From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
To: lee.jones@linaro.org
Cc: broonie@kernel.org, lgirdwood@gmail.com, sameo@linux.intel.com,
patches@opensource.wolfsonmicro.com,
linux-kernel@vger.kernel.org
Subject: [RESEND PATCH v3 04/10] mfd: arizona: Fix formating/style issues in arizona_apply_hardware_patch
Date: Mon, 11 May 2015 13:58:04 +0100 [thread overview]
Message-ID: <1431349090-24173-5-git-send-email-ckeepax@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1431349090-24173-1-git-send-email-ckeepax@opensource.wolfsonmicro.com>
In preparation for some refactoring fixup some minor style, formating
and code clarity issues.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
drivers/mfd/arizona-core.c | 37 +++++++++++++++++--------------------
1 files changed, 17 insertions(+), 20 deletions(-)
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index 0df1299..326a4af 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -264,20 +264,20 @@ static void arizona_disable_reset(struct arizona *arizona)
}
}
-static int arizona_apply_hardware_patch(struct arizona* arizona)
+static int wm5102_apply_hardware_patch(struct arizona *arizona)
{
unsigned int fll, sysclk;
int ret, err;
/* Cache existing FLL and SYSCLK settings */
ret = regmap_read(arizona->regmap, ARIZONA_FLL1_CONTROL_1, &fll);
- if (ret != 0) {
+ if (ret) {
dev_err(arizona->dev, "Failed to cache FLL settings: %d\n",
ret);
return ret;
}
ret = regmap_read(arizona->regmap, ARIZONA_SYSTEM_CLOCK_1, &sysclk);
- if (ret != 0) {
+ if (ret) {
dev_err(arizona->dev, "Failed to cache SYSCLK settings: %d\n",
ret);
return ret;
@@ -286,7 +286,7 @@ static int arizona_apply_hardware_patch(struct arizona* arizona)
/* Start up SYSCLK using the FLL in free running mode */
ret = regmap_write(arizona->regmap, ARIZONA_FLL1_CONTROL_1,
ARIZONA_FLL1_ENA | ARIZONA_FLL1_FREERUN);
- if (ret != 0) {
+ if (ret) {
dev_err(arizona->dev,
"Failed to start FLL in freerunning mode: %d\n",
ret);
@@ -295,36 +295,36 @@ static int arizona_apply_hardware_patch(struct arizona* arizona)
ret = arizona_poll_reg(arizona, 25, ARIZONA_INTERRUPT_RAW_STATUS_5,
ARIZONA_FLL1_CLOCK_OK_STS,
ARIZONA_FLL1_CLOCK_OK_STS);
- if (ret != 0) {
+ if (ret) {
ret = -ETIMEDOUT;
goto err_fll;
}
ret = regmap_write(arizona->regmap, ARIZONA_SYSTEM_CLOCK_1, 0x0144);
- if (ret != 0) {
+ if (ret) {
dev_err(arizona->dev, "Failed to start SYSCLK: %d\n", ret);
goto err_fll;
}
/* Start the write sequencer and wait for it to finish */
ret = regmap_write(arizona->regmap, ARIZONA_WRITE_SEQUENCER_CTRL_0,
- ARIZONA_WSEQ_ENA | ARIZONA_WSEQ_START | 160);
- if (ret != 0) {
+ ARIZONA_WSEQ_ENA | ARIZONA_WSEQ_START | 160);
+ if (ret) {
dev_err(arizona->dev, "Failed to start write sequencer: %d\n",
ret);
goto err_sysclk;
}
ret = arizona_poll_reg(arizona, 5, ARIZONA_WRITE_SEQUENCER_CTRL_1,
ARIZONA_WSEQ_BUSY, 0);
- if (ret != 0) {
+ if (ret) {
regmap_write(arizona->regmap, ARIZONA_WRITE_SEQUENCER_CTRL_0,
- ARIZONA_WSEQ_ABORT);
+ ARIZONA_WSEQ_ABORT);
ret = -ETIMEDOUT;
}
err_sysclk:
err = regmap_write(arizona->regmap, ARIZONA_SYSTEM_CLOCK_1, sysclk);
- if (err != 0) {
+ if (err) {
dev_err(arizona->dev,
"Failed to re-apply old SYSCLK settings: %d\n",
err);
@@ -332,16 +332,13 @@ err_sysclk:
err_fll:
err = regmap_write(arizona->regmap, ARIZONA_FLL1_CONTROL_1, fll);
- if (err != 0) {
+ if (err) {
dev_err(arizona->dev,
"Failed to re-apply old FLL settings: %d\n",
err);
}
- if (ret != 0)
- return ret;
- else
- return err;
+ return ret ?: err;
}
static int wm5102_clear_write_sequencer(struct arizona *arizona)
@@ -407,8 +404,8 @@ static int arizona_runtime_resume(struct device *dev)
goto err;
}
- ret = arizona_apply_hardware_patch(arizona);
- if (ret != 0) {
+ ret = wm5102_apply_hardware_patch(arizona);
+ if (ret) {
dev_err(arizona->dev,
"Failed to apply hardware patch: %d\n",
ret);
@@ -924,8 +921,8 @@ int arizona_dev_init(struct arizona *arizona)
switch (arizona->type) {
case WM5102:
- ret = arizona_apply_hardware_patch(arizona);
- if (ret != 0) {
+ ret = wm5102_apply_hardware_patch(arizona);
+ if (ret) {
dev_err(arizona->dev,
"Failed to apply hardware patch: %d\n",
ret);
--
1.7.2.5
next prev parent reply other threads:[~2015-05-11 13:09 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-11 12:58 [RESEND PATCH v3 00/10] wm5110 Boot Fixups Charles Keepax
2015-05-11 12:58 ` [RESEND PATCH v3 01/10] mfd: arizona: Use devres to manage reset GPIO Charles Keepax
2015-05-13 12:20 ` Lee Jones
2015-05-11 12:58 ` [RESEND PATCH v3 02/10] mfd: arizona: Factor out hard reset into helper functions Charles Keepax
2015-05-13 12:20 ` Lee Jones
2015-05-11 12:58 ` [RESEND PATCH v3 03/10] mfd: wm5102: Ensure we always boot the device fully Charles Keepax
2015-05-13 12:20 ` Lee Jones
2015-05-11 12:58 ` Charles Keepax [this message]
2015-05-13 12:21 ` [RESEND PATCH v3 04/10] mfd: arizona: Fix formating/style issues in arizona_apply_hardware_patch Lee Jones
2015-05-11 12:58 ` [RESEND PATCH v3 05/10] mfd: arizona: Factor out SYSCLK enable from wm5102 hardware patch Charles Keepax
2015-05-13 12:21 ` Lee Jones
2015-05-11 12:58 ` [RESEND PATCH v3 06/10] mfd: wm5110: Add register patch required for low power sleep Charles Keepax
2015-05-13 12:21 ` Lee Jones
2015-05-11 12:58 ` [RESEND PATCH v3 07/10] regulator: arizona-ldo1: Add additional supported voltage Charles Keepax
2015-05-11 14:20 ` Mark Brown
2015-05-11 14:41 ` Charles Keepax
2015-05-11 16:04 ` Mark Brown
2015-05-11 12:58 ` [RESEND PATCH v3 08/10] mfd: wm5110: Set DCVDD voltage to 1.175V before entering sleep mode Charles Keepax
2015-05-13 12:21 ` Lee Jones
2015-05-11 12:58 ` [RESEND PATCH v3 09/10] mfd: arizona: Add better support for system suspend Charles Keepax
2015-05-13 12:21 ` Lee Jones
2015-05-11 12:58 ` [RESEND PATCH v3 10/10] mfd: wm5110: Add delay before releasing reset line Charles Keepax
2015-05-13 12:22 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1431349090-24173-5-git-send-email-ckeepax@opensource.wolfsonmicro.com \
--to=ckeepax@opensource.wolfsonmicro.com \
--cc=broonie@kernel.org \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.wolfsonmicro.com \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox