From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
To: lee.jones@linaro.org
Cc: sameo@linux.intel.com, broonie@kernel.org, lgirdwood@gmail.com,
patches@opensource.wolfsonmicro.com,
linux-kernel@vger.kernel.org
Subject: [PATCH v3 06/10] mfd: wm5110: Add register patch required for low power sleep
Date: Thu, 30 Apr 2015 10:48:03 +0100 [thread overview]
Message-ID: <1430387287-27777-7-git-send-email-ckeepax@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1430387287-27777-1-git-send-email-ckeepax@opensource.wolfsonmicro.com>
Some register settings must be applied before the first time low power
sleep mode is entered on the wm5110 to ensure optimium performance.
These settings require SYSCLK to be enabled whilst they are being
applied. This patch applies the settings using the recently factored out
boot time SYSCLK functionality.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
drivers/mfd/arizona-core.c | 39 +++++++++++++++++++++++++++++++++++++++
1 files changed, 39 insertions(+), 0 deletions(-)
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index b5a7e0e..c80ab79 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -378,6 +378,35 @@ err:
return ret ?: err;
}
+/*
+ * Register patch to some of the CODECs internal write sequences
+ * to ensure a clean exit from the low power sleep state.
+ */
+static const struct reg_default wm5110_sleep_patch[] = {
+ { 0x337A, 0xC100 },
+ { 0x337B, 0x0041 },
+ { 0x3300, 0xA210 },
+ { 0x3301, 0x050C },
+};
+
+static int wm5110_apply_sleep_patch(struct arizona *arizona)
+{
+ struct arizona_sysclk_state state;
+ int err, ret;
+
+ ret = arizona_enable_freerun_sysclk(arizona, &state);
+ if (ret)
+ return ret;
+
+ ret = regmap_multi_reg_write_bypassed(arizona->regmap,
+ wm5110_sleep_patch,
+ ARRAY_SIZE(wm5110_sleep_patch));
+
+ err = arizona_disable_freerun_sysclk(arizona, &state);
+
+ return ret ?: err;
+}
+
static int wm5102_clear_write_sequencer(struct arizona *arizona)
{
int ret;
@@ -966,6 +995,16 @@ int arizona_dev_init(struct arizona *arizona)
goto err_reset;
}
break;
+ case WM5110:
+ case WM8280:
+ ret = wm5110_apply_sleep_patch(arizona);
+ if (ret) {
+ dev_err(arizona->dev,
+ "Failed to apply sleep patch: %d\n",
+ ret);
+ goto err_reset;
+ }
+ break;
default:
break;
}
--
1.7.2.5
next prev parent reply other threads:[~2015-04-30 9:56 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-30 9:47 [PATCH v3 00/10] wm5110 Boot Fixups Charles Keepax
2015-04-30 9:47 ` [PATCH v3 01/10] mfd: arizona: Use devres to manage reset GPIO Charles Keepax
2015-04-30 9:47 ` [PATCH v3 02/10] mfd: arizona: Factor out hard reset into helper functions Charles Keepax
2015-04-30 9:48 ` [PATCH v3 03/10] mfd: wm5102: Ensure we always boot the device fully Charles Keepax
2015-04-30 9:48 ` [PATCH v3 04/10] mfd: arizona: Fix formating/style issues in arizona_apply_hardware_patch Charles Keepax
2015-04-30 9:48 ` [PATCH v3 05/10] mfd: arizona: Factor out SYSCLK enable from wm5102 hardware patch Charles Keepax
2015-04-30 9:48 ` Charles Keepax [this message]
2015-04-30 9:48 ` [PATCH v3 07/10] regulator: arizona-ldo1: Add additional supported voltage Charles Keepax
2015-04-30 9:48 ` [PATCH v3 08/10] mfd: wm5110: Set DCVDD voltage to 1.175V before entering sleep mode Charles Keepax
2015-04-30 9:48 ` [PATCH v3 09/10] mfd: arizona: Add better support for system suspend Charles Keepax
2015-04-30 9:48 ` [PATCH v3 10/10] mfd: wm5110: Add delay before releasing reset line Charles Keepax
2015-04-30 10:08 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1430387287-27777-7-git-send-email-ckeepax@opensource.wolfsonmicro.com \
--to=ckeepax@opensource.wolfsonmicro.com \
--cc=broonie@kernel.org \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.wolfsonmicro.com \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox