Matrox G450 problems with 2.4.0 and xfree

public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed

* Matrox G450 problems with 2.4.0 and xfree
@ 2001-01-30 21:43 Marcel J.E. Mol
  2001-01-30 21:53 ` tc lewis
  2001-01-31  8:44 ` David Woodhouse
  0 siblings, 2 replies; 11+ messages in thread
From: Marcel J.E. Mol @ 2001-01-30 21:43 UTC (permalink / raw)
  To: linux-kernel

Hi,

Installed a Matrox G450 on my linux system. Now it has problems
booting. The kernel is compiled with framebuffer support so is supposed
to boot up with the Linux logo. Unfortunately the systems hangs when 
the kernel switches to the graphics mode. When I first boot into windoze
and the reboot to linux it works fine. So it looks like an
initialisation problem...

Previously I had a matrox G400 card and that worked without any problems.

Also xfree fails when using the svga module (Xfree 4.0.2). When using the
fbdev module it works fine. Again, using the G400 card works fine with svga
module.


lspci shows:

01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 82) (prog-if 00 [VGA])
        Subsystem: Matrox Graphics, Inc.: Unknown device 0641
        Flags: bus master, medium devsel, latency 64, IRQ 11
        Memory at e2000000 (32-bit, prefetchable) [size=32M]
        Memory at df800000 (32-bit, non-prefetchable) [size=16K]
        Memory at df000000 (32-bit, non-prefetchable) [size=8M]
        Expansion ROM at e1fe0000 [disabled] [size=128K]
        Capabilities: <available only to root>

And yes, it really is a G450!

Below follows .config for the 2.4.0 kernel.

If any other info/tests are needed I'll be happy to supply them...

-Marcel
-- 
     ======--------         Marcel J.E. Mol                MESA Consulting B.V.
    =======---------        ph. +31-(0)6-54724868          P.O. Box 112
    =======---------        marcel@mesa.nl                 2630 AC  Nootdorp
__==== www.mesa.nl ---____U_n_i_x______I_n_t_e_r_n_e_t____ The Netherlands ____
 They couldn't think of a number, so they gave me a name!
                                -- Rupert Hine       http://www.ruperthine.com/

#
# Automatically generated by make menuconfig: don't edit
#
CONFIG_X86=y
CONFIG_ISA=y
# CONFIG_SBUS is not set
CONFIG_UID16=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y

#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_M686FXSR is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_USE_3DNOW=y
CONFIG_X86_PGE=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_TOSHIBA is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_SMP is not set
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y

#
# General setup
#
CONFIG_NET=y
# CONFIG_VISWS is not set
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_NAMES=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
CONFIG_HOTPLUG=y

#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_PM=y
CONFIG_ACPI=y
CONFIG_APM=m
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
CONFIG_APM_DO_ENABLE=y
CONFIG_APM_CPU_IDLE=y
CONFIG_APM_DISPLAY_BLANK=y
CONFIG_APM_RTC_IS_GMT=y
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_AMIGA is not set
# CONFIG_PARPORT_MFC3 is not set
# CONFIG_PARPORT_ATARI is not set
# CONFIG_PARPORT_SUNBPP is not set
# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set

#
# Plug and Play configuration
#
CONFIG_PNP=m
CONFIG_ISAPNP=m

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_BLK_DEV_LVM is not set
# CONFIG_LVM_PROC_FS is not set

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_NETLINK=y
CONFIG_RTNETLINK=y
# CONFIG_NETLINK_DEV is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
CONFIG_FILTER=y
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_RTNETLINK=y
CONFIG_NETLINK=y
CONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_FWMARK is not set
CONFIG_IP_ROUTE_NAT=y
# CONFIG_IP_ROUTE_MULTIPATH is not set
CONFIG_IP_ROUTE_TOS=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_ROUTE_LARGE_TABLES is not set
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
CONFIG_SYN_COOKIES=y

#
#   IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_UNCLEAN=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_MIRROR=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_LOG=m
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
CONFIG_IPV6=m
CONFIG_IPV6_EUI64=y
CONFIG_IPV6_NO_PB=y

#
#   IPv6: Netfilter Configuration
#
# CONFIG_IP6_NF_IPTABLES is not set
# CONFIG_KHTTPD is not set
# CONFIG_ATM is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_LLC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NETLINK=y
CONFIG_RTNETLINK=y
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_CSZ=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
# CONFIG_NET_SCH_INGRESS is not set
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_POLICE is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set
# CONFIG_PHONE_IXJ is not set

#
# ATA/IDE/MFM/RLL support
#
CONFIG_IDE=y

#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set
# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set
# CONFIG_BLK_DEV_IDEDISK_IBM is not set
# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set
# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set
# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set
# CONFIG_BLK_DEV_IDEDISK_WD is not set
# CONFIG_BLK_DEV_COMMERIAL is not set
# CONFIG_BLK_DEV_TIVO is not set
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDETAPE=m
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_ISAPNP is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_AEC62XX_TUNING is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_WDC_ALI15X3 is not set
CONFIG_BLK_DEV_AMD7409=y
# CONFIG_AMD7409_OVERRIDE is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_HPT34X_AUTODMA is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_PIIX_TUNING is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_PDC202XX=y
CONFIG_PDC202XX_BURST=y
# CONFIG_BLK_DEV_OSB4 is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_CHIPSETS is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_DMA_NONPCI is not set
CONFIG_BLK_DEV_IDE_MODES=y

#
# SCSI support
#
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SD_EXTRA_DEVS=40
CONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_SR_EXTRA_DEVS=2
CONFIG_CHR_DEV_SG=m
CONFIG_SCSI_DEBUG_QUEUES=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_TCQ_ON_BY_DEFAULT=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
CONFIG_AIC7XXX_PROC_STATS=y
CONFIG_AIC7XXX_RESET_DELAY=5
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
CONFIG_SCSI_NCR53C8XX=y
CONFIG_SCSI_SYM53C8XX=y
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=40
# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set
# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_DEBUG is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_I2O_PCI is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_LAN is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set

#
# Network device support
#
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
# CONFIG_NET_SB1000 is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
# CONFIG_ELPLUS is not set
# CONFIG_EL16 is not set
# CONFIG_EL3 is not set
# CONFIG_3C515 is not set
# CONFIG_ELMC is not set
# CONFIG_ELMC_II is not set
CONFIG_VORTEX=y
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_NET_PCI is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SK98LIN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPPOE is not set
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
CONFIG_SHAPER=m

#
# Wan interfaces
#
# CONFIG_WAN is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# IrDA (infrared) support
#
CONFIG_IRDA=m
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
CONFIG_IRDA_OPTIONS=y
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y

#
# Infrared-port device drivers
#
CONFIG_IRTTY_SIR=m
CONFIG_IRPORT_SIR=m
# CONFIG_NSC_FIR is not set
# CONFIG_WINBOND_FIR is not set
# CONFIG_TOSHIBA_FIR is not set
# CONFIG_SMC_IRCC_FIR is not set
CONFIG_DONGLE=y
# CONFIG_ESI_DONGLE is not set
CONFIG_ACTISYS_DONGLE=m
# CONFIG_TEKRAM_DONGLE is not set
# CONFIG_GIRBIL_DONGLE is not set
# CONFIG_LITELINK_DONGLE is not set
# CONFIG_OLD_BELKIN_DONGLE is not set

#
# ISDN subsystem
#
CONFIG_ISDN=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
# CONFIG_ISDN_PPP_BSDCOMP is not set
CONFIG_ISDN_AUDIO=y
# CONFIG_ISDN_TTY_FAX is not set

#
# ISDN feature submodules
#
CONFIG_ISDN_DRV_LOOP=m
CONFIG_ISDN_DIVERSION=m

#
# Passive ISDN cards
#
CONFIG_ISDN_DRV_HISAX=m
CONFIG_HISAX_EURO=y
# CONFIG_DE_AOC is not set
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
# CONFIG_HISAX_NO_LLC is not set
# CONFIG_HISAX_NO_KEYPAD is not set
# CONFIG_HISAX_1TR6 is not set
# CONFIG_HISAX_NI1 is not set
# CONFIG_HISAX_16_0 is not set
CONFIG_HISAX_16_3=y
# CONFIG_HISAX_TELESPCI is not set
# CONFIG_HISAX_S0BOX is not set
# CONFIG_HISAX_AVM_A1 is not set
# CONFIG_HISAX_FRITZPCI is not set
# CONFIG_HISAX_AVM_A1_PCMCIA is not set
# CONFIG_HISAX_ELSA is not set
# CONFIG_HISAX_IX1MICROR2 is not set
# CONFIG_HISAX_DIEHLDIVA is not set
# CONFIG_HISAX_ASUSCOM is not set
# CONFIG_HISAX_TELEINT is not set
# CONFIG_HISAX_HFCS is not set
# CONFIG_HISAX_SEDLBAUER is not set
# CONFIG_HISAX_SPORTSTER is not set
# CONFIG_HISAX_MIC is not set
# CONFIG_HISAX_NETJET is not set
# CONFIG_HISAX_NETJET_U is not set
# CONFIG_HISAX_NICCY is not set
# CONFIG_HISAX_ISURF is not set
# CONFIG_HISAX_HSTSAPHIR is not set
# CONFIG_HISAX_BKM_A4T is not set
# CONFIG_HISAX_SCT_QUADRO is not set
# CONFIG_HISAX_GAZEL is not set
# CONFIG_HISAX_HFC_PCI is not set
# CONFIG_HISAX_W6692 is not set
# CONFIG_HISAX_HFC_SX is not set

#
# Active ISDN cards
#
# CONFIG_ISDN_DRV_ICN is not set
# CONFIG_ISDN_DRV_PCBIT is not set
# CONFIG_ISDN_DRV_SC is not set
# CONFIG_ISDN_DRV_ACT2000 is not set
# CONFIG_ISDN_DRV_EICON is not set
# CONFIG_ISDN_CAPI is not set
# CONFIG_HYSDN is not set
# CONFIG_HYSDN_CAPI is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Input core support
#
CONFIG_INPUT=m
CONFIG_INPUT_KEYBDEV=m
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
# CONFIG_SERIAL_CONSOLE is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set

#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_PHILIPSPAR is not set
# CONFIG_I2C_ELV is not set
# CONFIG_I2C_VELLEMAN is not set
CONFIG_I2C_ALGOPCF=m
# CONFIG_I2C_ELEKTOR is not set
CONFIG_I2C_CHARDEV=m

#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_MOUSE=y
CONFIG_PSMOUSE=y
# CONFIG_82C710_MOUSE is not set
# CONFIG_PC110_PAD is not set

#
# Joysticks
#
CONFIG_JOYSTICK=y
# CONFIG_INPUT_NS558 is not set
# CONFIG_INPUT_LIGHTNING is not set
# CONFIG_INPUT_PCIGAME is not set
# CONFIG_INPUT_ANALOG is not set
# CONFIG_INPUT_A3D is not set
# CONFIG_INPUT_ADI is not set
# CONFIG_INPUT_COBRA is not set
# CONFIG_INPUT_GF2K is not set
# CONFIG_INPUT_GRIP is not set
# CONFIG_INPUT_INTERACT is not set
# CONFIG_INPUT_TMDC is not set
# CONFIG_INPUT_SIDEWINDER is not set
# CONFIG_INPUT_SERPORT is not set
# CONFIG_INPUT_WARRIOR is not set
# CONFIG_INPUT_MAGELLAN is not set
# CONFIG_INPUT_SPACEORB is not set
# CONFIG_INPUT_SPACEBALL is not set
# CONFIG_INPUT_IFORCE_232 is not set
# CONFIG_INPUT_IFORCE_USB is not set
# CONFIG_INPUT_DB9 is not set
# CONFIG_INPUT_GAMECON is not set
# CONFIG_INPUT_TURBOGRAFX is not set
# CONFIG_QIC02_TAPE is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_INTEL_RNG is not set
CONFIG_NVRAM=y
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_I810 is not set
CONFIG_AGP_VIA=y
CONFIG_AGP_AMD=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_ALI is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_I810 is not set
CONFIG_DRM_MGA=m

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m

#
# Video For Linux
#
CONFIG_VIDEO_PROC_FS=y
# CONFIG_I2C_PARPORT is not set
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_CPIA is not set
CONFIG_VIDEO_SAA5249=m
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_BUZ is not set
# CONFIG_VIDEO_ZR36120 is not set

#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_MIROPCM20 is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set

#
# File systems
#
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=y
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=m
# CONFIG_UMSDOS_FS is not set
CONFIG_VFAT_FS=y
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_RAMFS is not set
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_MINIX_FS is not set
CONFIG_NTFS_FS=m
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_SYSV_FS_WRITE is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set

#
# Network File Systems
#
# CONFIG_CODA_FS is not set
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_ROOT_NFS is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_SUNRPC=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_NCP_FS=m
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
CONFIG_NCPFS_NFS_NS=y
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_SMB_NLS=y
CONFIG_NLS=y

#
# Native Language Support
#
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_UTF8 is not set

#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
CONFIG_VIDEO_SELECT=y
# CONFIG_MDA_CONSOLE is not set

#
# Frame-buffer support
#
CONFIG_FB=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_CLGEN is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_HGA is not set
CONFIG_VIDEO_SELECT=y
CONFIG_FB_MATROX=y
# CONFIG_FB_MATROX_MILLENIUM is not set
# CONFIG_FB_MATROX_MYSTIQUE is not set
CONFIG_FB_MATROX_G100=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
# CONFIG_FB_MATROX_G450 is not set
# CONFIG_FB_MATROX_MULTIHEAD is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_FBCON_ADVANCED=y
# CONFIG_FBCON_MFB is not set
# CONFIG_FBCON_CFB2 is not set
# CONFIG_FBCON_CFB4 is not set
CONFIG_FBCON_CFB8=y
CONFIG_FBCON_CFB16=y
CONFIG_FBCON_CFB24=y
CONFIG_FBCON_CFB32=y
# CONFIG_FBCON_AFB is not set
# CONFIG_FBCON_ILBM is not set
# CONFIG_FBCON_IPLAN2P2 is not set
# CONFIG_FBCON_IPLAN2P4 is not set
# CONFIG_FBCON_IPLAN2P8 is not set
# CONFIG_FBCON_MAC is not set
# CONFIG_FBCON_VGA_PLANES is not set
CONFIG_FBCON_VGA=m
# CONFIG_FBCON_HGA is not set
# CONFIG_FBCON_FONTWIDTH8_ONLY is not set
CONFIG_FBCON_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set

#
# Sound
#
CONFIG_SOUND=m
# CONFIG_SOUND_CMPCI is not set
CONFIG_SOUND_EMU10K1=m
# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_CS4281 is not set
# CONFIG_SOUND_ES1370 is not set
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_ESSSOLO1 is not set
# CONFIG_SOUND_MAESTRO is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_VIA82CXXX is not set
CONFIG_SOUND_OSS=m
# CONFIG_SOUND_TRACEINIT is not set
# CONFIG_SOUND_DMAP is not set
# CONFIG_SOUND_AD1816 is not set
# CONFIG_SOUND_SGALAXY is not set
# CONFIG_SOUND_ADLIB is not set
# CONFIG_SOUND_ACI_MIXER is not set
# CONFIG_SOUND_CS4232 is not set
# CONFIG_SOUND_SSCAPE is not set
# CONFIG_SOUND_GUS is not set
# CONFIG_SOUND_ICH is not set
CONFIG_SOUND_VMIDI=m
# CONFIG_SOUND_TRIX is not set
# CONFIG_SOUND_MSS is not set
# CONFIG_SOUND_MPU401 is not set
# CONFIG_SOUND_NM256 is not set
# CONFIG_SOUND_MAD16 is not set
# CONFIG_SOUND_PAS is not set
# CONFIG_PAS_JOYSTICK is not set
# CONFIG_SOUND_PSS is not set
# CONFIG_SOUND_SB is not set
# CONFIG_SOUND_AWE32_SYNTH is not set
# CONFIG_SOUND_WAVEFRONT is not set
# CONFIG_SOUND_MAUI is not set
CONFIG_SOUND_YM3812=m
CONFIG_SOUND_OPL3SA1=m
# CONFIG_SOUND_OPL3SA2 is not set
# CONFIG_SOUND_YMPCI is not set
# CONFIG_SOUND_YMFPCI is not set
CONFIG_SOUND_UART6850=m
# CONFIG_SOUND_AEDSP16 is not set
CONFIG_SOUND_TVMIXER=m

#
# USB support
#
CONFIG_USB=m
CONFIG_USB_DEBUG=y
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_BANDWIDTH is not set
CONFIG_USB_UHCI=m
CONFIG_USB_UHCI_ALT=m
# CONFIG_USB_OHCI is not set
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH is not set
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
CONFIG_USB_HID=m
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_WACOM is not set
CONFIG_USB_DC2XX=m
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_PLUSB is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_NET1080 is not set
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
# CONFIG_USB_RIO500 is not set

#
# Kernel hacking
#
CONFIG_MAGIC_SYSRQ=y
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: Matrox G450 problems with 2.4.0 and xfree
  2001-01-30 21:43 Marcel J.E. Mol
@ 2001-01-30 21:53 ` tc lewis
  2001-01-30 23:06   ` Marcel J.E. Mol
  2001-01-31  8:44 ` David Woodhouse
  1 sibling, 1 reply; 11+ messages in thread
From: tc lewis @ 2001-01-30 21:53 UTC (permalink / raw)
  To: Marcel J.E. Mol; +Cc: linux-kernel


try the latest driver that matrox provides.  i had to do this with just a
stock redhat 7.0 system.  i don't think the standard kernel distributions
redhat packages use a driver that knows about the 450 yet.

http://www.matrox.com/mga/support/drivers/files/linux_04.cfm

-tcl.


On Tue, 30 Jan 2001, Marcel J.E. Mol wrote:

> Hi,
> 
> Installed a Matrox G450 on my linux system. Now it has problems
> booting. The kernel is compiled with framebuffer support so is supposed
> to boot up with the Linux logo. Unfortunately the systems hangs when 
> the kernel switches to the graphics mode. When I first boot into windoze
> and the reboot to linux it works fine. So it looks like an
> initialisation problem...
> 
> Previously I had a matrox G400 card and that worked without any problems.
> 
> Also xfree fails when using the svga module (Xfree 4.0.2). When using the
> fbdev module it works fine. Again, using the G400 card works fine with svga
> module.
> 
> 
> lspci shows:
> 
> 01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 82) (prog-if 00 [VGA])
>         Subsystem: Matrox Graphics, Inc.: Unknown device 0641
>         Flags: bus master, medium devsel, latency 64, IRQ 11
>         Memory at e2000000 (32-bit, prefetchable) [size=32M]
>         Memory at df800000 (32-bit, non-prefetchable) [size=16K]
>         Memory at df000000 (32-bit, non-prefetchable) [size=8M]
>         Expansion ROM at e1fe0000 [disabled] [size=128K]
>         Capabilities: <available only to root>
> 
> And yes, it really is a G450!
> 
> Below follows .config for the 2.4.0 kernel.
> 
> If any other info/tests are needed I'll be happy to supply them...
> 
> -Marcel
> -- 
>      ======--------         Marcel J.E. Mol                MESA Consulting B.V.
>     =======---------        ph. +31-(0)6-54724868          P.O. Box 112
>     =======---------        marcel@mesa.nl                 2630 AC  Nootdorp
> __==== www.mesa.nl ---____U_n_i_x______I_n_t_e_r_n_e_t____ The Netherlands ____
>  They couldn't think of a number, so they gave me a name!
>                                 -- Rupert Hine       http://www.ruperthine.com/
> 
> #
> # Automatically generated by make menuconfig: don't edit
> #
> CONFIG_X86=y
> CONFIG_ISA=y
> # CONFIG_SBUS is not set
> CONFIG_UID16=y
> 
> #
> # Code maturity level options
> #
> CONFIG_EXPERIMENTAL=y
> 
> #
> # Loadable module support
> #
> CONFIG_MODULES=y
> CONFIG_MODVERSIONS=y
> CONFIG_KMOD=y
> 
> #
> # Processor type and features
> #
> # CONFIG_M386 is not set
> # CONFIG_M486 is not set
> # CONFIG_M586 is not set
> # CONFIG_M586TSC is not set
> # CONFIG_M586MMX is not set
> # CONFIG_M686 is not set
> # CONFIG_M686FXSR is not set
> # CONFIG_MPENTIUM4 is not set
> # CONFIG_MK6 is not set
> CONFIG_MK7=y
> # CONFIG_MCRUSOE is not set
> # CONFIG_MWINCHIPC6 is not set
> # CONFIG_MWINCHIP2 is not set
> # CONFIG_MWINCHIP3D is not set
> CONFIG_X86_WP_WORKS_OK=y
> CONFIG_X86_INVLPG=y
> CONFIG_X86_CMPXCHG=y
> CONFIG_X86_BSWAP=y
> CONFIG_X86_POPAD_OK=y
> CONFIG_X86_L1_CACHE_SHIFT=6
> CONFIG_X86_TSC=y
> CONFIG_X86_GOOD_APIC=y
> CONFIG_X86_USE_3DNOW=y
> CONFIG_X86_PGE=y
> CONFIG_X86_USE_PPRO_CHECKSUM=y
> # CONFIG_TOSHIBA is not set
> # CONFIG_MICROCODE is not set
> CONFIG_X86_MSR=m
> CONFIG_X86_CPUID=m
> CONFIG_NOHIGHMEM=y
> # CONFIG_HIGHMEM4G is not set
> # CONFIG_HIGHMEM64G is not set
> # CONFIG_MATH_EMULATION is not set
> CONFIG_MTRR=y
> # CONFIG_SMP is not set
> CONFIG_X86_UP_IOAPIC=y
> CONFIG_X86_IO_APIC=y
> CONFIG_X86_LOCAL_APIC=y
> 
> #
> # General setup
> #
> CONFIG_NET=y
> # CONFIG_VISWS is not set
> CONFIG_PCI=y
> # CONFIG_PCI_GOBIOS is not set
> # CONFIG_PCI_GODIRECT is not set
> CONFIG_PCI_GOANY=y
> CONFIG_PCI_BIOS=y
> CONFIG_PCI_DIRECT=y
> CONFIG_PCI_NAMES=y
> # CONFIG_EISA is not set
> # CONFIG_MCA is not set
> CONFIG_HOTPLUG=y
> 
> #
> # PCMCIA/CardBus support
> #
> # CONFIG_PCMCIA is not set
> CONFIG_SYSVIPC=y
> CONFIG_BSD_PROCESS_ACCT=y
> CONFIG_SYSCTL=y
> CONFIG_KCORE_ELF=y
> # CONFIG_KCORE_AOUT is not set
> CONFIG_BINFMT_AOUT=m
> CONFIG_BINFMT_ELF=y
> CONFIG_BINFMT_MISC=m
> CONFIG_PM=y
> CONFIG_ACPI=y
> CONFIG_APM=m
> # CONFIG_APM_IGNORE_USER_SUSPEND is not set
> CONFIG_APM_DO_ENABLE=y
> CONFIG_APM_CPU_IDLE=y
> CONFIG_APM_DISPLAY_BLANK=y
> CONFIG_APM_RTC_IS_GMT=y
> # CONFIG_APM_ALLOW_INTS is not set
> # CONFIG_APM_REAL_MODE_POWER_OFF is not set
> 
> #
> # Memory Technology Devices (MTD)
> #
> # CONFIG_MTD is not set
> 
> #
> # Parallel port support
> #
> CONFIG_PARPORT=y
> CONFIG_PARPORT_PC=y
> # CONFIG_PARPORT_PC_FIFO is not set
> # CONFIG_PARPORT_PC_SUPERIO is not set
> # CONFIG_PARPORT_AMIGA is not set
> # CONFIG_PARPORT_MFC3 is not set
> # CONFIG_PARPORT_ATARI is not set
> # CONFIG_PARPORT_SUNBPP is not set
> # CONFIG_PARPORT_OTHER is not set
> # CONFIG_PARPORT_1284 is not set
> 
> #
> # Plug and Play configuration
> #
> CONFIG_PNP=m
> CONFIG_ISAPNP=m
> 
> #
> # Block devices
> #
> CONFIG_BLK_DEV_FD=y
> # CONFIG_BLK_DEV_XD is not set
> # CONFIG_PARIDE is not set
> # CONFIG_BLK_CPQ_DA is not set
> # CONFIG_BLK_CPQ_CISS_DA is not set
> # CONFIG_BLK_DEV_DAC960 is not set
> CONFIG_BLK_DEV_LOOP=m
> CONFIG_BLK_DEV_NBD=m
> CONFIG_BLK_DEV_RAM=m
> CONFIG_BLK_DEV_RAM_SIZE=4096
> # CONFIG_BLK_DEV_INITRD is not set
> 
> #
> # Multi-device support (RAID and LVM)
> #
> # CONFIG_MD is not set
> # CONFIG_BLK_DEV_MD is not set
> # CONFIG_MD_LINEAR is not set
> # CONFIG_MD_RAID0 is not set
> # CONFIG_MD_RAID1 is not set
> # CONFIG_MD_RAID5 is not set
> # CONFIG_BLK_DEV_LVM is not set
> # CONFIG_LVM_PROC_FS is not set
> 
> #
> # Networking options
> #
> CONFIG_PACKET=y
> # CONFIG_PACKET_MMAP is not set
> CONFIG_NETLINK=y
> CONFIG_RTNETLINK=y
> # CONFIG_NETLINK_DEV is not set
> CONFIG_NETFILTER=y
> CONFIG_NETFILTER_DEBUG=y
> CONFIG_FILTER=y
> CONFIG_UNIX=y
> CONFIG_INET=y
> # CONFIG_IP_MULTICAST is not set
> CONFIG_IP_ADVANCED_ROUTER=y
> CONFIG_RTNETLINK=y
> CONFIG_NETLINK=y
> CONFIG_IP_MULTIPLE_TABLES=y
> # CONFIG_IP_ROUTE_FWMARK is not set
> CONFIG_IP_ROUTE_NAT=y
> # CONFIG_IP_ROUTE_MULTIPATH is not set
> CONFIG_IP_ROUTE_TOS=y
> CONFIG_IP_ROUTE_VERBOSE=y
> # CONFIG_IP_ROUTE_LARGE_TABLES is not set
> # CONFIG_IP_PNP is not set
> CONFIG_NET_IPIP=m
> CONFIG_NET_IPGRE=m
> # CONFIG_ARPD is not set
> # CONFIG_INET_ECN is not set
> CONFIG_SYN_COOKIES=y
> 
> #
> #   IP: Netfilter Configuration
> #
> CONFIG_IP_NF_CONNTRACK=m
> CONFIG_IP_NF_FTP=m
> CONFIG_IP_NF_QUEUE=m
> CONFIG_IP_NF_IPTABLES=m
> CONFIG_IP_NF_MATCH_LIMIT=m
> CONFIG_IP_NF_MATCH_MAC=m
> CONFIG_IP_NF_MATCH_MARK=m
> CONFIG_IP_NF_MATCH_MULTIPORT=m
> CONFIG_IP_NF_MATCH_TOS=m
> CONFIG_IP_NF_MATCH_STATE=m
> CONFIG_IP_NF_MATCH_UNCLEAN=m
> CONFIG_IP_NF_MATCH_OWNER=m
> CONFIG_IP_NF_FILTER=m
> CONFIG_IP_NF_TARGET_REJECT=m
> CONFIG_IP_NF_TARGET_MIRROR=m
> CONFIG_IP_NF_NAT=m
> CONFIG_IP_NF_NAT_NEEDED=y
> CONFIG_IP_NF_TARGET_MASQUERADE=m
> CONFIG_IP_NF_TARGET_REDIRECT=m
> CONFIG_IP_NF_MANGLE=m
> CONFIG_IP_NF_TARGET_TOS=m
> CONFIG_IP_NF_TARGET_MARK=m
> CONFIG_IP_NF_TARGET_LOG=m
> # CONFIG_IP_NF_COMPAT_IPCHAINS is not set
> # CONFIG_IP_NF_COMPAT_IPFWADM is not set
> CONFIG_IPV6=m
> CONFIG_IPV6_EUI64=y
> CONFIG_IPV6_NO_PB=y
> 
> #
> #   IPv6: Netfilter Configuration
> #
> # CONFIG_IP6_NF_IPTABLES is not set
> # CONFIG_KHTTPD is not set
> # CONFIG_ATM is not set
> # CONFIG_IPX is not set
> # CONFIG_ATALK is not set
> # CONFIG_DECNET is not set
> # CONFIG_BRIDGE is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_LLC is not set
> # CONFIG_NET_DIVERT is not set
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
> # CONFIG_NET_FASTROUTE is not set
> # CONFIG_NET_HW_FLOWCONTROL is not set
> 
> #
> # QoS and/or fair queueing
> #
> CONFIG_NET_SCHED=y
> CONFIG_NETLINK=y
> CONFIG_RTNETLINK=y
> CONFIG_NET_SCH_CBQ=m
> CONFIG_NET_SCH_CSZ=m
> CONFIG_NET_SCH_PRIO=m
> CONFIG_NET_SCH_RED=m
> CONFIG_NET_SCH_SFQ=m
> CONFIG_NET_SCH_TEQL=m
> CONFIG_NET_SCH_TBF=m
> CONFIG_NET_SCH_GRED=m
> CONFIG_NET_SCH_DSMARK=m
> # CONFIG_NET_SCH_INGRESS is not set
> CONFIG_NET_QOS=y
> CONFIG_NET_ESTIMATOR=y
> CONFIG_NET_CLS=y
> # CONFIG_NET_CLS_TCINDEX is not set
> # CONFIG_NET_CLS_ROUTE4 is not set
> # CONFIG_NET_CLS_FW is not set
> # CONFIG_NET_CLS_U32 is not set
> # CONFIG_NET_CLS_RSVP is not set
> # CONFIG_NET_CLS_RSVP6 is not set
> # CONFIG_NET_CLS_POLICE is not set
> 
> #
> # Telephony Support
> #
> # CONFIG_PHONE is not set
> # CONFIG_PHONE_IXJ is not set
> 
> #
> # ATA/IDE/MFM/RLL support
> #
> CONFIG_IDE=y
> 
> #
> # IDE, ATA and ATAPI Block devices
> #
> CONFIG_BLK_DEV_IDE=y
> # CONFIG_BLK_DEV_HD_IDE is not set
> # CONFIG_BLK_DEV_HD is not set
> CONFIG_BLK_DEV_IDEDISK=y
> # CONFIG_IDEDISK_MULTI_MODE is not set
> # CONFIG_BLK_DEV_IDEDISK_VENDOR is not set
> # CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set
> # CONFIG_BLK_DEV_IDEDISK_IBM is not set
> # CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set
> # CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set
> # CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set
> # CONFIG_BLK_DEV_IDEDISK_WD is not set
> # CONFIG_BLK_DEV_COMMERIAL is not set
> # CONFIG_BLK_DEV_TIVO is not set
> # CONFIG_BLK_DEV_IDECS is not set
> CONFIG_BLK_DEV_IDECD=m
> CONFIG_BLK_DEV_IDETAPE=m
> # CONFIG_BLK_DEV_IDEFLOPPY is not set
> CONFIG_BLK_DEV_IDESCSI=m
> # CONFIG_BLK_DEV_CMD640 is not set
> # CONFIG_BLK_DEV_CMD640_ENHANCED is not set
> # CONFIG_BLK_DEV_ISAPNP is not set
> # CONFIG_BLK_DEV_RZ1000 is not set
> CONFIG_BLK_DEV_IDEPCI=y
> CONFIG_IDEPCI_SHARE_IRQ=y
> CONFIG_BLK_DEV_IDEDMA_PCI=y
> # CONFIG_BLK_DEV_OFFBOARD is not set
> CONFIG_IDEDMA_PCI_AUTO=y
> CONFIG_BLK_DEV_IDEDMA=y
> # CONFIG_IDEDMA_PCI_WIP is not set
> # CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set
> # CONFIG_BLK_DEV_AEC62XX is not set
> # CONFIG_AEC62XX_TUNING is not set
> # CONFIG_BLK_DEV_ALI15X3 is not set
> # CONFIG_WDC_ALI15X3 is not set
> CONFIG_BLK_DEV_AMD7409=y
> # CONFIG_AMD7409_OVERRIDE is not set
> # CONFIG_BLK_DEV_CMD64X is not set
> # CONFIG_BLK_DEV_CY82C693 is not set
> # CONFIG_BLK_DEV_CS5530 is not set
> # CONFIG_BLK_DEV_HPT34X is not set
> # CONFIG_HPT34X_AUTODMA is not set
> # CONFIG_BLK_DEV_HPT366 is not set
> # CONFIG_BLK_DEV_PIIX is not set
> # CONFIG_PIIX_TUNING is not set
> # CONFIG_BLK_DEV_NS87415 is not set
> # CONFIG_BLK_DEV_OPTI621 is not set
> CONFIG_BLK_DEV_PDC202XX=y
> CONFIG_PDC202XX_BURST=y
> # CONFIG_BLK_DEV_OSB4 is not set
> # CONFIG_BLK_DEV_SIS5513 is not set
> # CONFIG_BLK_DEV_SLC90E66 is not set
> # CONFIG_BLK_DEV_TRM290 is not set
> CONFIG_BLK_DEV_VIA82CXXX=y
> # CONFIG_IDE_CHIPSETS is not set
> CONFIG_IDEDMA_AUTO=y
> # CONFIG_IDEDMA_IVB is not set
> # CONFIG_DMA_NONPCI is not set
> CONFIG_BLK_DEV_IDE_MODES=y
> 
> #
> # SCSI support
> #
> CONFIG_SCSI=y
> CONFIG_BLK_DEV_SD=y
> CONFIG_SD_EXTRA_DEVS=40
> CONFIG_CHR_DEV_ST=y
> # CONFIG_CHR_DEV_OSST is not set
> CONFIG_BLK_DEV_SR=y
> CONFIG_BLK_DEV_SR_VENDOR=y
> CONFIG_SR_EXTRA_DEVS=2
> CONFIG_CHR_DEV_SG=m
> CONFIG_SCSI_DEBUG_QUEUES=y
> CONFIG_SCSI_MULTI_LUN=y
> CONFIG_SCSI_CONSTANTS=y
> CONFIG_SCSI_LOGGING=y
> 
> #
> # SCSI low-level drivers
> #
> # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
> # CONFIG_SCSI_7000FASST is not set
> # CONFIG_SCSI_ACARD is not set
> # CONFIG_SCSI_AHA152X is not set
> # CONFIG_SCSI_AHA1542 is not set
> # CONFIG_SCSI_AHA1740 is not set
> CONFIG_SCSI_AIC7XXX=m
> CONFIG_AIC7XXX_TCQ_ON_BY_DEFAULT=y
> CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
> CONFIG_AIC7XXX_PROC_STATS=y
> CONFIG_AIC7XXX_RESET_DELAY=5
> # CONFIG_SCSI_ADVANSYS is not set
> # CONFIG_SCSI_IN2000 is not set
> # CONFIG_SCSI_AM53C974 is not set
> # CONFIG_SCSI_MEGARAID is not set
> # CONFIG_SCSI_BUSLOGIC is not set
> # CONFIG_SCSI_CPQFCTS is not set
> # CONFIG_SCSI_DMX3191D is not set
> # CONFIG_SCSI_DTC3280 is not set
> # CONFIG_SCSI_EATA is not set
> # CONFIG_SCSI_EATA_DMA is not set
> # CONFIG_SCSI_EATA_PIO is not set
> # CONFIG_SCSI_FUTURE_DOMAIN is not set
> # CONFIG_SCSI_GDTH is not set
> # CONFIG_SCSI_GENERIC_NCR5380 is not set
> # CONFIG_SCSI_IPS is not set
> # CONFIG_SCSI_INITIO is not set
> # CONFIG_SCSI_INIA100 is not set
> # CONFIG_SCSI_PPA is not set
> # CONFIG_SCSI_IMM is not set
> # CONFIG_SCSI_NCR53C406A is not set
> # CONFIG_SCSI_NCR53C7xx is not set
> CONFIG_SCSI_NCR53C8XX=y
> CONFIG_SCSI_SYM53C8XX=y
> CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
> CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
> CONFIG_SCSI_NCR53C8XX_SYNC=40
> # CONFIG_SCSI_NCR53C8XX_PROFILE is not set
> # CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
> # CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set
> # CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set
> # CONFIG_SCSI_PAS16 is not set
> # CONFIG_SCSI_PCI2000 is not set
> # CONFIG_SCSI_PCI2220I is not set
> # CONFIG_SCSI_PSI240I is not set
> # CONFIG_SCSI_QLOGIC_FAS is not set
> # CONFIG_SCSI_QLOGIC_ISP is not set
> # CONFIG_SCSI_QLOGIC_FC is not set
> # CONFIG_SCSI_QLOGIC_1280 is not set
> # CONFIG_SCSI_SEAGATE is not set
> # CONFIG_SCSI_SIM710 is not set
> # CONFIG_SCSI_SYM53C416 is not set
> # CONFIG_SCSI_DC390T is not set
> # CONFIG_SCSI_T128 is not set
> # CONFIG_SCSI_U14_34F is not set
> # CONFIG_SCSI_ULTRASTOR is not set
> # CONFIG_SCSI_DEBUG is not set
> 
> #
> # IEEE 1394 (FireWire) support
> #
> # CONFIG_IEEE1394 is not set
> 
> #
> # I2O device support
> #
> # CONFIG_I2O is not set
> # CONFIG_I2O_PCI is not set
> # CONFIG_I2O_BLOCK is not set
> # CONFIG_I2O_LAN is not set
> # CONFIG_I2O_SCSI is not set
> # CONFIG_I2O_PROC is not set
> 
> #
> # Network device support
> #
> CONFIG_NETDEVICES=y
> 
> #
> # ARCnet devices
> #
> # CONFIG_ARCNET is not set
> CONFIG_DUMMY=m
> # CONFIG_BONDING is not set
> # CONFIG_EQUALIZER is not set
> # CONFIG_TUN is not set
> # CONFIG_ETHERTAP is not set
> # CONFIG_NET_SB1000 is not set
> 
> #
> # Ethernet (10 or 100Mbit)
> #
> CONFIG_NET_ETHERNET=y
> CONFIG_NET_VENDOR_3COM=y
> # CONFIG_EL1 is not set
> # CONFIG_EL2 is not set
> # CONFIG_ELPLUS is not set
> # CONFIG_EL16 is not set
> # CONFIG_EL3 is not set
> # CONFIG_3C515 is not set
> # CONFIG_ELMC is not set
> # CONFIG_ELMC_II is not set
> CONFIG_VORTEX=y
> # CONFIG_LANCE is not set
> # CONFIG_NET_VENDOR_SMC is not set
> # CONFIG_NET_VENDOR_RACAL is not set
> # CONFIG_AT1700 is not set
> # CONFIG_DEPCA is not set
> # CONFIG_HP100 is not set
> # CONFIG_NET_ISA is not set
> # CONFIG_NET_PCI is not set
> # CONFIG_NET_POCKET is not set
> 
> #
> # Ethernet (1000 Mbit)
> #
> # CONFIG_ACENIC is not set
> # CONFIG_HAMACHI is not set
> # CONFIG_YELLOWFIN is not set
> # CONFIG_SK98LIN is not set
> # CONFIG_FDDI is not set
> # CONFIG_HIPPI is not set
> # CONFIG_PLIP is not set
> CONFIG_PPP=m
> # CONFIG_PPP_MULTILINK is not set
> CONFIG_PPP_ASYNC=m
> CONFIG_PPP_SYNC_TTY=m
> CONFIG_PPP_DEFLATE=m
> CONFIG_PPP_BSDCOMP=m
> # CONFIG_PPPOE is not set
> CONFIG_SLIP=m
> CONFIG_SLIP_COMPRESSED=y
> # CONFIG_SLIP_SMART is not set
> # CONFIG_SLIP_MODE_SLIP6 is not set
> 
> #
> # Wireless LAN (non-hamradio)
> #
> # CONFIG_NET_RADIO is not set
> 
> #
> # Token Ring devices
> #
> # CONFIG_TR is not set
> # CONFIG_NET_FC is not set
> # CONFIG_RCPCI is not set
> CONFIG_SHAPER=m
> 
> #
> # Wan interfaces
> #
> # CONFIG_WAN is not set
> 
> #
> # Amateur Radio support
> #
> # CONFIG_HAMRADIO is not set
> 
> #
> # IrDA (infrared) support
> #
> CONFIG_IRDA=m
> CONFIG_IRLAN=m
> CONFIG_IRNET=m
> CONFIG_IRCOMM=m
> CONFIG_IRDA_ULTRA=y
> CONFIG_IRDA_OPTIONS=y
> CONFIG_IRDA_CACHE_LAST_LSAP=y
> CONFIG_IRDA_FAST_RR=y
> CONFIG_IRDA_DEBUG=y
> 
> #
> # Infrared-port device drivers
> #
> CONFIG_IRTTY_SIR=m
> CONFIG_IRPORT_SIR=m
> # CONFIG_NSC_FIR is not set
> # CONFIG_WINBOND_FIR is not set
> # CONFIG_TOSHIBA_FIR is not set
> # CONFIG_SMC_IRCC_FIR is not set
> CONFIG_DONGLE=y
> # CONFIG_ESI_DONGLE is not set
> CONFIG_ACTISYS_DONGLE=m
> # CONFIG_TEKRAM_DONGLE is not set
> # CONFIG_GIRBIL_DONGLE is not set
> # CONFIG_LITELINK_DONGLE is not set
> # CONFIG_OLD_BELKIN_DONGLE is not set
> 
> #
> # ISDN subsystem
> #
> CONFIG_ISDN=m
> CONFIG_ISDN_PPP=y
> CONFIG_ISDN_PPP_VJ=y
> CONFIG_ISDN_MPP=y
> # CONFIG_ISDN_PPP_BSDCOMP is not set
> CONFIG_ISDN_AUDIO=y
> # CONFIG_ISDN_TTY_FAX is not set
> 
> #
> # ISDN feature submodules
> #
> CONFIG_ISDN_DRV_LOOP=m
> CONFIG_ISDN_DIVERSION=m
> 
> #
> # Passive ISDN cards
> #
> CONFIG_ISDN_DRV_HISAX=m
> CONFIG_HISAX_EURO=y
> # CONFIG_DE_AOC is not set
> # CONFIG_HISAX_NO_SENDCOMPLETE is not set
> # CONFIG_HISAX_NO_LLC is not set
> # CONFIG_HISAX_NO_KEYPAD is not set
> # CONFIG_HISAX_1TR6 is not set
> # CONFIG_HISAX_NI1 is not set
> # CONFIG_HISAX_16_0 is not set
> CONFIG_HISAX_16_3=y
> # CONFIG_HISAX_TELESPCI is not set
> # CONFIG_HISAX_S0BOX is not set
> # CONFIG_HISAX_AVM_A1 is not set
> # CONFIG_HISAX_FRITZPCI is not set
> # CONFIG_HISAX_AVM_A1_PCMCIA is not set
> # CONFIG_HISAX_ELSA is not set
> # CONFIG_HISAX_IX1MICROR2 is not set
> # CONFIG_HISAX_DIEHLDIVA is not set
> # CONFIG_HISAX_ASUSCOM is not set
> # CONFIG_HISAX_TELEINT is not set
> # CONFIG_HISAX_HFCS is not set
> # CONFIG_HISAX_SEDLBAUER is not set
> # CONFIG_HISAX_SPORTSTER is not set
> # CONFIG_HISAX_MIC is not set
> # CONFIG_HISAX_NETJET is not set
> # CONFIG_HISAX_NETJET_U is not set
> # CONFIG_HISAX_NICCY is not set
> # CONFIG_HISAX_ISURF is not set
> # CONFIG_HISAX_HSTSAPHIR is not set
> # CONFIG_HISAX_BKM_A4T is not set
> # CONFIG_HISAX_SCT_QUADRO is not set
> # CONFIG_HISAX_GAZEL is not set
> # CONFIG_HISAX_HFC_PCI is not set
> # CONFIG_HISAX_W6692 is not set
> # CONFIG_HISAX_HFC_SX is not set
> 
> #
> # Active ISDN cards
> #
> # CONFIG_ISDN_DRV_ICN is not set
> # CONFIG_ISDN_DRV_PCBIT is not set
> # CONFIG_ISDN_DRV_SC is not set
> # CONFIG_ISDN_DRV_ACT2000 is not set
> # CONFIG_ISDN_DRV_EICON is not set
> # CONFIG_ISDN_CAPI is not set
> # CONFIG_HYSDN is not set
> # CONFIG_HYSDN_CAPI is not set
> 
> #
> # Old CD-ROM drivers (not SCSI, not IDE)
> #
> # CONFIG_CD_NO_IDESCSI is not set
> 
> #
> # Input core support
> #
> CONFIG_INPUT=m
> CONFIG_INPUT_KEYBDEV=m
> CONFIG_INPUT_MOUSEDEV=m
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> CONFIG_INPUT_JOYDEV=m
> CONFIG_INPUT_EVDEV=m
> 
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_VT_CONSOLE=y
> CONFIG_SERIAL=y
> # CONFIG_SERIAL_CONSOLE is not set
> # CONFIG_SERIAL_EXTENDED is not set
> # CONFIG_SERIAL_NONSTANDARD is not set
> CONFIG_UNIX98_PTYS=y
> CONFIG_UNIX98_PTY_COUNT=256
> CONFIG_PRINTER=y
> # CONFIG_LP_CONSOLE is not set
> # CONFIG_PPDEV is not set
> 
> #
> # I2C support
> #
> CONFIG_I2C=m
> CONFIG_I2C_ALGOBIT=m
> # CONFIG_I2C_PHILIPSPAR is not set
> # CONFIG_I2C_ELV is not set
> # CONFIG_I2C_VELLEMAN is not set
> CONFIG_I2C_ALGOPCF=m
> # CONFIG_I2C_ELEKTOR is not set
> CONFIG_I2C_CHARDEV=m
> 
> #
> # Mice
> #
> # CONFIG_BUSMOUSE is not set
> CONFIG_MOUSE=y
> CONFIG_PSMOUSE=y
> # CONFIG_82C710_MOUSE is not set
> # CONFIG_PC110_PAD is not set
> 
> #
> # Joysticks
> #
> CONFIG_JOYSTICK=y
> # CONFIG_INPUT_NS558 is not set
> # CONFIG_INPUT_LIGHTNING is not set
> # CONFIG_INPUT_PCIGAME is not set
> # CONFIG_INPUT_ANALOG is not set
> # CONFIG_INPUT_A3D is not set
> # CONFIG_INPUT_ADI is not set
> # CONFIG_INPUT_COBRA is not set
> # CONFIG_INPUT_GF2K is not set
> # CONFIG_INPUT_GRIP is not set
> # CONFIG_INPUT_INTERACT is not set
> # CONFIG_INPUT_TMDC is not set
> # CONFIG_INPUT_SIDEWINDER is not set
> # CONFIG_INPUT_SERPORT is not set
> # CONFIG_INPUT_WARRIOR is not set
> # CONFIG_INPUT_MAGELLAN is not set
> # CONFIG_INPUT_SPACEORB is not set
> # CONFIG_INPUT_SPACEBALL is not set
> # CONFIG_INPUT_IFORCE_232 is not set
> # CONFIG_INPUT_IFORCE_USB is not set
> # CONFIG_INPUT_DB9 is not set
> # CONFIG_INPUT_GAMECON is not set
> # CONFIG_INPUT_TURBOGRAFX is not set
> # CONFIG_QIC02_TAPE is not set
> 
> #
> # Watchdog Cards
> #
> # CONFIG_WATCHDOG is not set
> # CONFIG_INTEL_RNG is not set
> CONFIG_NVRAM=y
> CONFIG_RTC=y
> # CONFIG_DTLK is not set
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
> 
> #
> # Ftape, the floppy tape device driver
> #
> # CONFIG_FTAPE is not set
> CONFIG_AGP=m
> # CONFIG_AGP_INTEL is not set
> # CONFIG_AGP_I810 is not set
> CONFIG_AGP_VIA=y
> CONFIG_AGP_AMD=y
> # CONFIG_AGP_SIS is not set
> # CONFIG_AGP_ALI is not set
> CONFIG_DRM=y
> # CONFIG_DRM_TDFX is not set
> # CONFIG_DRM_GAMMA is not set
> # CONFIG_DRM_R128 is not set
> # CONFIG_DRM_I810 is not set
> CONFIG_DRM_MGA=m
> 
> #
> # Multimedia devices
> #
> CONFIG_VIDEO_DEV=m
> 
> #
> # Video For Linux
> #
> CONFIG_VIDEO_PROC_FS=y
> # CONFIG_I2C_PARPORT is not set
> CONFIG_VIDEO_BT848=m
> # CONFIG_VIDEO_PMS is not set
> # CONFIG_VIDEO_BWQCAM is not set
> # CONFIG_VIDEO_CQCAM is not set
> # CONFIG_VIDEO_CPIA is not set
> CONFIG_VIDEO_SAA5249=m
> # CONFIG_TUNER_3036 is not set
> # CONFIG_VIDEO_STRADIS is not set
> # CONFIG_VIDEO_ZORAN is not set
> # CONFIG_VIDEO_BUZ is not set
> # CONFIG_VIDEO_ZR36120 is not set
> 
> #
> # Radio Adapters
> #
> # CONFIG_RADIO_CADET is not set
> # CONFIG_RADIO_RTRACK is not set
> # CONFIG_RADIO_RTRACK2 is not set
> # CONFIG_RADIO_AZTECH is not set
> # CONFIG_RADIO_GEMTEK is not set
> # CONFIG_RADIO_MAESTRO is not set
> # CONFIG_RADIO_MIROPCM20 is not set
> # CONFIG_RADIO_SF16FMI is not set
> # CONFIG_RADIO_TERRATEC is not set
> # CONFIG_RADIO_TRUST is not set
> # CONFIG_RADIO_TYPHOON is not set
> # CONFIG_RADIO_ZOLTRIX is not set
> 
> #
> # File systems
> #
> # CONFIG_QUOTA is not set
> CONFIG_AUTOFS_FS=m
> CONFIG_AUTOFS4_FS=y
> # CONFIG_ADFS_FS is not set
> # CONFIG_ADFS_FS_RW is not set
> # CONFIG_AFFS_FS is not set
> # CONFIG_HFS_FS is not set
> # CONFIG_BFS_FS is not set
> CONFIG_FAT_FS=y
> CONFIG_MSDOS_FS=m
> # CONFIG_UMSDOS_FS is not set
> CONFIG_VFAT_FS=y
> # CONFIG_EFS_FS is not set
> # CONFIG_JFFS_FS is not set
> # CONFIG_CRAMFS is not set
> # CONFIG_RAMFS is not set
> CONFIG_ISO9660_FS=y
> CONFIG_JOLIET=y
> # CONFIG_MINIX_FS is not set
> CONFIG_NTFS_FS=m
> # CONFIG_NTFS_RW is not set
> # CONFIG_HPFS_FS is not set
> CONFIG_PROC_FS=y
> # CONFIG_DEVFS_FS is not set
> # CONFIG_DEVFS_MOUNT is not set
> # CONFIG_DEVFS_DEBUG is not set
> CONFIG_DEVPTS_FS=y
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_QNX4FS_RW is not set
> # CONFIG_ROMFS_FS is not set
> CONFIG_EXT2_FS=y
> # CONFIG_SYSV_FS is not set
> # CONFIG_SYSV_FS_WRITE is not set
> # CONFIG_UDF_FS is not set
> # CONFIG_UDF_RW is not set
> # CONFIG_UFS_FS is not set
> # CONFIG_UFS_FS_WRITE is not set
> 
> #
> # Network File Systems
> #
> # CONFIG_CODA_FS is not set
> CONFIG_NFS_FS=y
> CONFIG_NFS_V3=y
> # CONFIG_ROOT_NFS is not set
> CONFIG_NFSD=m
> CONFIG_NFSD_V3=y
> CONFIG_SUNRPC=y
> CONFIG_LOCKD=y
> CONFIG_LOCKD_V4=y
> CONFIG_SMB_FS=m
> # CONFIG_SMB_NLS_DEFAULT is not set
> CONFIG_NCP_FS=m
> # CONFIG_NCPFS_PACKET_SIGNING is not set
> # CONFIG_NCPFS_IOCTL_LOCKING is not set
> # CONFIG_NCPFS_STRONG is not set
> CONFIG_NCPFS_NFS_NS=y
> # CONFIG_NCPFS_OS2_NS is not set
> # CONFIG_NCPFS_SMALLDOS is not set
> # CONFIG_NCPFS_NLS is not set
> # CONFIG_NCPFS_EXTRAS is not set
> 
> #
> # Partition Types
> #
> # CONFIG_PARTITION_ADVANCED is not set
> CONFIG_MSDOS_PARTITION=y
> CONFIG_SMB_NLS=y
> CONFIG_NLS=y
> 
> #
> # Native Language Support
> #
> CONFIG_NLS_DEFAULT="cp437"
> CONFIG_NLS_CODEPAGE_437=y
> # CONFIG_NLS_CODEPAGE_737 is not set
> # CONFIG_NLS_CODEPAGE_775 is not set
> CONFIG_NLS_CODEPAGE_850=y
> # CONFIG_NLS_CODEPAGE_852 is not set
> # CONFIG_NLS_CODEPAGE_855 is not set
> # CONFIG_NLS_CODEPAGE_857 is not set
> # CONFIG_NLS_CODEPAGE_860 is not set
> # CONFIG_NLS_CODEPAGE_861 is not set
> # CONFIG_NLS_CODEPAGE_862 is not set
> # CONFIG_NLS_CODEPAGE_863 is not set
> # CONFIG_NLS_CODEPAGE_864 is not set
> # CONFIG_NLS_CODEPAGE_865 is not set
> # CONFIG_NLS_CODEPAGE_866 is not set
> # CONFIG_NLS_CODEPAGE_869 is not set
> # CONFIG_NLS_CODEPAGE_874 is not set
> # CONFIG_NLS_CODEPAGE_932 is not set
> # CONFIG_NLS_CODEPAGE_936 is not set
> # CONFIG_NLS_CODEPAGE_949 is not set
> # CONFIG_NLS_CODEPAGE_950 is not set
> CONFIG_NLS_ISO8859_1=y
> # CONFIG_NLS_ISO8859_2 is not set
> # CONFIG_NLS_ISO8859_3 is not set
> # CONFIG_NLS_ISO8859_4 is not set
> # CONFIG_NLS_ISO8859_5 is not set
> # CONFIG_NLS_ISO8859_6 is not set
> # CONFIG_NLS_ISO8859_7 is not set
> # CONFIG_NLS_ISO8859_8 is not set
> # CONFIG_NLS_ISO8859_9 is not set
> # CONFIG_NLS_ISO8859_14 is not set
> CONFIG_NLS_ISO8859_15=y
> # CONFIG_NLS_KOI8_R is not set
> # CONFIG_NLS_UTF8 is not set
> 
> #
> # Console drivers
> #
> CONFIG_VGA_CONSOLE=y
> CONFIG_VIDEO_SELECT=y
> # CONFIG_MDA_CONSOLE is not set
> 
> #
> # Frame-buffer support
> #
> CONFIG_FB=y
> CONFIG_DUMMY_CONSOLE=y
> # CONFIG_FB_RIVA is not set
> # CONFIG_FB_CLGEN is not set
> # CONFIG_FB_PM2 is not set
> # CONFIG_FB_CYBER2000 is not set
> # CONFIG_FB_VESA is not set
> # CONFIG_FB_VGA16 is not set
> # CONFIG_FB_HGA is not set
> CONFIG_VIDEO_SELECT=y
> CONFIG_FB_MATROX=y
> # CONFIG_FB_MATROX_MILLENIUM is not set
> # CONFIG_FB_MATROX_MYSTIQUE is not set
> CONFIG_FB_MATROX_G100=y
> CONFIG_FB_MATROX_I2C=m
> CONFIG_FB_MATROX_MAVEN=m
> # CONFIG_FB_MATROX_G450 is not set
> # CONFIG_FB_MATROX_MULTIHEAD is not set
> # CONFIG_FB_ATY is not set
> # CONFIG_FB_ATY128 is not set
> # CONFIG_FB_3DFX is not set
> # CONFIG_FB_SIS is not set
> # CONFIG_FB_VIRTUAL is not set
> CONFIG_FBCON_ADVANCED=y
> # CONFIG_FBCON_MFB is not set
> # CONFIG_FBCON_CFB2 is not set
> # CONFIG_FBCON_CFB4 is not set
> CONFIG_FBCON_CFB8=y
> CONFIG_FBCON_CFB16=y
> CONFIG_FBCON_CFB24=y
> CONFIG_FBCON_CFB32=y
> # CONFIG_FBCON_AFB is not set
> # CONFIG_FBCON_ILBM is not set
> # CONFIG_FBCON_IPLAN2P2 is not set
> # CONFIG_FBCON_IPLAN2P4 is not set
> # CONFIG_FBCON_IPLAN2P8 is not set
> # CONFIG_FBCON_MAC is not set
> # CONFIG_FBCON_VGA_PLANES is not set
> CONFIG_FBCON_VGA=m
> # CONFIG_FBCON_HGA is not set
> # CONFIG_FBCON_FONTWIDTH8_ONLY is not set
> CONFIG_FBCON_FONTS=y
> CONFIG_FONT_8x8=y
> CONFIG_FONT_8x16=y
> # CONFIG_FONT_SUN8x16 is not set
> # CONFIG_FONT_SUN12x22 is not set
> # CONFIG_FONT_6x11 is not set
> # CONFIG_FONT_PEARL_8x8 is not set
> # CONFIG_FONT_ACORN_8x8 is not set
> 
> #
> # Sound
> #
> CONFIG_SOUND=m
> # CONFIG_SOUND_CMPCI is not set
> CONFIG_SOUND_EMU10K1=m
> # CONFIG_SOUND_FUSION is not set
> # CONFIG_SOUND_CS4281 is not set
> # CONFIG_SOUND_ES1370 is not set
> # CONFIG_SOUND_ES1371 is not set
> # CONFIG_SOUND_ESSSOLO1 is not set
> # CONFIG_SOUND_MAESTRO is not set
> # CONFIG_SOUND_SONICVIBES is not set
> # CONFIG_SOUND_TRIDENT is not set
> # CONFIG_SOUND_MSNDCLAS is not set
> # CONFIG_SOUND_MSNDPIN is not set
> # CONFIG_SOUND_VIA82CXXX is not set
> CONFIG_SOUND_OSS=m
> # CONFIG_SOUND_TRACEINIT is not set
> # CONFIG_SOUND_DMAP is not set
> # CONFIG_SOUND_AD1816 is not set
> # CONFIG_SOUND_SGALAXY is not set
> # CONFIG_SOUND_ADLIB is not set
> # CONFIG_SOUND_ACI_MIXER is not set
> # CONFIG_SOUND_CS4232 is not set
> # CONFIG_SOUND_SSCAPE is not set
> # CONFIG_SOUND_GUS is not set
> # CONFIG_SOUND_ICH is not set
> CONFIG_SOUND_VMIDI=m
> # CONFIG_SOUND_TRIX is not set
> # CONFIG_SOUND_MSS is not set
> # CONFIG_SOUND_MPU401 is not set
> # CONFIG_SOUND_NM256 is not set
> # CONFIG_SOUND_MAD16 is not set
> # CONFIG_SOUND_PAS is not set
> # CONFIG_PAS_JOYSTICK is not set
> # CONFIG_SOUND_PSS is not set
> # CONFIG_SOUND_SB is not set
> # CONFIG_SOUND_AWE32_SYNTH is not set
> # CONFIG_SOUND_WAVEFRONT is not set
> # CONFIG_SOUND_MAUI is not set
> CONFIG_SOUND_YM3812=m
> CONFIG_SOUND_OPL3SA1=m
> # CONFIG_SOUND_OPL3SA2 is not set
> # CONFIG_SOUND_YMPCI is not set
> # CONFIG_SOUND_YMFPCI is not set
> CONFIG_SOUND_UART6850=m
> # CONFIG_SOUND_AEDSP16 is not set
> CONFIG_SOUND_TVMIXER=m
> 
> #
> # USB support
> #
> CONFIG_USB=m
> CONFIG_USB_DEBUG=y
> # CONFIG_USB_DEVICEFS is not set
> # CONFIG_USB_BANDWIDTH is not set
> CONFIG_USB_UHCI=m
> CONFIG_USB_UHCI_ALT=m
> # CONFIG_USB_OHCI is not set
> # CONFIG_USB_AUDIO is not set
> # CONFIG_USB_BLUETOOTH is not set
> CONFIG_USB_STORAGE=m
> # CONFIG_USB_STORAGE_DEBUG is not set
> # CONFIG_USB_STORAGE_FREECOM is not set
> # CONFIG_USB_ACM is not set
> # CONFIG_USB_PRINTER is not set
> CONFIG_USB_HID=m
> # CONFIG_USB_KBD is not set
> # CONFIG_USB_MOUSE is not set
> # CONFIG_USB_WACOM is not set
> CONFIG_USB_DC2XX=m
> # CONFIG_USB_MDC800 is not set
> # CONFIG_USB_SCANNER is not set
> # CONFIG_USB_MICROTEK is not set
> # CONFIG_USB_IBMCAM is not set
> # CONFIG_USB_OV511 is not set
> # CONFIG_USB_DSBR is not set
> # CONFIG_USB_DABUSB is not set
> # CONFIG_USB_PLUSB is not set
> # CONFIG_USB_PEGASUS is not set
> # CONFIG_USB_NET1080 is not set
> # CONFIG_USB_USS720 is not set
> 
> #
> # USB Serial Converter support
> #
> # CONFIG_USB_SERIAL is not set
> # CONFIG_USB_RIO500 is not set
> 
> #
> # Kernel hacking
> #
> CONFIG_MAGIC_SYSRQ=y
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> Please read the FAQ at http://www.tux.org/lkml/
> 

