From: Stephane Viau <sviau@codeaurora.org>
To: dri-devel@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
robdclark@gmail.com, Stephane Viau <sviau@codeaurora.org>
Subject: [PATCH 1/3] drm/msm/hdmi: use dynamic allocation for hdmi resources
Date: Wed, 7 Jan 2015 16:27:25 -0500 [thread overview]
Message-ID: <1420666047-3690-2-git-send-email-sviau@codeaurora.org> (raw)
In-Reply-To: <1420666047-3690-1-git-send-email-sviau@codeaurora.org>
Instead of reporting BUG_ON when resources arrays are not
dimensioned correctly, this patch does a dynamic allocation of
these arrays. This is needed for the following patches that add a
regulator for a new target.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
---
drivers/gpu/drm/msm/hdmi/hdmi.c | 33 +++++++++++++++++++++++++++++----
drivers/gpu/drm/msm/hdmi/hdmi.h | 8 ++++----
2 files changed, 33 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index 062c687..a9092d6 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -65,6 +65,11 @@ static void hdmi_destroy(struct hdmi *hdmi)
if (hdmi->i2c)
hdmi_i2c_destroy(hdmi->i2c);
+ devm_kfree(&hdmi->pdev->dev, hdmi->pwr_clks);
+ devm_kfree(&hdmi->pdev->dev, hdmi->hpd_clks);
+ devm_kfree(&hdmi->pdev->dev, hdmi->pwr_regs);
+ devm_kfree(&hdmi->pdev->dev, hdmi->hpd_regs);
+
platform_set_drvdata(hdmi->pdev, NULL);
}
@@ -106,7 +111,12 @@ static struct hdmi *hdmi_init(struct platform_device *pdev)
goto fail;
}
- BUG_ON(config->hpd_reg_cnt > ARRAY_SIZE(hdmi->hpd_regs));
+ hdmi->hpd_regs = devm_kzalloc(&pdev->dev, sizeof(hdmi->hpd_regs[0]) *
+ config->hpd_reg_cnt, GFP_KERNEL);
+ if (!hdmi->hpd_regs) {
+ ret = -ENOMEM;
+ goto fail;
+ }
for (i = 0; i < config->hpd_reg_cnt; i++) {
struct regulator *reg;
@@ -122,7 +132,12 @@ static struct hdmi *hdmi_init(struct platform_device *pdev)
hdmi->hpd_regs[i] = reg;
}
- BUG_ON(config->pwr_reg_cnt > ARRAY_SIZE(hdmi->pwr_regs));
+ hdmi->pwr_regs = devm_kzalloc(&pdev->dev, sizeof(hdmi->pwr_regs[0]) *
+ config->pwr_reg_cnt, GFP_KERNEL);
+ if (!hdmi->pwr_regs) {
+ ret = -ENOMEM;
+ goto fail;
+ }
for (i = 0; i < config->pwr_reg_cnt; i++) {
struct regulator *reg;
@@ -138,7 +153,12 @@ static struct hdmi *hdmi_init(struct platform_device *pdev)
hdmi->pwr_regs[i] = reg;
}
- BUG_ON(config->hpd_clk_cnt > ARRAY_SIZE(hdmi->hpd_clks));
+ hdmi->hpd_clks = devm_kzalloc(&pdev->dev, sizeof(hdmi->hpd_clks[0]) *
+ config->hpd_clk_cnt, GFP_KERNEL);
+ if (!hdmi->hpd_clks) {
+ ret = -ENOMEM;
+ goto fail;
+ }
for (i = 0; i < config->hpd_clk_cnt; i++) {
struct clk *clk;
@@ -153,7 +173,12 @@ static struct hdmi *hdmi_init(struct platform_device *pdev)
hdmi->hpd_clks[i] = clk;
}
- BUG_ON(config->pwr_clk_cnt > ARRAY_SIZE(hdmi->pwr_clks));
+ hdmi->pwr_clks = devm_kzalloc(&pdev->dev, sizeof(hdmi->pwr_clks[0]) *
+ config->pwr_clk_cnt, GFP_KERNEL);
+ if (!hdmi->pwr_clks) {
+ ret = -ENOMEM;
+ goto fail;
+ }
for (i = 0; i < config->pwr_clk_cnt; i++) {
struct clk *clk;
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.h b/drivers/gpu/drm/msm/hdmi/hdmi.h
index 43e654f..9973e03 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.h
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.h
@@ -52,10 +52,10 @@ struct hdmi {
void __iomem *mmio;
- struct regulator *hpd_regs[2];
- struct regulator *pwr_regs[2];
- struct clk *hpd_clks[3];
- struct clk *pwr_clks[2];
+ struct regulator **hpd_regs;
+ struct regulator **pwr_regs;
+ struct clk **hpd_clks;
+ struct clk **pwr_clks;
struct hdmi_phy *phy;
struct i2c_adapter *i2c;
--
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2015-01-07 21:27 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-07 21:27 [PATCH 0/3] drm/msm: Add power supplies config for apq8084 Stephane Viau
2015-01-07 21:27 ` Stephane Viau [this message]
2015-01-13 19:33 ` [PATCH RESEND] drm/msm/hdmi: use dynamic allocation for hdmi resources Stephane Viau
2015-01-07 21:27 ` [PATCH 2/3] drm/msm/hdmi: Add HDMI platform config for apq8084 Stephane Viau
2015-01-07 21:27 ` [PATCH 3/3] drm/msm/hdmi: rework hdmi configurations, using dt_match[] Stephane Viau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1420666047-3690-2-git-send-email-sviau@codeaurora.org \
--to=sviau@codeaurora.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robdclark@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox