From: Mark Glover <mark@actisense.com>
To: johan@kernel.org, gregkh@linuxfoundation.org, linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Mark Glover <mark@actisense.com>
Subject: [PATCH v4] USB:ftdi_sio: Added Pids for Actisense Usb Devices
Date: Fri, 13 Feb 2015 09:04:39 +0000 [thread overview]
Message-ID: <1423818279-3675-1-git-send-email-mark@actisense.com> (raw)
From: Mark Glover <mark@actisense.com>
Only Email comments have changed since the last version of this patch.
These product identifiers (PID) all deal with marine NMEA format data used on motor boats and yachts
We supply the programmed devices to Chetco, for use inside their equipment.
The PIDs are a direct copy of our Windows device drivers (FTDI drivers with altered PIDs)
Signed-off-by: Mark Glover <mark@actisense.com>
---
drivers/usb/serial/ftdi_sio.c | 17 +++++++++++++++++
drivers/usb/serial/ftdi_sio_ids.h | 21 +++++++++++++++++++++
2 files changed, 38 insertions(+)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 1ebb351..651dc1b 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -978,6 +978,23 @@ static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_PID, 1) },
/* GE Healthcare devices */
{ USB_DEVICE(GE_HEALTHCARE_VID, GE_HEALTHCARE_NEMO_TRACKER_PID) },
+ /* Active Research (Actisense) devices */
+ { USB_DEVICE(FTDI_VID, ACTISENSE_NDC_PID) },
+ { USB_DEVICE(FTDI_VID, ACTISENSE_USG_PID) },
+ { USB_DEVICE(FTDI_VID, ACTISENSE_NGT_PID) },
+ { USB_DEVICE(FTDI_VID, ACTISENSE_NGW_PID) },
+ { USB_DEVICE(FTDI_VID, ACTISENSE_D9AC_PID) },
+ { USB_DEVICE(FTDI_VID, ACTISENSE_D9AD_PID) },
+ { USB_DEVICE(FTDI_VID, ACTISENSE_D9AE_PID) },
+ { USB_DEVICE(FTDI_VID, ACTISENSE_D9AF_PID) },
+ { USB_DEVICE(FTDI_VID, CHETCO_SEAGAUGE_PID) },
+ { USB_DEVICE(FTDI_VID, CHETCO_SEASWITCH_PID) },
+ { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_NMEA2000_PID) },
+ { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_ETHERNET_PID) },
+ { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_WIFI_PID) },
+ { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_DISPLAY_PID) },
+ { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_LITE_PID) },
+ { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_ANALOG_PID) },
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index e52409c..87d9ed7 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1438,3 +1438,23 @@
*/
#define GE_HEALTHCARE_VID 0x1901
#define GE_HEALTHCARE_NEMO_TRACKER_PID 0x0015
+
+/*
+ * Active Research (Actisense) devices
+ */
+#define ACTISENSE_NDC_PID 0xD9A8 /* NDC USB Serial Adapter */
+#define ACTISENSE_USG_PID 0xD9A9 /* USG USB Serial Adapter */
+#define ACTISENSE_NGT_PID 0xD9AA /* NGT NMEA2000 Interface */
+#define ACTISENSE_NGW_PID 0xD9AB /* NGW NMEA2000 Gateway */
+#define ACTISENSE_D9AC_PID 0xD9AC /* Actisense Reserved */
+#define ACTISENSE_D9AD_PID 0xD9AD /* Actisense Reserved */
+#define ACTISENSE_D9AE_PID 0xD9AE /* Actisense Reserved */
+#define ACTISENSE_D9AF_PID 0xD9AF /* Actisense Reserved */
+#define CHETCO_SEAGAUGE_PID 0xA548 /* SeaGauge USB Adapter */
+#define CHETCO_SEASWITCH_PID 0xA549 /* SeaSwitch USB Adapter */
+#define CHETCO_SEASMART_NMEA2000_PID 0xA54A /* SeaSmart NMEA2000 Gateway */
+#define CHETCO_SEASMART_ETHERNET_PID 0xA54B /* SeaSmart Ethernet Gateway */
+#define CHETCO_SEASMART_WIFI_PID 0xA5AC /* SeaSmart Wifi Gateway */
+#define CHETCO_SEASMART_DISPLAY_PID 0xA5AD /* SeaSmart NMEA2000 Display */
+#define CHETCO_SEASMART_LITE_PID 0xA5AE /* SeaSmart Lite USB Adapter */
+#define CHETCO_SEASMART_ANALOG_PID 0xA5AF /* SeaSmart Analog Adapter */
--
1.7.9.5
next reply other threads:[~2015-02-13 9:22 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-13 9:04 Mark Glover [this message]
2015-02-15 5:50 ` [PATCH v4] USB:ftdi_sio: Added Pids for Actisense Usb Devices Johan Hovold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1423818279-3675-1-git-send-email-mark@actisense.com \
--to=mark@actisense.com \
--cc=gregkh@linuxfoundation.org \
--cc=johan@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox