From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932167AbaFBWpn (ORCPT ); Mon, 2 Jun 2014 18:45:43 -0400 Received: from mail-ig0-f171.google.com ([209.85.213.171]:49009 "EHLO mail-ig0-f171.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753137AbaFBWpC (ORCPT ); Mon, 2 Jun 2014 18:45:02 -0400 From: Alex Elder To: mturquette@linaro.org, mporter@linaro.org, bcm@fixthebug.org Cc: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH v5 6/7] clk: bcm281xx: define a bus clock Date: Mon, 2 Jun 2014 17:44:57 -0500 Message-Id: <1401749098-10185-7-git-send-email-elder@linaro.org> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1401749098-10185-1-git-send-email-elder@linaro.org> References: <1401749098-10185-1-git-send-email-elder@linaro.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Define the bus clock "bsc3_apb". This bus clock has to be managed using the CCU policy mechanism, so add the definitions required for that to the clock and its CCU. This one bus clock in particular is defined because it is needed by peripheral clock "bsc3". Our boot loader does not properly activate "bsc3_apb", and as a result, "bsc3" isn't able to function properly. With "bsc3_apb" specified as a prerequisite clock for "bsc3", the latter works correctly. For now only this one bus clock is defined, because it allows correct operation of "bsc3". Others can be added later as needed (and this patch serves to show how that's done). Signed-off-by: Alex Elder --- drivers/clk/bcm/clk-bcm281xx.c | 13 ++++++++++++- include/dt-bindings/clock/bcm281xx.h | 3 ++- 2 files changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/clk/bcm/clk-bcm281xx.c b/drivers/clk/bcm/clk-bcm281xx.c index 502a487..b937fc9 100644 --- a/drivers/clk/bcm/clk-bcm281xx.c +++ b/drivers/clk/bcm/clk-bcm281xx.c @@ -309,8 +309,17 @@ static struct peri_clk_data pwm_data = { .trig = TRIGGER(0x0afc, 15), }; +static struct bus_clk_data bsc3_apb_data = { + .policy = POLICY(0x0048, 4), + .gate = HW_SW_GATE(0x0484, 16, 0, 1), +}; + static struct ccu_data slave_ccu_data = { BCM281XX_CCU_COMMON(slave, SLAVE), + .policy = { + .enable = CCU_LVM_EN(0x0034, 0), + .control = CCU_POLICY_CTL(0x000c, 0, 1, 2), + }, .kona_clks = { [BCM281XX_SLAVE_CCU_UARTB] = KONA_CLK(slave, uartb, peri), @@ -329,9 +338,11 @@ static struct ccu_data slave_ccu_data = { [BCM281XX_SLAVE_CCU_BSC2] = KONA_CLK(slave, bsc2, peri), [BCM281XX_SLAVE_CCU_BSC3] = - KONA_CLK(slave, bsc3, peri), + KONA_CLK_PREREQ(slave, bsc3, peri, bsc3_apb), [BCM281XX_SLAVE_CCU_PWM] = KONA_CLK(slave, pwm, peri), + [BCM281XX_SLAVE_CCU_BSC3_APB] = + KONA_CLK(slave, bsc3_apb, bus), [BCM281XX_SLAVE_CCU_CLOCK_COUNT] = LAST_KONA_CLK, }, }; diff --git a/include/dt-bindings/clock/bcm281xx.h b/include/dt-bindings/clock/bcm281xx.h index a763460..99f4aad 100644 --- a/include/dt-bindings/clock/bcm281xx.h +++ b/include/dt-bindings/clock/bcm281xx.h @@ -72,6 +72,7 @@ #define BCM281XX_SLAVE_CCU_BSC2 7 #define BCM281XX_SLAVE_CCU_BSC3 8 #define BCM281XX_SLAVE_CCU_PWM 9 -#define BCM281XX_SLAVE_CCU_CLOCK_COUNT 10 +#define BCM281XX_SLAVE_CCU_BSC3_APB 10 +#define BCM281XX_SLAVE_CCU_CLOCK_COUNT 11 #endif /* _CLOCK_BCM281XX_H */ -- 1.9.1