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: Matrox G450 problems with 2.4.0 and xfree
  2001-01-30 21:53 ` tc lewis
@ 2001-01-30 23:06   ` Marcel J.E. Mol
  0 siblings, 0 replies; 11+ messages in thread
From: Marcel J.E. Mol @ 2001-01-30 23:06 UTC (permalink / raw)
  To: tc lewis; +Cc: linux-kernel

On Tue, Jan 30, 2001 at 04:53:45PM -0500, tc lewis wrote:
> 
> try the latest driver that matrox provides.  i had to do this with just a
> stock redhat 7.0 system.  i don't think the standard kernel distributions
> redhat packages use a driver that knows about the 450 yet.
> 
> http://www.matrox.com/mga/support/drivers/files/linux_04.cfm

In the G400 time I tried the 1.0.1, 1.0.3 and 1.0.4 matrox driver
with XFree 4.0.1 but only 1.0.1 worked. After installing XFree 4.0.2
I get the same results (the matrox drivers are build for XFree 4.0.1
but I guess the should work for 4.0.2 to as they are 'modules'...).

PS: This is not a redhat distro or any other for that matter. It is just my
own 'distro', started from slackware 0.1 or so. It has always been very stable.
I've run many development kernels on it and  only very few gave rise to
problems...

-Marcel

> On Tue, 30 Jan 2001, Marcel J.E. Mol wrote:
> 
> > Hi,
> > 
> > Installed a Matrox G450 on my linux system. Now it has problems
> > booting. The kernel is compiled with framebuffer support so is supposed
> > to boot up with the Linux logo. Unfortunately the systems hangs when 
> > the kernel switches to the graphics mode. When I first boot into windoze
> > and the reboot to linux it works fine. So it looks like an
> > initialisation problem...
> > 
> > Previously I had a matrox G400 card and that worked without any problems.
> > 
> > Also xfree fails when using the svga module (Xfree 4.0.2). When using the
> > fbdev module it works fine. Again, using the G400 card works fine with svga
> > module.
> > 
> > 
> > lspci shows:
> > 
> > 01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 82) (prog-if 00 [VGA])
> >         Subsystem: Matrox Graphics, Inc.: Unknown device 0641
> >         Flags: bus master, medium devsel, latency 64, IRQ 11
> >         Memory at e2000000 (32-bit, prefetchable) [size=32M]
> >         Memory at df800000 (32-bit, non-prefetchable) [size=16K]
> >         Memory at df000000 (32-bit, non-prefetchable) [size=8M]
> >         Expansion ROM at e1fe0000 [disabled] [size=128K]
> >         Capabilities: <available only to root>
> > 
> > And yes, it really is a G450!
> > 
> > Below follows .config for the 2.4.0 kernel.
> > 
> > If any other info/tests are needed I'll be happy to supply them...
> > 
> > -Marcel
> > -- 
> >      ======--------         Marcel J.E. Mol                MESA Consulting B.V.
> >     =======---------        ph. +31-(0)6-54724868          P.O. Box 112
> >     =======---------        marcel@mesa.nl                 2630 AC  Nootdorp
> > __==== www.mesa.nl ---____U_n_i_x______I_n_t_e_r_n_e_t____ The Netherlands ____
> >  They couldn't think of a number, so they gave me a name!
> >                                 -- Rupert Hine       http://www.ruperthine.com/
> > 
> > #
> > # Automatically generated by make menuconfig: don't edit
> > #
> > CONFIG_X86=y
> > CONFIG_ISA=y
> > # CONFIG_SBUS is not set
> > CONFIG_UID16=y
> > 
> > #
> > # Code maturity level options
> > #
> > CONFIG_EXPERIMENTAL=y
> > 
> > #
> > # Loadable module support
> > #
> > CONFIG_MODULES=y
> > CONFIG_MODVERSIONS=y
> > CONFIG_KMOD=y
> > 
> > #
> > # Processor type and features
> > #
> > # CONFIG_M386 is not set
> > # CONFIG_M486 is not set
> > # CONFIG_M586 is not set
> > # CONFIG_M586TSC is not set
> > # CONFIG_M586MMX is not set
> > # CONFIG_M686 is not set
> > # CONFIG_M686FXSR is not set
> > # CONFIG_MPENTIUM4 is not set
> > # CONFIG_MK6 is not set
> > CONFIG_MK7=y
> > # CONFIG_MCRUSOE is not set
> > # CONFIG_MWINCHIPC6 is not set
> > # CONFIG_MWINCHIP2 is not set
> > # CONFIG_MWINCHIP3D is not set
> > CONFIG_X86_WP_WORKS_OK=y
> > CONFIG_X86_INVLPG=y
> > CONFIG_X86_CMPXCHG=y
> > CONFIG_X86_BSWAP=y
> > CONFIG_X86_POPAD_OK=y
> > CONFIG_X86_L1_CACHE_SHIFT=6
> > CONFIG_X86_TSC=y
> > CONFIG_X86_GOOD_APIC=y
> > CONFIG_X86_USE_3DNOW=y
> > CONFIG_X86_PGE=y
> > CONFIG_X86_USE_PPRO_CHECKSUM=y
> > # CONFIG_TOSHIBA is not set
> > # CONFIG_MICROCODE is not set
> > CONFIG_X86_MSR=m
> > CONFIG_X86_CPUID=m
> > CONFIG_NOHIGHMEM=y
> > # CONFIG_HIGHMEM4G is not set
> > # CONFIG_HIGHMEM64G is not set
> > # CONFIG_MATH_EMULATION is not set
> > CONFIG_MTRR=y
> > # CONFIG_SMP is not set
> > CONFIG_X86_UP_IOAPIC=y
> > CONFIG_X86_IO_APIC=y
> > CONFIG_X86_LOCAL_APIC=y
> > 
> > #
> > # General setup
> > #
> > CONFIG_NET=y
> > # CONFIG_VISWS is not set
> > CONFIG_PCI=y
> > # CONFIG_PCI_GOBIOS is not set
> > # CONFIG_PCI_GODIRECT is not set
> > CONFIG_PCI_GOANY=y
> > CONFIG_PCI_BIOS=y
> > CONFIG_PCI_DIRECT=y
> > CONFIG_PCI_NAMES=y
> > # CONFIG_EISA is not set
> > # CONFIG_MCA is not set
> > CONFIG_HOTPLUG=y
> > 
> > #
> > # PCMCIA/CardBus support
> > #
> > # CONFIG_PCMCIA is not set
> > CONFIG_SYSVIPC=y
> > CONFIG_BSD_PROCESS_ACCT=y
> > CONFIG_SYSCTL=y
> > CONFIG_KCORE_ELF=y
> > # CONFIG_KCORE_AOUT is not set
> > CONFIG_BINFMT_AOUT=m
> > CONFIG_BINFMT_ELF=y
> > CONFIG_BINFMT_MISC=m
> > CONFIG_PM=y
> > CONFIG_ACPI=y
> > CONFIG_APM=m
> > # CONFIG_APM_IGNORE_USER_SUSPEND is not set
> > CONFIG_APM_DO_ENABLE=y
> > CONFIG_APM_CPU_IDLE=y
> > CONFIG_APM_DISPLAY_BLANK=y
> > CONFIG_APM_RTC_IS_GMT=y
> > # CONFIG_APM_ALLOW_INTS is not set
> > # CONFIG_APM_REAL_MODE_POWER_OFF is not set
> > 
> > #
> > # Memory Technology Devices (MTD)
> > #
> > # CONFIG_MTD is not set
> > 
> > #
> > # Parallel port support
> > #
> > CONFIG_PARPORT=y
> > CONFIG_PARPORT_PC=y
> > # CONFIG_PARPORT_PC_FIFO is not set
> > # CONFIG_PARPORT_PC_SUPERIO is not set
> > # CONFIG_PARPORT_AMIGA is not set
> > # CONFIG_PARPORT_MFC3 is not set
> > # CONFIG_PARPORT_ATARI is not set
> > # CONFIG_PARPORT_SUNBPP is not set
> > # CONFIG_PARPORT_OTHER is not set
> > # CONFIG_PARPORT_1284 is not set
> > 
> > #
> > # Plug and Play configuration
> > #
> > CONFIG_PNP=m
> > CONFIG_ISAPNP=m
> > 
> > #
> > # Block devices
> > #
> > CONFIG_BLK_DEV_FD=y
> > # CONFIG_BLK_DEV_XD is not set
> > # CONFIG_PARIDE is not set
> > # CONFIG_BLK_CPQ_DA is not set
> > # CONFIG_BLK_CPQ_CISS_DA is not set
> > # CONFIG_BLK_DEV_DAC960 is not set
> > CONFIG_BLK_DEV_LOOP=m
> > CONFIG_BLK_DEV_NBD=m
> > CONFIG_BLK_DEV_RAM=m
> > CONFIG_BLK_DEV_RAM_SIZE=4096
> > # CONFIG_BLK_DEV_INITRD is not set
> > 
> > #
> > # Multi-device support (RAID and LVM)
> > #
> > # CONFIG_MD is not set
> > # CONFIG_BLK_DEV_MD is not set
> > # CONFIG_MD_LINEAR is not set
> > # CONFIG_MD_RAID0 is not set
> > # CONFIG_MD_RAID1 is not set
> > # CONFIG_MD_RAID5 is not set
> > # CONFIG_BLK_DEV_LVM is not set
> > # CONFIG_LVM_PROC_FS is not set
> > 
> > #
> > # Networking options
> > #
> > CONFIG_PACKET=y
> > # CONFIG_PACKET_MMAP is not set
> > CONFIG_NETLINK=y
> > CONFIG_RTNETLINK=y
> > # CONFIG_NETLINK_DEV is not set
> > CONFIG_NETFILTER=y
> > CONFIG_NETFILTER_DEBUG=y
> > CONFIG_FILTER=y
> > CONFIG_UNIX=y
> > CONFIG_INET=y
> > # CONFIG_IP_MULTICAST is not set
> > CONFIG_IP_ADVANCED_ROUTER=y
> > CONFIG_RTNETLINK=y
> > CONFIG_NETLINK=y
> > CONFIG_IP_MULTIPLE_TABLES=y
> > # CONFIG_IP_ROUTE_FWMARK is not set
> > CONFIG_IP_ROUTE_NAT=y
> > # CONFIG_IP_ROUTE_MULTIPATH is not set
> > CONFIG_IP_ROUTE_TOS=y
> > CONFIG_IP_ROUTE_VERBOSE=y
> > # CONFIG_IP_ROUTE_LARGE_TABLES is not set
> > # CONFIG_IP_PNP is not set
> > CONFIG_NET_IPIP=m
> > CONFIG_NET_IPGRE=m
> > # CONFIG_ARPD is not set
> > # CONFIG_INET_ECN is not set
> > CONFIG_SYN_COOKIES=y
> > 
> > #
> > #   IP: Netfilter Configuration
> > #
> > CONFIG_IP_NF_CONNTRACK=m
> > CONFIG_IP_NF_FTP=m
> > CONFIG_IP_NF_QUEUE=m
> > CONFIG_IP_NF_IPTABLES=m
> > CONFIG_IP_NF_MATCH_LIMIT=m
> > CONFIG_IP_NF_MATCH_MAC=m
> > CONFIG_IP_NF_MATCH_MARK=m
> > CONFIG_IP_NF_MATCH_MULTIPORT=m
> > CONFIG_IP_NF_MATCH_TOS=m
> > CONFIG_IP_NF_MATCH_STATE=m
> > CONFIG_IP_NF_MATCH_UNCLEAN=m
> > CONFIG_IP_NF_MATCH_OWNER=m
> > CONFIG_IP_NF_FILTER=m
> > CONFIG_IP_NF_TARGET_REJECT=m
> > CONFIG_IP_NF_TARGET_MIRROR=m
> > CONFIG_IP_NF_NAT=m
> > CONFIG_IP_NF_NAT_NEEDED=y
> > CONFIG_IP_NF_TARGET_MASQUERADE=m
> > CONFIG_IP_NF_TARGET_REDIRECT=m
> > CONFIG_IP_NF_MANGLE=m
> > CONFIG_IP_NF_TARGET_TOS=m
> > CONFIG_IP_NF_TARGET_MARK=m
> > CONFIG_IP_NF_TARGET_LOG=m
> > # CONFIG_IP_NF_COMPAT_IPCHAINS is not set
> > # CONFIG_IP_NF_COMPAT_IPFWADM is not set
> > CONFIG_IPV6=m
> > CONFIG_IPV6_EUI64=y
> > CONFIG_IPV6_NO_PB=y
> > 
> > #
> > #   IPv6: Netfilter Configuration
> > #
> > # CONFIG_IP6_NF_IPTABLES is not set
> > # CONFIG_KHTTPD is not set
> > # CONFIG_ATM is not set
> > # CONFIG_IPX is not set
> > # CONFIG_ATALK is not set
> > # CONFIG_DECNET is not set
> > # CONFIG_BRIDGE is not set
> > # CONFIG_X25 is not set
> > # CONFIG_LAPB is not set
> > # CONFIG_LLC is not set
> > # CONFIG_NET_DIVERT is not set
> > # CONFIG_ECONET is not set
> > # CONFIG_WAN_ROUTER is not set
> > # CONFIG_NET_FASTROUTE is not set
> > # CONFIG_NET_HW_FLOWCONTROL is not set
> > 
> > #
> > # QoS and/or fair queueing
> > #
> > CONFIG_NET_SCHED=y
> > CONFIG_NETLINK=y
> > CONFIG_RTNETLINK=y
> > CONFIG_NET_SCH_CBQ=m
> > CONFIG_NET_SCH_CSZ=m
> > CONFIG_NET_SCH_PRIO=m
> > CONFIG_NET_SCH_RED=m
> > CONFIG_NET_SCH_SFQ=m
> > CONFIG_NET_SCH_TEQL=m
> > CONFIG_NET_SCH_TBF=m
> > CONFIG_NET_SCH_GRED=m
> > CONFIG_NET_SCH_DSMARK=m
> > # CONFIG_NET_SCH_INGRESS is not set
> > CONFIG_NET_QOS=y
> > CONFIG_NET_ESTIMATOR=y
> > CONFIG_NET_CLS=y
> > # CONFIG_NET_CLS_TCINDEX is not set
> > # CONFIG_NET_CLS_ROUTE4 is not set
> > # CONFIG_NET_CLS_FW is not set
> > # CONFIG_NET_CLS_U32 is not set
> > # CONFIG_NET_CLS_RSVP is not set
> > # CONFIG_NET_CLS_RSVP6 is not set
> > # CONFIG_NET_CLS_POLICE is not set
> > 
> > #
> > # Telephony Support
> > #
> > # CONFIG_PHONE is not set
> > # CONFIG_PHONE_IXJ is not set
> > 
> > #
> > # ATA/IDE/MFM/RLL support
> > #
> > CONFIG_IDE=y
> > 
> > #
> > # IDE, ATA and ATAPI Block devices
> > #
> > CONFIG_BLK_DEV_IDE=y
> > # CONFIG_BLK_DEV_HD_IDE is not set
> > # CONFIG_BLK_DEV_HD is not set
> > CONFIG_BLK_DEV_IDEDISK=y
> > # CONFIG_IDEDISK_MULTI_MODE is not set
> > # CONFIG_BLK_DEV_IDEDISK_VENDOR is not set
> > # CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set
> > # CONFIG_BLK_DEV_IDEDISK_IBM is not set
> > # CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set
> > # CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set
> > # CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set
> > # CONFIG_BLK_DEV_IDEDISK_WD is not set
> > # CONFIG_BLK_DEV_COMMERIAL is not set
> > # CONFIG_BLK_DEV_TIVO is not set
> > # CONFIG_BLK_DEV_IDECS is not set
> > CONFIG_BLK_DEV_IDECD=m
> > CONFIG_BLK_DEV_IDETAPE=m
> > # CONFIG_BLK_DEV_IDEFLOPPY is not set
> > CONFIG_BLK_DEV_IDESCSI=m
> > # CONFIG_BLK_DEV_CMD640 is not set
> > # CONFIG_BLK_DEV_CMD640_ENHANCED is not set
> > # CONFIG_BLK_DEV_ISAPNP is not set
> > # CONFIG_BLK_DEV_RZ1000 is not set
> > CONFIG_BLK_DEV_IDEPCI=y
> > CONFIG_IDEPCI_SHARE_IRQ=y
> > CONFIG_BLK_DEV_IDEDMA_PCI=y
> > # CONFIG_BLK_DEV_OFFBOARD is not set
> > CONFIG_IDEDMA_PCI_AUTO=y
> > CONFIG_BLK_DEV_IDEDMA=y
> > # CONFIG_IDEDMA_PCI_WIP is not set
> > # CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set
> > # CONFIG_BLK_DEV_AEC62XX is not set
> > # CONFIG_AEC62XX_TUNING is not set
> > # CONFIG_BLK_DEV_ALI15X3 is not set
> > # CONFIG_WDC_ALI15X3 is not set
> > CONFIG_BLK_DEV_AMD7409=y
> > # CONFIG_AMD7409_OVERRIDE is not set
> > # CONFIG_BLK_DEV_CMD64X is not set
> > # CONFIG_BLK_DEV_CY82C693 is not set
> > # CONFIG_BLK_DEV_CS5530 is not set
> > # CONFIG_BLK_DEV_HPT34X is not set
> > # CONFIG_HPT34X_AUTODMA is not set
> > # CONFIG_BLK_DEV_HPT366 is not set
> > # CONFIG_BLK_DEV_PIIX is not set
> > # CONFIG_PIIX_TUNING is not set
> > # CONFIG_BLK_DEV_NS87415 is not set
> > # CONFIG_BLK_DEV_OPTI621 is not set
> > CONFIG_BLK_DEV_PDC202XX=y
> > CONFIG_PDC202XX_BURST=y
> > # CONFIG_BLK_DEV_OSB4 is not set
> > # CONFIG_BLK_DEV_SIS5513 is not set
> > # CONFIG_BLK_DEV_SLC90E66 is not set
> > # CONFIG_BLK_DEV_TRM290 is not set
> > CONFIG_BLK_DEV_VIA82CXXX=y
> > # CONFIG_IDE_CHIPSETS is not set
> > CONFIG_IDEDMA_AUTO=y
> > # CONFIG_IDEDMA_IVB is not set
> > # CONFIG_DMA_NONPCI is not set
> > CONFIG_BLK_DEV_IDE_MODES=y
> > 
> > #
> > # SCSI support
> > #
> > CONFIG_SCSI=y
> > CONFIG_BLK_DEV_SD=y
> > CONFIG_SD_EXTRA_DEVS=40
> > CONFIG_CHR_DEV_ST=y
> > # CONFIG_CHR_DEV_OSST is not set
> > CONFIG_BLK_DEV_SR=y
> > CONFIG_BLK_DEV_SR_VENDOR=y
> > CONFIG_SR_EXTRA_DEVS=2
> > CONFIG_CHR_DEV_SG=m
> > CONFIG_SCSI_DEBUG_QUEUES=y
> > CONFIG_SCSI_MULTI_LUN=y
> > CONFIG_SCSI_CONSTANTS=y
> > CONFIG_SCSI_LOGGING=y
> > 
> > #
> > # SCSI low-level drivers
> > #
> > # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
> > # CONFIG_SCSI_7000FASST is not set
> > # CONFIG_SCSI_ACARD is not set
> > # CONFIG_SCSI_AHA152X is not set
> > # CONFIG_SCSI_AHA1542 is not set
> > # CONFIG_SCSI_AHA1740 is not set
> > CONFIG_SCSI_AIC7XXX=m
> > CONFIG_AIC7XXX_TCQ_ON_BY_DEFAULT=y
> > CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
> > CONFIG_AIC7XXX_PROC_STATS=y
> > CONFIG_AIC7XXX_RESET_DELAY=5
> > # CONFIG_SCSI_ADVANSYS is not set
> > # CONFIG_SCSI_IN2000 is not set
> > # CONFIG_SCSI_AM53C974 is not set
> > # CONFIG_SCSI_MEGARAID is not set
> > # CONFIG_SCSI_BUSLOGIC is not set
> > # CONFIG_SCSI_CPQFCTS is not set
> > # CONFIG_SCSI_DMX3191D is not set
> > # CONFIG_SCSI_DTC3280 is not set
> > # CONFIG_SCSI_EATA is not set
> > # CONFIG_SCSI_EATA_DMA is not set
> > # CONFIG_SCSI_EATA_PIO is not set
> > # CONFIG_SCSI_FUTURE_DOMAIN is not set
> > # CONFIG_SCSI_GDTH is not set
> > # CONFIG_SCSI_GENERIC_NCR5380 is not set
> > # CONFIG_SCSI_IPS is not set
> > # CONFIG_SCSI_INITIO is not set
> > # CONFIG_SCSI_INIA100 is not set
> > # CONFIG_SCSI_PPA is not set
> > # CONFIG_SCSI_IMM is not set
> > # CONFIG_SCSI_NCR53C406A is not set
> > # CONFIG_SCSI_NCR53C7xx is not set
> > CONFIG_SCSI_NCR53C8XX=y
> > CONFIG_SCSI_SYM53C8XX=y
> > CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
> > CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
> > CONFIG_SCSI_NCR53C8XX_SYNC=40
> > # CONFIG_SCSI_NCR53C8XX_PROFILE is not set
> > # CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
> > # CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set
> > # CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set
> > # CONFIG_SCSI_PAS16 is not set
> > # CONFIG_SCSI_PCI2000 is not set
> > # CONFIG_SCSI_PCI2220I is not set
> > # CONFIG_SCSI_PSI240I is not set
> > # CONFIG_SCSI_QLOGIC_FAS is not set
> > # CONFIG_SCSI_QLOGIC_ISP is not set
> > # CONFIG_SCSI_QLOGIC_FC is not set
> > # CONFIG_SCSI_QLOGIC_1280 is not set
> > # CONFIG_SCSI_SEAGATE is not set
> > # CONFIG_SCSI_SIM710 is not set
> > # CONFIG_SCSI_SYM53C416 is not set
> > # CONFIG_SCSI_DC390T is not set
> > # CONFIG_SCSI_T128 is not set
> > # CONFIG_SCSI_U14_34F is not set
> > # CONFIG_SCSI_ULTRASTOR is not set
> > # CONFIG_SCSI_DEBUG is not set
> > 
> > #
> > # IEEE 1394 (FireWire) support
> > #
> > # CONFIG_IEEE1394 is not set
> > 
> > #
> > # I2O device support
> > #
> > # CONFIG_I2O is not set
> > # CONFIG_I2O_PCI is not set
> > # CONFIG_I2O_BLOCK is not set
> > # CONFIG_I2O_LAN is not set
> > # CONFIG_I2O_SCSI is not set
> > # CONFIG_I2O_PROC is not set
> > 
> > #
> > # Network device support
> > #
> > CONFIG_NETDEVICES=y
> > 
> > #
> > # ARCnet devices
> > #
> > # CONFIG_ARCNET is not set
> > CONFIG_DUMMY=m
> > # CONFIG_BONDING is not set
> > # CONFIG_EQUALIZER is not set
> > # CONFIG_TUN is not set
> > # CONFIG_ETHERTAP is not set
> > # CONFIG_NET_SB1000 is not set
> > 
> > #
> > # Ethernet (10 or 100Mbit)
> > #
> > CONFIG_NET_ETHERNET=y
> > CONFIG_NET_VENDOR_3COM=y
> > # CONFIG_EL1 is not set
> > # CONFIG_EL2 is not set
> > # CONFIG_ELPLUS is not set
> > # CONFIG_EL16 is not set
> > # CONFIG_EL3 is not set
> > # CONFIG_3C515 is not set
> > # CONFIG_ELMC is not set
> > # CONFIG_ELMC_II is not set
> > CONFIG_VORTEX=y
> > # CONFIG_LANCE is not set
> > # CONFIG_NET_VENDOR_SMC is not set
> > # CONFIG_NET_VENDOR_RACAL is not set
> > # CONFIG_AT1700 is not set
> > # CONFIG_DEPCA is not set
> > # CONFIG_HP100 is not set
> > # CONFIG_NET_ISA is not set
> > # CONFIG_NET_PCI is not set
> > # CONFIG_NET_POCKET is not set
> > 
> > #
> > # Ethernet (1000 Mbit)
> > #
> > # CONFIG_ACENIC is not set
> > # CONFIG_HAMACHI is not set
> > # CONFIG_YELLOWFIN is not set
> > # CONFIG_SK98LIN is not set
> > # CONFIG_FDDI is not set
> > # CONFIG_HIPPI is not set
> > # CONFIG_PLIP is not set
> > CONFIG_PPP=m
> > # CONFIG_PPP_MULTILINK is not set
> > CONFIG_PPP_ASYNC=m
> > CONFIG_PPP_SYNC_TTY=m
> > CONFIG_PPP_DEFLATE=m
> > CONFIG_PPP_BSDCOMP=m
> > # CONFIG_PPPOE is not set
> > CONFIG_SLIP=m
> > CONFIG_SLIP_COMPRESSED=y
> > # CONFIG_SLIP_SMART is not set
> > # CONFIG_SLIP_MODE_SLIP6 is not set
> > 
> > #
> > # Wireless LAN (non-hamradio)
> > #
> > # CONFIG_NET_RADIO is not set
> > 
> > #
> > # Token Ring devices
> > #
> > # CONFIG_TR is not set
> > # CONFIG_NET_FC is not set
> > # CONFIG_RCPCI is not set
> > CONFIG_SHAPER=m
> > 
> > #
> > # Wan interfaces
> > #
> > # CONFIG_WAN is not set
> > 
> > #
> > # Amateur Radio support
> > #
> > # CONFIG_HAMRADIO is not set
> > 
> > #
> > # IrDA (infrared) support
> > #
> > CONFIG_IRDA=m
> > CONFIG_IRLAN=m
> > CONFIG_IRNET=m
> > CONFIG_IRCOMM=m
> > CONFIG_IRDA_ULTRA=y
> > CONFIG_IRDA_OPTIONS=y
> > CONFIG_IRDA_CACHE_LAST_LSAP=y
> > CONFIG_IRDA_FAST_RR=y
> > CONFIG_IRDA_DEBUG=y
> > 
> > #
> > # Infrared-port device drivers
> > #
> > CONFIG_IRTTY_SIR=m
> > CONFIG_IRPORT_SIR=m
> > # CONFIG_NSC_FIR is not set
> > # CONFIG_WINBOND_FIR is not set
> > # CONFIG_TOSHIBA_FIR is not set
> > # CONFIG_SMC_IRCC_FIR is not set
> > CONFIG_DONGLE=y
> > # CONFIG_ESI_DONGLE is not set
> > CONFIG_ACTISYS_DONGLE=m
> > # CONFIG_TEKRAM_DONGLE is not set
> > # CONFIG_GIRBIL_DONGLE is not set
> > # CONFIG_LITELINK_DONGLE is not set
> > # CONFIG_OLD_BELKIN_DONGLE is not set
> > 
> > #
> > # ISDN subsystem
> > #
> > CONFIG_ISDN=m
> > CONFIG_ISDN_PPP=y
> > CONFIG_ISDN_PPP_VJ=y
> > CONFIG_ISDN_MPP=y
> > # CONFIG_ISDN_PPP_BSDCOMP is not set
> > CONFIG_ISDN_AUDIO=y
> > # CONFIG_ISDN_TTY_FAX is not set
> > 
> > #
> > # ISDN feature submodules
> > #
> > CONFIG_ISDN_DRV_LOOP=m
> > CONFIG_ISDN_DIVERSION=m
> > 
> > #
> > # Passive ISDN cards
> > #
> > CONFIG_ISDN_DRV_HISAX=m
> > CONFIG_HISAX_EURO=y
> > # CONFIG_DE_AOC is not set
> > # CONFIG_HISAX_NO_SENDCOMPLETE is not set
> > # CONFIG_HISAX_NO_LLC is not set
> > # CONFIG_HISAX_NO_KEYPAD is not set
> > # CONFIG_HISAX_1TR6 is not set
> > # CONFIG_HISAX_NI1 is not set
> > # CONFIG_HISAX_16_0 is not set
> > CONFIG_HISAX_16_3=y
> > # CONFIG_HISAX_TELESPCI is not set
> > # CONFIG_HISAX_S0BOX is not set
> > # CONFIG_HISAX_AVM_A1 is not set
> > # CONFIG_HISAX_FRITZPCI is not set
> > # CONFIG_HISAX_AVM_A1_PCMCIA is not set
> > # CONFIG_HISAX_ELSA is not set
> > # CONFIG_HISAX_IX1MICROR2 is not set
> > # CONFIG_HISAX_DIEHLDIVA is not set
> > # CONFIG_HISAX_ASUSCOM is not set
> > # CONFIG_HISAX_TELEINT is not set
> > # CONFIG_HISAX_HFCS is not set
> > # CONFIG_HISAX_SEDLBAUER is not set
> > # CONFIG_HISAX_SPORTSTER is not set
> > # CONFIG_HISAX_MIC is not set
> > # CONFIG_HISAX_NETJET is not set
> > # CONFIG_HISAX_NETJET_U is not set
> > # CONFIG_HISAX_NICCY is not set
> > # CONFIG_HISAX_ISURF is not set
> > # CONFIG_HISAX_HSTSAPHIR is not set
> > # CONFIG_HISAX_BKM_A4T is not set
> > # CONFIG_HISAX_SCT_QUADRO is not set
> > # CONFIG_HISAX_GAZEL is not set
> > # CONFIG_HISAX_HFC_PCI is not set
> > # CONFIG_HISAX_W6692 is not set
> > # CONFIG_HISAX_HFC_SX is not set
> > 
> > #
> > # Active ISDN cards
> > #
> > # CONFIG_ISDN_DRV_ICN is not set
> > # CONFIG_ISDN_DRV_PCBIT is not set
> > # CONFIG_ISDN_DRV_SC is not set
> > # CONFIG_ISDN_DRV_ACT2000 is not set
> > # CONFIG_ISDN_DRV_EICON is not set
> > # CONFIG_ISDN_CAPI is not set
> > # CONFIG_HYSDN is not set
> > # CONFIG_HYSDN_CAPI is not set
> > 
> > #
> > # Old CD-ROM drivers (not SCSI, not IDE)
> > #
> > # CONFIG_CD_NO_IDESCSI is not set
> > 
> > #
> > # Input core support
> > #
> > CONFIG_INPUT=m
> > CONFIG_INPUT_KEYBDEV=m
> > CONFIG_INPUT_MOUSEDEV=m
> > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> > CONFIG_INPUT_JOYDEV=m
> > CONFIG_INPUT_EVDEV=m
> > 
> > #
> > # Character devices
> > #
> > CONFIG_VT=y
> > CONFIG_VT_CONSOLE=y
> > CONFIG_SERIAL=y
> > # CONFIG_SERIAL_CONSOLE is not set
> > # CONFIG_SERIAL_EXTENDED is not set
> > # CONFIG_SERIAL_NONSTANDARD is not set
> > CONFIG_UNIX98_PTYS=y
> > CONFIG_UNIX98_PTY_COUNT=256
> > CONFIG_PRINTER=y
> > # CONFIG_LP_CONSOLE is not set
> > # CONFIG_PPDEV is not set
> > 
> > #
> > # I2C support
> > #
> > CONFIG_I2C=m
> > CONFIG_I2C_ALGOBIT=m
> > # CONFIG_I2C_PHILIPSPAR is not set
> > # CONFIG_I2C_ELV is not set
> > # CONFIG_I2C_VELLEMAN is not set
> > CONFIG_I2C_ALGOPCF=m
> > # CONFIG_I2C_ELEKTOR is not set
> > CONFIG_I2C_CHARDEV=m
> > 
> > #
> > # Mice
> > #
> > # CONFIG_BUSMOUSE is not set
> > CONFIG_MOUSE=y
> > CONFIG_PSMOUSE=y
> > # CONFIG_82C710_MOUSE is not set
> > # CONFIG_PC110_PAD is not set
> > 
> > #
> > # Joysticks
> > #
> > CONFIG_JOYSTICK=y
> > # CONFIG_INPUT_NS558 is not set
> > # CONFIG_INPUT_LIGHTNING is not set
> > # CONFIG_INPUT_PCIGAME is not set
> > # CONFIG_INPUT_ANALOG is not set
> > # CONFIG_INPUT_A3D is not set
> > # CONFIG_INPUT_ADI is not set
> > # CONFIG_INPUT_COBRA is not set
> > # CONFIG_INPUT_GF2K is not set
> > # CONFIG_INPUT_GRIP is not set
> > # CONFIG_INPUT_INTERACT is not set
> > # CONFIG_INPUT_TMDC is not set
> > # CONFIG_INPUT_SIDEWINDER is not set
> > # CONFIG_INPUT_SERPORT is not set
> > # CONFIG_INPUT_WARRIOR is not set
> > # CONFIG_INPUT_MAGELLAN is not set
> > # CONFIG_INPUT_SPACEORB is not set
> > # CONFIG_INPUT_SPACEBALL is not set
> > # CONFIG_INPUT_IFORCE_232 is not set
> > # CONFIG_INPUT_IFORCE_USB is not set
> > # CONFIG_INPUT_DB9 is not set
> > # CONFIG_INPUT_GAMECON is not set
> > # CONFIG_INPUT_TURBOGRAFX is not set
> > # CONFIG_QIC02_TAPE is not set
> > 
> > #
> > # Watchdog Cards
> > #
> > # CONFIG_WATCHDOG is not set
> > # CONFIG_INTEL_RNG is not set
> > CONFIG_NVRAM=y
> > CONFIG_RTC=y
> > # CONFIG_DTLK is not set
> > # CONFIG_R3964 is not set
> > # CONFIG_APPLICOM is not set
> > 
> > #
> > # Ftape, the floppy tape device driver
> > #
> > # CONFIG_FTAPE is not set
> > CONFIG_AGP=m
> > # CONFIG_AGP_INTEL is not set
> > # CONFIG_AGP_I810 is not set
> > CONFIG_AGP_VIA=y
> > CONFIG_AGP_AMD=y
> > # CONFIG_AGP_SIS is not set
> > # CONFIG_AGP_ALI is not set
> > CONFIG_DRM=y
> > # CONFIG_DRM_TDFX is not set
> > # CONFIG_DRM_GAMMA is not set
> > # CONFIG_DRM_R128 is not set
> > # CONFIG_DRM_I810 is not set
> > CONFIG_DRM_MGA=m
> > 
> > #
> > # Multimedia devices
> > #
> > CONFIG_VIDEO_DEV=m
> > 
> > #
> > # Video For Linux
> > #
> > CONFIG_VIDEO_PROC_FS=y
> > # CONFIG_I2C_PARPORT is not set
> > CONFIG_VIDEO_BT848=m
> > # CONFIG_VIDEO_PMS is not set
> > # CONFIG_VIDEO_BWQCAM is not set
> > # CONFIG_VIDEO_CQCAM is not set
> > # CONFIG_VIDEO_CPIA is not set
> > CONFIG_VIDEO_SAA5249=m
> > # CONFIG_TUNER_3036 is not set
> > # CONFIG_VIDEO_STRADIS is not set
> > # CONFIG_VIDEO_ZORAN is not set
> > # CONFIG_VIDEO_BUZ is not set
> > # CONFIG_VIDEO_ZR36120 is not set
> > 
> > #
> > # Radio Adapters
> > #
> > # CONFIG_RADIO_CADET is not set
> > # CONFIG_RADIO_RTRACK is not set
> > # CONFIG_RADIO_RTRACK2 is not set
> > # CONFIG_RADIO_AZTECH is not set
> > # CONFIG_RADIO_GEMTEK is not set
> > # CONFIG_RADIO_MAESTRO is not set
> > # CONFIG_RADIO_MIROPCM20 is not set
> > # CONFIG_RADIO_SF16FMI is not set
> > # CONFIG_RADIO_TERRATEC is not set
> > # CONFIG_RADIO_TRUST is not set
> > # CONFIG_RADIO_TYPHOON is not set
> > # CONFIG_RADIO_ZOLTRIX is not set
> > 
> > #
> > # File systems
> > #
> > # CONFIG_QUOTA is not set
> > CONFIG_AUTOFS_FS=m
> > CONFIG_AUTOFS4_FS=y
> > # CONFIG_ADFS_FS is not set
> > # CONFIG_ADFS_FS_RW is not set
> > # CONFIG_AFFS_FS is not set
> > # CONFIG_HFS_FS is not set
> > # CONFIG_BFS_FS is not set
> > CONFIG_FAT_FS=y
> > CONFIG_MSDOS_FS=m
> > # CONFIG_UMSDOS_FS is not set
> > CONFIG_VFAT_FS=y
> > # CONFIG_EFS_FS is not set
> > # CONFIG_JFFS_FS is not set
> > # CONFIG_CRAMFS is not set
> > # CONFIG_RAMFS is not set
> > CONFIG_ISO9660_FS=y
> > CONFIG_JOLIET=y
> > # CONFIG_MINIX_FS is not set
> > CONFIG_NTFS_FS=m
> > # CONFIG_NTFS_RW is not set
> > # CONFIG_HPFS_FS is not set
> > CONFIG_PROC_FS=y
> > # CONFIG_DEVFS_FS is not set
> > # CONFIG_DEVFS_MOUNT is not set
> > # CONFIG_DEVFS_DEBUG is not set
> > CONFIG_DEVPTS_FS=y
> > # CONFIG_QNX4FS_FS is not set
> > # CONFIG_QNX4FS_RW is not set
> > # CONFIG_ROMFS_FS is not set
> > CONFIG_EXT2_FS=y
> > # CONFIG_SYSV_FS is not set
> > # CONFIG_SYSV_FS_WRITE is not set
> > # CONFIG_UDF_FS is not set
> > # CONFIG_UDF_RW is not set
> > # CONFIG_UFS_FS is not set
> > # CONFIG_UFS_FS_WRITE is not set
> > 
> > #
> > # Network File Systems
> > #
> > # CONFIG_CODA_FS is not set
> > CONFIG_NFS_FS=y
> > CONFIG_NFS_V3=y
> > # CONFIG_ROOT_NFS is not set
> > CONFIG_NFSD=m
> > CONFIG_NFSD_V3=y
> > CONFIG_SUNRPC=y
> > CONFIG_LOCKD=y
> > CONFIG_LOCKD_V4=y
> > CONFIG_SMB_FS=m
> > # CONFIG_SMB_NLS_DEFAULT is not set
> > CONFIG_NCP_FS=m
> > # CONFIG_NCPFS_PACKET_SIGNING is not set
> > # CONFIG_NCPFS_IOCTL_LOCKING is not set
> > # CONFIG_NCPFS_STRONG is not set
> > CONFIG_NCPFS_NFS_NS=y
> > # CONFIG_NCPFS_OS2_NS is not set
> > # CONFIG_NCPFS_SMALLDOS is not set
> > # CONFIG_NCPFS_NLS is not set
> > # CONFIG_NCPFS_EXTRAS is not set
> > 
> > #
> > # Partition Types
> > #
> > # CONFIG_PARTITION_ADVANCED is not set
> > CONFIG_MSDOS_PARTITION=y
> > CONFIG_SMB_NLS=y
> > CONFIG_NLS=y
> > 
> > #
> > # Native Language Support
> > #
> > CONFIG_NLS_DEFAULT="cp437"
> > CONFIG_NLS_CODEPAGE_437=y
> > # CONFIG_NLS_CODEPAGE_737 is not set
> > # CONFIG_NLS_CODEPAGE_775 is not set
> > CONFIG_NLS_CODEPAGE_850=y
> > # CONFIG_NLS_CODEPAGE_852 is not set
> > # CONFIG_NLS_CODEPAGE_855 is not set
> > # CONFIG_NLS_CODEPAGE_857 is not set
> > # CONFIG_NLS_CODEPAGE_860 is not set
> > # CONFIG_NLS_CODEPAGE_861 is not set
> > # CONFIG_NLS_CODEPAGE_862 is not set
> > # CONFIG_NLS_CODEPAGE_863 is not set
> > # CONFIG_NLS_CODEPAGE_864 is not set
> > # CONFIG_NLS_CODEPAGE_865 is not set
> > # CONFIG_NLS_CODEPAGE_866 is not set
> > # CONFIG_NLS_CODEPAGE_869 is not set
> > # CONFIG_NLS_CODEPAGE_874 is not set
> > # CONFIG_NLS_CODEPAGE_932 is not set
> > # CONFIG_NLS_CODEPAGE_936 is not set
> > # CONFIG_NLS_CODEPAGE_949 is not set
> > # CONFIG_NLS_CODEPAGE_950 is not set
> > CONFIG_NLS_ISO8859_1=y
> > # CONFIG_NLS_ISO8859_2 is not set
> > # CONFIG_NLS_ISO8859_3 is not set
> > # CONFIG_NLS_ISO8859_4 is not set
> > # CONFIG_NLS_ISO8859_5 is not set
> > # CONFIG_NLS_ISO8859_6 is not set
> > # CONFIG_NLS_ISO8859_7 is not set
> > # CONFIG_NLS_ISO8859_8 is not set
> > # CONFIG_NLS_ISO8859_9 is not set
> > # CONFIG_NLS_ISO8859_14 is not set
> > CONFIG_NLS_ISO8859_15=y
> > # CONFIG_NLS_KOI8_R is not set
> > # CONFIG_NLS_UTF8 is not set
> > 
> > #
> > # Console drivers
> > #
> > CONFIG_VGA_CONSOLE=y
> > CONFIG_VIDEO_SELECT=y
> > # CONFIG_MDA_CONSOLE is not set
> > 
> > #
> > # Frame-buffer support
> > #
> > CONFIG_FB=y
> > CONFIG_DUMMY_CONSOLE=y
> > # CONFIG_FB_RIVA is not set
> > # CONFIG_FB_CLGEN is not set
> > # CONFIG_FB_PM2 is not set
> > # CONFIG_FB_CYBER2000 is not set
> > # CONFIG_FB_VESA is not set
> > # CONFIG_FB_VGA16 is not set
> > # CONFIG_FB_HGA is not set
> > CONFIG_VIDEO_SELECT=y
> > CONFIG_FB_MATROX=y
> > # CONFIG_FB_MATROX_MILLENIUM is not set
> > # CONFIG_FB_MATROX_MYSTIQUE is not set
> > CONFIG_FB_MATROX_G100=y
> > CONFIG_FB_MATROX_I2C=m
> > CONFIG_FB_MATROX_MAVEN=m
> > # CONFIG_FB_MATROX_G450 is not set
> > # CONFIG_FB_MATROX_MULTIHEAD is not set
> > # CONFIG_FB_ATY is not set
> > # CONFIG_FB_ATY128 is not set
> > # CONFIG_FB_3DFX is not set
> > # CONFIG_FB_SIS is not set
> > # CONFIG_FB_VIRTUAL is not set
> > CONFIG_FBCON_ADVANCED=y
> > # CONFIG_FBCON_MFB is not set
> > # CONFIG_FBCON_CFB2 is not set
> > # CONFIG_FBCON_CFB4 is not set
> > CONFIG_FBCON_CFB8=y
> > CONFIG_FBCON_CFB16=y
> > CONFIG_FBCON_CFB24=y
> > CONFIG_FBCON_CFB32=y
> > # CONFIG_FBCON_AFB is not set
> > # CONFIG_FBCON_ILBM is not set
> > # CONFIG_FBCON_IPLAN2P2 is not set
> > # CONFIG_FBCON_IPLAN2P4 is not set
> > # CONFIG_FBCON_IPLAN2P8 is not set
> > # CONFIG_FBCON_MAC is not set
> > # CONFIG_FBCON_VGA_PLANES is not set
> > CONFIG_FBCON_VGA=m
> > # CONFIG_FBCON_HGA is not set
> > # CONFIG_FBCON_FONTWIDTH8_ONLY is not set
> > CONFIG_FBCON_FONTS=y
> > CONFIG_FONT_8x8=y
> > CONFIG_FONT_8x16=y
> > # CONFIG_FONT_SUN8x16 is not set
> > # CONFIG_FONT_SUN12x22 is not set
> > # CONFIG_FONT_6x11 is not set
> > # CONFIG_FONT_PEARL_8x8 is not set
> > # CONFIG_FONT_ACORN_8x8 is not set
> > 
> > #
> > # Sound
> > #
> > CONFIG_SOUND=m
> > # CONFIG_SOUND_CMPCI is not set
> > CONFIG_SOUND_EMU10K1=m
> > # CONFIG_SOUND_FUSION is not set
> > # CONFIG_SOUND_CS4281 is not set
> > # CONFIG_SOUND_ES1370 is not set
> > # CONFIG_SOUND_ES1371 is not set
> > # CONFIG_SOUND_ESSSOLO1 is not set
> > # CONFIG_SOUND_MAESTRO is not set
> > # CONFIG_SOUND_SONICVIBES is not set
> > # CONFIG_SOUND_TRIDENT is not set
> > # CONFIG_SOUND_MSNDCLAS is not set
> > # CONFIG_SOUND_MSNDPIN is not set
> > # CONFIG_SOUND_VIA82CXXX is not set
> > CONFIG_SOUND_OSS=m
> > # CONFIG_SOUND_TRACEINIT is not set
> > # CONFIG_SOUND_DMAP is not set
> > # CONFIG_SOUND_AD1816 is not set
> > # CONFIG_SOUND_SGALAXY is not set
> > # CONFIG_SOUND_ADLIB is not set
> > # CONFIG_SOUND_ACI_MIXER is not set
> > # CONFIG_SOUND_CS4232 is not set
> > # CONFIG_SOUND_SSCAPE is not set
> > # CONFIG_SOUND_GUS is not set
> > # CONFIG_SOUND_ICH is not set
> > CONFIG_SOUND_VMIDI=m
> > # CONFIG_SOUND_TRIX is not set
> > # CONFIG_SOUND_MSS is not set
> > # CONFIG_SOUND_MPU401 is not set
> > # CONFIG_SOUND_NM256 is not set
> > # CONFIG_SOUND_MAD16 is not set
> > # CONFIG_SOUND_PAS is not set
> > # CONFIG_PAS_JOYSTICK is not set
> > # CONFIG_SOUND_PSS is not set
> > # CONFIG_SOUND_SB is not set
> > # CONFIG_SOUND_AWE32_SYNTH is not set
> > # CONFIG_SOUND_WAVEFRONT is not set
> > # CONFIG_SOUND_MAUI is not set
> > CONFIG_SOUND_YM3812=m
> > CONFIG_SOUND_OPL3SA1=m
> > # CONFIG_SOUND_OPL3SA2 is not set
> > # CONFIG_SOUND_YMPCI is not set
> > # CONFIG_SOUND_YMFPCI is not set
> > CONFIG_SOUND_UART6850=m
> > # CONFIG_SOUND_AEDSP16 is not set
> > CONFIG_SOUND_TVMIXER=m
> > 
> > #
> > # USB support
> > #
> > CONFIG_USB=m
> > CONFIG_USB_DEBUG=y
> > # CONFIG_USB_DEVICEFS is not set
> > # CONFIG_USB_BANDWIDTH is not set
> > CONFIG_USB_UHCI=m
> > CONFIG_USB_UHCI_ALT=m
> > # CONFIG_USB_OHCI is not set
> > # CONFIG_USB_AUDIO is not set
> > # CONFIG_USB_BLUETOOTH is not set
> > CONFIG_USB_STORAGE=m
> > # CONFIG_USB_STORAGE_DEBUG is not set
> > # CONFIG_USB_STORAGE_FREECOM is not set
> > # CONFIG_USB_ACM is not set
> > # CONFIG_USB_PRINTER is not set
> > CONFIG_USB_HID=m
> > # CONFIG_USB_KBD is not set
> > # CONFIG_USB_MOUSE is not set
> > # CONFIG_USB_WACOM is not set
> > CONFIG_USB_DC2XX=m
> > # CONFIG_USB_MDC800 is not set
> > # CONFIG_USB_SCANNER is not set
> > # CONFIG_USB_MICROTEK is not set
> > # CONFIG_USB_IBMCAM is not set
> > # CONFIG_USB_OV511 is not set
> > # CONFIG_USB_DSBR is not set
> > # CONFIG_USB_DABUSB is not set
> > # CONFIG_USB_PLUSB is not set
> > # CONFIG_USB_PEGASUS is not set
> > # CONFIG_USB_NET1080 is not set
> > # CONFIG_USB_USS720 is not set
> > 
> > #
> > # USB Serial Converter support
> > #
> > # CONFIG_USB_SERIAL is not set
> > # CONFIG_USB_RIO500 is not set
> > 
> > #
> > # Kernel hacking
> > #
> > CONFIG_MAGIC_SYSRQ=y
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo@vger.kernel.org
> > Please read the FAQ at http://www.tux.org/lkml/
> > 

-- 
     ======--------         Marcel J.E. Mol                MESA Consulting B.V.
    =======---------        ph. +31-(0)6-54724868          P.O. Box 112
    =======---------        marcel@mesa.nl                 2630 AC  Nootdorp
__==== www.mesa.nl ---____U_n_i_x______I_n_t_e_r_n_e_t____ The Netherlands ____
 They couldn't think of a number, so they gave me a name!
                                -- Rupert Hine       http://www.ruperthine.com/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: Matrox G450 problems with 2.4.0 and xfree
@ 2001-01-31  0:30 Petr Vandrovec
  0 siblings, 0 replies; 11+ messages in thread
From: Petr Vandrovec @ 2001-01-31  0:30 UTC (permalink / raw)
  To: Marcel J.E. Mol; +Cc: linux-kernel, tcl

On 31 Jan 01 at 0:06, Marcel J.E. Mol wrote:

> > > Installed a Matrox G450 on my linux system. Now it has problems
> > > booting. The kernel is compiled with framebuffer support so is supposed
> > > to boot up with the Linux logo. Unfortunately the systems hangs when 
> > > the kernel switches to the graphics mode. When I first boot into windoze
> > > and the reboot to linux it works fine. So it looks like an
> > > initialisation problem...

Well, first to problem with G450. I was trying very hard to find what's
wrong, last few weeks together with guys from some other OSes (I'm
not sure if I can mention them publicaly) and we were not able to find
what's wrong - and without datasheets we hardly can.

Problem is that sometime G450 is in strange state, where doing accelerated
operations which does both read and write (not simple fill) locks
accelerator. Windows drivers works around somehow, as after booting
to Windows matroxfb works fine - but without Windows it is just pure luck.
You can try powering off your box again and again - and sometime
it will boot, and from this time it will boot always until you poweroff
computer.

It looks like that if you compile 'agpgart' into kernel, chances that it
will work are better, but I have also reports that it did not changed
anything.

So currently I do not know. Only 100% safe way I know is booting with
'video=matrox:noaccel' - but at cost of completely disabled acceleration.
And if you'll start accelerated X with non-matrox mga driver (and with 
'Option "UseFBDev"', of course) on such hardware, your computer locks 
again...

> On Tue, Jan 30, 2001 at 04:53:45PM -0500, tc lewis wrote:
> > 
> > try the latest driver that matrox provides.  i had to do this with just a
> > stock redhat 7.0 system.  i don't think the standard kernel distributions
> > redhat packages use a driver that knows about the 450 yet.
> > 
> > http://www.matrox.com/mga/support/drivers/files/linux_04.cfm
> 
> In the G400 time I tried the 1.0.1, 1.0.3 and 1.0.4 matrox driver
> with XFree 4.0.1 but only 1.0.1 worked. After installing XFree 4.0.2
> I get the same results (the matrox drivers are build for XFree 4.0.1
> but I guess the should work for 4.0.2 to as they are 'modules'...).

I'm currently using Matrox driver 1.0.4 and XF 4.0.2 with 
'Options "UseFBDev"' and 'Options "HWCursor" "off"' - I'm using 'UseFBDev'
because of I want to manage first/second head by hand (matroxset) and
not by XFree.

You can get it to work with xfree mga driver too (using usefbdev), but 
mga driver in XF4.0.2 ignores usefbdev option when using DGA - so for
VMware you need mga driver from Matrox, anything else fails...

> > > Previously I had a matrox G400 card and that worked without any problems.
> > > 
> > > Also xfree fails when using the svga module (Xfree 4.0.2). When using the
> > > fbdev module it works fine. Again, using the G400 card works fine with svga
> > > module.
> > > 
> > > And yes, it really is a G450!

Revision >= 80 => G450 : G400, DDRAM memory interface, different VCO, 
                         better dualhead... And probably another BES
                         used by CRTC2 in TVOut mode...

                                                Best regards,
                                                    Petr Vandrovec
                                                    vandrove@vc.cvut.cz

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: Matrox G450 problems with 2.4.0 and xfree
  2001-01-30 21:43 Marcel J.E. Mol
  2001-01-30 21:53 ` tc lewis
@ 2001-01-31  8:44 ` David Woodhouse
  2001-01-31  8:50   ` Marcel J.E. Mol
  1 sibling, 1 reply; 11+ messages in thread
From: David Woodhouse @ 2001-01-31  8:44 UTC (permalink / raw)
  To: Marcel J.E. Mol; +Cc: linux-kernel

On Tue, 30 Jan 2001, Marcel J.E. Mol wrote:

> Installed a Matrox G450 on my linux system. Now it has problems
> booting.
> 
> Previously I had a matrox G400 card and that worked without any problems.
> 
> Below follows .config for the 2.4.0 kernel.
> 
> # CONFIG_FB_MATROX_G450 is not set

--
dwmw2


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: Matrox G450 problems with 2.4.0 and xfree
  2001-01-31  8:44 ` David Woodhouse
@ 2001-01-31  8:50   ` Marcel J.E. Mol
  0 siblings, 0 replies; 11+ messages in thread
From: Marcel J.E. Mol @ 2001-01-31  8:50 UTC (permalink / raw)
  To: David Woodhouse; +Cc: linux-kernel

On Wed, Jan 31, 2001 at 08:44:17AM +0000, David Woodhouse wrote:
> On Tue, 30 Jan 2001, Marcel J.E. Mol wrote:
> 
> > Installed a Matrox G450 on my linux system. Now it has problems
> > booting.
> > 
> > Previously I had a matrox G400 card and that worked without any problems.
> > 
> > Below follows .config for the 2.4.0 kernel.
> > 
> > # CONFIG_FB_MATROX_G450 is not set
> 
> --
> dwmw2

This is for dualhead support on G450. But anmyway i did try setting it and
it did not help.

-Marcel
-- 
     ======--------         Marcel J.E. Mol                MESA Consulting B.V.
    =======---------        ph. +31-(0)6-54724868          P.O. Box 112
    =======---------        marcel@mesa.nl                 2630 AC  Nootdorp
__==== www.mesa.nl ---____U_n_i_x______I_n_t_e_r_n_e_t____ The Netherlands ____
 They couldn't think of a number, so they gave me a name!
                                -- Rupert Hine       http://www.ruperthine.com/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: Matrox G450 problems with 2.4.0 and xfree
@ 2001-01-31 12:17 Petr Vandrovec
  0 siblings, 0 replies; 11+ messages in thread
From: Petr Vandrovec @ 2001-01-31 12:17 UTC (permalink / raw)
  To: David Woodhouse; +Cc: linux-kernel, marcel

On 31 Jan 01 at 8:44, David Woodhouse wrote:
> On Tue, 30 Jan 2001, Marcel J.E. Mol wrote:
> 
> > Installed a Matrox G450 on my linux system. Now it has problems
> > booting.
> > 
> > Previously I had a matrox G400 card and that worked without any problems.
> > 
> > Below follows .config for the 2.4.0 kernel.
> > 
> > # CONFIG_FB_MATROX_G450 is not set

It is only for secondary head support - and all code which is guarded
by this define is executed after lockup occurs, so no, it is not the 
reason why it works / does not work...

If it helped you, I think that rule (4) from my another posting
applies to you - you are just lucky...

I asked matrox devrel again, but no answer. And linking matroxfb with 
512KB binary-only mgaHALlib.a is unacceptable personally for me, not
even talking about license issues... (and not talking about technical
problems with getting mgaHALlib to work in kernel environment...)
                                                Best regards,
                                                    Petr Vandrovec
                                                    vandrove@vc.cvut.cz
                                                    
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: Matrox G450 problems with 2.4.0 and xfree
@ 2001-01-31 17:41 J Brook
  0 siblings, 0 replies; 11+ messages in thread
From: J Brook @ 2001-01-31 17:41 UTC (permalink / raw)
  To: Petr Vandrovec; +Cc: linux-kernel

Dear Petr,

 I think I might have something to add to this discussion, but then
again you probably know this already!

On Tue Jan 30 2001 Petr Vandrovec wrote:
> > > > Installed a Matrox G450 on my linux system. Now it has
> > > > problems booting. The kernel is compiled with framebuffer
> > > > support so is supposed to boot up with the Linux logo.
> > > > Unfortunately the systems hangs when the kernel switches to
> > > > the graphics mode. When I first boot into windoze and the
> > > > reboot to linux it works fine. So it looks like an
> > > > initialisation problem...

<snip>

> Windows drivers works around somehow, as after booting
> to Windows matroxfb works fine - but without Windows it is just
> pure luck.

 I have a similar problem to the one outlined above with kernel 2.4.x
(hardware details below).

 I don't have Windows installed on my machine, but I find that if I
cold boot to 2.2 (RH7) first and start up X (4.0.2 with Matrox driver
1.00.04 compiled in), I am then able to "shutdown -r now" and warm
restart to 2.4 with FB acceleration enabled. This generally works
fine
for me.

 The 2.2 kernel I have (2.2.16 Redhat 7.0 standard) does not have FB
enabled

 This isn't generally too much of a problem because 2.4.x is so
stable
I don't have to reboot for weeks!

> It looks like that if you compile 'agpgart' into kernel, chances
> that it will work are better, but I have also reports that it did
> not changed anything.

 I have agpgart compiled directly in (not as a module) to the kernel,
but this does not seem to relieve any of the cold boot problems :-(

 I'm willing to try out some patches if that would be useful.

Note: Please CC me as I'm not subscribed to l-k.


My hardware is:
  Matrox G450
  Duron 750
  128 Mb Ram
  Aopen AK33 m/b with VIA KT133 / 686A chipset

relevant lspci output:

01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP
(rev 82) (prog-if 00 [VGA])
	Subsystem: Matrox Graphics, Inc.: Unknown device 0641
	Flags: bus master, medium devsel, latency 64, IRQ 10
	Memory at d8000000 (32-bit, prefetchable) [size=32M]
	Memory at da000000 (32-bit, non-prefetchable) [size=16K]
	Memory at db000000 (32-bit, non-prefetchable) [size=8M]
	Expansion ROM at <unassigned> [disabled] [size=128K]
	Capabilities: [dc] Power Management version 2
	Capabilities: [f0] AGP version 2.0

    John
----------------
jbk@postmark.net


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: Matrox G450 problems with 2.4.0 and xfree
@ 2001-01-31 17:54 Petr Vandrovec
  2001-02-06 18:16 ` Mike A. Harris
  0 siblings, 1 reply; 11+ messages in thread
From: Petr Vandrovec @ 2001-01-31 17:54 UTC (permalink / raw)
  To: J Brook; +Cc: linux-kernel

On 31 Jan 01 at 17:41, J Brook wrote:
> 
>  I don't have Windows installed on my machine, but I find that if I
> cold boot to 2.2 (RH7) first and start up X (4.0.2 with Matrox driver
> 1.00.04 compiled in), I am then able to "shutdown -r now" and warm

Yes, they use same secret code... At least I think...

> restart to 2.4 with FB acceleration enabled. This generally works
> fine for me.
> 
>  This isn't generally too much of a problem because 2.4.x is so
> stable
> I don't have to reboot for weeks!

You can reboot any number of times you want. Just do not unplug
powercord from computer...
 
>  I'm willing to try out some patches if that would be useful.

Problem is that I really do not have any idea what's wrong - as
after any change I do to driver, I cannot know for sure whether
after boot it works because of I worked around some problem, or
because of hardware powered up in `correct' state...
                                            Best regards,
                                                Petr Vandrovec
                                                vandrove@vc.cvut.cz
                                                
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: Matrox G450 problems with 2.4.0 and xfree
  2001-01-31 17:54 Petr Vandrovec
@ 2001-02-06 18:16 ` Mike A. Harris
  0 siblings, 0 replies; 11+ messages in thread
From: Mike A. Harris @ 2001-02-06 18:16 UTC (permalink / raw)
  To: Petr Vandrovec; +Cc: J Brook, linux-kernel

On Wed, 31 Jan 2001, Petr Vandrovec wrote:

>>  I don't have Windows installed on my machine, but I find that if I
>> cold boot to 2.2 (RH7) first and start up X (4.0.2 with Matrox driver
>> 1.00.04 compiled in), I am then able to "shutdown -r now" and warm
>
>Yes, they use same secret code... At least I think...

Are you refering to Windows or Red Hat Linux?  I can assure you
that Red Hat Linux's XFree package doesn't have any secret code
in it with 110% certainty.  Nor will it have in the future.

Binary only modules are not acceptable in Red Hat Linux and I
will not include them in XFree86 unless forced at gunpoint.




----------------------------------------------------------------------
    Mike A. Harris  -  Linux advocate  -  Free Software advocate
          This message is copyright 2001, all rights reserved.
  Views expressed are my own, not necessarily shared by my employer.
----------------------------------------------------------------------
"If it isn't source, it isn't software."  -- NASA

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: Matrox G450 problems with 2.4.0 and xfree
@ 2001-02-06 19:21 Petr Vandrovec
  0 siblings, 0 replies; 11+ messages in thread
From: Petr Vandrovec @ 2001-02-06 19:21 UTC (permalink / raw)
  To: Mike A. Harris; +Cc: J Brook, linux-kernel

On  6 Feb 01 at 13:16, Mike A. Harris wrote:
> On Wed, 31 Jan 2001, Petr Vandrovec wrote:
> 
> >>  I don't have Windows installed on my machine, but I find that if I
> >> cold boot to 2.2 (RH7) first and start up X (4.0.2 with Matrox driver
                                                             ^^^^^^^^^^^^^
> >> 1.00.04 compiled in), I am then able to "shutdown -r now" and warm
     ^^^^^^^^^^^^^^^^^^^
> >
> >Yes, they use same secret code... At least I think...
> 
> Are you refering to Windows or Red Hat Linux?  I can assure you
> that Red Hat Linux's XFree package doesn't have any secret code
> in it with 110% certainty.  Nor will it have in the future.

He is using XF4.0.2 with Matrox large-blob driver, not with XFree one.
I'm 111% sure that this module contains code which is not freely 
available to mortals.

XFree4.0.2 mga driver does not work with G450 at all. I'm not sure whether
you (or RedHat) applied G450 patches flying around. But it is still first
head only, no digital LCD...
                                    Best regards,
                                        Petr Vandrovec
                                        vandrove@vc.cvut.cz


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

^ permalink raw reply	[flat|nested] 11+ messages in thread

end of thread, other threads:[~2001-02-06 18:23 UTC | newest]

Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-01-31  0:30 Matrox G450 problems with 2.4.0 and xfree Petr Vandrovec
  -- strict thread matches above, loose matches on Subject: below --
2001-02-06 19:21 Petr Vandrovec
2001-01-31 17:54 Petr Vandrovec
2001-02-06 18:16 ` Mike A. Harris
2001-01-31 17:41 J Brook
2001-01-31 12:17 Petr Vandrovec
2001-01-30 21:43 Marcel J.E. Mol
2001-01-30 21:53 ` tc lewis
2001-01-30 23:06   ` Marcel J.E. Mol
2001-01-31  8:44 ` David Woodhouse
2001-01-31  8:50   ` Marcel J.E. Mol

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox