From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753719AbaGUI3F (ORCPT ); Mon, 21 Jul 2014 04:29:05 -0400 Received: from mail-yh0-f53.google.com ([209.85.213.53]:52697 "EHLO mail-yh0-f53.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753477AbaGUI3D (ORCPT ); Mon, 21 Jul 2014 04:29:03 -0400 From: Lee Jones To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, tj@kernel.org, devicetree@vger.kernel.org Cc: lee.jones@linaro.org, kernel@stlinux.com, Srinivas Kandagatla Subject: [PATCH 1/1] ahci: st: Provide DT bindings for ST's SATA implementation Date: Mon, 21 Jul 2014 09:28:36 +0100 Message-Id: <1405931316-12276-1-git-send-email-lee.jones@linaro.org> X-Mailer: git-send-email 1.8.3.2 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: Srinivas Kandagatla Acked-by: Alexandre Torgue Signed-off-by: Lee Jones --- Hi Tejun, This patch has been on the MLs for a few months now. It documents ST's AHCI driver which was accepted by you and now resides in Mainline. Kind regards, Lee Documentation/devicetree/bindings/ata/ahci-st.txt | 31 +++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 Documentation/devicetree/bindings/ata/ahci-st.txt diff --git a/Documentation/devicetree/bindings/ata/ahci-st.txt b/Documentation/devicetree/bindings/ata/ahci-st.txt new file mode 100644 index 0000000..0574a77 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/ahci-st.txt @@ -0,0 +1,31 @@ +STMicroelectronics STi SATA controller + +This binding describes a SATA device. + +Required properties: + - compatible : Must be "st,sti-ahci" + - reg : Physical base addresses and length of register sets + - interrupts : Interrupt associated with the SATA device + - interrupt-names : Associated name must be; "hostc" + - resets : The power-down and soft-reset lines of SATA IP + - reset-names : Associated names must be; "pwr-dwn" and "sw-rst" + - clocks : The phandle for the clock + - clock-names : Associated name must be; "ahci_clk" + - phys : The phandle for the PHY device + - phy-names : Associated name must be; "ahci_phy" + +Example: + + sata0: sata@fe380000 { + compatible = "st,sti-ahci"; + reg = <0xfe380000 0x1000>; + interrupts = ; + interrupt-names = "hostc"; + phys = <&miphy365x_phy MIPHY_PORT_0 MIPHY_TYPE_SATA>; + phy-names = "ahci_phy"; + resets = <&powerdown STIH416_SATA0_POWERDOWN>, + <&softreset STIH416_SATA0_SOFTRESET>; + reset-names = "pwr-dwn", "sw-rst"; + clocks = <&clk_s_a0_ls CLK_ICN_REG>; + clock-names = "ahci_clk"; + }; -- 1.8.3.2