Re: [PATCH] dmaengine: dw: support for clockless platforms

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

On Tue, 2015-01-20 at 14:57 +0200, Heikki Krogerus wrote:
> When requesting clock in the platform driver, leaving
> chip->clk value as NULL if -ENOENT is returned, and
> continue. With other errors returning failure. It makes the
> driver usable on platforms that do not provide the clock.
> 
> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>

Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

> ---
>  drivers/dma/dw/platform.c | 8 ++++++--
>  1 file changed, 6 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/dma/dw/platform.c b/drivers/dma/dw/platform.c
> index 32ea1ac..b183bc0 100644
> --- a/drivers/dma/dw/platform.c
> +++ b/drivers/dma/dw/platform.c
> @@ -180,8 +180,12 @@ static int dw_probe(struct platform_device *pdev)
>  	chip->dev = dev;
>  
>  	chip->clk = devm_clk_get(chip->dev, "hclk");
> -	if (IS_ERR(chip->clk))
> -		return PTR_ERR(chip->clk);
> +	if (IS_ERR(chip->clk)) {
> +		if (PTR_ERR(chip->clk) == -ENOENT)
> +			chip->clk = NULL;
> +		else
> +			return PTR_ERR(chip->clk);
> +	}
>  	err = clk_prepare_enable(chip->clk);
>  	if (err)
>  		return err;


-- 
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy