From: Oleg Drokin <green@linuxhacker.ru>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-kernel@vger.kernel.org, devel@driverdev.osuosl.org,
Andreas Dilger <andreas.dilger@intel.com>
Cc: Oleg Drokin <green@linuxhacker.ru>
Subject: [PATCH 1/3] staging/lustre/ptlrpc: get rid of lustre 1.8 compatible checksums
Date: Sat, 11 Oct 2014 22:46:52 -0400 [thread overview]
Message-ID: <1413082014-10510-2-git-send-email-green@linuxhacker.ru> (raw)
In-Reply-To: <1413082014-10510-1-git-send-email-green@linuxhacker.ru>
Old version of lustre (1.8) calculated RPC checksums differently,
but the compat code is no longer important since in-kernel
version of lustre is nto compatible with 1.8 lustre servers
(that are long deprecated too).
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
---
drivers/staging/lustre/lustre/include/lustre_net.h | 5 -----
.../staging/lustre/lustre/ptlrpc/pack_generic.c | 26 ----------------------
drivers/staging/lustre/lustre/ptlrpc/sec_null.c | 18 ---------------
3 files changed, 49 deletions(-)
diff --git a/drivers/staging/lustre/lustre/include/lustre_net.h b/drivers/staging/lustre/lustre/include/lustre_net.h
index 0a024d3..0235d7a 100644
--- a/drivers/staging/lustre/lustre/include/lustre_net.h
+++ b/drivers/staging/lustre/lustre/include/lustre_net.h
@@ -2627,12 +2627,7 @@ __u32 lustre_msg_get_timeout(struct lustre_msg *msg);
__u32 lustre_msg_get_service_time(struct lustre_msg *msg);
char *lustre_msg_get_jobid(struct lustre_msg *msg);
__u32 lustre_msg_get_cksum(struct lustre_msg *msg);
-#if LUSTRE_VERSION_CODE < OBD_OCD_VERSION(2, 7, 50, 0)
-__u32 lustre_msg_calc_cksum(struct lustre_msg *msg, int compat18);
-#else
-# warning "remove checksum compatibility support for b1_8"
__u32 lustre_msg_calc_cksum(struct lustre_msg *msg);
-#endif
void lustre_msg_set_handle(struct lustre_msg *msg,
struct lustre_handle *handle);
void lustre_msg_set_type(struct lustre_msg *msg, __u32 type);
diff --git a/drivers/staging/lustre/lustre/ptlrpc/pack_generic.c b/drivers/staging/lustre/lustre/ptlrpc/pack_generic.c
index 50556db..60552f4 100644
--- a/drivers/staging/lustre/lustre/ptlrpc/pack_generic.c
+++ b/drivers/staging/lustre/lustre/ptlrpc/pack_generic.c
@@ -1313,43 +1313,17 @@ __u32 lustre_msg_get_cksum(struct lustre_msg *msg)
}
}
-#if LUSTRE_VERSION_CODE < OBD_OCD_VERSION(2, 7, 50, 0)
-/*
- * In 1.6 and 1.8 the checksum was computed only on struct ptlrpc_body as
- * it was in 1.6 (88 bytes, smaller than the full size in 1.8). It makes
- * more sense to compute the checksum on the full ptlrpc_body, regardless
- * of what size it is, but in order to keep interoperability with 1.8 we
- * can optionally also checksum only the first 88 bytes (caller decides). */
-# define ptlrpc_body_cksum_size_compat18 88
-
-__u32 lustre_msg_calc_cksum(struct lustre_msg *msg, int compat18)
-#else
-# warning "remove checksum compatibility support for b1_8"
__u32 lustre_msg_calc_cksum(struct lustre_msg *msg)
-#endif
{
switch (msg->lm_magic) {
case LUSTRE_MSG_MAGIC_V2: {
struct ptlrpc_body *pb = lustre_msg_ptlrpc_body(msg);
-#if LUSTRE_VERSION_CODE < OBD_OCD_VERSION(2, 7, 50, 0)
- __u32 crc;
- unsigned int hsize = 4;
- __u32 len = compat18 ? ptlrpc_body_cksum_size_compat18 :
- lustre_msg_buflen(msg, MSG_PTLRPC_BODY_OFF);
- LASSERTF(pb, "invalid msg %p: no ptlrpc body!\n", msg);
- cfs_crypto_hash_digest(CFS_HASH_ALG_CRC32, (unsigned char *)pb,
- len, NULL, 0, (unsigned char *)&crc,
- &hsize);
- return crc;
-#else
-# warning "remove checksum compatibility support for b1_8"
__u32 crc;
unsigned int hsize = 4;
cfs_crypto_hash_digest(CFS_HASH_ALG_CRC32, (unsigned char *)pb,
lustre_msg_buflen(msg, MSG_PTLRPC_BODY_OFF),
NULL, 0, (unsigned char *)&crc, &hsize);
return crc;
-#endif
}
default:
CERROR("incorrect message magic: %08x\n", msg->lm_magic);
diff --git a/drivers/staging/lustre/lustre/ptlrpc/sec_null.c b/drivers/staging/lustre/lustre/ptlrpc/sec_null.c
index 099cec3..4e13243 100644
--- a/drivers/staging/lustre/lustre/ptlrpc/sec_null.c
+++ b/drivers/staging/lustre/lustre/ptlrpc/sec_null.c
@@ -101,16 +101,7 @@ int null_ctx_verify(struct ptlrpc_cli_ctx *ctx, struct ptlrpc_request *req)
if (req->rq_early) {
cksums = lustre_msg_get_cksum(req->rq_repdata);
-#if LUSTRE_VERSION_CODE < OBD_OCD_VERSION(2, 7, 50, 0)
- if (lustre_msghdr_get_flags(req->rq_reqmsg) &
- MSGHDR_CKSUM_INCOMPAT18)
- cksumc = lustre_msg_calc_cksum(req->rq_repmsg, 0);
- else
- cksumc = lustre_msg_calc_cksum(req->rq_repmsg, 1);
-#else
-# warning "remove checksum compatibility support for b1_8"
cksumc = lustre_msg_calc_cksum(req->rq_repmsg);
-#endif
if (cksumc != cksums) {
CDEBUG(D_SEC,
"early reply checksum mismatch: %08x != %08x\n",
@@ -371,16 +362,7 @@ int null_authorize(struct ptlrpc_request *req)
} else {
__u32 cksum;
-#if LUSTRE_VERSION_CODE < OBD_OCD_VERSION(2, 7, 50, 0)
- if (lustre_msghdr_get_flags(req->rq_reqmsg) &
- MSGHDR_CKSUM_INCOMPAT18)
- cksum = lustre_msg_calc_cksum(rs->rs_repbuf, 0);
- else
- cksum = lustre_msg_calc_cksum(rs->rs_repbuf, 1);
-#else
-# warning "remove checksum compatibility support for b1_8"
cksum = lustre_msg_calc_cksum(rs->rs_repbuf);
-#endif
lustre_msg_set_cksum(rs->rs_repbuf, cksum);
req->rq_reply_off = 0;
}
--
1.9.3
next prev parent reply other threads:[~2014-10-12 2:47 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-12 2:46 [PATCH 0/3] Lustre: remove old compat code Oleg Drokin
2014-10-12 2:46 ` Oleg Drokin [this message]
2014-10-12 2:46 ` [PATCH 2/3] staging/lustre: get rid of deprecaed acl mount option code Oleg Drokin
2014-10-12 2:46 ` [PATCH 3/3] staging/lustre/quota: Get rid of compat quota code Oleg Drokin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1413082014-10510-2-git-send-email-green@linuxhacker.ru \
--to=green@linuxhacker.ru \
--cc=andreas.dilger@intel.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox