From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
To: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Cc: Lee Jones <lee.jones@linaro.org>,
Samuel Ortiz <sameo@linux.intel.com>,
Mark Brown <broonie@kernel.org>,
Mike Turquette <mturquette@linaro.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Alessandro Zummo <a.zummo@towertech.it>,
Kukjin Kim <kgene.kim@samsung.com>,
Doug Anderson <dianders@chromium.org>,
Olof Johansson <olof@lixom.net>,
Sjoerd Simons <sjoerd.simons@collabora.co.uk>,
Daniel Stone <daniels@collabora.com>,
Tomeu Vizoso <tomeu.vizoso@collabora.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 06/14] clk: max77686: Convert to the generic max clock driver
Date: Wed, 25 Jun 2014 16:30:08 +0200 [thread overview]
Message-ID: <1403706608.22107.24.camel@AMDC1943> (raw)
In-Reply-To: <1403202040-12641-7-git-send-email-javier.martinez@collabora.co.uk>
On czw, 2014-06-19 at 20:20 +0200, Javier Martinez Canillas wrote:
> Clocks drivers for Maxim PMIC are very similar so they can
> be converted to use the generic Maxim clock driver.
>
> Also, while being there use module_platform_driver() helper
> macro to eliminate more boilerplate code.
>
> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
> ---
> drivers/clk/Kconfig | 1 +
> drivers/clk/clk-max77686.c | 176 +++------------------------------------------
> 2 files changed, 9 insertions(+), 168 deletions(-)
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Best regards,
Krzysztof
>
> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index 73f78e8..3fd4270 100644
> --- a/drivers/clk/Kconfig
> +++ b/drivers/clk/Kconfig
> @@ -38,6 +38,7 @@ config COMMON_CLK_MAX_GEN
> config COMMON_CLK_MAX77686
> tristate "Clock driver for Maxim 77686 MFD"
> depends on MFD_MAX77686
> + select COMMON_CLK_MAX_GEN
> ---help---
> This driver supports Maxim 77686 crystal oscillator clock.
>
> diff --git a/drivers/clk/clk-max77686.c b/drivers/clk/clk-max77686.c
> index 185b611..ed0beb4 100644
> --- a/drivers/clk/clk-max77686.c
> +++ b/drivers/clk/clk-max77686.c
> @@ -31,187 +31,37 @@
> #include <linux/clkdev.h>
>
> #include <dt-bindings/clock/maxim,max77686.h>
> -
> -struct max77686_clk {
> - struct max77686_dev *iodev;
> - u32 mask;
> - struct clk_hw hw;
> - struct clk_lookup *lookup;
> -};
> -
> -static struct max77686_clk *to_max77686_clk(struct clk_hw *hw)
> -{
> - return container_of(hw, struct max77686_clk, hw);
> -}
> -
> -static int max77686_clk_prepare(struct clk_hw *hw)
> -{
> - struct max77686_clk *max77686 = to_max77686_clk(hw);
> -
> - return regmap_update_bits(max77686->iodev->regmap,
> - MAX77686_REG_32KHZ, max77686->mask,
> - max77686->mask);
> -}
> -
> -static void max77686_clk_unprepare(struct clk_hw *hw)
> -{
> - struct max77686_clk *max77686 = to_max77686_clk(hw);
> -
> - regmap_update_bits(max77686->iodev->regmap,
> - MAX77686_REG_32KHZ, max77686->mask, ~max77686->mask);
> -}
> -
> -static int max77686_clk_is_prepared(struct clk_hw *hw)
> -{
> - struct max77686_clk *max77686 = to_max77686_clk(hw);
> - int ret;
> - u32 val;
> -
> - ret = regmap_read(max77686->iodev->regmap,
> - MAX77686_REG_32KHZ, &val);
> -
> - if (ret < 0)
> - return -EINVAL;
> -
> - return val & max77686->mask;
> -}
> -
> -static unsigned long max77686_recalc_rate(struct clk_hw *hw,
> - unsigned long parent_rate)
> -{
> - return 32768;
> -}
> -
> -static struct clk_ops max77686_clk_ops = {
> - .prepare = max77686_clk_prepare,
> - .unprepare = max77686_clk_unprepare,
