[PATCH v2 0/5] wm5110 Boot Fixups Part 2

[Charles Keepax <ckeepax@opensource.wolfsonmicro.com>]

Hi,

This series replaces the reset patch Mark commented on in the
early versions (see [1]) of the wm5110 boot series being reviewed
at the moment.

Basically, this series allows the CODEC to completely power
off if nothing is using it. This should cover the case where
system suspend powers the regulators down causing a second cold
boot.

NOTE: This series is dependent on the other series being reviewed
starting with:

mfd: arizona: Factor out SYSCLK enable from wm5102 hardware patch

Thanks,
Charles

Changes since v1:
 - Use devres for the reset GPIO

[1] https://lkml.org/lkml/2015/3/16/811

Charles Keepax (5):
  mfd: arizona: Use devres to manage reset GPIO
  mfd: wm5102: Move check for custom boot into arizona_wait_for_boot
  mfd: arizona: Factor out hard reset into helper functions
  mfd: arizona: Add better support for system suspend
  mfd: wm5110: Add delay before releasing reset line

 drivers/mfd/arizona-core.c       |  143 +++++++++++++++++++++++++++-----------
 include/linux/mfd/arizona/core.h |    1 +
 2 files changed, 103 insertions(+), 41 deletions(-)

-- 
1.7.2.5