public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Axel Lin <axel.lin@ingics.com>
To: Mark Brown <broonie@kernel.org>
Cc: Krystian Garbaciak <krystian.garbaciak@diasemi.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Support Opensource <support.opensource@diasemi.com>,
	linux-kernel@vger.kernel.org
Subject: [PATCH] regulator: da9063: Fix up irq leak
Date: Sun, 31 May 2015 12:27:38 +0800	[thread overview]
Message-ID: <1433046458.23967.3.camel@ingics.com> (raw)

Current code does not set regulators->irq_ldo_lim and regulators->irq_uvov,
so it actually calls free_irq(0, regulators) twice in remove() but does not
free the irq actually used.

Convert to use devm_request_threaded_irq instead and then we don't need to
take care the clean up irq so remove irq_ldo_lim and irq_uvov from
struct da9063_regulators. Note, regulators->irq_uvov is not used at all in
current code.

There is a slightly change in this patch, it will return error in probe()
if devm_request_threaded_irq fails. If the irq is optional, it should be
fine to allow platform_get_irq_byname fails. But current code does not
allow platform_get_irq_byname fails. So I think the reason to allow
request irq failure is just because the irq leak.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
 drivers/regulator/da9063-regulator.c | 21 +++------------------
 1 file changed, 3 insertions(+), 18 deletions(-)

diff --git a/drivers/regulator/da9063-regulator.c b/drivers/regulator/da9063-regulator.c
index 31c2c59..aed1ad3 100644
--- a/drivers/regulator/da9063-regulator.c
+++ b/drivers/regulator/da9063-regulator.c
@@ -117,9 +117,6 @@ struct da9063_regulator {
 
 /* Encapsulates all information for the regulators driver */
 struct da9063_regulators {
-	int					irq_ldo_lim;
-	int					irq_uvov;
-
 	unsigned				n_regulators;
 	/* Array size to be defined during init. Keep at end. */
 	struct da9063_regulator			regulator[0];
@@ -867,35 +864,23 @@ static int da9063_regulator_probe(struct platform_device *pdev)
 		return irq;
 	}
 
-	ret = request_threaded_irq(irq,
+	ret = devm_request_threaded_irq(&pdev->dev, irq,
 				NULL, da9063_ldo_lim_event,
 				IRQF_TRIGGER_LOW | IRQF_ONESHOT,
 				"LDO_LIM", regulators);
 	if (ret) {
-		dev_err(&pdev->dev,
-				"Failed to request LDO_LIM IRQ.\n");
-		regulators->irq_ldo_lim = -ENXIO;
+		dev_err(&pdev->dev, "Failed to request LDO_LIM IRQ.\n");
+		return ret;
 	}
 
 	return 0;
 }
 
-static int da9063_regulator_remove(struct platform_device *pdev)
-{
-	struct da9063_regulators *regulators = platform_get_drvdata(pdev);
-
-	free_irq(regulators->irq_ldo_lim, regulators);
-	free_irq(regulators->irq_uvov, regulators);
-
-	return 0;
-}
-
 static struct platform_driver da9063_regulator_driver = {
 	.driver = {
 		.name = DA9063_DRVNAME_REGULATORS,
 	},
 	.probe = da9063_regulator_probe,
-	.remove = da9063_regulator_remove,
 };
 
 static int __init da9063_regulator_init(void)
-- 
2.1.0




             reply	other threads:[~2015-05-31  4:27 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-31  4:27 Axel Lin [this message]
2015-06-02 14:36 ` [PATCH] regulator: da9063: Fix up irq leak Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1433046458.23967.3.camel@ingics.com \
    --to=axel.lin@ingics.com \
    --cc=broonie@kernel.org \
    --cc=krystian.garbaciak@diasemi.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=support.opensource@diasemi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox