public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Lee Jones <lee.jones@linaro.org>,
	Bjorn Helgaas <bhelgaas@google.com>,
	linux-kernel@vger.kernel.org,
	Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH v2 3/4] mfd: lpc_sch: Add support for Intel Quark X1000
Date: Tue,  2 Sep 2014 13:45:21 +0300	[thread overview]
Message-ID: <1409654722-6570-4-git-send-email-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <1409654722-6570-1-git-send-email-andriy.shevchenko@linux.intel.com>

Intel Quark X1000 SoC supports IRQ based GPIO. This patch will
enable MFD support for Quark X1000 and provide IRQ resources
to Quark X1000 GPIO device driver.

Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Tested-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/mfd/lpc_sch.c | 37 +++++++++++++++++++++++++++++++------
 1 file changed, 31 insertions(+), 6 deletions(-)

diff --git a/drivers/mfd/lpc_sch.c b/drivers/mfd/lpc_sch.c
index bde070a..ae614b2 100644
--- a/drivers/mfd/lpc_sch.c
+++ b/drivers/mfd/lpc_sch.c
@@ -37,6 +37,9 @@
 #define GPIO_IO_SIZE	64
 #define GPIO_IO_SIZE_CENTERTON	128
 
+/* Intel Quark X1000 GPIO IRQ Number */
+#define GPIO_IRQ_QUARK_X1000	9
+
 #define WDTBASE		0x84
 #define WDT_IO_SIZE	64
 
@@ -44,28 +47,37 @@ enum sch_chipsets {
 	LPC_SCH = 0,		/* Intel Poulsbo SCH */
 	LPC_ITC,		/* Intel Tunnel Creek */
 	LPC_CENTERTON,		/* Intel Centerton */
+	LPC_QUARK_X1000,	/* Intel Quark X1000 */
 };
 
 struct lpc_sch_info {
 	unsigned int io_size_smbus;
 	unsigned int io_size_gpio;
 	unsigned int io_size_wdt;
+	int irq_gpio;
 };
 
 static struct lpc_sch_info sch_chipset_info[] = {
 	[LPC_SCH] = {
 		.io_size_smbus = SMBUS_IO_SIZE,
 		.io_size_gpio = GPIO_IO_SIZE,
+		.irq_gpio = -1,
 	},
 	[LPC_ITC] = {
 		.io_size_smbus = SMBUS_IO_SIZE,
 		.io_size_gpio = GPIO_IO_SIZE,
 		.io_size_wdt = WDT_IO_SIZE,
+		.irq_gpio = -1,
 	},
 	[LPC_CENTERTON] = {
 		.io_size_smbus = SMBUS_IO_SIZE,
 		.io_size_gpio = GPIO_IO_SIZE_CENTERTON,
 		.io_size_wdt = WDT_IO_SIZE,
+		.irq_gpio = -1,
+	},
+	[LPC_QUARK_X1000] = {
+		.io_size_gpio = GPIO_IO_SIZE,
+		.irq_gpio = GPIO_IRQ_QUARK_X1000,
 	},
 };
 
@@ -73,6 +85,7 @@ static const struct pci_device_id lpc_sch_ids[] = {
 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_SCH_LPC), LPC_SCH },
 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ITC_LPC), LPC_ITC },
 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_CENTERTON_ILB), LPC_CENTERTON },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_QUARK_X1000_ILB), LPC_QUARK_X1000 },
 	{ 0, }
 };
 MODULE_DEVICE_TABLE(pci, lpc_sch_ids);
@@ -110,13 +123,13 @@ static int lpc_sch_get_io(struct pci_dev *pdev, int where, const char *name,
 }
 
 static int lpc_sch_populate_cell(struct pci_dev *pdev, int where,
-				 const char *name, int size, int id,
-				 struct mfd_cell *cell)
+				 const char *name, int size, int irq,
+				 int id, struct mfd_cell *cell)
 {
 	struct resource *res;
 	int ret;
 
-	res = devm_kzalloc(&pdev->dev, sizeof(*res), GFP_KERNEL);
+	res = devm_kcalloc(&pdev->dev, 2, sizeof(*res), GFP_KERNEL);
 	if (!res)
 		return -ENOMEM;
 
@@ -132,6 +145,18 @@ static int lpc_sch_populate_cell(struct pci_dev *pdev, int where,
 	cell->ignore_resource_conflicts = true;
 	cell->id = id;
 
+	/* Check if we need to add an IRQ resource */
+	if (irq < 0)
+		return 0;
+
+	res++;
+
+	res->start = irq;
+	res->end = irq;
+	res->flags = IORESOURCE_IRQ;
+
+	cell->num_resources++;
+
 	return 0;
 }
 
@@ -143,7 +168,7 @@ static int lpc_sch_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	int ret;
 
 	ret = lpc_sch_populate_cell(dev, SMBASE, "isch_smbus",
-				    info->io_size_smbus,
+				    info->io_size_smbus, -1,
 				    id->device, &lpc_sch_cells[cells]);
 	if (ret < 0)
 		return ret;
@@ -151,7 +176,7 @@ static int lpc_sch_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		cells++;
 
 	ret = lpc_sch_populate_cell(dev, GPIOBASE, "sch_gpio",
-				    info->io_size_gpio,
+				    info->io_size_gpio, info->irq_gpio,
 				    id->device, &lpc_sch_cells[cells]);
 	if (ret < 0)
 		return ret;
@@ -159,7 +184,7 @@ static int lpc_sch_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		cells++;
 
 	ret = lpc_sch_populate_cell(dev, WDTBASE, "ie6xx_wdt",
-				    info->io_size_wdt,
+				    info->io_size_wdt, -1,
 				    id->device, &lpc_sch_cells[cells]);
 	if (ret < 0)
 		return ret;
-- 
2.1.0


  parent reply	other threads:[~2014-09-02 10:45 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-02 10:45 [PATCH v2 0/4] mfd: lpc_sch: Intel Quark support Andy Shevchenko
2014-09-02 10:45 ` [PATCH v2 1/4] mfd: lpc_sch: reduce duplicate code and improve manageability Andy Shevchenko
2014-09-02 11:54   ` Lee Jones
2014-09-02 10:45 ` [PATCH v2 2/4] pci_ids: add support for Intel Quark ILB Andy Shevchenko
2014-09-02 11:54   ` Lee Jones
2014-09-02 10:45 ` Andy Shevchenko [this message]
2014-09-02 11:54   ` [PATCH v2 3/4] mfd: lpc_sch: Add support for Intel Quark X1000 Lee Jones
2014-09-02 10:45 ` [PATCH v2 4/4] mfd: lpc_sch: remove FSF address Andy Shevchenko
2014-09-02 11:55   ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1409654722-6570-4-git-send-email-andriy.shevchenko@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=bhelgaas@google.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rebecca.swee.fun.chang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox