[PATCH] rnndb: Add 28nm PLL register description

public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed

From: Stephane Viau <sviau@codeaurora.org>
To: dri-devel@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
	robdclark@gmail.com, Stephane Viau <sviau@codeaurora.org>
Subject: [PATCH] rnndb: Add 28nm PLL register description
Date: Fri,  1 May 2015 17:43:03 -0400	[thread overview]
Message-ID: <1430516583-6299-1-git-send-email-sviau@codeaurora.org> (raw)
In-Reply-To: <1430516426-6093-1-git-send-email-sviau@codeaurora.org>

Each interface (DSI/eDP/HDMI) has to control its own PLL.
This change only add the register description for each one of them.

Let's not make the register description common as some registers
may not be implemented the same way for each interface PHY.

Signed-off-by: Stephane Viau <sviau@codeaurora.org>
---
 rnndb/dsi/dsi.xml   | 66 +++++++++++++++++++++++++++++++++++++++++++++++++++++
 rnndb/edp/edp.xml   | 51 +++++++++++++++++++++++++++++++++++++++++
 rnndb/hdmi/hdmi.xml | 51 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 168 insertions(+)

diff --git a/rnndb/dsi/dsi.xml b/rnndb/dsi/dsi.xml
index 480ec46..ce6085a 100644
--- a/rnndb/dsi/dsi.xml
+++ b/rnndb/dsi/dsi.xml
@@ -442,4 +442,70 @@ xsi:schemaLocation="http://nouveau.freedesktop.org/ rules-ng.xsd">
 	<reg32 offset="0x00018" name="CAL_PWR_CFG"/>
 </domain>
 
+<domain name="DSI_28nm_PHY_PLL" width="32">
+	<reg32 offset="0x00000" name="REFCLK_CFG"/>
+	<reg32 offset="0x00004" name="POSTDIV1_CFG"/>
+	<reg32 offset="0x00008" name="CHGPUMP_CFG"/>
+	<reg32 offset="0x0000C" name="VCOLPF_CFG"/>
+	<reg32 offset="0x00010" name="VREG_CFG"/>
+	<reg32 offset="0x00014" name="PWRGEN_CFG"/>
+	<reg32 offset="0x00018" name="DMUX_CFG"/>
+	<reg32 offset="0x0001C" name="AMUX_CFG"/>
+	<reg32 offset="0x00020" name="GLB_CFG">
+		<bitfield name="PLL_PWRDN_B" pos="0" type="boolean"/>
+		<bitfield name="PLL_LDO_PWRDN_B" pos="1" type="boolean"/>
+		<bitfield name="PLL_PWRGEN_PWRDN_B" pos="2" type="boolean"/>
+		<bitfield name="PLL_ENABLE" pos="3" type="boolean"/>
+	</reg32>
+	<reg32 offset="0x00024" name="POSTDIV2_CFG"/>
+	<reg32 offset="0x00028" name="POSTDIV3_CFG"/>
+	<reg32 offset="0x0002C" name="LPFR_CFG"/>
+	<reg32 offset="0x00030" name="LPFC1_CFG"/>
+	<reg32 offset="0x00034" name="LPFC2_CFG"/>
+	<reg32 offset="0x00038" name="SDM_CFG0"/>
+	<reg32 offset="0x0003C" name="SDM_CFG1"/>
+	<reg32 offset="0x00040" name="SDM_CFG2"/>
+	<reg32 offset="0x00044" name="SDM_CFG3"/>
+	<reg32 offset="0x00048" name="SDM_CFG4"/>
+	<reg32 offset="0x0004C" name="SSC_CFG0"/>
+	<reg32 offset="0x00050" name="SSC_CFG1"/>
+	<reg32 offset="0x00054" name="SSC_CFG2"/>
+	<reg32 offset="0x00058" name="SSC_CFG3"/>
+	<reg32 offset="0x0005C" name="LKDET_CFG0"/>
+	<reg32 offset="0x00060" name="LKDET_CFG1"/>
+	<reg32 offset="0x00064" name="LKDET_CFG2"/>
+	<reg32 offset="0x00068" name="TEST_CFG">
+		<bitfield name="PLL_SW_RESET" pos="0" type="boolean"/>
+	</reg32>
+	<reg32 offset="0x0006C" name="CAL_CFG0"/>
+	<reg32 offset="0x00070" name="CAL_CFG1"/>
+	<reg32 offset="0x00074" name="CAL_CFG2"/>
+	<reg32 offset="0x00078" name="CAL_CFG3"/>
+	<reg32 offset="0x0007C" name="CAL_CFG4"/>
+	<reg32 offset="0x00080" name="CAL_CFG5"/>
+	<reg32 offset="0x00084" name="CAL_CFG6"/>
+	<reg32 offset="0x00088" name="CAL_CFG7"/>
+	<reg32 offset="0x0008C" name="CAL_CFG8"/>
+	<reg32 offset="0x00090" name="CAL_CFG9"/>
+	<reg32 offset="0x00094" name="CAL_CFG10"/>
+	<reg32 offset="0x00098" name="CAL_CFG11"/>
+	<reg32 offset="0x0009C" name="EFUSE_CFG"/>
+	<reg32 offset="0x000A0" name="DEBUG_BUS_SEL"/>
+	<reg32 offset="0x000A4" name="CTRL_42"/>
+	<reg32 offset="0x000A8" name="CTRL_43"/>
+	<reg32 offset="0x000AC" name="CTRL_44"/>
+	<reg32 offset="0x000B0" name="CTRL_45"/>
+	<reg32 offset="0x000B4" name="CTRL_46"/>
+	<reg32 offset="0x000B8" name="CTRL_47"/>
+	<reg32 offset="0x000BC" name="CTRL_48"/>
+	<reg32 offset="0x000C0" name="STATUS">
+		<bitfield name="PLL_RDY" pos="0" type="boolean"/>
+	</reg32>
+	<reg32 offset="0x000C4" name="DEBUG_BUS0"/>
+	<reg32 offset="0x000C8" name="DEBUG_BUS1"/>
+	<reg32 offset="0x000CC" name="DEBUG_BUS2"/>
+	<reg32 offset="0x000D0" name="DEBUG_BUS3"/>
+	<reg32 offset="0x000D4" name="CTRL_54"/>
+</domain>
+
 </database>
diff --git a/rnndb/edp/edp.xml b/rnndb/edp/edp.xml
index ea2a74b..00fc611 100644
--- a/rnndb/edp/edp.xml
+++ b/rnndb/edp/edp.xml
@@ -185,4 +185,55 @@ xsi:schemaLocation="http://nouveau.freedesktop.org/ rules-ng.xsd">
 	<reg32 offset="0x0598" name="GLB_PHY_STATUS"/>
 </domain>
 
+<domain name="EDP_28nm_PHY_PLL" width="32">
+	<reg32 offset="0x00000" name="REFCLK_CFG"/>
+	<reg32 offset="0x00004" name="POSTDIV1_CFG"/>
+	<reg32 offset="0x00008" name="CHGPUMP_CFG"/>
+	<reg32 offset="0x0000C" name="VCOLPF_CFG"/>
+	<reg32 offset="0x00010" name="VREG_CFG"/>
+	<reg32 offset="0x00014" name="PWRGEN_CFG"/>
+	<reg32 offset="0x00018" name="DMUX_CFG"/>
+	<reg32 offset="0x0001C" name="AMUX_CFG"/>
+	<reg32 offset="0x00020" name="GLB_CFG">
+		<bitfield name="PLL_PWRDN_B" pos="0" type="boolean"/>
+		<bitfield name="PLL_LDO_PWRDN_B" pos="1" type="boolean"/>
+		<bitfield name="PLL_PWRGEN_PWRDN_B" pos="2" type="boolean"/>
+		<bitfield name="PLL_ENABLE" pos="3" type="boolean"/>
+	</reg32>
+	<reg32 offset="0x00024" name="POSTDIV2_CFG"/>
+	<reg32 offset="0x00028" name="POSTDIV3_CFG"/>
+	<reg32 offset="0x0002C" name="LPFR_CFG"/>
+	<reg32 offset="0x00030" name="LPFC1_CFG"/>
+	<reg32 offset="0x00034" name="LPFC2_CFG"/>
+	<reg32 offset="0x00038" name="SDM_CFG0"/>
+	<reg32 offset="0x0003C" name="SDM_CFG1"/>
+	<reg32 offset="0x00040" name="SDM_CFG2"/>
+	<reg32 offset="0x00044" name="SDM_CFG3"/>
+	<reg32 offset="0x00048" name="SDM_CFG4"/>
+	<reg32 offset="0x0004C" name="SSC_CFG0"/>
+	<reg32 offset="0x00050" name="SSC_CFG1"/>
+	<reg32 offset="0x00054" name="SSC_CFG2"/>
+	<reg32 offset="0x00058" name="SSC_CFG3"/>
+	<reg32 offset="0x0005C" name="LKDET_CFG0"/>
+	<reg32 offset="0x00060" name="LKDET_CFG1"/>
+	<reg32 offset="0x00064" name="LKDET_CFG2"/>
+	<reg32 offset="0x00068" name="TEST_CFG">
+		<bitfield name="PLL_SW_RESET" pos="0" type="boolean"/>
+	</reg32>
+	<reg32 offset="0x0006C" name="CAL_CFG0"/>
+	<reg32 offset="0x00070" name="CAL_CFG1"/>
+	<reg32 offset="0x00074" name="CAL_CFG2"/>
+	<reg32 offset="0x00078" name="CAL_CFG3"/>
+	<reg32 offset="0x0007C" name="CAL_CFG4"/>
+	<reg32 offset="0x00080" name="CAL_CFG5"/>
+	<reg32 offset="0x00084" name="CAL_CFG6"/>
+	<reg32 offset="0x00088" name="CAL_CFG7"/>
+	<reg32 offset="0x0008C" name="CAL_CFG8"/>
+	<reg32 offset="0x00090" name="CAL_CFG9"/>
+	<reg32 offset="0x00094" name="CAL_CFG10"/>
+	<reg32 offset="0x00098" name="CAL_CFG11"/>
+	<reg32 offset="0x0009C" name="EFUSE_CFG"/>
+	<reg32 offset="0x000A0" name="DEBUG_BUS_SEL"/>
+</domain>
+
 </database>
diff --git a/rnndb/hdmi/hdmi.xml b/rnndb/hdmi/hdmi.xml
index 9ac5e00..d3336a9 100644
--- a/rnndb/hdmi/hdmi.xml
+++ b/rnndb/hdmi/hdmi.xml
@@ -640,4 +640,55 @@ xsi:schemaLocation="http://nouveau.freedesktop.org/ rules-ng.xsd">
 	<reg32 offset="0x00048" name="BIST_PATN3"/>
 </domain>
 
+<domain name="HDMI_28nm_PHY_PLL" width="32">
+	<reg32 offset="0x00000" name="REFCLK_CFG"/>
+	<reg32 offset="0x00004" name="POSTDIV1_CFG"/>
+	<reg32 offset="0x00008" name="CHGPUMP_CFG"/>
+	<reg32 offset="0x0000C" name="VCOLPF_CFG"/>
+	<reg32 offset="0x00010" name="VREG_CFG"/>
+	<reg32 offset="0x00014" name="PWRGEN_CFG"/>
+	<reg32 offset="0x00018" name="DMUX_CFG"/>
+	<reg32 offset="0x0001C" name="AMUX_CFG"/>
+	<reg32 offset="0x00020" name="GLB_CFG">
+		<bitfield name="PLL_PWRDN_B" pos="0" type="boolean"/>
+		<bitfield name="PLL_LDO_PWRDN_B" pos="1" type="boolean"/>
+		<bitfield name="PLL_PWRGEN_PWRDN_B" pos="2" type="boolean"/>
+		<bitfield name="PLL_ENABLE" pos="3" type="boolean"/>
+	</reg32>
+	<reg32 offset="0x00024" name="POSTDIV2_CFG"/>
+	<reg32 offset="0x00028" name="POSTDIV3_CFG"/>
+	<reg32 offset="0x0002C" name="LPFR_CFG"/>
+	<reg32 offset="0x00030" name="LPFC1_CFG"/>
+	<reg32 offset="0x00034" name="LPFC2_CFG"/>
+	<reg32 offset="0x00038" name="SDM_CFG0"/>
+	<reg32 offset="0x0003C" name="SDM_CFG1"/>
+	<reg32 offset="0x00040" name="SDM_CFG2"/>
+	<reg32 offset="0x00044" name="SDM_CFG3"/>
+	<reg32 offset="0x00048" name="SDM_CFG4"/>
+	<reg32 offset="0x0004C" name="SSC_CFG0"/>
+	<reg32 offset="0x00050" name="SSC_CFG1"/>
+	<reg32 offset="0x00054" name="SSC_CFG2"/>
+	<reg32 offset="0x00058" name="SSC_CFG3"/>
+	<reg32 offset="0x0005C" name="LKDET_CFG0"/>
+	<reg32 offset="0x00060" name="LKDET_CFG1"/>
+	<reg32 offset="0x00064" name="LKDET_CFG2"/>
+	<reg32 offset="0x00068" name="TEST_CFG">
+		<bitfield name="PLL_SW_RESET" pos="0" type="boolean"/>
+	</reg32>
+	<reg32 offset="0x0006C" name="CAL_CFG0"/>
+	<reg32 offset="0x00070" name="CAL_CFG1"/>
+	<reg32 offset="0x00074" name="CAL_CFG2"/>
+	<reg32 offset="0x00078" name="CAL_CFG3"/>
+	<reg32 offset="0x0007C" name="CAL_CFG4"/>
+	<reg32 offset="0x00080" name="CAL_CFG5"/>
+	<reg32 offset="0x00084" name="CAL_CFG6"/>
+	<reg32 offset="0x00088" name="CAL_CFG7"/>
+	<reg32 offset="0x0008C" name="CAL_CFG8"/>
+	<reg32 offset="0x00090" name="CAL_CFG9"/>
+	<reg32 offset="0x00094" name="CAL_CFG10"/>
+	<reg32 offset="0x00098" name="CAL_CFG11"/>
+	<reg32 offset="0x0009C" name="EFUSE_CFG"/>
+	<reg32 offset="0x000A0" name="DEBUG_BUS_SEL"/>
+</domain>
+
 </database>
-- 
Qualcomm Innovation Center, Inc.

The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project

next prev parent reply	other threads:[~2015-05-01 21:43 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-01 21:40 [PATCH] drm/msm: Update generated headers (PLL registers) Stephane Viau
2015-05-01 21:43 ` Stephane Viau [this message]
2015-05-11 20:39   ` [PATCH] rnndb: Add 28nm PLL register description Hai Li
2015-05-11 20:36 ` [PATCH] drm/msm: Update generated headers (PLL registers) Hai Li

find likely ancestor, descendant, or conflicting patches for this message:
( dfblob:480ec46 dfblob:ce6085a dfblob:ea2a74b dfblob:00fc611
dfblob:9ac5e00 dfblob:d3336a9 )
 OR (
bs:"[PATCH] rnndb: Add 28nm PLL register description" )
	(help)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1430516583-6299-1-git-send-email-sviau@codeaurora.org \
    --to=sviau@codeaurora.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robdclark@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox