From: John Stultz <john.stultz@linaro.org>
To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Cc: John Stultz <john.stultz@linaro.org>,
Shuah Khan <shuahkh@osg.samsung.com>,
Prarit Bhargava <prarit@redhat.com>,
Thomas Gleixner <tglx@linutronix.de>,
Richard Cochran <richardcochran@gmail.com>
Subject: [PATCH 05/19] selftests/timers: Add nsleep-lat test from timetest suite
Date: Mon, 2 Mar 2015 13:09:58 -0800 [thread overview]
Message-ID: <1425330612-24280-6-git-send-email-john.stultz@linaro.org> (raw)
In-Reply-To: <1425330612-24280-1-git-send-email-john.stultz@linaro.org>
Adds my nanosleep latency test from the timetest suite.
This checks to make sure we don't see "unreasonable"
latencies (> 40ms) when calling nanosleep.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
tools/testing/selftests/timers/Makefile | 3 +-
tools/testing/selftests/timers/nsleep-lat.c | 190 ++++++++++++++++++++++++++++
2 files changed, 192 insertions(+), 1 deletion(-)
create mode 100644 tools/testing/selftests/timers/nsleep-lat.c
diff --git a/tools/testing/selftests/timers/Makefile b/tools/testing/selftests/timers/Makefile
index fcb7c2f..dae9ee7 100644
--- a/tools/testing/selftests/timers/Makefile
+++ b/tools/testing/selftests/timers/Makefile
@@ -2,13 +2,14 @@ CC = $(CROSS_COMPILE)gcc
BUILD_FLAGS = -DKTEST
CFLAGS += -O3 -Wl,-no-as-needed -Wall $(BUILD_FLAGS)
LDFLAGS += -lrt -lpthread
-bins = posix_timers nanosleep inconsistency-check
+bins = posix_timers nanosleep inconsistency-check nsleep-lat
all: ${bins}
run_tests: all
./posix_timers
./nanosleep
+ ./nsleep-lat
./inconsistency-check
clean:
rm -f ${bins}
diff --git a/tools/testing/selftests/timers/nsleep-lat.c b/tools/testing/selftests/timers/nsleep-lat.c
new file mode 100644
index 0000000..2d7898f
--- /dev/null
+++ b/tools/testing/selftests/timers/nsleep-lat.c
@@ -0,0 +1,190 @@
+/* Measure nanosleep timer latency
+ * by: john stultz (john.stultz@linaro.org)
+ * (C) Copyright Linaro 2013
+ * Licensed under the GPLv2
+ *
+ * To build:
+ * $ gcc nsleep-lat.c -o nsleep-lat -lrt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <time.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <string.h>
+#include <signal.h>
+#ifdef KTEST
+#include "../kselftest.h"
+#else
+static inline int ksft_exit_pass(void)
+{
+ exit(0);
+}
+static inline int ksft_exit_fail(void)
+{
+ exit(1);
+}
+#endif
+
+#define NSEC_PER_SEC 1000000000ULL
+
+#define UNRESONABLE_LATENCY 40000000 /* 40ms in nanosecs */
+
+
+#define CLOCK_REALTIME 0
+#define CLOCK_MONOTONIC 1
+#define CLOCK_PROCESS_CPUTIME_ID 2
+#define CLOCK_THREAD_CPUTIME_ID 3
+#define CLOCK_MONOTONIC_RAW 4
+#define CLOCK_REALTIME_COARSE 5
+#define CLOCK_MONOTONIC_COARSE 6
+#define CLOCK_BOOTTIME 7
+#define CLOCK_REALTIME_ALARM 8
+#define CLOCK_BOOTTIME_ALARM 9
+#define CLOCK_HWSPECIFIC 10
+#define CLOCK_TAI 11
+#define NR_CLOCKIDS 12
+
+#define UNSUPPORTED 0xf00f
+
+char *clockstring(int clockid)
+{
+ switch (clockid) {
+ case CLOCK_REALTIME:
+ return "CLOCK_REALTIME";
+ case CLOCK_MONOTONIC:
+ return "CLOCK_MONOTONIC";
+ case CLOCK_PROCESS_CPUTIME_ID:
+ return "CLOCK_PROCESS_CPUTIME_ID";
+ case CLOCK_THREAD_CPUTIME_ID:
+ return "CLOCK_THREAD_CPUTIME_ID";
+ case CLOCK_MONOTONIC_RAW:
+ return "CLOCK_MONOTONIC_RAW";
+ case CLOCK_REALTIME_COARSE:
+ return "CLOCK_REALTIME_COARSE";
+ case CLOCK_MONOTONIC_COARSE:
+ return "CLOCK_MONOTONIC_COARSE";
+ case CLOCK_BOOTTIME:
+ return "CLOCK_BOOTTIME";
+ case CLOCK_REALTIME_ALARM:
+ return "CLOCK_REALTIME_ALARM";
+ case CLOCK_BOOTTIME_ALARM:
+ return "CLOCK_BOOTTIME_ALARM";
+ case CLOCK_TAI:
+ return "CLOCK_TAI";
+ };
+ return "UNKNOWN_CLOCKID";
+}
+
+struct timespec timespec_add(struct timespec ts, unsigned long long ns)
+{
+ ts.tv_nsec += ns;
+ while (ts.tv_nsec >= NSEC_PER_SEC) {
+ ts.tv_nsec -= NSEC_PER_SEC;
+ ts.tv_sec++;
+ }
+ return ts;
+}
+
+
+long long timespec_sub(struct timespec a, struct timespec b)
+{
+ long long ret = NSEC_PER_SEC * b.tv_sec + b.tv_nsec;
+
+ ret -= NSEC_PER_SEC * a.tv_sec + a.tv_nsec;
+ return ret;
+}
+
+int nanosleep_lat_test(int clockid, long long ns)
+{
+ struct timespec start, end, target;
+ long long latency = 0;
+ int i, count;
+
+ target.tv_sec = ns/NSEC_PER_SEC;
+ target.tv_nsec = ns%NSEC_PER_SEC;
+
+ if (clock_gettime(clockid, &start))
+ return UNSUPPORTED;
+ if (clock_nanosleep(clockid, 0, &target, NULL))
+ return UNSUPPORTED;
+
+ count = 10;
+
+ /* First check relative latency */
+ clock_gettime(clockid, &start);
+ for (i = 0; i < count; i++)
+ clock_nanosleep(clockid, 0, &target, NULL);
+ clock_gettime(clockid, &end);
+
+ if (((timespec_sub(start, end)/count)-ns) > UNRESONABLE_LATENCY) {
+ printf("Large rel latency: %lld ns :", (timespec_sub(start, end)/count)-ns);
+ return -1;
+ }
+
+ /* Next check absolute latency */
+ for (i = 0; i < count; i++) {
+ clock_gettime(clockid, &start);
+ target = timespec_add(start, ns);
+ clock_nanosleep(clockid, TIMER_ABSTIME, &target, NULL);
+ clock_gettime(clockid, &end);
+ latency += timespec_sub(target, end);
+ }
+
+ if (latency/count > UNRESONABLE_LATENCY) {
+ printf("Large abs latency: %lld ns :", latency/count);
+ return -1;
+ }
+
+ return 0;
+}
+
+
+
+int main(int argc, char **argv)
+{
+ long long length;
+ int clockid, ret;
+
+ for (clockid = CLOCK_REALTIME; clockid < NR_CLOCKIDS; clockid++) {
+
+ /* Skip cputime clockids since nanosleep won't increment cputime */
+ if (clockid == CLOCK_PROCESS_CPUTIME_ID ||
+ clockid == CLOCK_THREAD_CPUTIME_ID ||
+ clockid == CLOCK_HWSPECIFIC)
+ continue;
+
+ printf("nsleep latency %-26s ", clockstring(clockid));
+
+ length = 10;
+ while (length <= (NSEC_PER_SEC * 10)) {
+ ret = nanosleep_lat_test(clockid, length);
+ if (ret)
+ break;
+ length *= 100;
+
+ }
+
+ if (ret == UNSUPPORTED) {
+ printf("[UNSUPPORTED]\n");
+ continue;
+ }
+ if (ret < 0) {
+ printf("[FAILED]\n");
+ return ksft_exit_fail();
+ }
+ printf("[OK]\n");
+ }
+ return ksft_exit_pass();
+}
--
1.9.1
next prev parent reply other threads:[~2015-03-02 21:10 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-02 21:09 [PATCH 00/19 v3] Add timekeeping tests to kernel selftest John Stultz
2015-03-02 21:09 ` [PATCH 01/19] selftests/timers: Cleanup Makefile to make it easier to add future tests John Stultz
2015-03-02 21:09 ` [PATCH 02/19] selftests/timers: Quiet warning due to lack of return check on brk John Stultz
2015-03-02 21:09 ` [PATCH 03/19] selftests/timers: Add nanosleep test from timetest suite John Stultz
2015-03-02 21:09 ` [PATCH 04/19] selftests/timers: Add inconsistency-check test from timetests John Stultz
2015-03-02 21:09 ` John Stultz [this message]
2015-03-02 21:09 ` [PATCH 06/19] selftests/timers: Add clock skew estimation test from timetest suite John Stultz
2015-03-02 21:10 ` [PATCH 07/19] selftests/timers: Add set-timer-lat " John Stultz
2015-03-02 21:10 ` [PATCH 08/19] selftests/timers: Add threaded time inconsistency " John Stultz
2015-03-02 21:10 ` [PATCH 09/19] selftests/timers: Add mqueue latency test from the " John Stultz
2015-03-02 21:10 ` [PATCH 10/19] selftests/timers: Add adjtimex validation test from " John Stultz
2015-03-02 21:10 ` [PATCH 11/19] selftests/timers: Add alarmtimer-suspend test from timetests suite John Stultz
2015-03-02 21:10 ` [PATCH 12/19] selftests/timers: Add change_skew test from timetest suite John Stultz
2015-03-02 21:10 ` [PATCH 13/19] selftests/timers: Add skew_consistency test from the timetests suite John Stultz
2015-03-02 21:10 ` [PATCH 14/19] selftests/timers: Add clocksource-switch test from timetest suite John Stultz
2015-03-02 21:10 ` [PATCH 15/19] selftests/timers: Add leap-a-day " John Stultz
2015-03-02 21:10 ` [PATCH 16/19] selftests/timers: Add leapcrash test from the " John Stultz
2015-03-02 21:10 ` [PATCH 17/19] selftests/timers: Add set-tai " John Stultz
2015-03-02 21:10 ` [PATCH 18/19] selftests/timers: Add set-2038 test from " John Stultz
2015-03-02 21:10 ` [PATCH 19/19] MAINTAINERS: Add selftests/timers to the timekeeping maintainance list John Stultz
2015-03-03 12:14 ` [PATCH 00/19 v3] Add timekeeping tests to kernel selftest Prarit Bhargava
2015-03-11 16:43 ` Shuah Khan
2015-03-11 16:53 ` John Stultz
2015-03-11 17:04 ` Shuah Khan
2015-03-11 17:10 ` John Stultz
-- strict thread matches above, loose matches on Subject: below --
2015-03-12 0:39 [PATCH 00/19 v4] Add timekeeping tests to kernel selftests John Stultz
2015-03-12 0:40 ` [PATCH 05/19] selftests/timers: Add nsleep-lat test from timetest suite John Stultz
2015-02-25 22:32 [RFC][PATCH 00/19] Add timekeeping tests to kernel selftest John Stultz
2015-02-25 22:32 ` [PATCH 05/19] selftests/timers: Add nsleep-lat test from timetest suite John Stultz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1425330612-24280-6-git-send-email-john.stultz@linaro.org \
--to=john.stultz@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=prarit@redhat.com \
--cc=richardcochran@gmail.com \
--cc=shuahkh@osg.samsung.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox