public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
* [PATCH 0/3] drm/msm: Add power supplies config for apq8084
@ 2015-01-07 21:27 Stephane Viau
  2015-01-07 21:27 ` [PATCH 1/3] drm/msm/hdmi: use dynamic allocation for hdmi resources Stephane Viau
                   ` (2 more replies)
  0 siblings, 3 replies; 5+ messages in thread
From: Stephane Viau @ 2015-01-07 21:27 UTC (permalink / raw)
  To: dri-devel; +Cc: linux-arm-msm, linux-kernel, robdclark, Stephane Viau

The first patch makes it easier to have a different number of regulators
depending on the target. It is followed by the addition of the apq8084's
regulator config. Finally, the last patch makes things easier when a new
device needs to be added, especially when they share the same information.

Stephane Viau (3):
  drm/msm/hdmi: use dynamic allocation for hdmi resources
  drm/msm/hdmi: Add HDMI platform config for apq8084
  drm/msm/hdmi: rework hdmi configurations, using dt_match[]

 Documentation/devicetree/bindings/drm/msm/hdmi.txt |   2 +
 drivers/gpu/drm/msm/hdmi/hdmi.c                    | 144 ++++++++++++++-------
 drivers/gpu/drm/msm/hdmi/hdmi.h                    |   8 +-
 3 files changed, 105 insertions(+), 49 deletions(-)

-- 
Qualcomm Innovation Center, Inc.

The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH 1/3] drm/msm/hdmi: use dynamic allocation for hdmi resources
  2015-01-07 21:27 [PATCH 0/3] drm/msm: Add power supplies config for apq8084 Stephane Viau
@ 2015-01-07 21:27 ` Stephane Viau
  2015-01-13 19:33   ` [PATCH RESEND] " Stephane Viau
  2015-01-07 21:27 ` [PATCH 2/3] drm/msm/hdmi: Add HDMI platform config for apq8084 Stephane Viau
  2015-01-07 21:27 ` [PATCH 3/3] drm/msm/hdmi: rework hdmi configurations, using dt_match[] Stephane Viau
  2 siblings, 1 reply; 5+ messages in thread
From: Stephane Viau @ 2015-01-07 21:27 UTC (permalink / raw)
  To: dri-devel; +Cc: linux-arm-msm, linux-kernel, robdclark, Stephane Viau

Instead of reporting BUG_ON when resources arrays are not
dimensioned correctly, this patch does a dynamic allocation of
these arrays. This is needed for the following patches that add a
regulator for a new target.

Signed-off-by: Stephane Viau <sviau@codeaurora.org>
---
 drivers/gpu/drm/msm/hdmi/hdmi.c | 33 +++++++++++++++++++++++++++++----
 drivers/gpu/drm/msm/hdmi/hdmi.h |  8 ++++----
 2 files changed, 33 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index 062c687..a9092d6 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -65,6 +65,11 @@ static void hdmi_destroy(struct hdmi *hdmi)
 	if (hdmi->i2c)
 		hdmi_i2c_destroy(hdmi->i2c);
 
+	devm_kfree(&hdmi->pdev->dev, hdmi->pwr_clks);
+	devm_kfree(&hdmi->pdev->dev, hdmi->hpd_clks);
+	devm_kfree(&hdmi->pdev->dev, hdmi->pwr_regs);
+	devm_kfree(&hdmi->pdev->dev, hdmi->hpd_regs);
+
 	platform_set_drvdata(hdmi->pdev, NULL);
 }
 
@@ -106,7 +111,12 @@ static struct hdmi *hdmi_init(struct platform_device *pdev)
 		goto fail;
 	}
 
-	BUG_ON(config->hpd_reg_cnt > ARRAY_SIZE(hdmi->hpd_regs));
+	hdmi->hpd_regs = devm_kzalloc(&pdev->dev, sizeof(hdmi->hpd_regs[0]) *
+			config->hpd_reg_cnt, GFP_KERNEL);
+	if (!hdmi->hpd_regs) {
+		ret = -ENOMEM;
+		goto fail;
+	}
 	for (i = 0; i < config->hpd_reg_cnt; i++) {
 		struct regulator *reg;
 
@@ -122,7 +132,12 @@ static struct hdmi *hdmi_init(struct platform_device *pdev)
 		hdmi->hpd_regs[i] = reg;
 	}
 
-	BUG_ON(config->pwr_reg_cnt > ARRAY_SIZE(hdmi->pwr_regs));
+	hdmi->pwr_regs = devm_kzalloc(&pdev->dev, sizeof(hdmi->pwr_regs[0]) *
+			config->pwr_reg_cnt, GFP_KERNEL);
+	if (!hdmi->pwr_regs) {
+		ret = -ENOMEM;
+		goto fail;
+	}
 	for (i = 0; i < config->pwr_reg_cnt; i++) {
 		struct regulator *reg;
 
@@ -138,7 +153,12 @@ static struct hdmi *hdmi_init(struct platform_device *pdev)
 		hdmi->pwr_regs[i] = reg;
 	}
 
-	BUG_ON(config->hpd_clk_cnt > ARRAY_SIZE(hdmi->hpd_clks));
+	hdmi->hpd_clks = devm_kzalloc(&pdev->dev, sizeof(hdmi->hpd_clks[0]) *
+			config->hpd_clk_cnt, GFP_KERNEL);
+	if (!hdmi->hpd_clks) {
+		ret = -ENOMEM;
+		goto fail;
+	}
 	for (i = 0; i < config->hpd_clk_cnt; i++) {
 		struct clk *clk;
 
@@ -153,7 +173,12 @@ static struct hdmi *hdmi_init(struct platform_device *pdev)
 		hdmi->hpd_clks[i] = clk;
 	}
 
-	BUG_ON(config->pwr_clk_cnt > ARRAY_SIZE(hdmi->pwr_clks));
+	hdmi->pwr_clks = devm_kzalloc(&pdev->dev, sizeof(hdmi->pwr_clks[0]) *
+			config->pwr_clk_cnt, GFP_KERNEL);
+	if (!hdmi->pwr_clks) {
+		ret = -ENOMEM;
+		goto fail;
+	}
 	for (i = 0; i < config->pwr_clk_cnt; i++) {
 		struct clk *clk;
 
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.h b/drivers/gpu/drm/msm/hdmi/hdmi.h
index 43e654f..9973e03 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.h
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.h
@@ -52,10 +52,10 @@ struct hdmi {
 
 	void __iomem *mmio;
 
-	struct regulator *hpd_regs[2];
-	struct regulator *pwr_regs[2];
-	struct clk *hpd_clks[3];
-	struct clk *pwr_clks[2];
+	struct regulator **hpd_regs;
+	struct regulator **pwr_regs;
+	struct clk **hpd_clks;
+	struct clk **pwr_clks;
 
 	struct hdmi_phy *phy;
 	struct i2c_adapter *i2c;
-- 
Qualcomm Innovation Center, Inc.

The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project


^ permalink raw reply related	[flat|nested] 5+ messages in thread

* [PATCH 2/3] drm/msm/hdmi: Add HDMI platform config for apq8084
  2015-01-07 21:27 [PATCH 0/3] drm/msm: Add power supplies config for apq8084 Stephane Viau
  2015-01-07 21:27 ` [PATCH 1/3] drm/msm/hdmi: use dynamic allocation for hdmi resources Stephane Viau
@ 2015-01-07 21:27 ` Stephane Viau
  2015-01-07 21:27 ` [PATCH 3/3] drm/msm/hdmi: rework hdmi configurations, using dt_match[] Stephane Viau
  2 siblings, 0 replies; 5+ messages in thread
From: Stephane Viau @ 2015-01-07 21:27 UTC (permalink / raw)
  To: dri-devel; +Cc: linux-arm-msm, linux-kernel, robdclark, Stephane Viau

This change add the regulator/clock configuration for MDP5 v1.3.
This config is close to the one already existing for 8x74, except
that one more regulator is needed (hpd-5v-en).

Signed-off-by: Stephane Viau <sviau@codeaurora.org>
---
 Documentation/devicetree/bindings/drm/msm/hdmi.txt |  1 +
 drivers/gpu/drm/msm/hdmi/hdmi.c                    | 17 +++++++++++++++++
 2 files changed, 18 insertions(+)

diff --git a/Documentation/devicetree/bindings/drm/msm/hdmi.txt b/Documentation/devicetree/bindings/drm/msm/hdmi.txt
index aca917f..c25d5aa 100644
--- a/Documentation/devicetree/bindings/drm/msm/hdmi.txt
+++ b/Documentation/devicetree/bindings/drm/msm/hdmi.txt
@@ -2,6 +2,7 @@ Qualcomm adreno/snapdragon hdmi output
 
 Required properties:
 - compatible: one of the following
+   * "qcom,hdmi-tx-8084"
    * "qcom,hdmi-tx-8660"
    * "qcom,hdmi-tx-8960"
 - reg: Physical base address and length of the controller's registers
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index a9092d6..c2fe4fa 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -334,6 +334,22 @@ static int hdmi_bind(struct device *dev, struct device *master, void *data)
 		config.hpd_clk_cnt   = ARRAY_SIZE(hpd_clk_names);
 		config.pwr_clk_names = pwr_clk_names;
 		config.pwr_clk_cnt   = ARRAY_SIZE(pwr_clk_names);
+	} else if (of_device_is_compatible(of_node, "qcom,hdmi-tx-8084")) {
+		static const char *hpd_reg_names[] = {"hpd-gdsc", "hpd-5v", "hpd-5v-en"};
+		static const char *pwr_reg_names[] = {"core-vdda", "core-vcc"};
+		static const char *hpd_clk_names[] = {"iface_clk", "core_clk", "mdp_core_clk"};
+		static unsigned long hpd_clk_freq[] = {0, 19200000, 0};
+		static const char *pwr_clk_names[] = {"extp_clk", "alt_iface_clk"};
+		config.phy_init      = hdmi_phy_8x74_init;
+		config.hpd_reg_names = hpd_reg_names;
+		config.hpd_reg_cnt   = ARRAY_SIZE(hpd_reg_names);
+		config.pwr_reg_names = pwr_reg_names;
+		config.pwr_reg_cnt   = ARRAY_SIZE(pwr_reg_names);
+		config.hpd_clk_names = hpd_clk_names;
+		config.hpd_freq      = hpd_clk_freq;
+		config.hpd_clk_cnt   = ARRAY_SIZE(hpd_clk_names);
+		config.pwr_clk_names = pwr_clk_names;
+		config.pwr_clk_cnt   = ARRAY_SIZE(pwr_clk_names);
 	} else if (of_device_is_compatible(of_node, "qcom,hdmi-tx-8960")) {
 		static const char *hpd_clk_names[] = {"core_clk", "master_iface_clk", "slave_iface_clk"};
 		static const char *hpd_reg_names[] = {"core-vdda", "hdmi-mux"};
@@ -439,6 +455,7 @@ static int hdmi_dev_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id dt_match[] = {
+	{ .compatible = "qcom,hdmi-tx-8084" },
 	{ .compatible = "qcom,hdmi-tx-8074" },
 	{ .compatible = "qcom,hdmi-tx-8960" },
 	{ .compatible = "qcom,hdmi-tx-8660" },
-- 
Qualcomm Innovation Center, Inc.

The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project


^ permalink raw reply related	[flat|nested] 5+ messages in thread

* [PATCH 3/3] drm/msm/hdmi: rework hdmi configurations, using dt_match[]
  2015-01-07 21:27 [PATCH 0/3] drm/msm: Add power supplies config for apq8084 Stephane Viau
  2015-01-07 21:27 ` [PATCH 1/3] drm/msm/hdmi: use dynamic allocation for hdmi resources Stephane Viau
  2015-01-07 21:27 ` [PATCH 2/3] drm/msm/hdmi: Add HDMI platform config for apq8084 Stephane Viau
@ 2015-01-07 21:27 ` Stephane Viau
  2 siblings, 0 replies; 5+ messages in thread
From: Stephane Viau @ 2015-01-07 21:27 UTC (permalink / raw)
  To: dri-devel; +Cc: linux-arm-msm, linux-kernel, robdclark, Stephane Viau

In the same idea mdp5_cfg was added, this change allows us to quickly
add new instances, such as apq8084's HDMI in this case.

Signed-off-by: Stephane Viau <sviau@codeaurora.org>
---
 Documentation/devicetree/bindings/drm/msm/hdmi.txt |   1 +
 drivers/gpu/drm/msm/hdmi/hdmi.c                    | 128 +++++++++++----------
 2 files changed, 71 insertions(+), 58 deletions(-)

diff --git a/Documentation/devicetree/bindings/drm/msm/hdmi.txt b/Documentation/devicetree/bindings/drm/msm/hdmi.txt
index c25d5aa..a29a55f 100644
--- a/Documentation/devicetree/bindings/drm/msm/hdmi.txt
+++ b/Documentation/devicetree/bindings/drm/msm/hdmi.txt
@@ -3,6 +3,7 @@ Qualcomm adreno/snapdragon hdmi output
 Required properties:
 - compatible: one of the following
    * "qcom,hdmi-tx-8084"
+   * "qcom,hdmi-tx-8074"
    * "qcom,hdmi-tx-8660"
    * "qcom,hdmi-tx-8960"
 - reg: Physical base address and length of the controller's registers
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index c2fe4fa..36a12ee 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -1,4 +1,5 @@
 /*
+ * Copyright (c) 2014 The Linux Foundation. All rights reserved.
  * Copyright (C) 2013 Red Hat
  * Author: Rob Clark <robdclark@gmail.com>
  *
@@ -291,6 +292,57 @@ fail:
 
 #include <linux/of_gpio.h>
 
+#define HDMI_CFG(item, entry) \
+	.item ## _names = item ##_names_ ## entry, \
+	.item ## _cnt   = ARRAY_SIZE(item ## _names_ ## entry)
+
+static struct hdmi_platform_config hdmi_tx_8660_config = {
+		.phy_init = hdmi_phy_8x60_init,
+};
+
+static const char *hpd_reg_names_8960[] = {"core-vdda", "hdmi-mux"};
+static const char *hpd_clk_names_8960[] = {"core_clk", "master_iface_clk", "slave_iface_clk"};
+
+static struct hdmi_platform_config hdmi_tx_8960_config = {
+		.phy_init = hdmi_phy_8960_init,
+		HDMI_CFG(hpd_reg, 8960),
+		HDMI_CFG(hpd_clk, 8960),
+};
+
+static const char *pwr_reg_names_8x74[] = {"core-vdda", "core-vcc"};
+static const char *hpd_reg_names_8x74[] = {"hpd-gdsc", "hpd-5v"};
+static const char *pwr_clk_names_8x74[] = {"extp_clk", "alt_iface_clk"};
+static const char *hpd_clk_names_8x74[] = {"iface_clk", "core_clk", "mdp_core_clk"};
+static unsigned long hpd_clk_freq_8x74[] = {0, 19200000, 0};
+
+static struct hdmi_platform_config hdmi_tx_8074_config = {
+		.phy_init = hdmi_phy_8x74_init,
+		HDMI_CFG(pwr_reg, 8x74),
+		HDMI_CFG(hpd_reg, 8x74),
+		HDMI_CFG(pwr_clk, 8x74),
+		HDMI_CFG(hpd_clk, 8x74),
+		.hpd_freq      = hpd_clk_freq_8x74,
+};
+
+static const char *hpd_reg_names_8084[] = {"hpd-gdsc", "hpd-5v", "hpd-5v-en"};
+
+static struct hdmi_platform_config hdmi_tx_8084_config = {
+		.phy_init = hdmi_phy_8x74_init,
+		HDMI_CFG(pwr_reg, 8x74),
+		HDMI_CFG(hpd_reg, 8084),
+		HDMI_CFG(pwr_clk, 8x74),
+		HDMI_CFG(hpd_clk, 8x74),
+		.hpd_freq      = hpd_clk_freq_8x74,
+};
+
+static const struct of_device_id dt_match[] = {
+	{ .compatible = "qcom,hdmi-tx-8084", .data = &hdmi_tx_8084_config },
+	{ .compatible = "qcom,hdmi-tx-8074", .data = &hdmi_tx_8074_config },
+	{ .compatible = "qcom,hdmi-tx-8960", .data = &hdmi_tx_8960_config },
+	{ .compatible = "qcom,hdmi-tx-8660", .data = &hdmi_tx_8660_config },
+	{}
+};
+
 #ifdef CONFIG_OF
 static int get_gpio(struct device *dev, struct device_node *of_node, const char *name)
 {
@@ -314,63 +366,28 @@ static int hdmi_bind(struct device *dev, struct device *master, void *data)
 	struct drm_device *drm = dev_get_drvdata(master);
 	struct msm_drm_private *priv = drm->dev_private;
 	static struct hdmi_platform_config config = {};
+	static struct hdmi_platform_config *hdmi_cfg;
 	struct hdmi *hdmi;
 #ifdef CONFIG_OF
 	struct device_node *of_node = dev->of_node;
+	const struct of_device_id *match;
 
-	if (of_device_is_compatible(of_node, "qcom,hdmi-tx-8074")) {
-		static const char *hpd_reg_names[] = {"hpd-gdsc", "hpd-5v"};
-		static const char *pwr_reg_names[] = {"core-vdda", "core-vcc"};
-		static const char *hpd_clk_names[] = {"iface_clk", "core_clk", "mdp_core_clk"};
-		static unsigned long hpd_clk_freq[] = {0, 19200000, 0};
-		static const char *pwr_clk_names[] = {"extp_clk", "alt_iface_clk"};
-		config.phy_init      = hdmi_phy_8x74_init;
-		config.hpd_reg_names = hpd_reg_names;
-		config.hpd_reg_cnt   = ARRAY_SIZE(hpd_reg_names);
-		config.pwr_reg_names = pwr_reg_names;
-		config.pwr_reg_cnt   = ARRAY_SIZE(pwr_reg_names);
-		config.hpd_clk_names = hpd_clk_names;
-		config.hpd_freq      = hpd_clk_freq;
-		config.hpd_clk_cnt   = ARRAY_SIZE(hpd_clk_names);
-		config.pwr_clk_names = pwr_clk_names;
-		config.pwr_clk_cnt   = ARRAY_SIZE(pwr_clk_names);
-	} else if (of_device_is_compatible(of_node, "qcom,hdmi-tx-8084")) {
-		static const char *hpd_reg_names[] = {"hpd-gdsc", "hpd-5v", "hpd-5v-en"};
-		static const char *pwr_reg_names[] = {"core-vdda", "core-vcc"};
-		static const char *hpd_clk_names[] = {"iface_clk", "core_clk", "mdp_core_clk"};
-		static unsigned long hpd_clk_freq[] = {0, 19200000, 0};
-		static const char *pwr_clk_names[] = {"extp_clk", "alt_iface_clk"};
-		config.phy_init      = hdmi_phy_8x74_init;
-		config.hpd_reg_names = hpd_reg_names;
-		config.hpd_reg_cnt   = ARRAY_SIZE(hpd_reg_names);
-		config.pwr_reg_names = pwr_reg_names;
-		config.pwr_reg_cnt   = ARRAY_SIZE(pwr_reg_names);
-		config.hpd_clk_names = hpd_clk_names;
-		config.hpd_freq      = hpd_clk_freq;
-		config.hpd_clk_cnt   = ARRAY_SIZE(hpd_clk_names);
-		config.pwr_clk_names = pwr_clk_names;
-		config.pwr_clk_cnt   = ARRAY_SIZE(pwr_clk_names);
-	} else if (of_device_is_compatible(of_node, "qcom,hdmi-tx-8960")) {
-		static const char *hpd_clk_names[] = {"core_clk", "master_iface_clk", "slave_iface_clk"};
-		static const char *hpd_reg_names[] = {"core-vdda", "hdmi-mux"};
-		config.phy_init      = hdmi_phy_8960_init;
-		config.hpd_reg_names = hpd_reg_names;
-		config.hpd_reg_cnt   = ARRAY_SIZE(hpd_reg_names);
-		config.hpd_clk_names = hpd_clk_names;
-		config.hpd_clk_cnt   = ARRAY_SIZE(hpd_clk_names);
-	} else if (of_device_is_compatible(of_node, "qcom,hdmi-tx-8660")) {
-		config.phy_init      = hdmi_phy_8x60_init;
+	match = of_match_node(dt_match, of_node);
+	if (match && match->data) {
+		hdmi_cfg = (struct hdmi_platform_config *)match->data;
+		DBG("hdmi phy: %s", match->compatible);
 	} else {
+		hdmi_cfg = &config;
 		dev_err(dev, "unknown phy: %s\n", of_node->name);
 	}
 
-	config.mmio_name     = "core_physical";
-	config.ddc_clk_gpio  = get_gpio(dev, of_node, "qcom,hdmi-tx-ddc-clk");
-	config.ddc_data_gpio = get_gpio(dev, of_node, "qcom,hdmi-tx-ddc-data");
-	config.hpd_gpio      = get_gpio(dev, of_node, "qcom,hdmi-tx-hpd");
-	config.mux_en_gpio   = get_gpio(dev, of_node, "qcom,hdmi-tx-mux-en");
-	config.mux_sel_gpio  = get_gpio(dev, of_node, "qcom,hdmi-tx-mux-sel");
-	config.mux_lpm_gpio  = get_gpio(dev, of_node, "qcom,hdmi-tx-mux-lpm");
+	hdmi_cfg->mmio_name     = "core_physical";
+	hdmi_cfg->ddc_clk_gpio  = get_gpio(dev, of_node, "qcom,hdmi-tx-ddc-clk");
+	hdmi_cfg->ddc_data_gpio = get_gpio(dev, of_node, "qcom,hdmi-tx-ddc-data");
+	hdmi_cfg->hpd_gpio      = get_gpio(dev, of_node, "qcom,hdmi-tx-hpd");
+	hdmi_cfg->mux_en_gpio   = get_gpio(dev, of_node, "qcom,hdmi-tx-mux-en");
+	hdmi_cfg->mux_sel_gpio  = get_gpio(dev, of_node, "qcom,hdmi-tx-mux-sel");
+	hdmi_cfg->mux_lpm_gpio  = get_gpio(dev, of_node, "qcom,hdmi-tx-mux-lpm");
 
 #else
 	static const char *hpd_clk_names[] = {
@@ -418,12 +435,15 @@ static int hdmi_bind(struct device *dev, struct device *master, void *data)
 		config.mux_en_gpio   = -1;
 		config.mux_sel_gpio  = -1;
 	}
+	hdmi_cfg = &config;
 #endif
-	dev->platform_data = &config;
+	dev->platform_data = hdmi_cfg;
+
 	hdmi = hdmi_init(to_platform_device(dev));
 	if (IS_ERR(hdmi))
 		return PTR_ERR(hdmi);
 	priv->hdmi = hdmi;
+
 	return 0;
 }
 
@@ -454,14 +474,6 @@ static int hdmi_dev_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id dt_match[] = {
-	{ .compatible = "qcom,hdmi-tx-8084" },
-	{ .compatible = "qcom,hdmi-tx-8074" },
-	{ .compatible = "qcom,hdmi-tx-8960" },
-	{ .compatible = "qcom,hdmi-tx-8660" },
-	{}
-};
-
 static struct platform_driver hdmi_driver = {
 	.probe = hdmi_dev_probe,
 	.remove = hdmi_dev_remove,
-- 
Qualcomm Innovation Center, Inc.

The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project


^ permalink raw reply related	[flat|nested] 5+ messages in thread

* [PATCH RESEND] drm/msm/hdmi: use dynamic allocation for hdmi resources
  2015-01-07 21:27 ` [PATCH 1/3] drm/msm/hdmi: use dynamic allocation for hdmi resources Stephane Viau
@ 2015-01-13 19:33   ` Stephane Viau
  0 siblings, 0 replies; 5+ messages in thread
From: Stephane Viau @ 2015-01-13 19:33 UTC (permalink / raw)
  To: dri-devel; +Cc: linux-arm-msm, linux-kernel, robdclark, Stephane Viau

Instead of reporting BUG_ON when resources arrays are not
dimensioned correctly, this patch does a dynamic allocation of
these arrays. This is needed for the following patches that add a
regulator for a new target.

Signed-off-by: Stephane Viau <sviau@codeaurora.org>
---
 drivers/gpu/drm/msm/hdmi/hdmi.c | 28 ++++++++++++++++++++++++----
 drivers/gpu/drm/msm/hdmi/hdmi.h |  8 ++++----
 2 files changed, 28 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index 062c687..180041d 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -106,7 +106,12 @@ static struct hdmi *hdmi_init(struct platform_device *pdev)
 		goto fail;
 	}
 
-	BUG_ON(config->hpd_reg_cnt > ARRAY_SIZE(hdmi->hpd_regs));
+	hdmi->hpd_regs = devm_kzalloc(&pdev->dev, sizeof(hdmi->hpd_regs[0]) *
+			config->hpd_reg_cnt, GFP_KERNEL);
+	if (!hdmi->hpd_regs) {
+		ret = -ENOMEM;
+		goto fail;
+	}
 	for (i = 0; i < config->hpd_reg_cnt; i++) {
 		struct regulator *reg;
 
@@ -122,7 +127,12 @@ static struct hdmi *hdmi_init(struct platform_device *pdev)
 		hdmi->hpd_regs[i] = reg;
 	}
 
-	BUG_ON(config->pwr_reg_cnt > ARRAY_SIZE(hdmi->pwr_regs));
+	hdmi->pwr_regs = devm_kzalloc(&pdev->dev, sizeof(hdmi->pwr_regs[0]) *
+			config->pwr_reg_cnt, GFP_KERNEL);
+	if (!hdmi->pwr_regs) {
+		ret = -ENOMEM;
+		goto fail;
+	}
 	for (i = 0; i < config->pwr_reg_cnt; i++) {
 		struct regulator *reg;
 
@@ -138,7 +148,12 @@ static struct hdmi *hdmi_init(struct platform_device *pdev)
 		hdmi->pwr_regs[i] = reg;
 	}
 
-	BUG_ON(config->hpd_clk_cnt > ARRAY_SIZE(hdmi->hpd_clks));
+	hdmi->hpd_clks = devm_kzalloc(&pdev->dev, sizeof(hdmi->hpd_clks[0]) *
+			config->hpd_clk_cnt, GFP_KERNEL);
+	if (!hdmi->hpd_clks) {
+		ret = -ENOMEM;
+		goto fail;
+	}
 	for (i = 0; i < config->hpd_clk_cnt; i++) {
 		struct clk *clk;
 
@@ -153,7 +168,12 @@ static struct hdmi *hdmi_init(struct platform_device *pdev)
 		hdmi->hpd_clks[i] = clk;
 	}
 
-	BUG_ON(config->pwr_clk_cnt > ARRAY_SIZE(hdmi->pwr_clks));
+	hdmi->pwr_clks = devm_kzalloc(&pdev->dev, sizeof(hdmi->pwr_clks[0]) *
+			config->pwr_clk_cnt, GFP_KERNEL);
+	if (!hdmi->pwr_clks) {
+		ret = -ENOMEM;
+		goto fail;
+	}
 	for (i = 0; i < config->pwr_clk_cnt; i++) {
 		struct clk *clk;
 
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.h b/drivers/gpu/drm/msm/hdmi/hdmi.h
index 43e654f..9973e03 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.h
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.h
@@ -52,10 +52,10 @@ struct hdmi {
 
 	void __iomem *mmio;
 
-	struct regulator *hpd_regs[2];
-	struct regulator *pwr_regs[2];
-	struct clk *hpd_clks[3];
-	struct clk *pwr_clks[2];
+	struct regulator **hpd_regs;
+	struct regulator **pwr_regs;
+	struct clk **hpd_clks;
+	struct clk **pwr_clks;
 
 	struct hdmi_phy *phy;
 	struct i2c_adapter *i2c;
-- 
Qualcomm Innovation Center, Inc.

The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project


^ permalink raw reply related	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2015-01-13 19:34 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-01-07 21:27 [PATCH 0/3] drm/msm: Add power supplies config for apq8084 Stephane Viau
2015-01-07 21:27 ` [PATCH 1/3] drm/msm/hdmi: use dynamic allocation for hdmi resources Stephane Viau
2015-01-13 19:33   ` [PATCH RESEND] " Stephane Viau
2015-01-07 21:27 ` [PATCH 2/3] drm/msm/hdmi: Add HDMI platform config for apq8084 Stephane Viau
2015-01-07 21:27 ` [PATCH 3/3] drm/msm/hdmi: rework hdmi configurations, using dt_match[] Stephane Viau

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox