From: Huang Ying <ying.huang@linux.intel.com>
To: Will Deacon <will.deacon@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>,
LKML <linux-kernel@vger.kernel.org>, LKP ML <lkp@01.org>
Subject: [LKP] [mm] 721c21c17ab: +11.7% will-it-scale.per_thread_ops
Date: Tue, 03 Feb 2015 15:45:04 +0800 [thread overview]
Message-ID: <1422949504.13951.5.camel@linux.intel.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 5254 bytes --]
FYI, we noticed the below changes on
commit 721c21c17ab958abf19a8fc611c3bd4743680e38 ("mm: mmu_gather: use tlb->end != 0 only for TLB invalidation")
testbox/testcase/testparams: nhm4/will-it-scale/performance-readseek1
v3.19-rc4 721c21c17ab958abf19a8fc611
---------------- --------------------------
%stddev %change %stddev
\ | \
0.56 ± 1% +5.2% 0.59 ± 1% will-it-scale.scalability
1807741 ± 0% +2.3% 1848641 ± 0% will-it-scale.per_thread_ops
740 ± 30% +40.9% 1043 ± 26% sched_debug.cpu#4.ttwu_local
1335 ± 20% +23.7% 1651 ± 17% sched_debug.cpu#4.ttwu_count
506 ± 9% +40.8% 712 ± 1% cpuidle.C1-NHM.usage
120 ± 9% +33.1% 160 ± 11% sched_debug.cpu#7.load
120 ± 9% +26.2% 151 ± 10% sched_debug.cfs_rq[7]:/.load
90 ± 5% -16.2% 75 ± 16% sched_debug.cpu#6.cpu_load[4]
96 ± 7% +16.7% 112 ± 10% sched_debug.cfs_rq[2]:/.runnable_load_avg
testbox/testcase/testparams: nhm4/will-it-scale/performance-pread2
v3.19-rc4 721c21c17ab958abf19a8fc611
---------------- --------------------------
900692 ± 1% +11.7% 1005724 ± 0% will-it-scale.per_thread_ops
28033529 ± 0% -1.2% 27698665 ± 0% will-it-scale.time.voluntary_context_switches
671 ± 22% +40.4% 942 ± 27% sched_debug.cfs_rq[7]:/.blocked_load_avg
802 ± 19% +30.9% 1049 ± 25% sched_debug.cfs_rq[7]:/.tg_load_contrib
44840 ± 6% +15.6% 51846 ± 6% meminfo.DirectMap4k
18284 ± 1% -7.4% 16926 ± 2% vmstat.system.in
378463 ± 0% -1.2% 373746 ± 0% vmstat.system.cs
testbox/testcase/testparams: nhm4/will-it-scale/performance-readseek3
v3.19-rc4 721c21c17ab958abf19a8fc611
---------------- --------------------------
0.55 ± 0% +9.9% 0.60 ± 5% will-it-scale.scalability
1791707 ± 0% +2.9% 1843202 ± 0% will-it-scale.per_thread_ops
187 ± 41% +167.3% 501 ± 23% sched_debug.cfs_rq[0]:/.blocked_load_avg
281 ± 29% +121.3% 622 ± 18% sched_debug.cfs_rq[0]:/.tg_load_contrib
110 ± 9% +25.5% 138 ± 13% sched_debug.cfs_rq[5]:/.load
110 ± 9% +25.9% 138 ± 13% sched_debug.cpu#5.load
178 ± 6% -19.5% 144 ± 16% sched_debug.cpu#4.cpu_load[1]
94 ± 6% +12.9% 107 ± 8% sched_debug.cfs_rq[3]:/.runnable_load_avg
1.78 ± 7% +17.4% 2.09 ± 0% perf-profile.cpu-cycles.put_page.shmem_file_read_iter.new_sync_read.__vfs_read.vfs_read
187 ± 9% -19.1% 152 ± 16% sched_debug.cpu#4.cpu_load[2]
757 ± 5% +10.6% 838 ± 2% slabinfo.kmalloc-2048.active_objs
3064 ± 7% +7.8% 3302 ± 6% sched_debug.cpu#1.curr->pid
5.23 ± 2% +8.8% 5.69 ± 4% perf-profile.cpu-cycles.security_file_permission.rw_verify_area.vfs_read.sys_read.system_call_fastpath
3.23 ± 4% +8.0% 3.48 ± 5% perf-profile.cpu-cycles.copy_page_to_iter_iovec.copy_page_to_iter.shmem_file_read_iter.new_sync_read.__vfs_read
4216 ± 7% +7.5% 4531 ± 5% slabinfo.kmalloc-192.active_objs
nhm4: Nehalem
Memory: 4G
lkp-sbx04: Sandy Bridge-EX
Memory: 64G
will-it-scale.per_thread_ops
1.04e+06 ++---------------------------------------------------------------+
| O O O |
1.02e+06 ++ O O O O O O O O O |
1e+06 O+ O O O O O
| O O O |
980000 ++ |
| |
960000 ++ |
| |
940000 ++ |
920000 ++ |
*.. *..* |
900000 ++ + |
| *...*.. + |
880000 ++--------*------------------------------------------------------+
[*] bisect-good sample
[O] bisect-bad sample
To reproduce:
apt-get install ruby ruby-oj
git clone git://git.kernel.org/pub/scm/linux/kernel/git/wfg/lkp-tests.git
cd lkp-tests
bin/setup-local job.yaml # the job file attached in this email
bin/run-local job.yaml
Disclaimer:
Results have been estimated based on internal Intel analysis and are provided
for informational purposes only. Any difference in system hardware or software
design or configuration may affect actual performance.
Thanks,
Huang, Ying
[-- Attachment #2: job.yaml --]
[-- Type: text/plain, Size: 1753 bytes --]
---
testcase: will-it-scale
default-monitors:
wait: pre-test
uptime:
iostat:
vmstat:
numa-numastat:
numa-vmstat:
numa-meminfo:
proc-vmstat:
proc-stat:
meminfo:
slabinfo:
interrupts:
lock_stat:
latency_stats:
softirqs:
bdi_dev_mapping:
diskstats:
cpuidle:
cpufreq:
turbostat:
sched_debug:
interval: 10
pmeter:
default_watchdogs:
watch-oom:
watchdog:
cpufreq_governor:
- performance
commit: 634b0bd490b7ebd7a054cea4f7e0d25748bde678
model: Nehalem
nr_cpu: 8
memory: 4G
hdd_partitions: "/dev/disk/by-id/ata-WDC_WD1003FBYZ-010FB0_WD-WCAW36812041-part1"
swap_partitions: "/dev/disk/by-id/ata-WDC_WD1003FBYZ-010FB0_WD-WCAW36812041-part2"
rootfs_partition: "/dev/disk/by-id/ata-WDC_WD1003FBYZ-010FB0_WD-WCAW36812041-part3"
netconsole_port: 6649
perf-profile:
freq: 800
will-it-scale:
test:
- pread2
testbox: nhm4
tbox_group: nhm4
kconfig: x86_64-rhel
enqueue_time: 2015-01-16 19:39:12.848821511 +08:00
head_commit: 634b0bd490b7ebd7a054cea4f7e0d25748bde678
base_commit: eaa27f34e91a14cdceed26ed6c6793ec1d186115
branch: next/master
kernel: "/kernel/x86_64-rhel/634b0bd490b7ebd7a054cea4f7e0d25748bde678/vmlinuz-3.19.0-rc4-next-20150116-g634b0bd"
user: lkp
queue: cyclic
rootfs: debian-x86_64-2015-01-13.cgz
result_root: "/result/nhm4/will-it-scale/performance-pread2/debian-x86_64-2015-01-13.cgz/x86_64-rhel/634b0bd490b7ebd7a054cea4f7e0d25748bde678/0"
job_file: "/lkp/scheduled/nhm4/cyclic_will-it-scale-performance-pread2-x86_64-rhel-HEAD-634b0bd490b7ebd7a054cea4f7e0d25748bde678-0.yaml"
dequeue_time: 2015-01-17 02:30:35.332402855 +08:00
job_state: finished
loadavg: 5.12 3.21 1.34 1/123 6702
start_time: '1421433067'
end_time: '1421433372'
version: "/lkp/lkp/.src-20150116-113525"
[-- Attachment #3: reproduce --]
[-- Type: text/plain, Size: 31 bytes --]
./runtest.py pread2 32 1 4 6 8
[-- Attachment #4: Type: text/plain, Size: 89 bytes --]
_______________________________________________
LKP mailing list
LKP@linux.intel.com
\r
next reply other threads:[~2015-02-03 7:45 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-03 7:45 Huang Ying [this message]
2015-02-03 10:27 ` [LKP] [mm] 721c21c17ab: +11.7% will-it-scale.per_thread_ops Will Deacon
2015-02-05 5:41 ` Huang Ying
2015-02-12 4:56 ` Huang Ying
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1422949504.13951.5.camel@linux.intel.com \
--to=ying.huang@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lkp@01.org \
--cc=torvalds@linux-foundation.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox