From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753237AbaETLmH (ORCPT ); Tue, 20 May 2014 07:42:07 -0400 Received: from cpsmtpb-ews01.kpnxchange.com ([213.75.39.4]:58208 "EHLO cpsmtpb-ews01.kpnxchange.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751161AbaETLmF (ORCPT ); Tue, 20 May 2014 07:42:05 -0400 Message-ID: <1400586123.4912.40.camel@x220> Subject: [PATCH] MIPS: PNX833x: remove checks for CONFIG_I2C_PNX0105 From: Paul Bolle To: Ralf Baechle Cc: linux-mips@linux-mips.org, linux-kernel@vger.kernel.org Date: Tue, 20 May 2014 13:42:03 +0200 Content-Type: text/plain; charset="UTF-8" X-Mailer: Evolution 3.10.4 (3.10.4-2.fc20) Mime-Version: 1.0 Content-Transfer-Encoding: 7bit X-OriginalArrivalTime: 20 May 2014 11:42:03.0884 (UTC) FILETIME=[85289AC0:01CF7420] X-RcptDomain: vger.kernel.org Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Checks for CONFIG_I2C_PNX0105 were added in v2.6.28. But the related Kconfig symbol has not been added to the tree. Remove these checks. Signed-off-by: Paul Bolle --- Untested. Note that there's no i2c-pnx0105.h in the tree. arch/mips/pnx833x/common/platform.c | 73 ------------------------------------- 1 file changed, 73 deletions(-) diff --git a/arch/mips/pnx833x/common/platform.c b/arch/mips/pnx833x/common/platform.c index 2b7e837dc2e2..b4b774bc3178 100644 --- a/arch/mips/pnx833x/common/platform.c +++ b/arch/mips/pnx833x/common/platform.c @@ -33,11 +33,6 @@ #include #include -#ifdef CONFIG_I2C_PNX0105 -/* Until i2c driver available in kernel.*/ -#include -#endif - #include #include #include @@ -134,70 +129,6 @@ static struct platform_device pnx833x_usb_ehci_device = { .resource = pnx833x_usb_ehci_resources, }; -#ifdef CONFIG_I2C_PNX0105 -static struct resource pnx833x_i2c0_resources[] = { - { - .start = PNX833X_I2C0_PORTS_START, - .end = PNX833X_I2C0_PORTS_END, - .flags = IORESOURCE_MEM, - }, - { - .start = PNX833X_PIC_I2C0_INT, - .end = PNX833X_PIC_I2C0_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource pnx833x_i2c1_resources[] = { - { - .start = PNX833X_I2C1_PORTS_START, - .end = PNX833X_I2C1_PORTS_END, - .flags = IORESOURCE_MEM, - }, - { - .start = PNX833X_PIC_I2C1_INT, - .end = PNX833X_PIC_I2C1_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct i2c_pnx0105_dev pnx833x_i2c_dev[] = { - { - .base = PNX833X_I2C0_PORTS_START, - .irq = -1, /* should be PNX833X_PIC_I2C0_INT but polling is faster */ - .clock = 6, /* 0 == 400 kHz, 4 == 100 kHz(Maximum HDMI), 6 = 50kHz(Preferred HDCP) */ - .bus_addr = 0, /* no slave support */ - }, - { - .base = PNX833X_I2C1_PORTS_START, - .irq = -1, /* on high freq, polling is faster */ - /*.irq = PNX833X_PIC_I2C1_INT,*/ - .clock = 4, /* 0 == 400 kHz, 4 == 100 kHz. 100 kHz seems a safe default for now */ - .bus_addr = 0, /* no slave support */ - }, -}; - -static struct platform_device pnx833x_i2c0_device = { - .name = "i2c-pnx0105", - .id = 0, - .dev = { - .platform_data = &pnx833x_i2c_dev[0], - }, - .num_resources = ARRAY_SIZE(pnx833x_i2c0_resources), - .resource = pnx833x_i2c0_resources, -}; - -static struct platform_device pnx833x_i2c1_device = { - .name = "i2c-pnx0105", - .id = 1, - .dev = { - .platform_data = &pnx833x_i2c_dev[1], - }, - .num_resources = ARRAY_SIZE(pnx833x_i2c1_resources), - .resource = pnx833x_i2c1_resources, -}; -#endif - static u64 ethernet_dmamask = DMA_BIT_MASK(32); static struct resource pnx833x_ethernet_resources[] = { @@ -294,10 +225,6 @@ static struct platform_device pnx833x_flash_nand = { static struct platform_device *pnx833x_platform_devices[] __initdata = { &pnx833x_uart_device, &pnx833x_usb_ehci_device, -#ifdef CONFIG_I2C_PNX0105 - &pnx833x_i2c0_device, - &pnx833x_i2c1_device, -#endif &pnx833x_ethernet_device, &pnx833x_sata_device, &pnx833x_flash_nand, -- 1.9.0