 is not set CONFIG_RTC_DRV_X1205=m CONFIG_RTC_DRV_PCF2127=y CONFIG_RTC_DRV_PCF8523=m CONFIG_RTC_DRV_PCF8563=y CONFIG_RTC_DRV_PCF8583=m CONFIG_RTC_DRV_M41T80=m CONFIG_RTC_DRV_M41T80_WDT=y CONFIG_RTC_DRV_BQ32K=y CONFIG_RTC_DRV_TWL4030=y CONFIG_RTC_DRV_TPS65910=y # CONFIG_RTC_DRV_S35390A is not set CONFIG_RTC_DRV_FM3130=y # CONFIG_RTC_DRV_RX8581 is not set CONFIG_RTC_DRV_RX8025=m CONFIG_RTC_DRV_EM3027=m # CONFIG_RTC_DRV_RV3029C2 is not set # # SPI RTC drivers # # # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y CONFIG_RTC_DRV_DS1286=y # CONFIG_RTC_DRV_DS1511 is not set CONFIG_RTC_DRV_DS1553=y CONFIG_RTC_DRV_DS1742=y CONFIG_RTC_DRV_STK17TA8=y CONFIG_RTC_DRV_M48T86=m CONFIG_RTC_DRV_M48T35=m CONFIG_RTC_DRV_M48T59=m # CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_RP5C01 is not set CONFIG_RTC_DRV_V3020=y # CONFIG_RTC_DRV_DS2404 is not set CONFIG_RTC_DRV_WM831X=m # CONFIG_RTC_DRV_PCF50633 is not set # # on-CPU RTC drivers # CONFIG_RTC_DRV_MC13XXX=y CONFIG_RTC_DRV_MOXART=y # # HID Sensor RTC drivers # CONFIG_RTC_DRV_HID_SENSOR_TIME=m # CONFIG_DMADEVICES is not set CONFIG_AUXDISPLAY=y CONFIG_UIO=y # CONFIG_UIO_CIF is not set # CONFIG_UIO_PDRV_GENIRQ is not set CONFIG_UIO_DMEM_GENIRQ=m # CONFIG_UIO_AEC is not set # CONFIG_UIO_SERCOS3 is not set CONFIG_UIO_PCI_GENERIC=y CONFIG_UIO_NETX=y CONFIG_UIO_MF624=m # CONFIG_VIRT_DRIVERS is not set CONFIG_VIRTIO=y # # Virtio drivers # CONFIG_VIRTIO_PCI=y CONFIG_VIRTIO_BALLOON=m CONFIG_VIRTIO_MMIO=y CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y # # Microsoft Hyper-V guest support # # CONFIG_STAGING is not set CONFIG_X86_PLATFORM_DEVICES=y # CONFIG_DELL_LAPTOP is not set CONFIG_SENSORS_HDAPS=y # CONFIG_IBM_RTL is not set CONFIG_SAMSUNG_LAPTOP=m # CONFIG_CHROME_PLATFORMS is not set # # Hardware Spinlock drivers # CONFIG_CLKEVT_I8253=y CONFIG_I8253_LOCK=y CONFIG_CLKBLD_I8253=y # CONFIG_SH_TIMER_CMT is not set # CONFIG_SH_TIMER_MTU2 is not set # CONFIG_SH_TIMER_TMU is not set # CONFIG_EM_TIMER_STI is not set CONFIG_MAILBOX=y # CONFIG_IOMMU_SUPPORT is not set # # Remoteproc drivers # # CONFIG_STE_MODEM_RPROC is not set # # Rpmsg drivers # # CONFIG_PM_DEVFREQ is not set CONFIG_EXTCON=y # # Extcon Device Drivers # CONFIG_EXTCON_GPIO=y # CONFIG_EXTCON_ADC_JACK is not set CONFIG_EXTCON_MAX14577=y CONFIG_MEMORY=y CONFIG_IIO=m CONFIG_IIO_BUFFER=y CONFIG_IIO_BUFFER_CB=y CONFIG_IIO_KFIFO_BUF=m CONFIG_IIO_TRIGGERED_BUFFER=m CONFIG_IIO_TRIGGER=y CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 # # Accelerometers # CONFIG_BMA180=m CONFIG_HID_SENSOR_ACCEL_3D=m # CONFIG_IIO_ST_ACCEL_3AXIS is not set # # Analog to digital converters # CONFIG_LP8788_ADC=m CONFIG_MAX1363=m # CONFIG_MCP3422 is not set # CONFIG_MEN_Z188_ADC is not set CONFIG_NAU7802=m CONFIG_TI_ADC081C=m # CONFIG_TI_AM335X_ADC is not set CONFIG_TWL4030_MADC=m CONFIG_TWL6030_GPADC=m # # Amplifiers # # # Hid Sensor IIO Common # CONFIG_HID_SENSOR_IIO_COMMON=m CONFIG_HID_SENSOR_IIO_TRIGGER=m CONFIG_IIO_ST_SENSORS_I2C=m CONFIG_IIO_ST_SENSORS_CORE=m # # Digital to analog converters # # CONFIG_AD5064 is not set CONFIG_AD5380=m CONFIG_AD5446=m # CONFIG_MAX517 is not set CONFIG_MCP4725=m # # Frequency Synthesizers DDS/PLL # # # Clock Generator/Distribution # # # Phase-Locked Loop (PLL) frequency synthesizers # # # Digital gyroscope sensors # # CONFIG_HID_SENSOR_GYRO_3D is not set CONFIG_IIO_ST_GYRO_3AXIS=m CONFIG_IIO_ST_GYRO_I2C_3AXIS=m CONFIG_ITG3200=m # # Humidity sensors # CONFIG_DHT11=m CONFIG_SI7005=m # # Inertial measurement units # # CONFIG_INV_MPU6050_IIO is not set # # Light sensors # # CONFIG_ADJD_S311 is not set CONFIG_APDS9300=m CONFIG_CM32181=m CONFIG_CM36651=m CONFIG_GP2AP020A00F=m CONFIG_HID_SENSOR_ALS=m CONFIG_HID_SENSOR_PROX=m CONFIG_SENSORS_LM3533=m # CONFIG_LTR501 is not set # CONFIG_TCS3472 is not set CONFIG_SENSORS_TSL2563=m CONFIG_TSL4531=m # CONFIG_VCNL4000 is not set # # Magnetometer sensors # # CONFIG_AK8975 is not set # CONFIG_MAG3110 is not set CONFIG_HID_SENSOR_MAGNETOMETER_3D=m CONFIG_IIO_ST_MAGN_3AXIS=m CONFIG_IIO_ST_MAGN_I2C_3AXIS=m # # Inclinometer sensors # CONFIG_HID_SENSOR_INCLINOMETER_3D=m # # Triggers - standalone # CONFIG_IIO_INTERRUPT_TRIGGER=m # CONFIG_IIO_SYSFS_TRIGGER is not set # # Pressure sensors # # CONFIG_HID_SENSOR_PRESS is not set CONFIG_MPL3115=m # CONFIG_IIO_ST_PRESS is not set # # Temperature sensors # # CONFIG_TMP006 is not set # CONFIG_NTB is not set CONFIG_VME_BUS=y # # VME Bridge Drivers # CONFIG_VME_CA91CX42=m CONFIG_VME_TSI148=y # # VME Board Drivers # # CONFIG_VMIVME_7805 is not set # # VME Device Drivers # CONFIG_PWM=y CONFIG_PWM_SYSFS=y # CONFIG_PWM_TWL is not set CONFIG_PWM_TWL_LED=y CONFIG_IPACK_BUS=y # CONFIG_BOARD_TPCI200 is not set # CONFIG_SERIAL_IPOCTAL is not set CONFIG_RESET_CONTROLLER=y CONFIG_FMC=y # CONFIG_FMC_FAKEDEV is not set CONFIG_FMC_TRIVIAL=m CONFIG_FMC_WRITE_EEPROM=m CONFIG_FMC_CHARDEV=y # # PHY Subsystem # CONFIG_GENERIC_PHY=y # CONFIG_BCM_KONA_USB2_PHY is not set # CONFIG_PHY_SAMSUNG_USB2 is not set CONFIG_POWERCAP=y # CONFIG_INTEL_RAPL is not set CONFIG_MCB=m CONFIG_MCB_PCI=m # # Firmware Drivers # # CONFIG_EDD is not set # CONFIG_FIRMWARE_MEMMAP is not set CONFIG_DELL_RBU=m CONFIG_DCDBAS=m # CONFIG_DMIID is not set CONFIG_DMI_SYSFS=y CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y CONFIG_GOOGLE_FIRMWARE=y # # Google Firmware Drivers # CONFIG_GOOGLE_MEMCONSOLE=m # # File systems # CONFIG_DCACHE_WORD_ACCESS=y CONFIG_EXT2_FS=m # CONFIG_EXT2_FS_XATTR is not set CONFIG_EXT2_FS_XIP=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y CONFIG_EXT4_FS=y # CONFIG_EXT4_FS_POSIX_ACL is not set # CONFIG_EXT4_FS_SECURITY is not set # CONFIG_EXT4_DEBUG is not set CONFIG_FS_XIP=y CONFIG_JBD=y CONFIG_JBD_DEBUG=y CONFIG_JBD2=y CONFIG_JBD2_DEBUG=y CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=m CONFIG_REISERFS_CHECK=y CONFIG_REISERFS_PROC_INFO=y # CONFIG_REISERFS_FS_XATTR is not set CONFIG_JFS_FS=y CONFIG_JFS_POSIX_ACL=y CONFIG_JFS_SECURITY=y CONFIG_JFS_DEBUG=y CONFIG_JFS_STATISTICS=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_POSIX_ACL is not set CONFIG_XFS_RT=y # CONFIG_XFS_WARN is not set # CONFIG_XFS_DEBUG is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_BTRFS_FS=m CONFIG_BTRFS_FS_POSIX_ACL=y # CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set # CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set CONFIG_BTRFS_DEBUG=y CONFIG_BTRFS_ASSERT=y CONFIG_NILFS2_FS=m CONFIG_FS_POSIX_ACL=y CONFIG_EXPORTFS=m CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY_USER=y CONFIG_FANOTIFY=y CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set CONFIG_QUOTA_DEBUG=y CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set CONFIG_QFMT_V2=m CONFIG_QUOTACTL=y CONFIG_QUOTACTL_COMPAT=y # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=y CONFIG_CUSE=m # # Caches # CONFIG_FSCACHE=m # CONFIG_FSCACHE_STATS is not set # CONFIG_FSCACHE_HISTOGRAM is not set CONFIG_FSCACHE_DEBUG=y CONFIG_FSCACHE_OBJECT_LIST=y CONFIG_CACHEFILES=m # CONFIG_CACHEFILES_DEBUG is not set CONFIG_CACHEFILES_HISTOGRAM=y # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m # CONFIG_JOLIET is not set # CONFIG_ZISOFS is not set # CONFIG_UDF_FS is not set # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y # CONFIG_VFAT_FS is not set CONFIG_FAT_DEFAULT_CODEPAGE=437 # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set # CONFIG_PROC_SYSCTL is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_KERNFS=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=y # CONFIG_MISC_FILESYSTEMS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V2 is not set # CONFIG_NFS_V3 is not set CONFIG_NFS_V4=y # CONFIG_NFS_SWAP is not set CONFIG_NFS_V4_1=y # CONFIG_NFS_V4_2 is not set CONFIG_PNFS_FILE_LAYOUT=y CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" # CONFIG_NFS_V4_1_MIGRATION is not set # CONFIG_ROOT_NFS is not set CONFIG_NFS_USE_LEGACY_DNS=y CONFIG_NFSD=m # CONFIG_NFSD_V3 is not set # CONFIG_NFSD_V4 is not set CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_SUNRPC_BACKCHANNEL=y # CONFIG_RPCSEC_GSS_KRB5 is not set CONFIG_CEPH_FS=y CONFIG_CEPH_FS_POSIX_ACL=y CONFIG_CIFS=y # CONFIG_CIFS_STATS is not set CONFIG_CIFS_WEAK_PW_HASH=y CONFIG_CIFS_UPCALL=y # CONFIG_CIFS_XATTR is not set # CONFIG_CIFS_DEBUG is not set CONFIG_CIFS_DFS_UPCALL=y # CONFIG_CIFS_SMB2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set CONFIG_AFS_FS=m # CONFIG_AFS_DEBUG is not set CONFIG_AFS_FSCACHE=y CONFIG_9P_FS=y # CONFIG_9P_FS_POSIX_ACL is not set # CONFIG_9P_FS_SECURITY is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_CODEPAGE_737=y CONFIG_NLS_CODEPAGE_775=y # CONFIG_NLS_CODEPAGE_850 is not set CONFIG_NLS_CODEPAGE_852=y CONFIG_NLS_CODEPAGE_855=m CONFIG_NLS_CODEPAGE_857=m CONFIG_NLS_CODEPAGE_860=y CONFIG_NLS_CODEPAGE_861=y # CONFIG_NLS_CODEPAGE_862 is not set CONFIG_NLS_CODEPAGE_863=m # CONFIG_NLS_CODEPAGE_864 is not set CONFIG_NLS_CODEPAGE_865=y CONFIG_NLS_CODEPAGE_866=m CONFIG_NLS_CODEPAGE_869=y # CONFIG_NLS_CODEPAGE_936 is not set CONFIG_NLS_CODEPAGE_950=m # CONFIG_NLS_CODEPAGE_932 is not set CONFIG_NLS_CODEPAGE_949=y CONFIG_NLS_CODEPAGE_874=m # CONFIG_NLS_ISO8859_8 is not set CONFIG_NLS_CODEPAGE_1250=m # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set CONFIG_NLS_ISO8859_3=y CONFIG_NLS_ISO8859_4=m CONFIG_NLS_ISO8859_5=y CONFIG_NLS_ISO8859_6=m CONFIG_NLS_ISO8859_7=y CONFIG_NLS_ISO8859_9=m # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_MAC_ROMAN=m CONFIG_NLS_MAC_CELTIC=m CONFIG_NLS_MAC_CENTEURO=m CONFIG_NLS_MAC_CROATIAN=y # CONFIG_NLS_MAC_CYRILLIC is not set CONFIG_NLS_MAC_GAELIC=m CONFIG_NLS_MAC_GREEK=m CONFIG_NLS_MAC_ICELAND=y # CONFIG_NLS_MAC_INUIT is not set CONFIG_NLS_MAC_ROMANIAN=y CONFIG_NLS_MAC_TURKISH=y CONFIG_NLS_UTF8=y CONFIG_DLM=m CONFIG_DLM_DEBUG=y # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # # printk and dmesg options # # CONFIG_PRINTK_TIME is not set CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4 # CONFIG_BOOT_PRINTK_DELAY is not set CONFIG_DYNAMIC_DEBUG=y # # Compile-time checks and compiler options # # CONFIG_DEBUG_INFO is not set CONFIG_ENABLE_WARN_DEPRECATED=y # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=1024 # CONFIG_STRIP_ASM_SYMS is not set CONFIG_READABLE_ASM=y CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_SECTION_MISMATCH is not set CONFIG_ARCH_WANT_FRAME_POINTERS=y CONFIG_FRAME_POINTER=y CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y CONFIG_MAGIC_SYSRQ=y CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1 CONFIG_DEBUG_KERNEL=y # # Memory Debugging # # CONFIG_DEBUG_PAGEALLOC is not set CONFIG_DEBUG_OBJECTS=y # CONFIG_DEBUG_OBJECTS_SELFTEST is not set # CONFIG_DEBUG_OBJECTS_FREE is not set # CONFIG_DEBUG_OBJECTS_TIMERS is not set # CONFIG_DEBUG_OBJECTS_WORK is not set CONFIG_DEBUG_OBJECTS_RCU_HEAD=y CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1 CONFIG_SLUB_STATS=y CONFIG_HAVE_DEBUG_KMEMLEAK=y # CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_VM=y CONFIG_DEBUG_VM_RB=y # CONFIG_DEBUG_VIRTUAL is not set CONFIG_DEBUG_MEMORY_INIT=y CONFIG_DEBUG_PER_CPU_MAPS=y CONFIG_HAVE_DEBUG_STACKOVERFLOW=y # CONFIG_DEBUG_STACKOVERFLOW is not set CONFIG_HAVE_ARCH_KMEMCHECK=y # CONFIG_KMEMCHECK is not set # CONFIG_DEBUG_SHIRQ is not set # # Debug Lockups and Hangs # CONFIG_LOCKUP_DETECTOR=y CONFIG_HARDLOCKUP_DETECTOR=y CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_DETECT_HUNG_TASK=y CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_PANIC_ON_OOPS is not set CONFIG_PANIC_ON_OOPS_VALUE=0 CONFIG_PANIC_TIMEOUT=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # # Lock Debugging (spinlocks, mutexes, etc...) # CONFIG_DEBUG_RT_MUTEXES=y CONFIG_DEBUG_PI_LIST=y CONFIG_RT_MUTEX_TESTER=y CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_PROVE_LOCKING=y CONFIG_LOCKDEP=y # CONFIG_LOCK_STAT is not set CONFIG_DEBUG_LOCKDEP=y # CONFIG_DEBUG_ATOMIC_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set CONFIG_LOCK_TORTURE_TEST=y CONFIG_TRACE_IRQFLAGS=y CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_LIST is not set CONFIG_DEBUG_SG=y # CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_DEBUG_CREDENTIALS is not set # # RCU Debugging # # CONFIG_PROVE_RCU is not set # CONFIG_SPARSE_RCU_POINTER is not set CONFIG_TORTURE_TEST=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_RCU_CPU_STALL_TIMEOUT=21 # CONFIG_RCU_CPU_STALL_INFO is not set # CONFIG_RCU_TRACE is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set CONFIG_NOTIFIER_ERROR_INJECTION=m CONFIG_PM_NOTIFIER_ERROR_INJECT=m CONFIG_FAULT_INJECTION=y CONFIG_FAILSLAB=y CONFIG_FAIL_PAGE_ALLOC=y CONFIG_FAIL_MAKE_REQUEST=y # CONFIG_FAIL_IO_TIMEOUT is not set CONFIG_FAIL_MMC_REQUEST=y CONFIG_FAULT_INJECTION_DEBUG_FS=y # CONFIG_LATENCYTOP is not set CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y # CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set CONFIG_USER_STACKTRACE_SUPPORT=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_HAVE_FENTRY=y CONFIG_HAVE_C_RECORDMCOUNT=y CONFIG_TRACE_CLOCK=y CONFIG_RING_BUFFER=y CONFIG_RING_BUFFER_ALLOW_SWAP=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set # # Runtime Testing # # CONFIG_LKDTM is not set # CONFIG_TEST_LIST_SORT is not set # CONFIG_KPROBES_SANITY_TEST is not set CONFIG_BACKTRACE_SELF_TEST=y CONFIG_RBTREE_TEST=y # CONFIG_INTERVAL_TREE_TEST is not set CONFIG_PERCPU_TEST=m # CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_TEST_STRING_HELPERS is not set CONFIG_TEST_KSTRTOX=y # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set CONFIG_DMA_API_DEBUG=y # CONFIG_TEST_MODULE is not set CONFIG_TEST_USER_COPY=m CONFIG_SAMPLES=y # CONFIG_SAMPLE_KOBJECT is not set # CONFIG_SAMPLE_KPROBES is not set # CONFIG_SAMPLE_HW_BREAKPOINT is not set # CONFIG_SAMPLE_KFIFO is not set CONFIG_SAMPLE_KDB=m CONFIG_HAVE_ARCH_KGDB=y CONFIG_KGDB=y CONFIG_KGDB_SERIAL_CONSOLE=y # CONFIG_KGDB_TESTS is not set CONFIG_KGDB_LOW_LEVEL_TRAP=y CONFIG_KGDB_KDB=y # CONFIG_KDB_KEYBOARD is not set CONFIG_KDB_CONTINUE_CATASTROPHIC=0 CONFIG_STRICT_DEVMEM=y CONFIG_X86_VERBOSE_BOOTUP=y CONFIG_EARLY_PRINTK=y CONFIG_EARLY_PRINTK_DBGP=y CONFIG_X86_PTDUMP=y # CONFIG_DEBUG_RODATA is not set # CONFIG_DEBUG_SET_MODULE_RONX is not set # CONFIG_DEBUG_NX_TEST is not set CONFIG_DOUBLEFAULT=y # CONFIG_DEBUG_TLBFLUSH is not set # CONFIG_IOMMU_STRESS is not set CONFIG_HAVE_MMIOTRACE_SUPPORT=y # CONFIG_X86_DECODER_SELFTEST is not set CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 CONFIG_IO_DELAY_TYPE_NONE=3 CONFIG_IO_DELAY_0X80=y # CONFIG_IO_DELAY_0XED is not set # CONFIG_IO_DELAY_UDELAY is not set # CONFIG_IO_DELAY_NONE is not set CONFIG_DEFAULT_IO_DELAY_TYPE=0 # CONFIG_DEBUG_BOOT_PARAMS is not set # CONFIG_CPA_DEBUG is not set CONFIG_OPTIMIZE_INLINING=y CONFIG_DEBUG_NMI_SELFTEST=y # CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set # # Security options # CONFIG_KEYS=y # CONFIG_PERSISTENT_KEYRINGS is not set CONFIG_BIG_KEYS=y CONFIG_TRUSTED_KEYS=m CONFIG_ENCRYPTED_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY_DMESG_RESTRICT is not set CONFIG_SECURITY=y CONFIG_SECURITYFS=y CONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_NETWORK_XFRM=y CONFIG_SECURITY_PATH=y # CONFIG_SECURITY_SELINUX is not set # CONFIG_SECURITY_SMACK is not set CONFIG_SECURITY_TOMOYO=y CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048 CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024 # CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init" CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init" CONFIG_SECURITY_APPARMOR=y CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1 CONFIG_SECURITY_APPARMOR_HASH=y CONFIG_SECURITY_YAMA=y CONFIG_SECURITY_YAMA_STACKED=y CONFIG_INTEGRITY=y # CONFIG_INTEGRITY_SIGNATURE is not set # CONFIG_INTEGRITY_AUDIT is not set CONFIG_IMA=y CONFIG_IMA_MEASURE_PCR_IDX=10 CONFIG_IMA_TEMPLATE=y # CONFIG_IMA_NG_TEMPLATE is not set # CONFIG_IMA_SIG_TEMPLATE is not set CONFIG_IMA_DEFAULT_TEMPLATE="ima" CONFIG_IMA_DEFAULT_HASH_SHA1=y CONFIG_IMA_DEFAULT_HASH="sha1" CONFIG_IMA_APPRAISE=y CONFIG_EVM=y CONFIG_EVM_HMAC_VERSION=2 # CONFIG_DEFAULT_SECURITY_TOMOYO is not set # CONFIG_DEFAULT_SECURITY_APPARMOR is not set CONFIG_DEFAULT_SECURITY_YAMA=y # CONFIG_DEFAULT_SECURITY_DAC is not set CONFIG_DEFAULT_SECURITY="yama" CONFIG_XOR_BLOCKS=m CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_FIPS=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_PCOMP=m CONFIG_CRYPTO_PCOMP2=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_USER=m # CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set CONFIG_CRYPTO_GF128MUL=y CONFIG_CRYPTO_NULL=y # CONFIG_CRYPTO_PCRYPT is not set CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=y CONFIG_CRYPTO_TEST=m CONFIG_CRYPTO_ABLK_HELPER=m CONFIG_CRYPTO_GLUE_HELPER_X86=m # # Authenticated Encryption with Associated Data # CONFIG_CRYPTO_CCM=m CONFIG_CRYPTO_GCM=m CONFIG_CRYPTO_SEQIV=m # # Block modes # CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_CTR=m CONFIG_CRYPTO_CTS=y CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=y # # Hash modes # CONFIG_CRYPTO_CMAC=y CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=y CONFIG_CRYPTO_CRC32C_INTEL=y # CONFIG_CRYPTO_CRC32 is not set CONFIG_CRYPTO_CRC32_PCLMUL=y CONFIG_CRYPTO_CRCT10DIF=y # CONFIG_CRYPTO_CRCT10DIF_PCLMUL is not set CONFIG_CRYPTO_GHASH=y CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m # CONFIG_CRYPTO_RMD128 is not set CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=y CONFIG_CRYPTO_SHA1=y # CONFIG_CRYPTO_SHA1_SSSE3 is not set # CONFIG_CRYPTO_SHA256_SSSE3 is not set # CONFIG_CRYPTO_SHA512_SSSE3 is not set CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=y # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set # # Ciphers # CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_AES_X86_64=m CONFIG_CRYPTO_AES_NI_INTEL=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_ARC4=y # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_BLOWFISH_X86_64 is not set CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_CAMELLIA_X86_64 is not set # CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set # CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set CONFIG_CRYPTO_CAST_COMMON=m CONFIG_CRYPTO_CAST5=m # CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set CONFIG_CRYPTO_CAST6=m # CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=y CONFIG_CRYPTO_SALSA20=m # CONFIG_CRYPTO_SALSA20_X86_64 is not set # CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set # CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set # CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=y CONFIG_CRYPTO_TWOFISH_COMMON=y # CONFIG_CRYPTO_TWOFISH_X86_64 is not set # CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set # CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set # # Compression # CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_ZLIB=m # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_LZ4=y # CONFIG_CRYPTO_LZ4HC is not set # # Random Number Generation # CONFIG_CRYPTO_ANSI_CPRNG=m CONFIG_CRYPTO_USER_API=y CONFIG_CRYPTO_USER_API_HASH=m CONFIG_CRYPTO_USER_API_SKCIPHER=y CONFIG_CRYPTO_HASH_INFO=y CONFIG_CRYPTO_HW=y CONFIG_CRYPTO_DEV_PADLOCK=y CONFIG_CRYPTO_DEV_PADLOCK_AES=m # CONFIG_CRYPTO_DEV_PADLOCK_SHA is not set # CONFIG_CRYPTO_DEV_CCP is not set CONFIG_ASYMMETRIC_KEY_TYPE=y CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y CONFIG_PUBLIC_KEY_ALGO_RSA=y CONFIG_X509_CERTIFICATE_PARSER=y CONFIG_HAVE_KVM=y CONFIG_VIRTUALIZATION=y # CONFIG_KVM is not set # CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_RAID6_PQ=m CONFIG_BITREVERSE=y CONFIG_GENERIC_STRNCPY_FROM_USER=y CONFIG_GENERIC_STRNLEN_USER=y CONFIG_GENERIC_NET_UTILS=y CONFIG_GENERIC_FIND_FIRST_BIT=y CONFIG_GENERIC_PCI_IOMAP=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_IO=y CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y CONFIG_CRC_CCITT=y CONFIG_CRC16=y CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC32_SELFTEST is not set # CONFIG_CRC32_SLICEBY8 is not set # CONFIG_CRC32_SLICEBY4 is not set CONFIG_CRC32_SARWATE=y # CONFIG_CRC32_BIT is not set CONFIG_CRC7=m CONFIG_LIBCRC32C=y CONFIG_CRC8=y # CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set CONFIG_RANDOM32_SELFTEST=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y CONFIG_LZ4_COMPRESS=y CONFIG_LZ4_DECOMPRESS=y CONFIG_XZ_DEC=y # CONFIG_XZ_DEC_X86 is not set # CONFIG_XZ_DEC_POWERPC is not set CONFIG_XZ_DEC_IA64=y # CONFIG_XZ_DEC_ARM is not set CONFIG_XZ_DEC_ARMTHUMB=y CONFIG_XZ_DEC_SPARC=y CONFIG_XZ_DEC_BCJ=y CONFIG_XZ_DEC_TEST=y CONFIG_GENERIC_ALLOCATOR=y CONFIG_BTREE=y CONFIG_ASSOCIATIVE_ARRAY=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT_MAP=y CONFIG_HAS_DMA=y CONFIG_CHECK_SIGNATURE=y # CONFIG_CPUMASK_OFFSTACK is not set CONFIG_CPU_RMAP=y CONFIG_DQL=y CONFIG_NLATTR=y CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y CONFIG_AVERAGE=y CONFIG_CLZ_TAB=y CONFIG_CORDIC=m # CONFIG_DDR is not set CONFIG_MPILIB=y CONFIG_OID_REGISTRY=y CONFIG_FONT_SUPPORT=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 2/2] sched: Fix next_balance logic in rebalance_domains() and idle_balance() 2014-05-08 17:38 ` Ingo Molnar @ 2014-05-08 18:15 ` Jason Low 2014-05-08 22:14 ` Jason Low 1 sibling, 0 replies; 15+ messages in thread From: Jason Low @ 2014-05-08 18:15 UTC (permalink / raw) To: Ingo Molnar Cc: peterz, linux-kernel, daniel.lezcano, alex.shi, preeti, efault, vincent.guittot, morten.rasmussen, aswin, jason.low2 On Thu, 2014-05-08 at 19:38 +0200, Ingo Molnar wrote: > * Jason Low <jason.low2@hp.com> wrote: > > > On Mon, 2014-04-28 at 15:45 -0700, Jason Low wrote: > > > Currently, in idle_balance(), we update rq->next_balance when we pull_tasks. > > > However, it is also important to update this in the !pulled_tasks case too. > > > > > > When the CPU is "busy" (the CPU isn't idle), rq->next_balance gets computed > > > using sd->busy_factor (so we increase the balance interval when the CPU is > > > busy). However, when the CPU goes idle, rq->next_balance could still be set > > > to a large value that was computed with the sd->busy_factor. > > > > > > Thus, we need to also update rq->next_balance in idle_balance() in the cases > > > where !pulled_tasks too, so that rq->next_balance gets updated without taking > > > the busy_factor into account when the CPU is about to go idle. > > > > > > This patch makes rq->next_balance get updated independently of whether or > > > not we pulled_task. Also, we add logic to ensure that we always traverse > > > at least 1 of the sched domains to get a proper next_balance value for > > > updating rq->next_balance. > > > > > > Additionally, since load_balance() modifies the sd->balance_interval, we > > > need to re-obtain the sched domain's interval after the call to > > > load_balance() in rebalance_domains() before we update rq->next_balance. > > > > > > This patch adds and uses 2 new helper functions, update_next_balance() and > > > get_sd_balance_interval() to update next_balance and obtain the sched > > > domain's balance_interval. > > > > > > Hi Peter, > > > > I noticed that patch 1 is in tip, but not this patch 2. I was wondering > > what the current status with this [PATCH 2/2] is at the moment. > > It was crashing the bootup with the attached config, it gave the splat > attached below. (ignore the line duplication, it's a serial logging > artifact.) Ah okay. I'll take a look at the code some more then. Thanks, Jason ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 2/2] sched: Fix next_balance logic in rebalance_domains() and idle_balance() 2014-05-08 17:38 ` Ingo Molnar 2014-05-08 18:15 ` Jason Low @ 2014-05-08 22:14 ` Jason Low 2014-05-09 0:49 ` Jason Low 1 sibling, 1 reply; 15+ messages in thread From: Jason Low @ 2014-05-08 22:14 UTC (permalink / raw) To: Ingo Molnar, jason.low2 Cc: peterz, linux-kernel, daniel.lezcano, alex.shi, preeti, efault, vincent.guittot, morten.rasmussen, aswin On Thu, 2014-05-08 at 19:38 +0200, Ingo Molnar wrote: > * Jason Low <jason.low2@hp.com> wrote: > > > On Mon, 2014-04-28 at 15:45 -0700, Jason Low wrote: > > > Currently, in idle_balance(), we update rq->next_balance when we pull_tasks. > > > However, it is also important to update this in the !pulled_tasks case too. > > > > > > When the CPU is "busy" (the CPU isn't idle), rq->next_balance gets computed > > > using sd->busy_factor (so we increase the balance interval when the CPU is > > > busy). However, when the CPU goes idle, rq->next_balance could still be set > > > to a large value that was computed with the sd->busy_factor. > > > > > > Thus, we need to also update rq->next_balance in idle_balance() in the cases > > > where !pulled_tasks too, so that rq->next_balance gets updated without taking > > > the busy_factor into account when the CPU is about to go idle. > > > > > > This patch makes rq->next_balance get updated independently of whether or > > > not we pulled_task. Also, we add logic to ensure that we always traverse > > > at least 1 of the sched domains to get a proper next_balance value for > > > updating rq->next_balance. > > > > > > Additionally, since load_balance() modifies the sd->balance_interval, we > > > need to re-obtain the sched domain's interval after the call to > > > load_balance() in rebalance_domains() before we update rq->next_balance. > > > > > > This patch adds and uses 2 new helper functions, update_next_balance() and > > > get_sd_balance_interval() to update next_balance and obtain the sched > > > domain's balance_interval. > > > > > > Hi Peter, > > > > I noticed that patch 1 is in tip, but not this patch 2. I was wondering > > what the current status with this [PATCH 2/2] is at the moment. > > It was crashing the bootup with the attached config, it gave the splat > attached below. (ignore the line duplication, it's a serial logging > artifact.) Hi Ingo, Peter, Were there NULL domains on the test system? If so, I think we can address the problem by doing update_next_balance() only if the below rcu_dereference_check_sched_domain() returns a non-null domain. @@ -6665,8 +6692,14 @@ static int idle_balance(struct rq *this_rq) > */ > this_rq->idle_stamp = rq_clock(this_rq); > > - if (this_rq->avg_idle < sysctl_sched_migration_cost) > + if (this_rq->avg_idle < sysctl_sched_migration_cost) { > + rcu_read_lock(); > + sd = rcu_dereference_check_sched_domain(this_rq->sd); > + update_next_balance(sd, 0, &next_balance); > + rcu_read_unlock(); > + > goto out; > + } ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 2/2] sched: Fix next_balance logic in rebalance_domains() and idle_balance() 2014-05-08 22:14 ` Jason Low @ 2014-05-09 0:49 ` Jason Low 2014-05-09 9:08 ` Peter Zijlstra ` (2 more replies) 0 siblings, 3 replies; 15+ messages in thread From: Jason Low @ 2014-05-09 0:49 UTC (permalink / raw) To: Ingo Molnar, Jason Low Cc: peterz, linux-kernel, daniel.lezcano, alex.shi, preeti, efault, vincent.guittot, morten.rasmussen, aswin On Thu, 2014-05-08 at 15:14 -0700, Jason Low wrote: > Hi Ingo, Peter, > > Were there NULL domains on the test system? If so, I think we can > address the problem by doing update_next_balance() only if the below > rcu_dereference_check_sched_domain() returns a non-null domain. Also, below is a patch which has the change: --- Subject: [PATCH v2] sched: Fix next_balance logic in rebalance_domains() v1->v2: - Address a potential null pointer dereference. Currently, in idle_balance(), we update rq->next_balance when we pull_tasks. However, it is also important to update this in the !pulled_tasks case too. When the CPU is "busy" (the CPU isn't idle), rq->next_balance gets computed using sd->busy_factor (so we increase the balance interval when the CPU is busy). However, when the CPU goes idle, rq->next_balance could still be set to a large value that was computed with the sd->busy_factor. Thus, we need to also update rq->next_balance in idle_balance() in the cases where !pulled_tasks too, so that rq->next_balance gets updated without taking the busy_factor into account when the CPU is about to go idle. This patch makes rq->next_balance get updated independently of whether or not we pulled_task. Also, we add logic to ensure that we always traverse at least 1 of the sched domains to get a proper next_balance value for updating rq->next_balance. Additionally, since load_balance() modifies the sd->balance_interval, we need to re-obtain the sched domain's interval after the call to load_balance() in rebalance_domains() before we update rq->next_balance. This patch adds and uses 2 new helper functions, update_next_balance() and get_sd_balance_interval() to update next_balance and obtain the sched domain's balance_interval. Cc: daniel.lezcano@linaro.org Cc: alex.shi@linaro.org Cc: preeti@linux.vnet.ibm.com Cc: efault@gmx.de Cc: vincent.guittot@linaro.org Cc: morten.rasmussen@arm.com Cc: aswin@hp.com Cc: mingo@kernel.org Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Signed-off-by: Jason Low <jason.low2@hp.com> --- kernel/sched/fair.c | 69 ++++++++++++++++++++++++++++++++++----------------- 1 files changed, 46 insertions(+), 23 deletions(-) diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index 28ccf50..57b7390 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -6669,17 +6669,44 @@ out: return ld_moved; } +static inline unsigned long +get_sd_balance_interval(struct sched_domain *sd, int cpu_busy) +{ + unsigned long interval = sd->balance_interval; + + if (cpu_busy) + interval *= sd->busy_factor; + + /* scale ms to jiffies */ + interval = msecs_to_jiffies(interval); + interval = clamp(interval, 1UL, max_load_balance_interval); + + return interval; +} + +static inline void +update_next_balance(struct sched_domain *sd, int cpu_busy, unsigned long *next_balance) +{ + unsigned long interval, next; + + interval = get_sd_balance_interval(sd, cpu_busy); + next = sd->last_balance + interval; + + if (time_after(*next_balance, next)) + *next_balance = next; +} + /* * idle_balance is called by schedule() if this_cpu is about to become * idle. Attempts to pull tasks from other CPUs. */ static int idle_balance(struct rq *this_rq) { + unsigned long next_balance = jiffies + HZ; + int this_cpu = this_rq->cpu; struct sched_domain *sd; int pulled_task = 0; - unsigned long next_balance = jiffies + HZ; u64 curr_cost = 0; - int this_cpu = this_rq->cpu; idle_enter_fair(this_rq); @@ -6689,8 +6716,15 @@ static int idle_balance(struct rq *this_rq) */ this_rq->idle_stamp = rq_clock(this_rq); - if (this_rq->avg_idle < sysctl_sched_migration_cost) + if (this_rq->avg_idle < sysctl_sched_migration_cost) { + rcu_read_lock(); + sd = rcu_dereference_check_sched_domain(this_rq->sd); + if (sd) + update_next_balance(sd, 0, &next_balance); + rcu_read_unlock(); + goto out; + } /* * Drop the rq->lock, but keep IRQ/preempt disabled. @@ -6700,15 +6734,16 @@ static int idle_balance(struct rq *this_rq) update_blocked_averages(this_cpu); rcu_read_lock(); for_each_domain(this_cpu, sd) { - unsigned long interval; int continue_balancing = 1; u64 t0, domain_cost; if (!(sd->flags & SD_LOAD_BALANCE)) continue; - if (this_rq->avg_idle < curr_cost + sd->max_newidle_lb_cost) + if (this_rq->avg_idle < curr_cost + sd->max_newidle_lb_cost) { + update_next_balance(sd, 0, &next_balance); break; + } if (sd->flags & SD_BALANCE_NEWIDLE) { t0 = sched_clock_cpu(this_cpu); @@ -6724,9 +6759,7 @@ static int idle_balance(struct rq *this_rq) curr_cost += domain_cost; } - interval = msecs_to_jiffies(sd->balance_interval); - if (time_after(next_balance, sd->last_balance + interval)) - next_balance = sd->last_balance + interval; + update_next_balance(sd, 0, &next_balance); /* * Stop searching for tasks to pull if there are @@ -6750,15 +6783,11 @@ static int idle_balance(struct rq *this_rq) if (this_rq->cfs.h_nr_running && !pulled_task) pulled_task = 1; - if (pulled_task || time_after(jiffies, this_rq->next_balance)) { - /* - * We are going idle. next_balance may be set based on - * a busy processor. So reset next_balance. - */ +out: + /* Move the next balance forward */ + if (time_after(this_rq->next_balance, next_balance)) this_rq->next_balance = next_balance; - } -out: /* Is there a task of a high priority class? */ if (this_rq->nr_running != this_rq->cfs.h_nr_running) pulled_task = -1; @@ -7041,16 +7070,9 @@ static void rebalance_domains(struct rq *rq, enum cpu_idle_type idle) break; } - interval = sd->balance_interval; - if (idle != CPU_IDLE) - interval *= sd->busy_factor; - - /* scale ms to jiffies */ - interval = msecs_to_jiffies(interval); - interval = clamp(interval, 1UL, max_load_balance_interval); + interval = get_sd_balance_interval(sd, idle != CPU_IDLE); need_serialize = sd->flags & SD_SERIALIZE; - if (need_serialize) { if (!spin_trylock(&balancing)) goto out; @@ -7066,6 +7088,7 @@ static void rebalance_domains(struct rq *rq, enum cpu_idle_type idle) idle = idle_cpu(cpu) ? CPU_IDLE : CPU_NOT_IDLE; } sd->last_balance = jiffies; + interval = get_sd_balance_interval(sd, idle != CPU_IDLE); } if (need_serialize) spin_unlock(&balancing); -- 1.7.1 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [PATCH 2/2] sched: Fix next_balance logic in rebalance_domains() and idle_balance() 2014-05-09 0:49 ` Jason Low @ 2014-05-09 9:08 ` Peter Zijlstra 2014-05-09 17:29 ` Jason Low 2014-05-19 13:09 ` [tip:sched/core] " tip-bot for Jason Low 2014-05-22 12:27 ` [tip:sched/core] sched: Fix the rq-> " tip-bot for Jason Low 2 siblings, 1 reply; 15+ messages in thread From: Peter Zijlstra @ 2014-05-09 9:08 UTC (permalink / raw) To: Jason Low Cc: Ingo Molnar, linux-kernel, daniel.lezcano, alex.shi, preeti, efault, vincent.guittot, morten.rasmussen, aswin [-- Attachment #1: Type: text/plain, Size: 525 bytes --] On Thu, May 08, 2014 at 05:49:22PM -0700, Jason Low wrote: > On Thu, 2014-05-08 at 15:14 -0700, Jason Low wrote: > > Hi Ingo, Peter, > > > > Were there NULL domains on the test system? If so, I think we can > > address the problem by doing update_next_balance() only if the below > > rcu_dereference_check_sched_domain() returns a non-null domain. > > Also, below is a patch which has the change: > Thanks, and yes, NULL domains are a perfectly normal thing to have (though not common on normal boot paths). [-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --] ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 2/2] sched: Fix next_balance logic in rebalance_domains() and idle_balance() 2014-05-09 9:08 ` Peter Zijlstra @ 2014-05-09 17:29 ` Jason Low 0 siblings, 0 replies; 15+ messages in thread From: Jason Low @ 2014-05-09 17:29 UTC (permalink / raw) To: Peter Zijlstra Cc: Ingo Molnar, linux-kernel, daniel.lezcano, alex.shi, preeti, efault, vincent.guittot, morten.rasmussen, aswin, jason.low2 On Fri, 2014-05-09 at 11:08 +0200, Peter Zijlstra wrote: > On Thu, May 08, 2014 at 05:49:22PM -0700, Jason Low wrote: > > On Thu, 2014-05-08 at 15:14 -0700, Jason Low wrote: > > > Hi Ingo, Peter, > > > > > > Were there NULL domains on the test system? If so, I think we can > > > address the problem by doing update_next_balance() only if the below > > > rcu_dereference_check_sched_domain() returns a non-null domain. > > > > Also, below is a patch which has the change: > > > > Thanks, and yes, NULL domains are a perfectly normal thing to have > (though not common on normal boot paths). Okay. Likewise, on my test machine, I offline all but 1 CPU in order to try reproducing the issue. Thanks, Jason ^ permalink raw reply [flat|nested] 15+ messages in thread
* [tip:sched/core] sched: Fix next_balance logic in rebalance_domains() and idle_balance() 2014-05-09 0:49 ` Jason Low 2014-05-09 9:08 ` Peter Zijlstra @ 2014-05-19 13:09 ` tip-bot for Jason Low 2014-05-22 12:27 ` [tip:sched/core] sched: Fix the rq-> " tip-bot for Jason Low 2 siblings, 0 replies; 15+ messages in thread From: tip-bot for Jason Low @ 2014-05-19 13:09 UTC (permalink / raw) To: linux-tip-commits Cc: linux-kernel, hpa, mingo, preeti, peterz, jason.low2, tglx Commit-ID: df6b728416e32fe7fe04e5c81ca9ca2d6416735a Gitweb: http://git.kernel.org/tip/df6b728416e32fe7fe04e5c81ca9ca2d6416735a Author: Jason Low <jason.low2@hp.com> AuthorDate: Thu, 8 May 2014 17:49:22 -0700 Committer: Thomas Gleixner <tglx@linutronix.de> CommitDate: Mon, 19 May 2014 22:02:41 +0900 sched: Fix next_balance logic in rebalance_domains() and idle_balance() Currently, in idle_balance(), we update rq->next_balance when we pull_tasks. However, it is also important to update this in the !pulled_tasks case too. When the CPU is "busy" (the CPU isn't idle), rq->next_balance gets computed using sd->busy_factor (so we increase the balance interval when the CPU is busy). However, when the CPU goes idle, rq->next_balance could still be set to a large value that was computed with the sd->busy_factor. Thus, we need to also update rq->next_balance in idle_balance() in the cases where !pulled_tasks too, so that rq->next_balance gets updated without taking the busy_factor into account when the CPU is about to go idle. This patch makes rq->next_balance get updated independently of whether or not we pulled_task. Also, we add logic to ensure that we always traverse at least 1 of the sched domains to get a proper next_balance value for updating rq->next_balance. Additionally, since load_balance() modifies the sd->balance_interval, we need to re-obtain the sched domain's interval after the call to load_balance() in rebalance_domains() before we update rq->next_balance. This patch adds and uses 2 new helper functions, update_next_balance() and get_sd_balance_interval() to update next_balance and obtain the sched domain's balance_interval. Cc: daniel.lezcano@linaro.org Cc: alex.shi@linaro.org Cc: efault@gmx.de Cc: vincent.guittot@linaro.org Cc: morten.rasmussen@arm.com Cc: aswin@hp.com Cc: Ingo Molnar <mingo@kernel.org> Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Signed-off-by: Jason Low <jason.low2@hp.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1399596562.2200.7.camel@j-VirtualBox Signed-off-by: Thomas Gleixner <tglx@linutronix.de> --- kernel/sched/fair.c | 69 +++++++++++++++++++++++++++++++++++------------------ 1 file changed, 46 insertions(+), 23 deletions(-) diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index 429164d..26ec668 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -6672,17 +6672,44 @@ out: return ld_moved; } +static inline unsigned long +get_sd_balance_interval(struct sched_domain *sd, int cpu_busy) +{ + unsigned long interval = sd->balance_interval; + + if (cpu_busy) + interval *= sd->busy_factor; + + /* scale ms to jiffies */ + interval = msecs_to_jiffies(interval); + interval = clamp(interval, 1UL, max_load_balance_interval); + + return interval; +} + +static inline void +update_next_balance(struct sched_domain *sd, int cpu_busy, unsigned long *next_balance) +{ + unsigned long interval, next; + + interval = get_sd_balance_interval(sd, cpu_busy); + next = sd->last_balance + interval; + + if (time_after(*next_balance, next)) + *next_balance = next; +} + /* * idle_balance is called by schedule() if this_cpu is about to become * idle. Attempts to pull tasks from other CPUs. */ static int idle_balance(struct rq *this_rq) { + unsigned long next_balance = jiffies + HZ; + int this_cpu = this_rq->cpu; struct sched_domain *sd; int pulled_task = 0; - unsigned long next_balance = jiffies + HZ; u64 curr_cost = 0; - int this_cpu = this_rq->cpu; idle_enter_fair(this_rq); @@ -6692,8 +6719,15 @@ static int idle_balance(struct rq *this_rq) */ this_rq->idle_stamp = rq_clock(this_rq); - if (this_rq->avg_idle < sysctl_sched_migration_cost) + if (this_rq->avg_idle < sysctl_sched_migration_cost) { + rcu_read_lock(); + sd = rcu_dereference_check_sched_domain(this_rq->sd); + if (sd) + update_next_balance(sd, 0, &next_balance); + rcu_read_unlock(); + goto out; + } /* * Drop the rq->lock, but keep IRQ/preempt disabled. @@ -6703,15 +6737,16 @@ static int idle_balance(struct rq *this_rq) update_blocked_averages(this_cpu); rcu_read_lock(); for_each_domain(this_cpu, sd) { - unsigned long interval; int continue_balancing = 1; u64 t0, domain_cost; if (!(sd->flags & SD_LOAD_BALANCE)) continue; - if (this_rq->avg_idle < curr_cost + sd->max_newidle_lb_cost) + if (this_rq->avg_idle < curr_cost + sd->max_newidle_lb_cost) { + update_next_balance(sd, 0, &next_balance); break; + } if (sd->flags & SD_BALANCE_NEWIDLE) { t0 = sched_clock_cpu(this_cpu); @@ -6727,9 +6762,7 @@ static int idle_balance(struct rq *this_rq) curr_cost += domain_cost; } - interval = msecs_to_jiffies(sd->balance_interval); - if (time_after(next_balance, sd->last_balance + interval)) - next_balance = sd->last_balance + interval; + update_next_balance(sd, 0, &next_balance); /* * Stop searching for tasks to pull if there are @@ -6753,15 +6786,11 @@ static int idle_balance(struct rq *this_rq) if (this_rq->cfs.h_nr_running && !pulled_task) pulled_task = 1; - if (pulled_task || time_after(jiffies, this_rq->next_balance)) { - /* - * We are going idle. next_balance may be set based on - * a busy processor. So reset next_balance. - */ +out: + /* Move the next balance forward */ + if (time_after(this_rq->next_balance, next_balance)) this_rq->next_balance = next_balance; - } -out: /* Is there a task of a high priority class? */ if (this_rq->nr_running != this_rq->cfs.h_nr_running) pulled_task = -1; @@ -7044,16 +7073,9 @@ static void rebalance_domains(struct rq *rq, enum cpu_idle_type idle) break; } - interval = sd->balance_interval; - if (idle != CPU_IDLE) - interval *= sd->busy_factor; - - /* scale ms to jiffies */ - interval = msecs_to_jiffies(interval); - interval = clamp(interval, 1UL, max_load_balance_interval); + interval = get_sd_balance_interval(sd, idle != CPU_IDLE); need_serialize = sd->flags & SD_SERIALIZE; - if (need_serialize) { if (!spin_trylock(&balancing)) goto out; @@ -7069,6 +7091,7 @@ static void rebalance_domains(struct rq *rq, enum cpu_idle_type idle) idle = idle_cpu(cpu) ? CPU_IDLE : CPU_NOT_IDLE; } sd->last_balance = jiffies; + interval = get_sd_balance_interval(sd, idle != CPU_IDLE); } if (need_serialize) spin_unlock(&balancing); ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [tip:sched/core] sched: Fix the rq-> next_balance logic in rebalance_domains() and idle_balance() 2014-05-09 0:49 ` Jason Low 2014-05-09 9:08 ` Peter Zijlstra 2014-05-19 13:09 ` [tip:sched/core] " tip-bot for Jason Low @ 2014-05-22 12:27 ` tip-bot for Jason Low 2 siblings, 0 replies; 15+ messages in thread From: tip-bot for Jason Low @ 2014-05-22 12:27 UTC (permalink / raw) To: linux-tip-commits Cc: linux-kernel, hpa, mingo, preeti, peterz, jason.low2, tglx Commit-ID: 52a08ef1f13a11289c9e18cd4cfb4e51c024058b Gitweb: http://git.kernel.org/tip/52a08ef1f13a11289c9e18cd4cfb4e51c024058b Author: Jason Low <jason.low2@hp.com> AuthorDate: Thu, 8 May 2014 17:49:22 -0700 Committer: Ingo Molnar <mingo@kernel.org> CommitDate: Thu, 22 May 2014 11:16:32 +0200 sched: Fix the rq->next_balance logic in rebalance_domains() and idle_balance() Currently, in idle_balance(), we update rq->next_balance when we pull_tasks. However, it is also important to update this in the !pulled_tasks case too. When the CPU is "busy" (the CPU isn't idle), rq->next_balance gets computed using sd->busy_factor (so we increase the balance interval when the CPU is busy). However, when the CPU goes idle, rq->next_balance could still be set to a large value that was computed with the sd->busy_factor. Thus, we need to also update rq->next_balance in idle_balance() in the cases where !pulled_tasks too, so that rq->next_balance gets updated without taking the busy_factor into account when the CPU is about to go idle. This patch makes rq->next_balance get updated independently of whether or not we pulled_task. Also, we add logic to ensure that we always traverse at least 1 of the sched domains to get a proper next_balance value for updating rq->next_balance. Additionally, since load_balance() modifies the sd->balance_interval, we need to re-obtain the sched domain's interval after the call to load_balance() in rebalance_domains() before we update rq->next_balance. This patch adds and uses 2 new helper functions, update_next_balance() and get_sd_balance_interval() to update next_balance and obtain the sched domain's balance_interval. Signed-off-by: Jason Low <jason.low2@hp.com> Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: daniel.lezcano@linaro.org Cc: alex.shi@linaro.org Cc: efault@gmx.de Cc: vincent.guittot@linaro.org Cc: morten.rasmussen@arm.com Cc: aswin@hp.com Link: http://lkml.kernel.org/r/1399596562.2200.7.camel@j-VirtualBox Signed-off-by: Ingo Molnar <mingo@kernel.org> --- kernel/sched/fair.c | 69 +++++++++++++++++++++++++++++++++++------------------ 1 file changed, 46 insertions(+), 23 deletions(-) diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index 429164d..26ec668 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -6672,17 +6672,44 @@ out: return ld_moved; } +static inline unsigned long +get_sd_balance_interval(struct sched_domain *sd, int cpu_busy) +{ + unsigned long interval = sd->balance_interval; + + if (cpu_busy) + interval *= sd->busy_factor; + + /* scale ms to jiffies */ + interval = msecs_to_jiffies(interval); + interval = clamp(interval, 1UL, max_load_balance_interval); + + return interval; +} + +static inline void +update_next_balance(struct sched_domain *sd, int cpu_busy, unsigned long *next_balance) +{ + unsigned long interval, next; + + interval = get_sd_balance_interval(sd, cpu_busy); + next = sd->last_balance + interval; + + if (time_after(*next_balance, next)) + *next_balance = next; +} + /* * idle_balance is called by schedule() if this_cpu is about to become * idle. Attempts to pull tasks from other CPUs. */ static int idle_balance(struct rq *this_rq) { + unsigned long next_balance = jiffies + HZ; + int this_cpu = this_rq->cpu; struct sched_domain *sd; int pulled_task = 0; - unsigned long next_balance = jiffies + HZ; u64 curr_cost = 0; - int this_cpu = this_rq->cpu; idle_enter_fair(this_rq); @@ -6692,8 +6719,15 @@ static int idle_balance(struct rq *this_rq) */ this_rq->idle_stamp = rq_clock(this_rq); - if (this_rq->avg_idle < sysctl_sched_migration_cost) + if (this_rq->avg_idle < sysctl_sched_migration_cost) { + rcu_read_lock(); + sd = rcu_dereference_check_sched_domain(this_rq->sd); + if (sd) + update_next_balance(sd, 0, &next_balance); + rcu_read_unlock(); + goto out; + } /* * Drop the rq->lock, but keep IRQ/preempt disabled. @@ -6703,15 +6737,16 @@ static int idle_balance(struct rq *this_rq) update_blocked_averages(this_cpu); rcu_read_lock(); for_each_domain(this_cpu, sd) { - unsigned long interval; int continue_balancing = 1; u64 t0, domain_cost; if (!(sd->flags & SD_LOAD_BALANCE)) continue; - if (this_rq->avg_idle < curr_cost + sd->max_newidle_lb_cost) + if (this_rq->avg_idle < curr_cost + sd->max_newidle_lb_cost) { + update_next_balance(sd, 0, &next_balance); break; + } if (sd->flags & SD_BALANCE_NEWIDLE) { t0 = sched_clock_cpu(this_cpu); @@ -6727,9 +6762,7 @@ static int idle_balance(struct rq *this_rq) curr_cost += domain_cost; } - interval = msecs_to_jiffies(sd->balance_interval); - if (time_after(next_balance, sd->last_balance + interval)) - next_balance = sd->last_balance + interval; + update_next_balance(sd, 0, &next_balance); /* * Stop searching for tasks to pull if there are @@ -6753,15 +6786,11 @@ static int idle_balance(struct rq *this_rq) if (this_rq->cfs.h_nr_running && !pulled_task) pulled_task = 1; - if (pulled_task || time_after(jiffies, this_rq->next_balance)) { - /* - * We are going idle. next_balance may be set based on - * a busy processor. So reset next_balance. - */ +out: + /* Move the next balance forward */ + if (time_after(this_rq->next_balance, next_balance)) this_rq->next_balance = next_balance; - } -out: /* Is there a task of a high priority class? */ if (this_rq->nr_running != this_rq->cfs.h_nr_running) pulled_task = -1; @@ -7044,16 +7073,9 @@ static void rebalance_domains(struct rq *rq, enum cpu_idle_type idle) break; } - interval = sd->balance_interval; - if (idle != CPU_IDLE) - interval *= sd->busy_factor; - - /* scale ms to jiffies */ - interval = msecs_to_jiffies(interval); - interval = clamp(interval, 1UL, max_load_balance_interval); + interval = get_sd_balance_interval(sd, idle != CPU_IDLE); need_serialize = sd->flags & SD_SERIALIZE; - if (need_serialize) { if (!spin_trylock(&balancing)) goto out; @@ -7069,6 +7091,7 @@ static void rebalance_domains(struct rq *rq, enum cpu_idle_type idle) idle = idle_cpu(cpu) ? CPU_IDLE : CPU_NOT_IDLE; } sd->last_balance = jiffies; + interval = get_sd_balance_interval(sd, idle != CPU_IDLE); } if (need_serialize) spin_unlock(&balancing); ^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [PATCH 2/2] sched: Fix next_balance logic in rebalance_domains() and idle_balance() 2014-05-08 16:59 ` Jason Low 2014-05-08 17:38 ` Ingo Molnar @ 2014-05-08 18:06 ` Peter Zijlstra 1 sibling, 0 replies; 15+ messages in thread From: Peter Zijlstra @ 2014-05-08 18:06 UTC (permalink / raw) To: Jason Low Cc: mingo, linux-kernel, daniel.lezcano, alex.shi, preeti, efault, vincent.guittot, morten.rasmussen, aswin On Thu, May 08, 2014 at 09:59:24AM -0700, Jason Low wrote: > On Mon, 2014-04-28 at 15:45 -0700, Jason Low wrote: > > Currently, in idle_balance(), we update rq->next_balance when we pull_tasks. > > However, it is also important to update this in the !pulled_tasks case too. > > > > When the CPU is "busy" (the CPU isn't idle), rq->next_balance gets computed > > using sd->busy_factor (so we increase the balance interval when the CPU is > > busy). However, when the CPU goes idle, rq->next_balance could still be set > > to a large value that was computed with the sd->busy_factor. > > > > Thus, we need to also update rq->next_balance in idle_balance() in the cases > > where !pulled_tasks too, so that rq->next_balance gets updated without taking > > the busy_factor into account when the CPU is about to go idle. > > > > This patch makes rq->next_balance get updated independently of whether or > > not we pulled_task. Also, we add logic to ensure that we always traverse > > at least 1 of the sched domains to get a proper next_balance value for > > updating rq->next_balance. > > > > Additionally, since load_balance() modifies the sd->balance_interval, we > > need to re-obtain the sched domain's interval after the call to > > load_balance() in rebalance_domains() before we update rq->next_balance. > > > > This patch adds and uses 2 new helper functions, update_next_balance() and > > get_sd_balance_interval() to update next_balance and obtain the sched > > domain's balance_interval. > > > Hi Peter, > > I noticed that patch 1 is in tip, but not this patch 2. I was wondering > what the current status with this [PATCH 2/2] is at the moment. That made a particular .config explode, need to look at it. ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 0/2] sched: Idle load balance fixes 2014-04-28 22:45 [PATCH 0/2] sched: Idle load balance fixes Jason Low 2014-04-28 22:45 ` [PATCH 1/2] sched: Fix updating rq->max_idle_balance_cost and rq->next_balance in idle_balance() Jason Low 2014-04-28 22:45 ` [PATCH 2/2] sched: Fix next_balance logic in rebalance_domains() and idle_balance() Jason Low @ 2014-04-30 7:54 ` Peter Zijlstra 2 siblings, 0 replies; 15+ messages in thread From: Peter Zijlstra @ 2014-04-30 7:54 UTC (permalink / raw) To: Jason Low Cc: mingo, linux-kernel, daniel.lezcano, alex.shi, preeti, efault, vincent.guittot, morten.rasmussen, aswin Thanks! ^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2014-05-22 12:29 UTC | newest] Thread overview: 15+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2014-04-28 22:45 [PATCH 0/2] sched: Idle load balance fixes Jason Low 2014-04-28 22:45 ` [PATCH 1/2] sched: Fix updating rq->max_idle_balance_cost and rq->next_balance in idle_balance() Jason Low 2014-05-08 10:42 ` [tip:sched/core] sched: Fix updating rq-> max_idle_balance_cost " tip-bot for Jason Low 2014-04-28 22:45 ` [PATCH 2/2] sched: Fix next_balance logic in rebalance_domains() and idle_balance() Jason Low 2014-05-08 16:59 ` Jason Low 2014-05-08 17:38 ` Ingo Molnar 2014-05-08 18:15 ` Jason Low 2014-05-08 22:14 ` Jason Low 2014-05-09 0:49 ` Jason Low 2014-05-09 9:08 ` Peter Zijlstra 2014-05-09 17:29 ` Jason Low 2014-05-19 13:09 ` [tip:sched/core] " tip-bot for Jason Low 2014-05-22 12:27 ` [tip:sched/core] sched: Fix the rq-> " tip-bot for Jason Low 2014-05-08 18:06 ` [PATCH 2/2] sched: Fix " Peter Zijlstra 2014-04-30 7:54 ` [PATCH 0/2] sched: Idle load balance fixes Peter Zijlstra
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox