From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932409AbaISUO6 (ORCPT ); Fri, 19 Sep 2014 16:14:58 -0400 Received: from mail-we0-f177.google.com ([74.125.82.177]:33659 "EHLO mail-we0-f177.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932261AbaISUOy (ORCPT ); Fri, 19 Sep 2014 16:14:54 -0400 From: Sebastian Hesselbarth To: Sebastian Hesselbarth Cc: Jason Cooper , Andrew Lunn , Gregory Clement , Ezequiel Garcia , Thomas Petazzoni , Benoit Masson , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH 7/8] ARM: mvebu: armada-xp: Add I2C eeprom on Lenovo ix4-300d Date: Fri, 19 Sep 2014 22:14:43 +0200 Message-Id: <1411157684-6991-8-git-send-email-sebastian.hesselbarth@gmail.com> In-Reply-To: <1411157684-6991-1-git-send-email-sebastian.hesselbarth@gmail.com> References: <1411157684-6991-1-git-send-email-sebastian.hesselbarth@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org There is an I2C eeprom connected on Lenovo ix4-300d, add the corresponding node. Signed-off-by: Sebastian Hesselbarth --- IIRC, the eeprom contains some register init pairs (address, data) for and is empty otherwise. I'll have to check the boot loader code again, but (again) IIRC, stock u-boot already does the sequence in code and ignores the eeprom. Cc: Jason Cooper Cc: Andrew Lunn Cc: Gregory Clement Cc: Ezequiel Garcia Cc: Thomas Petazzoni Cc: Benoit Masson Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org --- arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts index c5ee6c00766c..cef50da88e45 100644 --- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts +++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts @@ -98,6 +98,11 @@ reg = <0x2e>; }; + at24c64@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + pcf8563@51 { compatible = "nxp,pcf8563"; reg = <0x51>; -- 2.0.0