[PATCH 0/5] Add Cygnus PCIe PHY support

[Ray Jui <rjui@broadcom.com>]

This patch series adds support for the Cygnus PCIe PHY and support of MDC/MDIO
interface found in various iProc based of SoCs. The iProc MDC/MDIO interface
can be used by the host processor to communicate with various internal
Serdes/PHYs including Ethernet, PCIe, USB, etc.

This patch series is based on Linux v4.1-rc4 and is avaliable in:
https://github.com/Broadcom/cygnus-linux/tree/cygnus-pcie-phy-v1

Ray Jui (5):
  phy: iproc-mdio: Define DT binding
  phy: iproc-mdio: Initial iProc MDC/MDIO support
  phy: cygnus: pcie: Define DT binding
  phy: cygnus: pcie: Add Cygnus PCIe PHY support
  ARM: dts: enable PCIe PHY support for Cygnus

 .../bindings/phy/brcm,cygnus-pcie-phy.txt          |   31 ++
 .../devicetree/bindings/phy/brcm,iproc-mdio.txt    |   15 +
 arch/arm/boot/dts/bcm-cygnus.dtsi                  |   17 +
 drivers/phy/Kconfig                                |   27 ++
 drivers/phy/Makefile                               |    2 +
 drivers/phy/phy-cygnus-pcie.c                      |  340 ++++++++++++++++++++
 drivers/phy/phy-iproc-mdio.c                       |  249 ++++++++++++++
 include/linux/phy/iproc_mdio_phy.h                 |   22 ++
 8 files changed, 703 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt
 create mode 100644 Documentation/devicetree/bindings/phy/brcm,iproc-mdio.txt
 create mode 100644 drivers/phy/phy-cygnus-pcie.c
 create mode 100644 drivers/phy/phy-iproc-mdio.c
 create mode 100644 include/linux/phy/iproc_mdio_phy.h

-- 
1.7.9.5