From: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
To: broonie@kernel.org
Cc: lgirdwood@gmail.com, linux-kernel@vger.kernel.org,
patches@opensource.wolfsonmicro.com
Subject: [PATCH] regulator: gpio: fix parsing of gpio list
Date: Wed, 19 Nov 2014 14:13:06 +0000 [thread overview]
Message-ID: <1416406386-22923-1-git-send-email-rf@opensource.wolfsonmicro.com> (raw)
The list of gpios is defined as optional but the code was
failing to properly handle the case of no gpios, and also
failing to check for errors reading the entry from the
devicetree.
This patch fixes the handling of optional gpios - this is a
useful feature enabling the gpio-regulator to be used as a
dummy variable voltage regulator without having to assign any
real GPIO lines.
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
---
drivers/regulator/gpio-regulator.c | 93 ++++++++++++++++++++----------------
1 files changed, 51 insertions(+), 42 deletions(-)
diff --git a/drivers/regulator/gpio-regulator.c b/drivers/regulator/gpio-regulator.c
index 86546c1..b42c7ec 100644
--- a/drivers/regulator/gpio-regulator.c
+++ b/drivers/regulator/gpio-regulator.c
@@ -162,34 +162,41 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np)
config->enable_gpio = of_get_named_gpio(np, "enable-gpio", 0);
- /* Fetch GPIOs. */
- config->nr_gpios = of_gpio_count(np);
-
- config->gpios = devm_kzalloc(dev,
- sizeof(struct gpio) * config->nr_gpios,
- GFP_KERNEL);
- if (!config->gpios)
- return ERR_PTR(-ENOMEM);
-
- proplen = of_property_count_u32_elems(np, "gpios-states");
- /* optional property */
- if (proplen < 0)
- proplen = 0;
-
- if (proplen > 0 && proplen != config->nr_gpios) {
- dev_warn(dev, "gpios <-> gpios-states mismatch\n");
- proplen = 0;
- }
+ /* Fetch GPIOs. - optional property*/
+ ret = of_gpio_count(np);
+ if ((ret < 0) && (ret != -ENOENT))
+ return ERR_PTR(ret);
+
+ if (ret > 0) {
+ config->nr_gpios = ret;
+ config->gpios = devm_kzalloc(dev,
+ sizeof(struct gpio) * config->nr_gpios,
+ GFP_KERNEL);
+ if (!config->gpios)
+ return ERR_PTR(-ENOMEM);
+
+ proplen = of_property_count_u32_elems(np, "gpios-states");
+ /* optional property */
+ if (proplen < 0)
+ proplen = 0;
+
+ if (proplen > 0 && proplen != config->nr_gpios) {
+ dev_warn(dev, "gpios <-> gpios-states mismatch\n");
+ proplen = 0;
+ }
- for (i = 0; i < config->nr_gpios; i++) {
- gpio = of_get_named_gpio(np, "gpios", i);
- if (gpio < 0)
- break;
- config->gpios[i].gpio = gpio;
- if (proplen > 0) {
- of_property_read_u32_index(np, "gpios-states", i, &ret);
- if (ret)
- config->gpios[i].flags = GPIOF_OUT_INIT_HIGH;
+ for (i = 0; i < config->nr_gpios; i++) {
+ gpio = of_get_named_gpio(np, "gpios", i);
+ if (gpio < 0)
+ break;
+ config->gpios[i].gpio = gpio;
+ if (proplen > 0) {
+ of_property_read_u32_index(np, "gpios-states",
+ i, &ret);
+ if (ret)
+ config->gpios[i].flags =
+ GPIOF_OUT_INIT_HIGH;
+ }
}
}
@@ -261,13 +268,23 @@ static int gpio_regulator_probe(struct platform_device *pdev)
goto err;
}
- drvdata->gpios = kmemdup(config->gpios,
- config->nr_gpios * sizeof(struct gpio),
- GFP_KERNEL);
- if (drvdata->gpios == NULL) {
- dev_err(&pdev->dev, "Failed to allocate gpio data\n");
- ret = -ENOMEM;
- goto err_name;
+ if (config->nr_gpios != 0) {
+ drvdata->gpios = kmemdup(config->gpios,
+ config->nr_gpios * sizeof(struct gpio),
+ GFP_KERNEL);
+ if (drvdata->gpios == NULL) {
+ dev_err(&pdev->dev, "Failed to allocate gpio data\n");
+ ret = -ENOMEM;
+ goto err_name;
+ }
+
+ drvdata->nr_gpios = config->nr_gpios;
+ ret = gpio_request_array(drvdata->gpios, drvdata->nr_gpios);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Could not obtain regulator setting GPIOs: %d\n", ret);
+ goto err_memstate;
+ }
}
drvdata->states = kmemdup(config->states,
@@ -301,14 +318,6 @@ static int gpio_regulator_probe(struct platform_device *pdev)
goto err_memgpio;
}
- drvdata->nr_gpios = config->nr_gpios;
- ret = gpio_request_array(drvdata->gpios, drvdata->nr_gpios);
- if (ret) {
- dev_err(&pdev->dev,
- "Could not obtain regulator setting GPIOs: %d\n", ret);
- goto err_memstate;
- }
-
/* build initial state from gpio init data. */
state = 0;
for (ptr = 0; ptr < drvdata->nr_gpios; ptr++) {
--
1.7.2.5
next reply other threads:[~2014-11-19 14:14 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-19 14:13 Richard Fitzgerald [this message]
2014-11-21 19:25 ` [PATCH] regulator: gpio: fix parsing of gpio list Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1416406386-22923-1-git-send-email-rf@opensource.wolfsonmicro.com \
--to=rf@opensource.wolfsonmicro.com \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.wolfsonmicro.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox