From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
To: Felipe Balbi <balbi@ti.com>
Cc: David Cohen <david.a.cohen@linux.intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Stephen Boyd <sboyd@codeaurora.org>,
Baolu Lu <baolu.lu@linux.intel.com>,
Paul Bolle <pebolle@tiscali.nl>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCHv3 00/12] usb: ulpi bus
Date: Tue, 28 Apr 2015 16:24:35 +0300 [thread overview]
Message-ID: <1430227486-225197-1-git-send-email-heikki.krogerus@linux.intel.com> (raw)
Hi,
I took the liberty of adding David's ACK to everything except 9/12, including to
the 1/12 (removing the module handling has no functional affect).
Changes since v2:
- remove module handling from the bus driver as suggested by Paul Bolle.
- reordered the gpio requests in BYT quirk as suggested by David Cohen.
Major changes since v1:
- calling dwc3_phy_setup earlier and registering the ULPI interface there.
- new property to dwc3 for selecting the interface in case of UTMI+ and ULPI as
suggested by Felipe
- dwc3 soft reset before registration of the ULPI interface to sync the clocks
as suggested by David
- Including support for the BYT boards that have the GPIOs controlling the reset
and cs signals.
Heikki Krogerus (12):
usb: add bus type for USB ULPI
usb: dwc3: USB2 PHY register access bits
usb: dwc3: ULPI or UTMI+ select
usb: dwc3: store driver data earlier
usb: dwc3: cache hwparams earlier
usb: dwc3: soft reset to it's own function
usb: dwc3: setup phys earlier
usb: dwc3: add hsphy_interface property
usb: dwc3: pci: add quirk for Baytrails
usb: dwc3: add ULPI interface support
phy: helpers for USB ULPI PHY registering
phy: add driver for TI TUSB1210 ULPI PHY
Documentation/devicetree/bindings/usb/dwc3.txt | 2 +
MAINTAINERS | 7 +
drivers/phy/Kconfig | 7 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-tusb1210.c | 153 +++++++++++++++
drivers/phy/ulpi_phy.h | 31 ++++
drivers/usb/common/Makefile | 1 +
drivers/usb/common/ulpi.c | 246 +++++++++++++++++++++++++
drivers/usb/core/Kconfig | 8 +
drivers/usb/dwc3/Kconfig | 7 +
drivers/usb/dwc3/Makefile | 4 +
drivers/usb/dwc3/core.c | 99 +++++++---
drivers/usb/dwc3/core.h | 26 +++
drivers/usb/dwc3/dwc3-pci.c | 36 ++++
drivers/usb/dwc3/platform_data.h | 2 +
drivers/usb/dwc3/ulpi.c | 91 +++++++++
include/linux/mod_devicetable.h | 6 +
include/linux/ulpi/driver.h | 62 +++++++
include/linux/ulpi/interface.h | 23 +++
include/linux/ulpi/regs.h | 130 +++++++++++++
include/linux/usb/ulpi.h | 134 +-------------
scripts/mod/devicetable-offsets.c | 4 +
scripts/mod/file2alias.c | 13 ++
23 files changed, 936 insertions(+), 157 deletions(-)
create mode 100644 drivers/phy/phy-tusb1210.c
create mode 100644 drivers/phy/ulpi_phy.h
create mode 100644 drivers/usb/common/ulpi.c
create mode 100644 drivers/usb/dwc3/ulpi.c
create mode 100644 include/linux/ulpi/driver.h
create mode 100644 include/linux/ulpi/interface.h
create mode 100644 include/linux/ulpi/regs.h
--
2.1.4
next reply other threads:[~2015-04-28 13:24 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-28 13:24 Heikki Krogerus [this message]
2015-04-28 13:24 ` [PATCHv3 01/11] usb: add bus type for USB ULPI Heikki Krogerus
2015-04-29 20:13 ` Felipe Balbi
2015-04-30 10:37 ` Heikki Krogerus
2015-04-28 13:24 ` [PATCHv3 02/11] usb: dwc3: USB2 PHY register access bits Heikki Krogerus
2015-04-28 13:24 ` [PATCHv3 03/11] usb: dwc3: ULPI or UTMI+ select Heikki Krogerus
2015-04-28 13:24 ` [PATCHv3 04/11] usb: dwc3: store driver data earlier Heikki Krogerus
2015-04-28 13:24 ` [PATCHv3 05/11] usb: dwc3: cache hwparams earlier Heikki Krogerus
2015-04-28 13:24 ` [PATCHv3 06/11] usb: dwc3: soft reset to it's own function Heikki Krogerus
2015-04-28 17:22 ` Felipe Balbi
2015-04-29 8:16 ` Heikki Krogerus
2015-04-28 13:24 ` [PATCHv3 07/11] usb: dwc3: setup phys earlier Heikki Krogerus
2015-04-28 13:24 ` [PATCHv3 08/11] usb: dwc3: add hsphy_interface property Heikki Krogerus
2015-04-28 17:13 ` Felipe Balbi
2015-04-29 8:04 ` Heikki Krogerus
2015-04-28 13:24 ` [PATCHv3 09/11] usb: dwc3: pci: add quirk for Baytrails Heikki Krogerus
2015-04-28 13:24 ` [PATCHv3 10/11] phy: helpers for USB ULPI PHY registering Heikki Krogerus
2015-04-28 13:24 ` [PATCHv3 11/11] phy: add driver for TI TUSB1210 ULPI PHY Heikki Krogerus
2015-04-28 17:17 ` [PATCHv3 00/12] usb: ulpi bus Felipe Balbi
2015-04-29 8:21 ` Heikki Krogerus
2015-04-29 8:30 ` [PATCHv3 08/12] usb: dwc3: add hsphy_interface property Heikki Krogerus
2015-04-29 15:03 ` Felipe Balbi
2015-04-30 10:33 ` Heikki Krogerus
2015-04-29 8:30 ` [PATCHv3 09/12] usb: dwc3: pci: add quirk for Baytrails Heikki Krogerus
2015-04-29 8:30 ` [PATCHv3 10/12] usb: dwc3: add ULPI interface support Heikki Krogerus
2015-04-29 15:04 ` Felipe Balbi
2015-04-30 10:34 ` Heikki Krogerus
2015-04-30 14:54 ` Felipe Balbi
2015-05-04 12:03 ` Heikki Krogerus
2015-05-05 15:02 ` Felipe Balbi
2015-04-29 8:30 ` [PATCHv3 11/12] phy: helpers for USB ULPI PHY registering Heikki Krogerus
2015-04-29 8:30 ` [PATCHv3 12/12] phy: add driver for TI TUSB1210 ULPI PHY Heikki Krogerus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1430227486-225197-1-git-send-email-heikki.krogerus@linux.intel.com \
--to=heikki.krogerus@linux.intel.com \
--cc=balbi@ti.com \
--cc=baolu.lu@linux.intel.com \
--cc=david.a.cohen@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=pebolle@tiscali.nl \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).