From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
To: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
David Cohen <david.a.cohen@linux.intel.com>,
Stephen Boyd <sboyd@codeaurora.org>,
Baolu Lu <baolu.lu@linux.intel.com>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCHv2 02/12] usb: dwc3: USB2 PHY register access bits
Date: Wed, 18 Mar 2015 14:40:23 +0200 [thread overview]
Message-ID: <1426682433-133813-3-git-send-email-heikki.krogerus@linux.intel.com> (raw)
In-Reply-To: <1426682433-133813-1-git-send-email-heikki.krogerus@linux.intel.com>
Definitions for Global USB2 PHY Vendor Control Register
bits. We will need them to access ULPI PHY registers later.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
---
drivers/usb/dwc3/core.h | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index fdab715..747805d 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -174,6 +174,14 @@
#define DWC3_GUSB2PHYCFG_PHYSOFTRST (1 << 31)
#define DWC3_GUSB2PHYCFG_SUSPHY (1 << 6)
+/* Global USB2 PHY Vendor Control Register */
+#define DWC3_GUSB2PHYACC_NEWREGREQ (1 << 25)
+#define DWC3_GUSB2PHYACC_BUSY (1 << 23)
+#define DWC3_GUSB2PHYACC_WRITE (1 << 22)
+#define DWC3_GUSB2PHYACC_ADDR(n) (n << 16)
+#define DWC3_GUSB2PHYACC_EXTEND_ADDR(n) (n << 8)
+#define DWC3_GUSB2PHYACC_DATA(n) (n & 0xff)
+
/* Global USB3 PIPE Control Register */
#define DWC3_GUSB3PIPECTL_PHYSOFTRST (1 << 31)
#define DWC3_GUSB3PIPECTL_U2SSINP3OK (1 << 29)
--
2.1.4
next prev parent reply other threads:[~2015-03-18 12:44 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-18 12:40 [PATCHv2 00/12] usb: ulpi bus Heikki Krogerus
2015-03-18 12:40 ` [PATCHv2 01/12] usb: add bus type for USB ULPI Heikki Krogerus
2015-03-18 23:26 ` Paul Bolle
2015-03-19 11:44 ` Heikki Krogerus
2015-03-20 12:20 ` [PATCHv3 " Heikki Krogerus
2015-03-26 14:02 ` [PATCHv4 " Heikki Krogerus
2015-03-23 7:16 ` [PATCHv2 " Lu, Baolu
2015-03-23 10:57 ` Heikki Krogerus
2015-03-18 12:40 ` Heikki Krogerus [this message]
2015-03-18 12:40 ` [PATCHv2 03/12] usb: dwc3: ULPI or UTMI+ select Heikki Krogerus
2015-03-18 12:40 ` [PATCHv2 04/12] usb: dwc3: store driver data earlier Heikki Krogerus
2015-03-18 12:40 ` [PATCHv2 05/12] usb: dwc3: cache hwparams earlier Heikki Krogerus
2015-03-18 12:40 ` [PATCHv2 06/12] usb: dwc3: soft reset to it's own function Heikki Krogerus
2015-03-18 12:40 ` [PATCHv2 07/12] usb: dwc3: setup phys earlier Heikki Krogerus
2015-03-18 12:40 ` [PATCHv2 08/12] usb: dwc3: add hsphy_interface property Heikki Krogerus
2015-03-18 12:40 ` [PATCHv2 09/12] usb: dwc3: pci: add quirk for Baytrails Heikki Krogerus
2015-03-18 17:08 ` David Cohen
2015-03-19 11:51 ` Heikki Krogerus
2015-03-20 12:20 ` [PATCHv3 " Heikki Krogerus
2015-03-18 12:40 ` [PATCHv2 10/12] usb: dwc3: add ULPI interface support Heikki Krogerus
2015-03-18 22:53 ` Paul Bolle
2015-03-19 11:48 ` Heikki Krogerus
2015-03-20 12:20 ` [PATCHv3 " Heikki Krogerus
2015-03-18 12:40 ` [PATCHv2 11/12] phy: helpers for USB ULPI PHY registering Heikki Krogerus
2015-03-18 14:46 ` Sergei Shtylyov
2015-03-18 16:54 ` David Cohen
2015-03-18 18:02 ` Sergei Shtylyov
2015-03-18 12:40 ` [PATCHv2 12/12] phy: add driver for TI TUSB1210 ULPI PHY Heikki Krogerus
2015-03-18 17:12 ` [PATCHv2 00/12] usb: ulpi bus David Cohen
2015-03-18 17:19 ` David Cohen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1426682433-133813-3-git-send-email-heikki.krogerus@linux.intel.com \
--to=heikki.krogerus@linux.intel.com \
--cc=balbi@ti.com \
--cc=baolu.lu@linux.intel.com \
--cc=david.a.cohen@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).