[PATCH v3 00/10] wm5110 Boot Fixups

[Charles Keepax <ckeepax@opensource.wolfsonmicro.com>]

Ok so I have completed the rework to the second of the two patch
chains on this and pulled them back together into one series.

Note the main difference is I have pulled a couple patches from
the second series to the start of the chain. This is because of
patch 3 which is a bug fix for 5102 I have discovered whilst
working through this better system suspend support stuff.

Changes since v2:
 - Add comment for sleep in reset disable
 - Split out formatting changes and functional changes in patch 4

Changes since v1:
 - Just updated the return of wm5110_apply_sleep_patch to use the
   ternary as per Lee's preference.

Thanks,
Charles

Charles Keepax (10):
  mfd: arizona: Use devres to manage reset GPIO
  mfd: arizona: Factor out hard reset into helper functions
  mfd: wm5102: Ensure we always boot the device fully
  mfd: arizona: Fix formating/style issues in arizona_apply_hardware_patch
  mfd: arizona: Factor out SYSCLK enable from wm5102 hardware patch
  mfd: wm5110: Add register patch required for low power sleep
  regulator: arizona-ldo1: Add additional supported voltage
  mfd: wm5110: Set DCVDD voltage to 1.175V before entering sleep mode
  mfd: arizona: Add better support for system suspend
  mfd: wm5110: Add delay before releasing reset line

 drivers/mfd/arizona-core.c       |  344 +++++++++++++++++++++++++++++++------
 drivers/regulator/arizona-ldo1.c |   15 ++
 include/linux/mfd/arizona/core.h |    1 +
 3 files changed, 304 insertions(+), 56 deletions(-)

-- 
1.7.2.5