From: Mark Glover <mark@actisense.com>
To: johan@kernel.org, gregkh@linuxfoundation.org, linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Mark Glover <mark@actisense.com>
Subject: [PATCH] Added PIDs for Actisense USB Devices
Date: Thu, 15 Jan 2015 08:34:34 +0000 [thread overview]
Message-ID: <1421310874-6754-1-git-send-email-mark@actisense.com> (raw)
From: Mark Glover <mark@actisense.com>
Signed-off-by: Mark Glover <mark@actisense.com>
---
drivers/usb/serial/ftdi_sio.c | 17 +++++++++++++++++
drivers/usb/serial/ftdi_sio_ids.h | 21 +++++++++++++++++++++
2 files changed, 38 insertions(+)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 1ebb351..a118e5b 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -978,6 +978,23 @@ static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_PID, 1) },
/* GE Healthcare devices */
{ USB_DEVICE(GE_HEALTHCARE_VID, GE_HEALTHCARE_NEMO_TRACKER_PID) },
+ /* Active Research (Actisense) devices */
+ { USB_DEVICE(FTDI_VID, ACTISENSE_NDC_PID) },
+ { USB_DEVICE(FTDI_VID, ACTISENSE_USG_PID) },
+ { USB_DEVICE(FTDI_VID, ACTISENSE_NGT_PID) },
+ { USB_DEVICE(FTDI_VID, ACTISENSE_NGW_PID) },
+ { USB_DEVICE(FTDI_VID, ACTISENSE_D9AC_PID) },
+ { USB_DEVICE(FTDI_VID, ACTISENSE_D9AD_PID) },
+ { USB_DEVICE(FTDI_VID, ACTISENSE_D9AE_PID) },
+ { USB_DEVICE(FTDI_VID, ACTISENSE_D9AF_PID) },
+ { USB_DEVICE(FTDI_VID, CHETCO_SEAGAUGE_PID) },
+ { USB_DEVICE(FTDI_VID, CHETCO_SEASWITCH_PID) },
+ { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_NMEA2000_PID) },
+ { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_ETHERNET_PID) },
+ { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_WIFI_PID) },
+ { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_DISPLAY_PID) },
+ { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_LITE_PID) },
+ { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_ANALOG_PID) },
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serials/ftdi_sio_ids.h
index e52409c..8ccd1b6 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1438,3 +1438,24 @@
*/
#define GE_HEALTHCARE_VID 0x1901
#define GE_HEALTHCARE_NEMO_TRACKER_PID 0x0015
+
+/*
+ * Active Research (Actisense) devices
+ */
+#define ACTISENSE_NDC_PID 0xD9A8 /* NDC USB Serial Adapter */
+#define ACTISENSE_USG_PID 0xD9A9 /* USG USB Serial Adapter */
+#define ACTISENSE_NGT_PID 0xD9AA /* NGT NMEA2000 Interface */
+#define ACTISENSE_NGW_PID 0xD9AB /* NGW NMEA2000 Gateway */
+#define ACTISENSE_D9AC_PID 0xD9AC /* Actisense Reserved */
+#define ACTISENSE_D9AD_PID 0xD9AD /* Actisense Reserved */
+#define ACTISENSE_D9AE_PID 0xD9AE /* Actisense Reserved */
+#define ACTISENSE_D9AF_PID 0xD9AF /* Actisense Reserved */
+#define CHETCO_SEAGAUGE_PID 0xA548 /* SeaGauge USB Adapter */
+#define CHETCO_SEASWITCH_PID 0xA549 /* SeaSwitch USB Adapter */
+#define CHETCO_SEASMART_NMEA2000_PID 0xA54A /* SeaSmart NMEA2000 Gateway */
+#define CHETCO_SEASMART_ETHERNET_PID 0xA54B /* SeaSmart Ethernet Gateway */
+#define CHETCO_SEASMART_WIFI_PID 0xA5AC /* SeaSmart Wifi Gateway */
+#define CHETCO_SEASMART_DISPLAY_PID 0xA5AD /* SeaSmart NMEA2000 Display */
+#define CHETCO_SEASMART_LITE_PID 0xA5AE /* SeaSmart Lite USB Adapter */
+#define CHETCO_SEASMART_ANALOG_PID 0xA5AF /* SeaSmart Analog Adapter */
+
--
1.7.9.5
next reply other threads:[~2015-01-15 8:36 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-15 8:34 Mark Glover [this message]
2015-01-19 15:14 ` [PATCH] Added PIDs for Actisense USB Devices Johan Hovold
-- strict thread matches above, loose matches on Subject: below --
2015-02-11 10:49 [PATCH] Added Pids for Actisense Usb Devices Mark Glover
2015-02-12 2:24 ` Johan Hovold
2015-02-12 8:46 ` Mark Glover
2015-02-12 9:42 ` Johan Hovold
2015-01-14 13:58 [PATCH] Added PIDs for Actisense USB Devices Mark Glover
2015-01-14 14:56 ` Peter Stuge
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1421310874-6754-1-git-send-email-mark@actisense.com \
--to=mark@actisense.com \
--cc=gregkh@linuxfoundation.org \
--cc=johan@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox