From: Joe Perches <joe@perches.com>
To: Markus Pargmann <mpa@pengutronix.de>
Cc: nbd-general@lists.sourceforge.net, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 6/9] nbd: Restructure debugging prints
Date: Thu, 12 Feb 2015 13:08:48 -0800 [thread overview]
Message-ID: <1423775328.15343.38.camel@perches.com> (raw)
In-Reply-To: <1423774657-12748-7-git-send-email-mpa@pengutronix.de>
On Thu, 2015-02-12 at 21:57 +0100, Markus Pargmann wrote:
> dprintk has some name collisions with other frameworks and drivers. It
> is also not necessary to have these custom debug print filters. Dynamic
> debug offers the same amount of filtered debugging.
>
> This patch replaces all dprintks with dev_dbg(). It also removes the
> ioctl dprintk which prints the ingoing ioctls which should be
> replaceable by strace or similar stuff.
Perhaps add
#define nbd_dbg(nbd, fmt, ...) \
dev_dbg(disk_to_dev((nbd)->disk), "%s: " fmt, \
nbd->disk->disk_name, ##__VA_ARGS__)
(or function with %pV)
> diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
[]
> +static void nbd_end_request(struct nbd_device *nbd, struct request *req)
> {
> int error = req->errors ? -EIO : 0;
> struct request_queue *q = req->q;
> unsigned long flags;
>
> - dprintk(DBG_BLKDEV, "%s: request %p: %s\n", req->rq_disk->disk_name,
> - req, error ? "failed" : "done");
> + dev_dbg(disk_to_dev(nbd->disk), "%s: request %p: %s\n",
> + req->rq_disk->disk_name, req, error ? "failed" : "done");
so this becomes
nbd_dbg(nbd, "request %p: %s\n",
req, error ? "failed" : "done");
> @@ -276,11 +239,9 @@ static int nbd_send_req(struct nbd_device *nbd, struct request *req)
> }
> memcpy(request.handle, &req, sizeof(req));
>
> - dprintk(DBG_TX, "%s: request %p: sending control (%s@%llu,%uB)\n",
> - nbd->disk->disk_name, req,
> - nbdcmd_to_ascii(nbd_cmd(req)),
> - (unsigned long long)blk_rq_pos(req) << 9,
> - blk_rq_bytes(req));
> + dev_dbg(disk_to_dev(nbd->disk), "%s: request %p: sending control (%s@%llu,%uB)\n",
> + nbd->disk->disk_name, req, nbdcmd_to_ascii(nbd_cmd(req)),
> + (unsigned long long)blk_rq_pos(req) << 9, blk_rq_bytes(req));
nbd_dbg(nbd, "request %p: sending control (%s@%llu,%uB)\n",
req, nbdcmd_to_ascii(nbd_cmd(req)),
(unsigned long long)blk_rq_pos(req) << 9, blk_rq_bytes(req));
> @@ -300,8 +261,8 @@ static int nbd_send_req(struct nbd_device *nbd, struct request *req)
> flags = 0;
> if (!rq_iter_last(bvec, iter))
> flags = MSG_MORE;
> - dprintk(DBG_TX, "%s: request %p: sending %d bytes data\n",
> - nbd->disk->disk_name, req, bvec.bv_len);
> + dev_dbg(disk_to_dev(nbd->disk), "%s: request %p: sending %d bytes data\n",
> + nbd->disk->disk_name, req, bvec.bv_len);
etc...
next prev parent reply other threads:[~2015-02-12 21:08 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-12 20:57 [PATCH 0/9] nbd: cleanups Markus Pargmann
2015-02-12 20:57 ` [PATCH 1/9] Documentation: nbd: Reformat to allow more documentation Markus Pargmann
2015-02-12 20:57 ` [PATCH 2/9] Documentation: nbd: Add list of module parameters Markus Pargmann
2015-02-14 10:29 ` [Nbd] " Wouter Verhelst
2015-02-15 21:53 ` Markus Pargmann
2015-02-12 20:57 ` [PATCH 3/9] nbd: Remove kernel internal header Markus Pargmann
2015-02-14 10:30 ` [Nbd] " Wouter Verhelst
2015-02-15 21:56 ` Markus Pargmann
2015-02-12 20:57 ` [PATCH 4/9] nbd: Replace kthread_create with kthread_run Markus Pargmann
2015-02-12 20:57 ` [PATCH 5/9] nbd: Fix device bytesize type Markus Pargmann
2015-02-12 20:57 ` [PATCH 6/9] nbd: Restructure debugging prints Markus Pargmann
2015-02-12 21:08 ` Joe Perches [this message]
2015-02-13 9:58 ` Markus Pargmann
2015-02-13 10:05 ` Joe Perches
2015-02-13 11:24 ` Markus Pargmann
2015-02-13 11:48 ` Joe Perches
2015-02-15 22:20 ` Markus Pargmann
2015-02-16 0:06 ` Joe Perches
2015-02-12 20:57 ` [PATCH 7/9] nbd: Remove fixme that was already fixed Markus Pargmann
2015-02-12 20:57 ` [PATCH 8/9] nbd: Return error code directly Markus Pargmann
2015-02-12 20:57 ` [PATCH 9/9] nbd: Return error pointer directly Markus Pargmann
-- strict thread matches above, loose matches on Subject: below --
2015-04-02 8:11 [PULL] NBD patches for 4.1 Markus Pargmann
2015-04-02 8:11 ` [PATCH 6/9] nbd: Restructure debugging prints Markus Pargmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1423775328.15343.38.camel@perches.com \
--to=joe@perches.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mpa@pengutronix.de \
--cc=nbd-general@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox