* [RFC PATCH 00/11] next: mips: Fix default configurations
@ 2014-09-21 0:44 Guenter Roeck
0 siblings, 0 replies; 3+ messages in thread
From: Guenter Roeck @ 2014-09-21 0:44 UTC (permalink / raw)
To: Ralf Baechle
Cc: Randy Dunlap, David S. Miller, Anish Bhatt, linux-mips,
linux-kernel, netdev
Commit 5d6be6a5d486 ('scsi_netlink : Make SCSI_NETLINK dependent on NET instead
of selecting NET') in linux-next changes 'select NET' to 'depends NET'. As a
result, many configurations which do not explicitly select CONFIG_NET are no
longer valid and need to be updated.
An alternative to this patch series would be to revert the original commit which
caused the problem. However, a simple revert is no longer possible due to
secondary commits changing more dependencies; an attempt to build
nlm_xlp_defconfig after reverting the commit still failed with a build error.
It would therefore be necessary to track down and revert all related commits.
This patch series attempts to fix the problem for the affected mips
configurations. I did not look into other architectures or configurations.
The command sequence to create the new configuration files is as follows.
- Run "make ARCH=mips <configuration>" on upstream kernel
- Copy resulting .config to next-20140919
- Run "make ARCH=mips olddefconfig" in next-20140919
- Run "make ARCH=mips savedefconfig"
- Copy resulting defconfig file to arch/mips/configs/<configuration>
- Build the image with the resulting configuration
This sequence results in building images for all modified configurations,
but due to secondary dependency changes can not guarantee correctness
or completeness. Only time will show if there are more problems.
^ permalink raw reply [flat|nested] 3+ messages in thread
* [RFC PATCH 00/11] next: mips: Fix default configurations
@ 2014-09-21 0:45 Guenter Roeck
0 siblings, 0 replies; 3+ messages in thread
From: Guenter Roeck @ 2014-09-21 0:45 UTC (permalink / raw)
To: Ralf Baechle
Cc: Randy Dunlap, David S. Miller, Anish Bhatt, linux-mips,
linux-kernel, netdev
Commit 5d6be6a5d486 ('scsi_netlink : Make SCSI_NETLINK dependent on NET instead
of selecting NET') in linux-next changes 'select NET' to 'depends NET'. As a
result, many configurations which do not explicitly select CONFIG_NET are no
longer valid and need to be updated.
An alternative to this patch series would be to revert the original commit which
caused the problem. However, a simple revert is no longer possible due to
secondary commits changing more dependencies; an attempt to build
nlm_xlp_defconfig after reverting the commit still failed with a build error.
It would therefore be necessary to track down and revert all related commits.
This patch series attempts to fix the problem for the affected mips
configurations. I did not look into other architectures or configurations.
The command sequence to create the new configuration files is as follows.
- Run "make ARCH=mips <configuration>" on upstream kernel
- Copy resulting .config to next-20140919
- Run "make ARCH=mips olddefconfig" in next-20140919
- Run "make ARCH=mips savedefconfig"
- Copy resulting defconfig file to arch/mips/configs/<configuration>
- Build the image with the resulting configuration
This sequence results in building images for all modified configurations,
but due to secondary dependency changes can not guarantee correctness
or completeness. Only time will show if there are more problems.
^ permalink raw reply [flat|nested] 3+ messages in thread
* [RFC PATCH 00/11] next: mips: Fix default configurations
@ 2014-09-21 0:46 Guenter Roeck
0 siblings, 0 replies; 3+ messages in thread
From: Guenter Roeck @ 2014-09-21 0:46 UTC (permalink / raw)
To: Ralf Baechle
Cc: Randy Dunlap, David S. Miller, Anish Bhatt, linux-mips,
linux-kernel, netdev, Guenter Roeck
Commit 5d6be6a5d486 ('scsi_netlink : Make SCSI_NETLINK dependent on NET instead
of selecting NET') in linux-next changes 'select NET' to 'depends NET'. As a
result, many configurations which do not explicitly select CONFIG_NET are no
longer valid and need to be updated.
An alternative to this patch series would be to revert the original commit which
caused the problem. However, a simple revert is no longer possible due to
secondary commits changing more dependencies; an attempt to build
nlm_xlp_defconfig after reverting the commit still failed with a build error.
It would therefore be necessary to track down and revert all related commits.
This patch series attempts to fix the problem for the affected mips
configurations. I did not look into other architectures or configurations.
The command sequence to create the new configuration files is as follows.
- Run "make ARCH=mips <configuration>" on upstream kernel
- Copy resulting .config to next-20140919
- Run "make ARCH=mips olddefconfig" in next-20140919
- Run "make ARCH=mips savedefconfig"
- Copy resulting defconfig file to arch/mips/configs/<configuration>
- Build the image with the resulting configuration
This sequence results in building images for all modified configurations,
but due to secondary dependency changes can not guarantee correctness
or completeness. Only time will show if there are more problems.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2014-09-21 0:46 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-09-21 0:44 [RFC PATCH 00/11] next: mips: Fix default configurations Guenter Roeck
-- strict thread matches above, loose matches on Subject: below --
2014-09-21 0:45 Guenter Roeck
2014-09-21 0:46 Guenter Roeck
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).