From: Wanpeng Li <wanpeng.li@linux.intel.com>
To: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
Wanpeng Li <wanpeng.li@linux.intel.com>
Subject: [PATCH v3 1/3] kvm: x86: Intel XSAVES vmx and msr handle
Date: Tue, 2 Dec 2014 19:14:58 +0800 [thread overview]
Message-ID: <1417518900-42446-2-git-send-email-wanpeng.li@linux.intel.com> (raw)
In-Reply-To: <1417518900-42446-1-git-send-email-wanpeng.li@linux.intel.com>
Intel xsaves vmx and msr handle.
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
---
arch/x86/include/asm/kvm_host.h | 2 ++
arch/x86/include/asm/vmx.h | 3 +++
arch/x86/include/uapi/asm/vmx.h | 6 +++++-
arch/x86/kvm/vmx.c | 31 ++++++++++++++++++++++++++++++-
4 files changed, 40 insertions(+), 2 deletions(-)
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 2896dbc..0c4c88c 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -362,6 +362,7 @@ struct kvm_vcpu_arch {
int mp_state;
u64 ia32_misc_enable_msr;
bool tpr_access_reporting;
+ u64 ia32_xss;
/*
* Paging state of the vcpu
@@ -771,6 +772,7 @@ struct kvm_x86_ops {
enum x86_intercept_stage stage);
void (*handle_external_intr)(struct kvm_vcpu *vcpu);
bool (*mpx_supported)(void);
+ bool (*xsaves_supported)(void);
int (*check_nested_events)(struct kvm_vcpu *vcpu, bool external_intr);
diff --git a/arch/x86/include/asm/vmx.h b/arch/x86/include/asm/vmx.h
index bcbfade..45afaee 100644
--- a/arch/x86/include/asm/vmx.h
+++ b/arch/x86/include/asm/vmx.h
@@ -69,6 +69,7 @@
#define SECONDARY_EXEC_PAUSE_LOOP_EXITING 0x00000400
#define SECONDARY_EXEC_ENABLE_INVPCID 0x00001000
#define SECONDARY_EXEC_SHADOW_VMCS 0x00004000
+#define SECONDARY_EXEC_XSAVES 0x00100000
#define PIN_BASED_EXT_INTR_MASK 0x00000001
@@ -159,6 +160,8 @@ enum vmcs_field {
EOI_EXIT_BITMAP3_HIGH = 0x00002023,
VMREAD_BITMAP = 0x00002026,
VMWRITE_BITMAP = 0x00002028,
+ XSS_EXIT_BITMAP = 0x0000202C,
+ XSS_EXIT_BITMAP_HIGH = 0x0000202D,
GUEST_PHYSICAL_ADDRESS = 0x00002400,
GUEST_PHYSICAL_ADDRESS_HIGH = 0x00002401,
VMCS_LINK_POINTER = 0x00002800,
diff --git a/arch/x86/include/uapi/asm/vmx.h b/arch/x86/include/uapi/asm/vmx.h
index 990a2fe..b813bf9 100644
--- a/arch/x86/include/uapi/asm/vmx.h
+++ b/arch/x86/include/uapi/asm/vmx.h
@@ -72,6 +72,8 @@
#define EXIT_REASON_XSETBV 55
#define EXIT_REASON_APIC_WRITE 56
#define EXIT_REASON_INVPCID 58
+#define EXIT_REASON_XSAVES 63
+#define EXIT_REASON_XRSTORS 64
#define VMX_EXIT_REASONS \
{ EXIT_REASON_EXCEPTION_NMI, "EXCEPTION_NMI" }, \
@@ -116,6 +118,8 @@
{ EXIT_REASON_INVALID_STATE, "INVALID_STATE" }, \
{ EXIT_REASON_INVD, "INVD" }, \
{ EXIT_REASON_INVVPID, "INVVPID" }, \
- { EXIT_REASON_INVPCID, "INVPCID" }
+ { EXIT_REASON_INVPCID, "INVPCID" }, \
+ { EXIT_REASON_XSAVES, "XSAVES" }, \
+ { EXIT_REASON_XRSTORS, "XRSTORS" }
#endif /* _UAPIVMX_H */
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 6a951d8..12915f1 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -761,6 +761,7 @@ static u64 construct_eptp(unsigned long root_hpa);
static void kvm_cpu_vmxon(u64 addr);
static void kvm_cpu_vmxoff(void);
static bool vmx_mpx_supported(void);
+static bool vmx_xsaves_supported(void);
static int vmx_set_tss_addr(struct kvm *kvm, unsigned int addr);
static void vmx_set_segment(struct kvm_vcpu *vcpu,
struct kvm_segment *var, int seg);
@@ -2895,7 +2896,8 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf)
SECONDARY_EXEC_ENABLE_INVPCID |
SECONDARY_EXEC_APIC_REGISTER_VIRT |
SECONDARY_EXEC_VIRTUAL_INTR_DELIVERY |
- SECONDARY_EXEC_SHADOW_VMCS;
+ SECONDARY_EXEC_SHADOW_VMCS |
+ SECONDARY_EXEC_XSAVES;
if (adjust_vmx_controls(min2, opt2,
MSR_IA32_VMX_PROCBASED_CTLS2,
&_cpu_based_2nd_exec_control) < 0)
@@ -4337,6 +4339,7 @@ static void ept_set_mmio_spte_mask(void)
kvm_mmu_set_mmio_spte_mask((0x3ull << 62) | 0x6ull);
}
+#define VMX_XSS_EXIT_BITMAP 0
/*
* Sets up the vmcs for emulated real mode.
*/
@@ -4446,6 +4449,9 @@ static int vmx_vcpu_setup(struct vcpu_vmx *vmx)
vmcs_writel(CR0_GUEST_HOST_MASK, ~0UL);
set_cr4_guest_host_mask(vmx);
+ if (vmx_xsaves_supported())
+ vmcs_write64(XSS_EXIT_BITMAP, VMX_XSS_EXIT_BITMAP);
+
return 0;
}
@@ -5334,6 +5340,20 @@ static int handle_xsetbv(struct kvm_vcpu *vcpu)
return 1;
}
+static int handle_xsaves(struct kvm_vcpu *vcpu)
+{
+ skip_emulated_instruction(vcpu);
+ WARN(1, "this should never happen\n");
+ return 1;
+}
+
+static int handle_xrstors(struct kvm_vcpu *vcpu)
+{
+ skip_emulated_instruction(vcpu);
+ WARN(1, "this should never happen\n");
+ return 1;
+}
+
static int handle_apic_access(struct kvm_vcpu *vcpu)
{
if (likely(fasteoi)) {
@@ -6951,6 +6971,8 @@ static int (*const kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu) = {
[EXIT_REASON_MONITOR_INSTRUCTION] = handle_monitor,
[EXIT_REASON_INVEPT] = handle_invept,
[EXIT_REASON_INVVPID] = handle_invvpid,
+ [EXIT_REASON_XSAVES] = handle_xsaves,
+ [EXIT_REASON_XRSTORS] = handle_xrstors,
};
static const int kvm_vmx_max_exit_handlers =
@@ -7553,6 +7575,12 @@ static bool vmx_mpx_supported(void)
(vmcs_config.vmentry_ctrl & VM_ENTRY_LOAD_BNDCFGS);
}
+static bool vmx_xsaves_supported(void)
+{
+ return vmcs_config.cpu_based_2nd_exec_ctrl &
+ SECONDARY_EXEC_XSAVES;
+}
+
static void vmx_recover_nmi_blocking(struct vcpu_vmx *vmx)
{
u32 exit_intr_info;
@@ -9329,6 +9357,7 @@ static struct kvm_x86_ops vmx_x86_ops = {
.check_intercept = vmx_check_intercept,
.handle_external_intr = vmx_handle_external_intr,
.mpx_supported = vmx_mpx_supported,
+ .xsaves_supported = vmx_xsaves_supported,
.check_nested_events = vmx_check_nested_events,
--
1.9.1
next prev parent reply other threads:[~2014-12-02 11:15 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-02 11:14 [PATCH v3 0/3] kvm: vmx: enable xsaves for kvm Wanpeng Li
2014-12-02 11:14 ` Wanpeng Li [this message]
2014-12-02 11:14 ` [PATCH v3 2/3] kvm: vmx: add kvm_get/set logic to xsaves Wanpeng Li
2014-12-02 13:00 ` [PATCH v3 0/3] kvm: vmx: enable xsaves for kvm Paolo Bonzini
2014-12-03 0:09 ` Wanpeng Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1417518900-42446-2-git-send-email-wanpeng.li@linux.intel.com \
--to=wanpeng.li@linux.intel.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox