From: Peter Crosthwaite <crosthwaitepeter@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: michals@xilinx.com, sorenb@xilinx.com, steven.wang@digilentinc.com
Subject: [PATCH 1/2] arm: dts: zynq: Move crystal freq. to board level
Date: Sun, 9 Nov 2014 13:38:02 +1000 [thread overview]
Message-ID: <1415504283-31321-1-git-send-email-crosthwaite.peter@gmail.com> (raw)
The fact that all supported boards use the same 33MHz crystal is a
co-incidence. The Zynq PS support a range of crystal freqs so the
hardcoded setting should be removed from the dtsi. Re-implement it
on the board level.
This prepares support for Zynq boards with different crystal
frequencies (e.g. the Digilent ZYBO).
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
---
Im guessing long term this should be converted to a fixed clock. But
I think this at least steps in that direction.
---
arch/arm/boot/dts/zynq-7000.dtsi | 1 -
arch/arm/boot/dts/zynq-parallella.dts | 4 ++++
arch/arm/boot/dts/zynq-zc702.dts | 4 ++++
arch/arm/boot/dts/zynq-zc706.dts | 4 ++++
arch/arm/boot/dts/zynq-zed.dts | 4 ++++
5 files changed, 16 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index ce2ef5b..ee3e5d6 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -243,7 +243,6 @@
clkc: clkc@100 {
#clock-cells = <1>;
compatible = "xlnx,ps7-clkc";
- ps-clk-frequency = <33333333>;
fclk-enable = <0>;
clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
"cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts
index e1f51ca..cd84d45 100644
--- a/arch/arm/boot/dts/zynq-parallella.dts
+++ b/arch/arm/boot/dts/zynq-parallella.dts
@@ -83,3 +83,7 @@
&uart1 {
status = "okay";
};
+
+&clkc {
+ ps-clk-frequency = <33333333>;
+};
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index 94e2cda..24dcece 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -135,3 +135,7 @@
&uart1 {
status = "okay";
};
+
+&clkc {
+ ps-clk-frequency = <33333333>;
+};
diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts
index a8bbdfb..7b88399 100644
--- a/arch/arm/boot/dts/zynq-zc706.dts
+++ b/arch/arm/boot/dts/zynq-zc706.dts
@@ -114,3 +114,7 @@
&uart1 {
status = "okay";
};
+
+&clkc {
+ ps-clk-frequency = <33333333>;
+};
diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts
index 697779a..4662da2 100644
--- a/arch/arm/boot/dts/zynq-zed.dts
+++ b/arch/arm/boot/dts/zynq-zed.dts
@@ -46,3 +46,7 @@
&uart1 {
status = "okay";
};
+
+&clkc {
+ ps-clk-frequency = <33333333>;
+};
--
1.9.1
next reply other threads:[~2014-11-09 3:38 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-09 3:38 Peter Crosthwaite [this message]
2014-11-09 3:38 ` [PATCH 2/2] arm: dts: zynq: Add Digilent ZYBO board Peter Crosthwaite
2014-11-09 21:47 ` Sören Brinkmann
2014-11-10 22:39 ` Peter Crosthwaite
2014-11-10 22:42 ` Sören Brinkmann
2014-11-10 22:56 ` Peter Crosthwaite
[not found] ` <OFCF68BFE0.14A043A7-ON86257D8D.000BF746-86257D8D.000BF749@ni.com>
2014-11-11 7:56 ` Michal Simek
2014-11-28 23:58 ` Peter Crosthwaite
2014-11-09 21:34 ` [PATCH 1/2] arm: dts: zynq: Move crystal freq. to board level Sören Brinkmann
2014-11-10 22:35 ` Peter Crosthwaite
2014-11-10 23:02 ` Sören Brinkmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1415504283-31321-1-git-send-email-crosthwaite.peter@gmail.com \
--to=crosthwaitepeter@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=michals@xilinx.com \
--cc=sorenb@xilinx.com \
--cc=steven.wang@digilentinc.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).