> - .is_prepared = max77686_clk_is_prepared,
> - .recalc_rate = max77686_recalc_rate,
> -};
> +#include "clk-max-gen.h"
>
> static struct clk_init_data max77686_clks_init[MAX77686_CLKS_NUM] = {
> [MAX77686_CLK_AP] = {
> .name = "32khz_ap",
> - .ops = &max77686_clk_ops,
> + .ops = &max_gen_clk_ops,
> .flags = CLK_IS_ROOT,
> },
> [MAX77686_CLK_CP] = {
> .name = "32khz_cp",
> - .ops = &max77686_clk_ops,
> + .ops = &max_gen_clk_ops,
> .flags = CLK_IS_ROOT,
> },
> [MAX77686_CLK_PMIC] = {
> .name = "32khz_pmic",
> - .ops = &max77686_clk_ops,
> + .ops = &max_gen_clk_ops,
> .flags = CLK_IS_ROOT,
> },
> };
>
> -static struct clk *max77686_clk_register(struct device *dev,
> - struct max77686_clk *max77686)
> -{
> - struct clk *clk;
> - struct clk_hw *hw = &max77686->hw;
> -
> - clk = clk_register(dev, hw);
> - if (IS_ERR(clk))
> - return clk;
> -
> - max77686->lookup = kzalloc(sizeof(struct clk_lookup), GFP_KERNEL);
> - if (!max77686->lookup)
> - return ERR_PTR(-ENOMEM);
> -
> - max77686->lookup->con_id = hw->init->name;
> - max77686->lookup->clk = clk;
> -
> - clkdev_add(max77686->lookup);
> -
> - return clk;
> -}
> -
> static int max77686_clk_probe(struct platform_device *pdev)
> {
> struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
> - struct max77686_clk *max77686_clks[MAX77686_CLKS_NUM];
> - struct clk **clocks;
> - int i, ret;
> -
> - clocks = devm_kzalloc(&pdev->dev, sizeof(struct clk *)
> - * MAX77686_CLKS_NUM, GFP_KERNEL);
> - if (!clocks)
> - return -ENOMEM;
> -
> - for (i = 0; i < MAX77686_CLKS_NUM; i++) {
> - max77686_clks[i] = devm_kzalloc(&pdev->dev,
> - sizeof(struct max77686_clk), GFP_KERNEL);
> - if (!max77686_clks[i])
> - return -ENOMEM;
> - }
> -
> - for (i = 0; i < MAX77686_CLKS_NUM; i++) {
> - max77686_clks[i]->iodev = iodev;
> - max77686_clks[i]->mask = 1 << i;
> - max77686_clks[i]->hw.init = &max77686_clks_init[i];
> -
> - clocks[i] = max77686_clk_register(&pdev->dev, max77686_clks[i]);
> - if (IS_ERR(clocks[i])) {
> - ret = PTR_ERR(clocks[i]);
> - dev_err(&pdev->dev, "failed to register %s\n",
> - max77686_clks[i]->hw.init->name);
> - goto err_clocks;
> - }
> - }
> -
> - platform_set_drvdata(pdev, clocks);
> -
> - if (iodev->dev->of_node) {
> - struct clk_onecell_data *of_data;
> -
> - of_data = devm_kzalloc(&pdev->dev,
> - sizeof(*of_data), GFP_KERNEL);
> - if (!of_data) {
> - ret = -ENOMEM;
> - goto err_clocks;
> - }
>
> - of_data->clks = clocks;
> - of_data->clk_num = MAX77686_CLKS_NUM;
> - ret = of_clk_add_provider(iodev->dev->of_node,
> - of_clk_src_onecell_get, of_data);
> - if (ret) {
> - dev_err(&pdev->dev, "failed to register OF clock provider\n");
> - goto err_clocks;
> - }
> - }
> -
> - return 0;
> -
> -err_clocks:
> - for (--i; i >= 0; --i) {
> - clkdev_drop(max77686_clks[i]->lookup);
> - clk_unregister(max77686_clks[i]->hw.clk);
> - }
> -
> - return ret;
> + return max_gen_clk_probe(pdev, iodev->regmap, MAX77686_REG_32KHZ,
> + max77686_clks_init, MAX77686_CLKS_NUM);
> }
>
> static int max77686_clk_remove(struct platform_device *pdev)
> {
> - struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
> - struct clk **clocks = platform_get_drvdata(pdev);
> - int i;
> -
> - if (iodev->dev->of_node)
> - of_clk_del_provider(iodev->dev->of_node);
> -
> - for (i = 0; i < MAX77686_CLKS_NUM; i++) {
> - struct clk_hw *hw = __clk_get_hw(clocks[i]);
> - struct max77686_clk *max77686 = to_max77686_clk(hw);
> -
> - clkdev_drop(max77686->lookup);
> - clk_unregister(clocks[i]);
> - }
> - return 0;
> + return max_gen_clk_remove(pdev, MAX77686_CLKS_NUM);
> }
>
> static const struct platform_device_id max77686_clk_id[] = {
> @@ -230,17 +80,7 @@ static struct platform_driver max77686_clk_driver = {
> .id_table = max77686_clk_id,
> };
>
> -static int __init max77686_clk_init(void)
> -{
> - return platform_driver_register(&max77686_clk_driver);
> -}
> -subsys_initcall(max77686_clk_init);
> -
> -static void __init max77686_clk_cleanup(void)
> -{
> - platform_driver_unregister(&max77686_clk_driver);
> -}
> -module_exit(max77686_clk_cleanup);
> +module_platform_driver(max77686_clk_driver);
>
> MODULE_DESCRIPTION("MAXIM 77686 Clock Driver");
> MODULE_AUTHOR("Jonghwa Lee <jonghwa3.lee@samsung.com>");
next prev parent reply other threads:[~2014-06-25 14:30 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-19 18:20 [PATCH v3 00/14] Add Maxim 77802 PMIC support Javier Martinez Canillas
2014-06-19 18:20 ` [PATCH v3 01/14] mfd: max77686: Convert to use regmap_irq Javier Martinez Canillas
2014-06-19 18:20 ` [PATCH v3 02/14] mfd: max77686: Allow the max77686 rtc to wakeup the system Javier Martinez Canillas
2014-06-25 10:05 ` Krzysztof Kozlowski
2014-06-25 10:29 ` Javier Martinez Canillas
2014-06-25 17:24 ` Doug Anderson
2014-06-25 18:11 ` Javier Martinez Canillas
2014-06-19 18:20 ` [PATCH v3 03/14] clk: max77686: Add DT include for MAX77686 PMIC clock Javier Martinez Canillas
2014-06-25 10:18 ` Krzysztof Kozlowski
2014-06-19 18:20 ` [PATCH v3 04/14] clk: max77686: Improve Maxim 77686 PMIC clocks binding Javier Martinez Canillas
2014-06-25 10:19 ` Krzysztof Kozlowski
2014-06-25 18:06 ` Doug Anderson
2014-06-25 18:13 ` Javier Martinez Canillas
2014-06-19 18:20 ` [PATCH v3 05/14] clk: Add generic driver for Maxim PMIC clocks Javier Martinez Canillas
2014-06-25 14:19 ` Krzysztof Kozlowski
2014-06-25 14:36 ` Javier Martinez Canillas
2014-06-19 18:20 ` [PATCH v3 06/14] clk: max77686: Convert to the generic max clock driver Javier Martinez Canillas
2014-06-25 14:30 ` Krzysztof Kozlowski [this message]
2014-06-19 18:20 ` [PATCH v3 07/14] mfd: Add driver for Maxim 77802 Power Management IC Javier Martinez Canillas
2014-06-19 18:20 ` [PATCH v3 08/14] mfd: max77802: Add DT binding documentation Javier Martinez Canillas
2014-06-19 18:20 ` [PATCH v3 09/14] regmap: Add regmap_reg_copy function Javier Martinez Canillas
2014-06-19 18:20 ` [PATCH v3 10/14] regulator: Add driver for Maxim 77802 PMIC regulators Javier Martinez Canillas
2014-06-19 18:20 ` [PATCH v3 11/14] clk: Add driver for Maxim 77802 PMIC clocks Javier Martinez Canillas
2014-06-19 18:20 ` [PATCH v3 12/14] clk: max77802: Add DT binding documentation Javier Martinez Canillas
2014-06-19 18:20 ` [PATCH v3 13/14] rtc: Add driver for Maxim 77802 PMIC Real-Time-Clock Javier Martinez Canillas
2014-06-19 18:20 ` [PATCH v3 14/14] ARM: dts: Add max77802 device node for exynos5420-peach-pit Javier Martinez Canillas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1403706608.22107.24.camel@AMDC1943 \
--to=k.kozlowski@samsung.com \
--cc=a.zummo@towertech.it \
--cc=broonie@kernel.org \
--cc=daniels@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=javier.martinez@collabora.co.uk \
--cc=kgene.kim@samsung.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=olof@lixom.net \
--cc=sameo@linux.intel.com \
--cc=sjoerd.simons@collabora.co.uk \
--cc=tomeu.vizoso@collabora.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).