From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
	id S1756873AbbE2QlO (ORCPT <rfc822;w@1wt.eu>);
	Fri, 29 May 2015 12:41:14 -0400
Received: from mail-ob0-f178.google.com ([209.85.214.178]:33125 "EHLO
	mail-ob0-f178.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
	with ESMTP id S1751854AbbE2Qiz (ORCPT
	<rfc822;linux-kernel@vger.kernel.org>);
	Fri, 29 May 2015 12:38:55 -0400
From: Rob Herring <robh@kernel.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Peter Chen <peter.chen@freescale.com>,
        Kishon Vijay Abraham I <kishon@ti.com>
Cc: linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>,
        Rob Herring <robh@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
        Mark Rutland <mark.rutland@arm.com>,
        Ian Campbell <ijc+devicetree@hellion.org.uk>,
        Kumar Gala <galak@codeaurora.org>
Subject: [PATCH v3 1/6] dt-bindings: Add Marvell PXA1928 USB and HSIC PHY bindings
Date: Fri, 29 May 2015 11:38:41 -0500
Message-Id: <1432917526-9688-2-git-send-email-robh@kernel.org>
X-Mailer: git-send-email 2.1.0
In-Reply-To: <1432917526-9688-1-git-send-email-robh@kernel.org>
References: <1432917526-9688-1-git-send-email-robh@kernel.org>
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

Add PHY binding for Marvell PXA1928 SOC's USB and HSIC PHYs.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: devicetree@vger.kernel.org
---
 .../devicetree/bindings/phy/pxa1928-usb-phy.txt        | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt

diff --git a/Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt b/Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt
new file mode 100644
index 0000000..660a13c
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt
@@ -0,0 +1,18 @@
+* Marvell PXA1928 USB and HSIC PHYs
+
+Required properties:
+- compatible: "marvell,pxa1928-usb-phy" or "marvell,pxa1928-hsic-phy"
+- reg: base address and length of the registers
+- clocks - A single clock. From common clock binding.
+- #phys-cells: should be 0. From commmon phy binding.
+- resets: reference to the reset controller
+
+Example:
+
+	usbphy: phy@7000 {
+		compatible = "marvell,pxa1928-usb-phy";
+		reg = <0x7000 0xe0>;
+		clocks = <&apmu_clocks PXA1928_CLK_USB>;
+		#phy-cells = <0>;
+	};
+
-- 
2.1.0