From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
To: lee.jones@linaro.org
Cc: sameo@linux.intel.com, broonie@kernel.org, lgirdwood@gmail.com,
patches@opensource.wolfsonmicro.com,
linux-kernel@vger.kernel.org
Subject: [PATCH 4/9] mfd: arizona: Factor out SYSCLK enable from wm5102 hardware patch
Date: Wed, 8 Apr 2015 16:56:13 +0100 [thread overview]
Message-ID: <1428508578-21022-5-git-send-email-ckeepax@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1428508578-21022-1-git-send-email-ckeepax@opensource.wolfsonmicro.com>
wm5102 applies a custom hardware boot sequence, for this the SYSCLK
needs to be enabled. This patch factors out the code that enables
SYSCLK for this sequence such that it can be used for other boot time
operations that require SYSCLK.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---
drivers/mfd/arizona-core.c | 106 +++++++++++++++++++++++++++++---------------
1 files changed, 70 insertions(+), 36 deletions(-)
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index 73418bd..f1d9ef0 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -264,20 +264,26 @@ static void arizona_disable_reset(struct arizona *arizona)
}
}
-static int arizona_apply_hardware_patch(struct arizona* arizona)
+struct arizona_sysclk_state {
+ unsigned int fll;
+ unsigned int sysclk;
+};
+
+static int arizona_enable_freerun_sysclk(struct arizona *arizona,
+ struct arizona_sysclk_state *state)
{
- unsigned int fll, sysclk;
int ret, err;
/* Cache existing FLL and SYSCLK settings */
- ret = regmap_read(arizona->regmap, ARIZONA_FLL1_CONTROL_1, &fll);
- if (ret != 0) {
+ ret = regmap_read(arizona->regmap, ARIZONA_FLL1_CONTROL_1, &state->fll);
+ if (ret) {
dev_err(arizona->dev, "Failed to cache FLL settings: %d\n",
ret);
return ret;
}
- ret = regmap_read(arizona->regmap, ARIZONA_SYSTEM_CLOCK_1, &sysclk);
- if (ret != 0) {
+ ret = regmap_read(arizona->regmap, ARIZONA_SYSTEM_CLOCK_1,
+ &state->sysclk);
+ if (ret) {
dev_err(arizona->dev, "Failed to cache SYSCLK settings: %d\n",
ret);
return ret;
@@ -286,7 +292,7 @@ static int arizona_apply_hardware_patch(struct arizona* arizona)
/* Start up SYSCLK using the FLL in free running mode */
ret = regmap_write(arizona->regmap, ARIZONA_FLL1_CONTROL_1,
ARIZONA_FLL1_ENA | ARIZONA_FLL1_FREERUN);
- if (ret != 0) {
+ if (ret) {
dev_err(arizona->dev,
"Failed to start FLL in freerunning mode: %d\n",
ret);
@@ -295,53 +301,81 @@ static int arizona_apply_hardware_patch(struct arizona* arizona)
ret = arizona_poll_reg(arizona, 25, ARIZONA_INTERRUPT_RAW_STATUS_5,
ARIZONA_FLL1_CLOCK_OK_STS,
ARIZONA_FLL1_CLOCK_OK_STS);
- if (ret != 0) {
+ if (ret) {
ret = -ETIMEDOUT;
goto err_fll;
}
ret = regmap_write(arizona->regmap, ARIZONA_SYSTEM_CLOCK_1, 0x0144);
- if (ret != 0) {
+ if (ret) {
dev_err(arizona->dev, "Failed to start SYSCLK: %d\n", ret);
goto err_fll;
}
+ return 0;
+
+err_fll:
+ err = regmap_write(arizona->regmap, ARIZONA_FLL1_CONTROL_1, state->fll);
+ if (err)
+ dev_err(arizona->dev,
+ "Failed to re-apply old FLL settings: %d\n", err);
+
+ return ret;
+}
+
+static int arizona_disable_freerun_sysclk(struct arizona *arizona,
+ struct arizona_sysclk_state *state)
+{
+ int ret;
+
+ ret = regmap_write(arizona->regmap, ARIZONA_SYSTEM_CLOCK_1,
+ state->sysclk);
+ if (ret) {
+ dev_err(arizona->dev,
+ "Failed to re-apply old SYSCLK settings: %d\n", ret);
+ return ret;
+ }
+
+ ret = regmap_write(arizona->regmap, ARIZONA_FLL1_CONTROL_1, state->fll);
+ if (ret) {
+ dev_err(arizona->dev,
+ "Failed to re-apply old FLL settings: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int wm5102_apply_hardware_patch(struct arizona *arizona)
+{
+ struct arizona_sysclk_state state;
+ int err, ret;
+
+ ret = arizona_enable_freerun_sysclk(arizona, &state);
+ if (ret)
+ return ret;
+
/* Start the write sequencer and wait for it to finish */
ret = regmap_write(arizona->regmap, ARIZONA_WRITE_SEQUENCER_CTRL_0,
ARIZONA_WSEQ_ENA | ARIZONA_WSEQ_START | 160);
- if (ret != 0) {
+ if (ret) {
dev_err(arizona->dev, "Failed to start write sequencer: %d\n",
ret);
- goto err_sysclk;
+ goto err;
}
+
ret = arizona_poll_reg(arizona, 5, ARIZONA_WRITE_SEQUENCER_CTRL_1,
ARIZONA_WSEQ_BUSY, 0);
- if (ret != 0) {
+ if (ret) {
regmap_write(arizona->regmap, ARIZONA_WRITE_SEQUENCER_CTRL_0,
- ARIZONA_WSEQ_ABORT);
+ ARIZONA_WSEQ_ABORT);
ret = -ETIMEDOUT;
}
-err_sysclk:
- err = regmap_write(arizona->regmap, ARIZONA_SYSTEM_CLOCK_1, sysclk);
- if (err != 0) {
- dev_err(arizona->dev,
- "Failed to re-apply old SYSCLK settings: %d\n",
- err);
- }
-
-err_fll:
- err = regmap_write(arizona->regmap, ARIZONA_FLL1_CONTROL_1, fll);
- if (err != 0) {
- dev_err(arizona->dev,
- "Failed to re-apply old FLL settings: %d\n",
- err);
- }
+err:
+ err = arizona_disable_freerun_sysclk(arizona, &state);
- if (ret != 0)
- return ret;
- else
- return err;
+ return ret ?: err;
}
static int wm5102_clear_write_sequencer(struct arizona *arizona)
@@ -407,8 +441,8 @@ static int arizona_runtime_resume(struct device *dev)
goto err;
}
- ret = arizona_apply_hardware_patch(arizona);
- if (ret != 0) {
+ ret = wm5102_apply_hardware_patch(arizona);
+ if (ret) {
dev_err(arizona->dev,
"Failed to apply hardware patch: %d\n",
ret);
@@ -932,8 +966,8 @@ int arizona_dev_init(struct arizona *arizona)
switch (arizona->type) {
case WM5102:
- ret = arizona_apply_hardware_patch(arizona);
- if (ret != 0) {
+ ret = wm5102_apply_hardware_patch(arizona);
+ if (ret) {
dev_err(arizona->dev,
"Failed to apply hardware patch: %d\n",
ret);
--
1.7.2.5
next prev parent reply other threads:[~2015-04-08 16:04 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-08 15:56 [PATCH 0/9] wm5110 Boot Fixups Charles Keepax
2015-04-08 15:56 ` [PATCH 1/9] mfd: arizona: Use devres to manage reset GPIO Charles Keepax
2015-04-08 15:56 ` [PATCH 2/9] mfd: arizona: Factor out hard reset into helper functions Charles Keepax
2015-04-08 15:56 ` [PATCH 3/9] mfd: wm5102: Ensure we always boot the device fully Charles Keepax
2015-04-08 15:56 ` Charles Keepax [this message]
2015-04-08 15:56 ` [PATCH 5/9] mfd: wm5110: Add register patch required for low power sleep Charles Keepax
2015-04-17 8:09 ` Charles Keepax
2015-04-08 15:56 ` [PATCH 6/9] regulator: arizona-ldo1: Add additional supported voltage Charles Keepax
2015-04-08 15:56 ` [PATCH 7/9] mfd: wm5110: Set DCVDD voltage to 1.175V before entering sleep mode Charles Keepax
2015-04-08 15:56 ` [PATCH 8/9] mfd: arizona: Add better support for system suspend Charles Keepax
2015-04-08 15:56 ` [PATCH 9/9] mfd: wm5110: Add delay before releasing reset line Charles Keepax
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1428508578-21022-5-git-send-email-ckeepax@opensource.wolfsonmicro.com \
--to=ckeepax@opensource.wolfsonmicro.com \
--cc=broonie@kernel.org \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.wolfsonmicro.com \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox