linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
To: Chanwoo Choi <cw00.choi@samsung.com>,
	MyungJoo Ham <myungjoo.ham@samsung.com>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Samuel Ortiz <sameo@linux.intel.com>,
	Lee Jones <lee.jones@linaro.org>,
	Sebastian Reichel <sre@kernel.org>,
	Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>,
	David Woodhouse <dwmw2@infradead.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	linux-kernel@vger.kernel.org, linux-input@vger.kernel.org,
	linux-pm@vger.kernel.org
Cc: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Subject: [PATCH v2 5/9] extcon/input/mfd/regulator: max77843: Switch to common max77693 state container
Date: Sun, 24 May 2015 14:43:29 +0900	[thread overview]
Message-ID: <1432446213-4886-6-git-send-email-k.kozlowski.k@gmail.com> (raw)
In-Reply-To: <1432446213-4886-1-git-send-email-k.kozlowski.k@gmail.com>

Switch to the same definition of state container as in MAX77693 drivers.
This will allow usage of one regulator driver in both devices: MAX77693
and MAX77843.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
---
 drivers/extcon/extcon-max77843.c     | 17 +++++++++--------
 drivers/input/misc/max77843-haptic.c |  3 ++-
 drivers/mfd/max77843.c               | 20 +++++++++++---------
 drivers/regulator/max77843.c         |  6 ++++--
 include/linux/mfd/max77693-common.h  |  5 +++++
 include/linux/mfd/max77843-private.h | 20 --------------------
 6 files changed, 31 insertions(+), 40 deletions(-)

diff --git a/drivers/extcon/extcon-max77843.c b/drivers/extcon/extcon-max77843.c
index d78a64d7fc20..0f5910dcccb7 100644
--- a/drivers/extcon/extcon-max77843.c
+++ b/drivers/extcon/extcon-max77843.c
@@ -16,6 +16,7 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/mfd/max77843-private.h>
+#include <linux/mfd/max77693-common.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/workqueue.h>
@@ -32,7 +33,7 @@ enum max77843_muic_status {
 
 struct max77843_muic_info {
 	struct device *dev;
-	struct max77843 *max77843;
+	struct max77693_dev *max77843;
 	struct extcon_dev *edev;
 
 	struct mutex mutex;
@@ -198,7 +199,7 @@ static const struct regmap_irq_chip max77843_muic_irq_chip = {
 static int max77843_muic_set_path(struct max77843_muic_info *info,
 		u8 val, bool attached)
 {
-	struct max77843 *max77843 = info->max77843;
+	struct max77693_dev *max77843 = info->max77843;
 	int ret = 0;
 	unsigned int ctrl1, ctrl2;
 
@@ -539,7 +540,7 @@ static void max77843_muic_irq_work(struct work_struct *work)
 {
 	struct max77843_muic_info *info = container_of(work,
 			struct max77843_muic_info, irq_work);
-	struct max77843 *max77843 = info->max77843;
+	struct max77693_dev *max77843 = info->max77843;
 	int ret = 0;
 
 	mutex_lock(&info->mutex);
@@ -615,7 +616,7 @@ static void max77843_muic_detect_cable_wq(struct work_struct *work)
 {
 	struct max77843_muic_info *info = container_of(to_delayed_work(work),
 			struct max77843_muic_info, wq_detcable);
-	struct max77843 *max77843 = info->max77843;
+	struct max77693_dev *max77843 = info->max77843;
 	int chg_type, adc, ret;
 	bool attached;
 
@@ -656,7 +657,7 @@ err_cable_wq:
 static int max77843_muic_set_debounce_time(struct max77843_muic_info *info,
 		enum max77843_muic_adc_debounce_time time)
 {
-	struct max77843 *max77843 = info->max77843;
+	struct max77693_dev *max77843 = info->max77843;
 	int ret;
 
 	switch (time) {
@@ -681,7 +682,7 @@ static int max77843_muic_set_debounce_time(struct max77843_muic_info *info,
 	return 0;
 }
 
-static int max77843_init_muic_regmap(struct max77843 *max77843)
+static int max77843_init_muic_regmap(struct max77693_dev *max77843)
 {
 	int ret;
 
@@ -720,7 +721,7 @@ err_muic_i2c:
 
 static int max77843_muic_probe(struct platform_device *pdev)
 {
-	struct max77843 *max77843 = dev_get_drvdata(pdev->dev.parent);
+	struct max77693_dev *max77843 = dev_get_drvdata(pdev->dev.parent);
 	struct max77843_muic_info *info;
 	unsigned int id;
 	int i, ret;
@@ -821,7 +822,7 @@ err_muic_irq:
 static int max77843_muic_remove(struct platform_device *pdev)
 {
 	struct max77843_muic_info *info = platform_get_drvdata(pdev);
-	struct max77843 *max77843 = info->max77843;
+	struct max77693_dev *max77843 = info->max77843;
 
 	cancel_work_sync(&info->irq_work);
 	regmap_del_irq_chip(max77843->irq, max77843->irq_data_muic);
diff --git a/drivers/input/misc/max77843-haptic.c b/drivers/input/misc/max77843-haptic.c
index dccbb465a055..92583dcc808b 100644
--- a/drivers/input/misc/max77843-haptic.c
+++ b/drivers/input/misc/max77843-haptic.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/input.h>
 #include <linux/mfd/max77843-private.h>
+#include <linux/mfd/max77693-common.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/pwm.h>
@@ -243,7 +244,7 @@ static void max77843_haptic_close(struct input_dev *dev)
 
 static int max77843_haptic_probe(struct platform_device *pdev)
 {
-	struct max77843 *max77843 = dev_get_drvdata(pdev->dev.parent);
+	struct max77693_dev *max77843 = dev_get_drvdata(pdev->dev.parent);
 	struct max77843_haptic *haptic;
 	int error;
 
diff --git a/drivers/mfd/max77843.c b/drivers/mfd/max77843.c
index a354ac677ec7..d4ce1303edf7 100644
--- a/drivers/mfd/max77843.c
+++ b/drivers/mfd/max77843.c
@@ -18,6 +18,7 @@
 #include <linux/module.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/max77843-private.h>
+#include <linux/mfd/max77693-common.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
 
@@ -71,7 +72,7 @@ static const struct regmap_irq_chip max77843_irq_chip = {
 };
 
 /* Charger and Charger regulator use same regmap. */
-static int max77843_chg_init(struct max77843 *max77843)
+static int max77843_chg_init(struct max77693_dev *max77843)
 {
 	int ret;
 
@@ -101,7 +102,7 @@ err_chg_i2c:
 static int max77843_probe(struct i2c_client *i2c,
 			  const struct i2c_device_id *id)
 {
-	struct max77843 *max77843;
+	struct max77693_dev *max77843;
 	unsigned int reg_data;
 	int ret;
 
@@ -113,6 +114,7 @@ static int max77843_probe(struct i2c_client *i2c,
 	max77843->dev = &i2c->dev;
 	max77843->i2c = i2c;
 	max77843->irq = i2c->irq;
+	max77843->type = id->driver_data;
 
 	max77843->regmap = devm_regmap_init_i2c(i2c,
 			&max77843_regmap_config);
@@ -123,7 +125,7 @@ static int max77843_probe(struct i2c_client *i2c,
 
 	ret = regmap_add_irq_chip(max77843->regmap, max77843->irq,
 			IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_SHARED,
-			0, &max77843_irq_chip, &max77843->irq_data);
+			0, &max77843_irq_chip, &max77843->irq_data_topsys);
 	if (ret) {
 		dev_err(&i2c->dev, "Failed to add TOPSYS IRQ chip\n");
 		return ret;
@@ -164,18 +166,18 @@ static int max77843_probe(struct i2c_client *i2c,
 	return 0;
 
 err_pmic_id:
-	regmap_del_irq_chip(max77843->irq, max77843->irq_data);
+	regmap_del_irq_chip(max77843->irq, max77843->irq_data_topsys);
 
 	return ret;
 }
 
 static int max77843_remove(struct i2c_client *i2c)
 {
-	struct max77843 *max77843 = i2c_get_clientdata(i2c);
+	struct max77693_dev *max77843 = i2c_get_clientdata(i2c);
 
 	mfd_remove_devices(max77843->dev);
 
-	regmap_del_irq_chip(max77843->irq, max77843->irq_data);
+	regmap_del_irq_chip(max77843->irq, max77843->irq_data_topsys);
 
 	i2c_unregister_device(max77843->i2c_chg);
 
@@ -188,7 +190,7 @@ static const struct of_device_id max77843_dt_match[] = {
 };
 
 static const struct i2c_device_id max77843_id[] = {
-	{ "max77843", },
+	{ "max77843", TYPE_MAX77843, },
 	{ },
 };
 MODULE_DEVICE_TABLE(i2c, max77843_id);
@@ -196,7 +198,7 @@ MODULE_DEVICE_TABLE(i2c, max77843_id);
 static int __maybe_unused max77843_suspend(struct device *dev)
 {
 	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
-	struct max77843 *max77843 = i2c_get_clientdata(i2c);
+	struct max77693_dev *max77843 = i2c_get_clientdata(i2c);
 
 	disable_irq(max77843->irq);
 	if (device_may_wakeup(dev))
@@ -208,7 +210,7 @@ static int __maybe_unused max77843_suspend(struct device *dev)
 static int __maybe_unused max77843_resume(struct device *dev)
 {
 	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
-	struct max77843 *max77843 = i2c_get_clientdata(i2c);
+	struct max77693_dev *max77843 = i2c_get_clientdata(i2c);
 
 	if (device_may_wakeup(dev))
 		disable_irq_wake(max77843->irq);
diff --git a/drivers/regulator/max77843.c b/drivers/regulator/max77843.c
index f4fd0d3cfa6e..93507c3aff23 100644
--- a/drivers/regulator/max77843.c
+++ b/drivers/regulator/max77843.c
@@ -16,6 +16,7 @@
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
 #include <linux/mfd/max77843-private.h>
+#include <linux/mfd/max77693-common.h>
 #include <linux/regulator/of_regulator.h>
 
 enum max77843_regulator_type {
@@ -130,7 +131,8 @@ static const struct regulator_desc max77843_supported_regulators[] = {
 	},
 };
 
-static struct regmap *max77843_get_regmap(struct max77843 *max77843, int reg_id)
+static struct regmap *max77843_get_regmap(struct max77693_dev *max77843,
+					  int reg_id)
 {
 	switch (reg_id) {
 	case MAX77843_SAFEOUT1:
@@ -145,7 +147,7 @@ static struct regmap *max77843_get_regmap(struct max77843 *max77843, int reg_id)
 
 static int max77843_regulator_probe(struct platform_device *pdev)
 {
-	struct max77843 *max77843 = dev_get_drvdata(pdev->dev.parent);
+	struct max77693_dev *max77843 = dev_get_drvdata(pdev->dev.parent);
 	struct regulator_config config = {};
 	int i;
 
diff --git a/include/linux/mfd/max77693-common.h b/include/linux/mfd/max77693-common.h
index 7da4cc38e982..095b121aa725 100644
--- a/include/linux/mfd/max77693-common.h
+++ b/include/linux/mfd/max77693-common.h
@@ -15,6 +15,9 @@
 enum max77693_types {
 	TYPE_MAX77693_UNKNOWN,
 	TYPE_MAX77693,
+	TYPE_MAX77843,
+
+	TYPE_MAX77693_NUM,
 };
 
 /*
@@ -25,12 +28,14 @@ struct max77693_dev {
 	struct i2c_client *i2c;		/* 0xCC , PMIC, Charger, Flash LED */
 	struct i2c_client *i2c_muic;	/* 0x4A , MUIC */
 	struct i2c_client *i2c_haptic;	/* MAX77693: 0x90 , Haptic */
+	struct i2c_client *i2c_chg;	/* MAX77843: 0xD2, Charger */
 
 	enum max77693_types type;
 
 	struct regmap *regmap;
 	struct regmap *regmap_muic;
 	struct regmap *regmap_haptic;	/* Only MAX77693 */
+	struct regmap *regmap_chg;	/* Only MAX77843 */
 
 	struct regmap_irq_chip_data *irq_data_led;
 	struct regmap_irq_chip_data *irq_data_topsys;
diff --git a/include/linux/mfd/max77843-private.h b/include/linux/mfd/max77843-private.h
index 7178ace8379e..0121d9440340 100644
--- a/include/linux/mfd/max77843-private.h
+++ b/include/linux/mfd/max77843-private.h
@@ -431,24 +431,4 @@ enum max77843_irq_muic {
 #define MAX77843_REG_SAFEOUTCTRL_SAFEOUT2_MASK \
 		(0x3 << SAFEOUTCTRL_SAFEOUT2_SHIFT)
 
-struct max77843 {
-	struct device *dev;
-
-	struct i2c_client *i2c;
-	struct i2c_client *i2c_chg;
-	struct i2c_client *i2c_fuel;
-	struct i2c_client *i2c_muic;
-
-	struct regmap *regmap;
-	struct regmap *regmap_chg;
-	struct regmap *regmap_fuel;
-	struct regmap *regmap_muic;
-
-	struct regmap_irq_chip_data *irq_data;
-	struct regmap_irq_chip_data *irq_data_chg;
-	struct regmap_irq_chip_data *irq_data_fuel;
-	struct regmap_irq_chip_data *irq_data_muic;
-
-	int irq;
-};
 #endif /* __MAX77843_H__ */
-- 
2.1.4


  parent reply	other threads:[~2015-05-24  5:46 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-24  5:43 [PATCH v2 0/9] regulator/power/mfd/input/extcon: Merge max77843 into max77693 Krzysztof Kozlowski
2015-05-24  5:43 ` [PATCH v2 1/9] mfd/extcon: max77693: Remove unused extern declarations and max77693_dev members Krzysztof Kozlowski
2015-05-24  5:43 ` [PATCH v2 2/9] mfd: max77693: Store I2C device type as enum and add default unknown Krzysztof Kozlowski
2015-05-27 10:23   ` Lee Jones
2015-05-27 11:13     ` Krzysztof Kozłowski
2015-05-27 12:15       ` Lee Jones
2015-05-27 12:24         ` Lee Jones
2015-05-24  5:43 ` [PATCH v2 3/9] regulator: max77693: Support different register configurations Krzysztof Kozlowski
2015-05-24  5:43 ` [PATCH v2 4/9] extcon/input/mfd/power/regulator: max77693: Move state container to common header Krzysztof Kozlowski
2015-05-26 17:46   ` Dmitry Torokhov
2015-05-27 10:25   ` Lee Jones
2015-05-27 13:55   ` Chanwoo Choi
2015-05-24  5:43 ` Krzysztof Kozlowski [this message]
2015-05-26 17:46   ` [PATCH v2 5/9] extcon/input/mfd/regulator: max77843: Switch to common max77693 state container Dmitry Torokhov
2015-05-27 10:25   ` Lee Jones
2015-05-27 13:54   ` Chanwoo Choi
2015-05-24  5:43 ` [PATCH v2 6/9] mfd/extcon: max77693: Rename defines to allow inclusion with max77843 Krzysztof Kozlowski
2015-05-27 10:26   ` Lee Jones
2015-05-27 13:52   ` Chanwoo Choi
2015-05-24  5:43 ` [PATCH v2 7/9] mfd/extcon: max77843: Rename defines to allow inclusion with max77693 Krzysztof Kozlowski
2015-05-27 13:50   ` Chanwoo Choi
2015-05-27 23:42     ` Krzysztof Kozłowski
2015-05-29 11:06       ` Chanwoo Choi
2015-05-24  5:43 ` [PATCH v2 8/9] regulator: max77693: Add support for MAX77843 device Krzysztof Kozlowski
2015-05-24  5:43 ` [PATCH v2 9/9] regulator: Remove the max77843 driver Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1432446213-4886-6-git-send-email-k.kozlowski.k@gmail.com \
    --to=k.kozlowski.k@gmail.com \
    --cc=broonie@kernel.org \
    --cc=cw00.choi@samsung.com \
    --cc=dbaryshkov@gmail.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=dwmw2@infradead.org \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=myungjoo.ham@samsung.com \
    --cc=sameo@linux.intel.com \
    --cc=sre@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).