From: "Lothar Waßmann" <LW@KARO-electronics.de>
To: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>,
"Russell King" <rmk+kernel@arm.linux.org.uk>,
"Frank Li" <Frank.Li@freescale.com>,
"Fabio Estevam" <fabio.estevam@freescale.com>,
linux-kernel@vger.kernel.org,
"Lothar Waßmann" <LW@KARO-electronics.de>
Subject: [PATCH] net: fec: fix regression on i.MX28 introduced by rx_copybreak support
Date: Tue, 7 Oct 2014 15:19:37 +0200 [thread overview]
Message-ID: <1412687977-11742-1-git-send-email-LW@KARO-electronics.de> (raw)
commit 1b7bde6d659d ("net: fec: implement rx_copybreak to improve rx performance")
introduced a regression for i.MX28. The swap_buffer() function doing
the endian conversion of the received data on i.MX28 may access memory
beyond the actual packet size in the DMA buffer. fec_enet_copybreak()
does not copy those bytes, so that the last bytes of a packet may be
filled with invalid data after swapping.
This will likely lead to checksum errors on received packets.
E.g. when trying to mount an NFS rootfs:
UDP: bad checksum. From 192.168.1.225:111 to 192.168.100.73:44662 ulen 36
Do the byte swapping and copying to the new skb in one go if
necessary.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
---
drivers/net/ethernet/freescale/fec_main.c | 25 +++++++++++++++++++++----
1 file changed, 21 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 87975b5..eaaebad 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -339,6 +339,18 @@ static void *swap_buffer(void *bufaddr, int len)
return bufaddr;
}
+static void *swap_buffer2(void *dst_buf, void *src_buf, int len)
+{
+ int i;
+ unsigned int *src = src_buf;
+ unsigned int *dst = dst_buf;
+
+ for (i = 0; i < DIV_ROUND_UP(len, 4); i++, src++, dst++)
+ *dst = cpu_to_be32(*src);
+
+ return dst_buf;
+}
+
static void fec_dump(struct net_device *ndev)
{
struct fec_enet_private *fep = netdev_priv(ndev);
@@ -1348,7 +1360,7 @@ fec_enet_new_rxbdp(struct net_device *ndev, struct bufdesc *bdp, struct sk_buff
}
static bool fec_enet_copybreak(struct net_device *ndev, struct sk_buff **skb,
- struct bufdesc *bdp, u32 length)
+ struct bufdesc *bdp, u32 length, int swap)
{
struct fec_enet_private *fep = netdev_priv(ndev);
struct sk_buff *new_skb;
@@ -1363,7 +1375,10 @@ static bool fec_enet_copybreak(struct net_device *ndev, struct sk_buff **skb,
dma_sync_single_for_cpu(&fep->pdev->dev, bdp->cbd_bufaddr,
FEC_ENET_RX_FRSIZE - fep->rx_align,
DMA_FROM_DEVICE);
- memcpy(new_skb->data, (*skb)->data, length);
+ if (!swap)
+ memcpy(new_skb->data, (*skb)->data, length);
+ else
+ swap_buffer2(new_skb->data, (*skb)->data, length);
*skb = new_skb;
return true;
@@ -1393,6 +1408,7 @@ fec_enet_rx_queue(struct net_device *ndev, int budget, u16 queue_id)
u16 vlan_tag;
int index = 0;
bool is_copybreak;
+ bool need_swap = id_entry->driver_data & FEC_QUIRK_SWAP_FRAME;
#ifdef CONFIG_M532x
flush_cache_all();
@@ -1456,7 +1472,8 @@ fec_enet_rx_queue(struct net_device *ndev, int budget, u16 queue_id)
* include that when passing upstream as it messes up
* bridging applications.
*/
- is_copybreak = fec_enet_copybreak(ndev, &skb, bdp, pkt_len - 4);
+ is_copybreak = fec_enet_copybreak(ndev, &skb, bdp, pkt_len - 4,
+ need_swap);
if (!is_copybreak) {
skb_new = netdev_alloc_skb(ndev, FEC_ENET_RX_FRSIZE);
if (unlikely(!skb_new)) {
@@ -1471,7 +1488,7 @@ fec_enet_rx_queue(struct net_device *ndev, int budget, u16 queue_id)
prefetch(skb->data - NET_IP_ALIGN);
skb_put(skb, pkt_len - 4);
data = skb->data;
- if (id_entry->driver_data & FEC_QUIRK_SWAP_FRAME)
+ if (!is_copybreak && need_swap)
swap_buffer(data, pkt_len);
/* Extract the enhanced buffer descriptor */
--
1.7.10.4
next reply other threads:[~2014-10-07 13:19 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-07 13:19 Lothar Waßmann [this message]
2014-10-07 13:31 ` [PATCH] net: fec: fix regression on i.MX28 introduced by rx_copybreak support David Laight
2014-10-07 14:17 ` Lothar Waßmann
2014-10-07 14:23 ` David Laight
2014-10-07 14:34 ` Eric Dumazet
2014-10-08 4:59 ` Lothar Waßmann
2014-10-07 14:02 ` Fabio Estevam
2014-10-07 14:27 ` Eric Dumazet
2014-10-07 14:41 ` David Laight
2014-10-08 5:01 ` Lothar Waßmann
2014-10-08 8:45 ` David Laight
2014-10-08 8:55 ` Lothar Waßmann
2014-10-07 16:07 ` Sergei Shtylyov
2014-10-08 8:54 ` David Laight
2014-10-08 9:12 ` Russell King - ARM Linux
2014-10-07 17:15 ` David Miller
2014-10-08 4:43 ` Lothar Waßmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1412687977-11742-1-git-send-email-LW@KARO-electronics.de \
--to=lw@karo-electronics.de \
--cc=Frank.Li@freescale.com \
--cc=davem@davemloft.net \
--cc=fabio.estevam@freescale.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=rmk+kernel@arm.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox