From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752936AbbCMKDp (ORCPT ); Fri, 13 Mar 2015 06:03:45 -0400 Received: from mail-by2on0127.outbound.protection.outlook.com ([207.46.100.127]:53665 "EHLO na01-by2-obe.outbound.protection.outlook.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751019AbbCMKDj (ORCPT ); Fri, 13 Mar 2015 06:03:39 -0400 From: Jianwei Wang To: , , , CC: , , , Jianwei Wang , Alison Wang , Xiubo Li Subject: [PATCH 1/3] drm/layerscape: Add fsl dcu DRM driver Date: Fri, 13 Mar 2015 17:44:17 +0800 Message-ID: <1426239859-29254-1-git-send-email-b52261@freescale.com> X-Mailer: git-send-email 2.1.0.27.g96db324 MIME-Version: 1.0 Content-Type: text/plain; charset="y" Content-Transfer-Encoding: 8bit X-EOPAttributedMessage: 0 Authentication-Results: spf=fail (sender IP is 192.88.168.50) smtp.mailfrom=b52261@freescale.com; cmss.chinamobile.com; dkim=none (message not signed) header.d=none; X-Forefront-Antispam-Report: CIP:192.88.168.50;CTRY:US;IPV:NLI;EFV:NLI;BMV:1;SFV:NSPM;SFS:(10019020)(6009001)(339900001)(189002)(199003)(50466002)(87936001)(85426001)(5890100001)(19580395003)(6806004)(19580405001)(47776003)(33646002)(50986999)(229853001)(104016003)(50226001)(106466001)(105606002)(92566002)(77156002)(62966003)(575784001)(77096005)(46102003)(36756003)(42262002)(579004);DIR:OUT;SFP:1102;SCL:1;SRVR:CY1PR0301MB0873;H:tx30smr01.am.freescale.net;FPR:;SPF:Fail;MLV:sfv;MX:1;A:1;LANG:en; X-Microsoft-Antispam: UriScan:;BCL:0;PCL:0;RULEID:;SRVR:CY1PR0301MB0873;UriScan:;BCL:0;PCL:0;RULEID:;SRVR:CY1PR0301MB0761; X-Microsoft-Antispam-PRVS: X-Exchange-Antispam-Report-Test: UriScan:; X-Exchange-Antispam-Report-CFA-Test: BCL:0;PCL:0;RULEID:(601004)(5002009)(5005006);SRVR:CY1PR0301MB0873;BCL:0;PCL:0;RULEID:;SRVR:CY1PR0301MB0873; X-Forefront-PRVS: 05143A8241 X-MS-Exchange-CrossTenant-OriginalArrivalTime: 13 Mar 2015 09:47:59.5443 (UTC) X-MS-Exchange-CrossTenant-Id: 710a03f5-10f6-4d38-9ff4-a80b81da590d X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=710a03f5-10f6-4d38-9ff4-a80b81da590d;Ip=[192.88.168.50];Helo=[tx30smr01.am.freescale.net] X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem X-MS-Exchange-Transport-CrossTenantHeadersStamped: CY1PR0301MB0873 X-OriginatorOrg: freescale.com Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on Freescale SoCs. 2D-ACE is a Freescale display controller. It provide an hardware cursor. This is a simplified version, only a primary plane, a fb created for fbdev, a crtc, a connector for TFT LCD panel, an encoder, and the encoder is not in use. Signed-off-by: Alison Wang Signed-off-by: Xiubo Li Signed-off-by: Jianwei Wang --- Changed in v2:  - Add atomic support - Modify bindings file - Rename node for compatibility - Move platform related code out for compatibility Added in v1:  - Add support for DCU display controller on the Freescale LS102x SoCs. - Create a primary plane, a fb created for fbdev, a crtc, a connector for TFT LCD panel, an encoder. arch/arm/mach-imx/mach-ls1021a.c | 36 ++++ drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/fsl/Kconfig | 17 ++ drivers/gpu/drm/fsl/Makefile | 8 + drivers/gpu/drm/fsl/fsl_dcu_drm_connector.c | 203 ++++++++++++++++++++ drivers/gpu/drm/fsl/fsl_dcu_drm_connector.h | 28 +++ drivers/gpu/drm/fsl/fsl_dcu_drm_crtc.c | 164 ++++++++++++++++ drivers/gpu/drm/fsl/fsl_dcu_drm_crtc.h | 26 +++ drivers/gpu/drm/fsl/fsl_dcu_drm_drv.c | 288 ++++++++++++++++++++++++++++ drivers/gpu/drm/fsl/fsl_dcu_drm_drv.h | 168 ++++++++++++++++ drivers/gpu/drm/fsl/fsl_dcu_drm_fbdev.c | 26 +++ drivers/gpu/drm/fsl/fsl_dcu_drm_kms.c | 42 ++++ drivers/gpu/drm/fsl/fsl_dcu_drm_kms.h | 17 ++ drivers/gpu/drm/fsl/fsl_dcu_drm_plane.c | 187 ++++++++++++++++++ drivers/gpu/drm/fsl/fsl_dcu_drm_plane.h | 23 +++ include/linux/fsl/dcu.h | 22 +++ 17 files changed, 1258 insertions(+) create mode 100644 drivers/gpu/drm/fsl/Kconfig create mode 100644 drivers/gpu/drm/fsl/Makefile create mode 100644 drivers/gpu/drm/fsl/fsl_dcu_drm_connector.c create mode 100644 drivers/gpu/drm/fsl/fsl_dcu_drm_connector.h create mode 100644 drivers/gpu/drm/fsl/fsl_dcu_drm_crtc.c create mode 100644 drivers/gpu/drm/fsl/fsl_dcu_drm_crtc.h create mode 100644 drivers/gpu/drm/fsl/fsl_dcu_drm_drv.c create mode 100644 drivers/gpu/drm/fsl/fsl_dcu_drm_drv.h create mode 100644 drivers/gpu/drm/fsl/fsl_dcu_drm_fbdev.c create mode 100644 drivers/gpu/drm/fsl/fsl_dcu_drm_kms.c create mode 100644 drivers/gpu/drm/fsl/fsl_dcu_drm_kms.h create mode 100644 drivers/gpu/drm/fsl/fsl_dcu_drm_plane.c create mode 100644 drivers/gpu/drm/fsl/fsl_dcu_drm_plane.h create mode 100644 include/linux/fsl/dcu.h diff --git a/arch/arm/mach-imx/mach-ls1021a.c b/arch/arm/mach-imx/mach-ls1021a.c index b89c858..4fb346d 100644 --- a/arch/arm/mach-imx/mach-ls1021a.c +++ b/arch/arm/mach-imx/mach-ls1021a.c @@ -8,9 +8,44 @@ */ #include +#include +#include +#include +#include #include "common.h" +void dcu_pixclk_disable(void) +{ + struct regmap *scfg_regmap; + + scfg_regmap = syscon_regmap_lookup_by_compatible("fsl,ls1021a-scfg"); + if (IS_ERR(scfg_regmap)) { + pr_err("No syscfg phandle specified\n"); + return; + } + + regmap_write(scfg_regmap, SCFG_PIXCLKCR, PXCK_DISABLE); +} + +void dcu_pixclk_enable(void) +{ + struct regmap *scfg_regmap; + + scfg_regmap = syscon_regmap_lookup_by_compatible("fsl,ls1021a-scfg"); + if (IS_ERR(scfg_regmap)) { + pr_err("No syscfg phandle specified\n"); + return; + } + + regmap_write(scfg_regmap, SCFG_PIXCLKCR, PXCK_ENABLE); +} + +static void __init ls1021a_init_machine(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + dcu_pixclk_enable(); +} static const char * const ls1021a_dt_compat[] __initconst = { "fsl,ls1021a", NULL, @@ -18,5 +53,6 @@ static const char * const ls1021a_dt_compat[] __initconst = { DT_MACHINE_START(LS1021A, "Freescale LS1021A") .smp = smp_ops(ls1021a_smp_ops), + .init_machine = ls1021a_init_machine, .dt_compat = ls1021a_dt_compat, MACHINE_END diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 151a050..a6957aa 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -199,6 +199,8 @@ source "drivers/gpu/drm/bochs/Kconfig" source "drivers/gpu/drm/msm/Kconfig" +source "drivers/gpu/drm/fsl/Kconfig" + source "drivers/gpu/drm/tegra/Kconfig" source "drivers/gpu/drm/panel/Kconfig" diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index 2c239b9..ab5b9ef 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -56,6 +56,7 @@ obj-$(CONFIG_DRM_UDL) += udl/ obj-$(CONFIG_DRM_AST) += ast/ obj-$(CONFIG_DRM_ARMADA) += armada/ obj-$(CONFIG_DRM_ATMEL_HLCDC) += atmel-hlcdc/ +obj-$(CONFIG_DRM_FSL_DCU) += fsl/ obj-$(CONFIG_DRM_RCAR_DU) += rcar-du/ obj-$(CONFIG_DRM_SHMOBILE) +=shmobile/ obj-$(CONFIG_DRM_OMAP) += omapdrm/ diff --git a/drivers/gpu/drm/fsl/Kconfig b/drivers/gpu/drm/fsl/Kconfig new file mode 100644 index 0000000..e4f8df0 --- /dev/null +++ b/drivers/gpu/drm/fsl/Kconfig @@ -0,0 +1,17 @@ +config DRM_FSL_DCU + tristate "DRM Support for Freescale DCU" + depends on DRM && OF && ARM + select DRM_KMS_HELPER + select DRM_KMS_CMA_HELPER + select VIDEOMODE_HELPERS + select BACKLIGHT_CLASS_DEVICE + select BACKLIGHT_LCD_SUPPORT + select REGMAP_MMIO + select DRM_KMS_FB_HELPER + select FB_SYS_FILLRECT + select FB_SYS_COPYAREA + select FB_SYS_IMAGEBLIT + select FB_SYS_FOPS + help + Choose this option if you have an Freescale DCU chipset. + If M is selected the module will be called fsl-dcu-drm. diff --git a/drivers/gpu/drm/fsl/Makefile b/drivers/gpu/drm/fsl/Makefile new file mode 100644 index 0000000..5f74aee --- /dev/null +++ b/drivers/gpu/drm/fsl/Makefile @@ -0,0 +1,8 @@ +fsl-dcu-drm-y := fsl_dcu_drm_drv.o \ + fsl_dcu_drm_kms.o \ + fsl_dcu_drm_connector.o \ + fsl_dcu_drm_plane.o \ + fsl_dcu_drm_crtc.o \ + fsl_dcu_drm_fbdev.o \ + +obj-$(CONFIG_DRM_FSL_DCU) += fsl-dcu-drm.o diff --git a/drivers/gpu/drm/fsl/fsl_dcu_drm_connector.c b/drivers/gpu/drm/fsl/fsl_dcu_drm_connector.c new file mode 100644 index 0000000..178d647 --- /dev/null +++ b/drivers/gpu/drm/fsl/fsl_dcu_drm_connector.c @@ -0,0 +1,203 @@ +/* + * Copyright 2015 Freescale Semiconductor, Inc. + * + * Freescale DCU drm device driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include + +#include +#include +#include