From: Peter Hung <hpeter@gmail.com>
To: johan@kernel.org
Cc: gregkh@linuxfoundation.org, linux-usb@vger.kernel.org,
linux-kernel@vger.kernel.org, tom_tsai@fintek.com.tw,
peter_hong@fintek.com.tw,
Peter Hung <hpeter+linux_kernel@gmail.com>
Subject: [PATCH V6 05/10] USB: f81232: implement MCR/MSR function
Date: Mon, 16 Feb 2015 15:57:57 +0800 [thread overview]
Message-ID: <1424073482-18164-6-git-send-email-hpeter+linux_kernel@gmail.com> (raw)
In-Reply-To: <1424073482-18164-1-git-send-email-hpeter+linux_kernel@gmail.com>
This patch implement relative MCR/MSR function, such like
tiocmget()/tiocmset()/dtr_rts().
The f81232_set_mctrl() replace set_control_lines() to do MCR control
so we clean-up the set_control_lines() function.
Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com>
---
drivers/usb/serial/f81232.c | 98 +++++++++++++++++++++++++++++++++++----------
1 file changed, 77 insertions(+), 21 deletions(-)
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 06d1eb0..e1cdf42 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -44,6 +44,7 @@ MODULE_DEVICE_TABLE(usb, id_table);
#define INTERRUPT_ENABLE_REGISTER (0x01 + SERIAL_BASE_ADDRESS)
#define FIFO_CONTROL_REGISTER (0x02 + SERIAL_BASE_ADDRESS)
#define LINE_CONTROL_REGISTER (0x03 + SERIAL_BASE_ADDRESS)
+#define MODEM_CONTROL_REGISTER (0x04 + SERIAL_BASE_ADDRESS)
#define MODEM_STATUS_REGISTER (0x06 + SERIAL_BASE_ADDRESS)
#define CONTROL_DTR 0x01
@@ -156,6 +157,50 @@ static void f81232_read_msr(struct usb_serial_port *port)
wake_up_interruptible(&port->port.delta_msr_wait);
}
+static int f81232_set_mctrl(struct usb_serial_port *port,
+ unsigned int set, unsigned int clear)
+{
+ u8 urb_value;
+ int status;
+ unsigned long flags;
+ struct f81232_private *priv = usb_get_serial_port_data(port);
+
+ if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0)
+ return 0; /* no change */
+
+ /* 'set' takes precedence over 'clear' */
+ clear &= ~set;
+
+ /* force enable interrupt with OUT2 */
+ urb_value = UART_MCR_OUT2 | priv->line_control;
+
+ if (clear & TIOCM_DTR)
+ urb_value &= ~UART_MCR_DTR;
+
+ if (clear & TIOCM_RTS)
+ urb_value &= ~UART_MCR_RTS;
+
+ if (set & TIOCM_DTR)
+ urb_value |= UART_MCR_DTR;
+
+ if (set & TIOCM_RTS)
+ urb_value |= UART_MCR_RTS;
+
+ dev_dbg(&port->dev, "%s new:%02x old:%02x\n", __func__,
+ urb_value, priv->line_control);
+
+ status = f81232_set_register(port, MODEM_CONTROL_REGISTER, urb_value);
+ if (status < 0) {
+ dev_err(&port->dev, "%s set MCR status < 0\n", __func__);
+ } else {
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->line_control = urb_value;
+ spin_unlock_irqrestore(&priv->lock, flags);
+ }
+
+ return status;
+}
+
static void f81232_update_modem_status(struct usb_serial_port *port,
unsigned char *data,
unsigned int actual_length)
@@ -267,12 +312,6 @@ static void f81232_process_read_urb(struct urb *urb)
tty_flip_buffer_push(&port->port);
}
-static int set_control_lines(struct usb_device *dev, u8 value)
-{
- /* FIXME - Stubbed out for now */
- return 0;
-}
-
static void f81232_break_ctl(struct tty_struct *tty, int break_state)
{
/* FIXME - Stubbed out for now */
@@ -388,15 +427,41 @@ static void f81232_set_termios(struct tty_struct *tty,
static int f81232_tiocmget(struct tty_struct *tty)
{
- /* FIXME - Stubbed out for now */
- return 0;
+ int r;
+ struct usb_serial_port *port = tty->driver_data;
+ struct f81232_private *port_priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+ u8 mcr, msr;
+
+ /* force get current MSR changed state */
+ f81232_read_msr(port);
+
+ spin_lock_irqsave(&port_priv->lock, flags);
+ mcr = port_priv->line_control;
+ msr = port_priv->modem_status;
+ spin_unlock_irqrestore(&port_priv->lock, flags);
+
+ r = (mcr & UART_MCR_DTR ? TIOCM_DTR : 0) |
+ (mcr & UART_MCR_RTS ? TIOCM_RTS : 0) |
+ (msr & UART_MSR_CTS ? TIOCM_CTS : 0) |
+ (msr & UART_MSR_DCD ? TIOCM_CAR : 0) |
+ (msr & UART_MSR_RI ? TIOCM_RI : 0) |
+ (msr & UART_MSR_DSR ? TIOCM_DSR : 0);
+
+ return r;
}
static int f81232_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
- /* FIXME - Stubbed out for now */
- return 0;
+ int status;
+ struct usb_serial_port *port = tty->driver_data;
+
+ status = f81232_set_mctrl(port, set, clear);
+ if (status < 0)
+ return usb_translate_errors(status);
+ else
+ return 0;
}
static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port)
@@ -437,19 +502,10 @@ static void f81232_close(struct usb_serial_port *port)
static void f81232_dtr_rts(struct usb_serial_port *port, int on)
{
- struct f81232_private *priv = usb_get_serial_port_data(port);
- unsigned long flags;
- u8 control;
-
- spin_lock_irqsave(&priv->lock, flags);
- /* Change DTR and RTS */
if (on)
- priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
+ f81232_set_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0);
else
- priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
- control = priv->line_control;
- spin_unlock_irqrestore(&priv->lock, flags);
- set_control_lines(port->serial->dev, control);
+ f81232_set_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS);
}
static int f81232_carrier_raised(struct usb_serial_port *port)
--
1.9.1
next prev parent reply other threads:[~2015-02-16 7:58 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-16 7:57 [PATCH V6 00/10] USB: f81232: V6 patches Peter Hung
2015-02-16 7:57 ` [PATCH V6 01/10] USB: f81232: rename private struct member name Peter Hung
2015-02-16 7:57 ` [PATCH V6 02/10] USB: f81232: implement read IIR/MSR with endpoint Peter Hung
2015-02-17 8:30 ` Johan Hovold
2015-02-16 7:57 ` [PATCH V6 03/10] USB: f81232: implement RX bulk-in ep Peter Hung
2015-02-16 19:41 ` Greg KH
2015-02-17 1:41 ` Peter Hung
2015-02-17 10:06 ` David Laight
2015-02-17 14:48 ` 'Greg KH'
2015-02-16 7:57 ` [PATCH V6 04/10] USB: f81232: implement set_termios Peter Hung
2015-02-17 8:59 ` Johan Hovold
2015-02-16 7:57 ` Peter Hung [this message]
2015-02-17 9:40 ` [PATCH V6 05/10] USB: f81232: implement MCR/MSR function Johan Hovold
2015-02-16 7:57 ` [PATCH V6 06/10] USB: f81232: clarify f81232_ioctl and fix Peter Hung
2015-02-16 7:57 ` [PATCH V6 07/10] USB: f81232: fix error in f81232_carrier_raised() Peter Hung
2015-02-17 9:44 ` Johan Hovold
2015-02-16 7:58 ` [PATCH V6 08/10] USB: f81232: fix read MSR strange value Peter Hung
2015-02-17 9:51 ` Johan Hovold
2015-02-24 2:17 ` Peter Hung
2015-02-16 7:58 ` [PATCH V6 09/10] USB: f81232: implement delta change for MSR count Peter Hung
2015-02-16 7:58 ` [PATCH V6 10/10] USB: f81232: modify/add author Peter Hung
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1424073482-18164-6-git-send-email-hpeter+linux_kernel@gmail.com \
--to=hpeter@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=hpeter+linux_kernel@gmail.com \
--cc=johan@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=peter_hong@fintek.com.tw \
--cc=tom_tsai@fintek.com.tw \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox