From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
To: cw00.choi@samsung.com, myungjoo.ham@samsung.com
Cc: sameo@linux.intel.com, lee.jones@linaro.org, lgirdwood@gmail.com,
broonie@kernel.org, patches@opensource.wolfsonmicro.com,
linux-kernel@vger.kernel.org
Subject: [PATCH 1/2] extcon: arizona: Deobfuscate arizona_extcon_do_magic
Date: Mon, 16 Feb 2015 15:41:02 +0000 [thread overview]
Message-ID: <1424101263-27593-1-git-send-email-ckeepax@opensource.wolfsonmicro.com> (raw)
arizona_extcon_do_magic does not lend a lot of clarity to the purpose
of the function, and as all the registers used are described in the
datasheet there is no need to obfuscate the code. This patch renames the
function to arizona_extcon_hp_clamp, as it controls clamping on the
headphone output.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---
drivers/extcon/extcon-arizona.c | 36 ++++++++++++++++++++----------------
include/linux/mfd/arizona/core.h | 2 +-
sound/soc/codecs/arizona.c | 4 ++--
3 files changed, 23 insertions(+), 19 deletions(-)
diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index 63f01c4..95cf7f8 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -136,18 +136,22 @@ static const char *arizona_cable[] = {
static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info);
-static void arizona_extcon_do_magic(struct arizona_extcon_info *info,
- unsigned int magic)
+static void arizona_extcon_hp_clamp(struct arizona_extcon_info *info,
+ bool clamp)
{
struct arizona *arizona = info->arizona;
+ unsigned int val = 0;
int ret;
+ if (clamp)
+ val = ARIZONA_RMV_SHRT_HP1L;
+
mutex_lock(&arizona->dapm->card->dapm_mutex);
- arizona->hpdet_magic = magic;
+ arizona->hpdet_clamp = clamp;
- /* Keep the HP output stages disabled while doing the magic */
- if (magic) {
+ /* Keep the HP output stages disabled while doing the clamp */
+ if (clamp) {
ret = regmap_update_bits(arizona->regmap,
ARIZONA_OUTPUT_ENABLES_1,
ARIZONA_OUT1L_ENA |
@@ -158,20 +162,20 @@ static void arizona_extcon_do_magic(struct arizona_extcon_info *info,
ret);
}
- ret = regmap_update_bits(arizona->regmap, 0x225, 0x4000,
- magic);
+ ret = regmap_update_bits(arizona->regmap, ARIZONA_HP_CTRL_1L,
+ ARIZONA_RMV_SHRT_HP1L, val);
if (ret != 0)
- dev_warn(arizona->dev, "Failed to do magic: %d\n",
+ dev_warn(arizona->dev, "Failed to do clamp: %d\n",
ret);
- ret = regmap_update_bits(arizona->regmap, 0x226, 0x4000,
- magic);
+ ret = regmap_update_bits(arizona->regmap, ARIZONA_HP_CTRL_1R,
+ ARIZONA_RMV_SHRT_HP1R, val);
if (ret != 0)
- dev_warn(arizona->dev, "Failed to do magic: %d\n",
+ dev_warn(arizona->dev, "Failed to do clamp: %d\n",
ret);
- /* Restore the desired state while not doing the magic */
- if (!magic) {
+ /* Restore the desired state while not doing the clamp */
+ if (!clamp) {
ret = regmap_update_bits(arizona->regmap,
ARIZONA_OUTPUT_ENABLES_1,
ARIZONA_OUT1L_ENA |
@@ -603,7 +607,7 @@ done:
ARIZONA_HP_IMPEDANCE_RANGE_MASK | ARIZONA_HP_POLL,
0);
- arizona_extcon_do_magic(info, 0);
+ arizona_extcon_hp_clamp(info, false);
if (id_gpio)
gpio_set_value_cansleep(id_gpio, 0);
@@ -648,7 +652,7 @@ static void arizona_identify_headphone(struct arizona_extcon_info *info)
if (info->mic)
arizona_stop_mic(info);
- arizona_extcon_do_magic(info, 0x4000);
+ arizona_extcon_hp_clamp(info, true);
ret = regmap_update_bits(arizona->regmap,
ARIZONA_ACCESSORY_DETECT_MODE_1,
@@ -699,7 +703,7 @@ static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info)
info->hpdet_active = true;
- arizona_extcon_do_magic(info, 0x4000);
+ arizona_extcon_hp_clamp(info, true);
ret = regmap_update_bits(arizona->regmap,
ARIZONA_ACCESSORY_DETECT_MODE_1,
diff --git a/include/linux/mfd/arizona/core.h b/include/linux/mfd/arizona/core.h
index 910e3aa..4863548 100644
--- a/include/linux/mfd/arizona/core.h
+++ b/include/linux/mfd/arizona/core.h
@@ -126,7 +126,7 @@ struct arizona {
struct regmap_irq_chip_data *aod_irq_chip;
struct regmap_irq_chip_data *irq_chip;
- bool hpdet_magic;
+ bool hpdet_clamp;
unsigned int hp_ena;
struct mutex clk_lock;
diff --git a/sound/soc/codecs/arizona.c b/sound/soc/codecs/arizona.c
index 9550d74..a6e5c70 100644
--- a/sound/soc/codecs/arizona.c
+++ b/sound/soc/codecs/arizona.c
@@ -780,8 +780,8 @@ int arizona_hp_ev(struct snd_soc_dapm_widget *w,
priv->arizona->hp_ena &= ~mask;
priv->arizona->hp_ena |= val;
- /* Force off if HPDET magic is active */
- if (priv->arizona->hpdet_magic)
+ /* Force off if HPDET clamp is active */
+ if (priv->arizona->hpdet_clamp)
val = 0;
regmap_update_bits_async(arizona->regmap, ARIZONA_OUTPUT_ENABLES_1,
--
1.7.2.5
next reply other threads:[~2015-02-16 15:43 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-16 15:41 Charles Keepax [this message]
2015-02-16 15:41 ` [PATCH 2/2] extcon: arizona: Fix headphone clamping on wm5110 Charles Keepax
2015-02-16 16:49 ` Chanwoo Choi
2015-02-16 16:48 ` [PATCH 1/2] extcon: arizona: Deobfuscate arizona_extcon_do_magic Chanwoo Choi
2015-02-16 23:58 ` Chanwoo Choi
2015-02-16 16:50 ` Lee Jones
2015-02-17 1:56 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1424101263-27593-1-git-send-email-ckeepax@opensource.wolfsonmicro.com \
--to=ckeepax@opensource.wolfsonmicro.com \
--cc=broonie@kernel.org \
--cc=cw00.choi@samsung.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=myungjoo.ham@samsung.com \
--cc=patches@opensource.wolfsonmicro.com \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox