From: Xunlei Pang <xlpang@126.com>
To: linux-kernel@vger.kernel.org
Cc: rtc-linux@googlegroups.com,
Alessandro Zummo <a.zummo@towertech.it>,
John Stultz <john.stultz@linaro.org>,
Arnd Bergmann <arnd@arndb.de>,
"David S. Miller" <davem@davemloft.net>,
sparclinux@vger.kernel.org, linux-cris-kernel@axis.com,
Mikael Starvik <starvik@axis.com>,
Jesper Nilsson <jesper.nilsson@axis.com>,
Xunlei Pang <pang.xunlei@linaro.org>
Subject: [PATCH v2 3/4] drivers/rtc/interface.c: Remove rtc_set_mmss()
Date: Fri, 29 May 2015 22:46:17 +0800 [thread overview]
Message-ID: <1432910778-314-3-git-send-email-xlpang@126.com> (raw)
In-Reply-To: <1432910778-314-1-git-send-email-xlpang@126.com>
From: Xunlei Pang <pang.xunlei@linaro.org>
Now rtc_set_mmss() has no users, just remove it.
We still have rtc_set_time() doing similar things.
Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org>
---
drivers/rtc/interface.c | 45 ---------------------------------------------
include/linux/rtc.h | 1 -
2 files changed, 46 deletions(-)
diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
index 166fc60..b511aa1 100644
--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -91,51 +91,6 @@ int rtc_set_time(struct rtc_device *rtc, struct rtc_time *tm)
}
EXPORT_SYMBOL_GPL(rtc_set_time);
-int rtc_set_mmss(struct rtc_device *rtc, unsigned long secs)
-{
- int err;
-
- err = mutex_lock_interruptible(&rtc->ops_lock);
- if (err)
- return err;
-
- if (!rtc->ops)
- err = -ENODEV;
- else if (rtc->ops->set_mmss64)
- err = rtc->ops->set_mmss64(rtc->dev.parent, secs);
- else if (rtc->ops->set_mmss)
- err = rtc->ops->set_mmss(rtc->dev.parent, secs);
- else if (rtc->ops->read_time && rtc->ops->set_time) {
- struct rtc_time new, old;
-
- err = rtc->ops->read_time(rtc->dev.parent, &old);
- if (err == 0) {
- rtc_time64_to_tm(secs, &new);
-
- /*
- * avoid writing when we're going to change the day of
- * the month. We will retry in the next minute. This
- * basically means that if the RTC must not drift
- * by more than 1 minute in 11 minutes.
- */
- if (!((old.tm_hour == 23 && old.tm_min == 59) ||
- (new.tm_hour == 23 && new.tm_min == 59)))
- err = rtc->ops->set_time(rtc->dev.parent,
- &new);
- }
- } else {
- err = -EINVAL;
- }
-
- pm_stay_awake(rtc->dev.parent);
- mutex_unlock(&rtc->ops_lock);
- /* A timer might have just expired */
- schedule_work(&rtc->irqwork);
-
- return err;
-}
-EXPORT_SYMBOL_GPL(rtc_set_mmss);
-
static int rtc_read_alarm_internal(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
{
int err;
diff --git a/include/linux/rtc.h b/include/linux/rtc.h
index 8dcf682..e8f2c3c 100644
--- a/include/linux/rtc.h
+++ b/include/linux/rtc.h
@@ -161,7 +161,6 @@ extern void devm_rtc_device_unregister(struct device *dev,
extern int rtc_read_time(struct rtc_device *rtc, struct rtc_time *tm);
extern int rtc_set_time(struct rtc_device *rtc, struct rtc_time *tm);
-extern int rtc_set_mmss(struct rtc_device *rtc, unsigned long secs);
extern int rtc_set_ntp_time(struct timespec64 now);
int __rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm);
extern int rtc_read_alarm(struct rtc_device *rtc,
--
1.9.1
next prev parent reply other threads:[~2015-05-29 14:48 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-29 14:46 [PATCH v2 1/4] NTP: rtc: Add CONFIG_RTC_SYSTOHC_DEVICE for NTP synchronization Xunlei Pang
2015-05-29 14:46 ` [PATCH v2 2/4] sparc: time: Replace update_persistent_clock() with CONFIG_RTC_SYSTOHC Xunlei Pang
2015-05-29 14:46 ` Xunlei Pang [this message]
2015-05-29 14:46 ` [PATCH v2 4/4] cris: time: Cleanup of persistent clock stuff Xunlei Pang
2015-06-01 8:27 ` [PATCH v2 1/4] NTP: rtc: Add CONFIG_RTC_SYSTOHC_DEVICE for NTP synchronization Paul Bolle
2015-06-02 3:18 ` pang.xunlei
-- strict thread matches above, loose matches on Subject: below --
2015-06-02 9:14 Xunlei Pang
2015-06-02 9:14 ` [PATCH v2 3/4] drivers/rtc/interface.c: Remove rtc_set_mmss() Xunlei Pang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1432910778-314-3-git-send-email-xlpang@126.com \
--to=xlpang@126.com \
--cc=a.zummo@towertech.it \
--cc=arnd@arndb.de \
--cc=davem@davemloft.net \
--cc=jesper.nilsson@axis.com \
--cc=john.stultz@linaro.org \
--cc=linux-cris-kernel@axis.com \
--cc=linux-kernel@vger.kernel.org \
--cc=pang.xunlei@linaro.org \
--cc=rtc-linux@googlegroups.com \
--cc=sparclinux@vger.kernel.org \
--cc=starvik@axis.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox