public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Alexander Kuleshov <kuleshovmail@gmail.com>
To: Thomas Gleixner <tglx@linutronix.de>,
	Ingo Molnar <mingo@redhat.com>, "H. Peter Anvin" <hpa@zytor.com>
Cc: Alexander Kuleshov <kuleshovmail@gmail.com>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	LKML <linux-kernel@vger.kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Borislav Petkov <bp@suse.de>,
	Mark Rustad <mark.d.rustad@intel.com>,
	Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH v9 3/3] x86/earlyprintk: setup earlyprintk as early as possible
Date: Wed,  3 Jun 2015 13:55:41 +0600	[thread overview]
Message-ID: <1433318141-8553-1-git-send-email-kuleshovmail@gmail.com> (raw)
In-Reply-To: <1433318072-5611-1-git-send-email-kuleshovmail@gmail.com>

The early_printk function is usable only after the setup_early_printk will
be executed. We pass 'earlyprintk' through the kernel command line, so it
will be usable only after the 'parse_early_param' will be executed. This means
that we have usable earlyprintk only during early boot, kernel decompression
and after call of the 'parse_early_param'. This patchset makes earlyprintk
usable before the call of the 'parse_early_param'.

This patch makes the setup_early_printk visible for head{32,64}.c. So the
'early_printk' function will be usabable after decompression of the
kernel and before parse_early_param will be called. It also must be
safe if CONFIG_CMDLINE_BOOL and CONFIG_CMDLINE_OVERRIDE are set, because
setup_cmdline function will be called before setup_early_printk.

It provides earlyprintk only for serial console, because other needs in
ioremap which is not initialized yet.

Tested it with qemu, so early_printk() is usable and prints to serial
console right after setup_early_printk function called.

Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
---
 arch/x86/include/asm/setup.h   |  7 +++++++
 arch/x86/kernel/early_printk.c | 30 ++++++++++++++++++++++++++++--
 arch/x86/kernel/head32.c       |  7 +++++++
 arch/x86/kernel/head64.c       |  6 ++++++
 4 files changed, 48 insertions(+), 2 deletions(-)

diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index 59efd0d..201eda0 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -120,6 +120,13 @@ asmlinkage void __init x86_64_start_reservations(char *real_mode_data);
 
 #endif /* __i386__ */
 void __init setup_builtin_cmdline(void);
+
+#ifdef CONFIG_EARLY_PRINTK
+/* used by arch/x86/kernel/head{32,64}.c */
+extern int __init setup_early_serial_console(void);
+#else
+static inline int __init setup_early_serial_console(void) { return 0; }
+#endif /* CONFIG_EARLY_PRINTK */
 #endif /* _SETUP */
 #else
 #define RESERVE_BRK(name,sz)				\
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index 89427d8..5373298 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -342,14 +342,16 @@ static int __init setup_early_printk(char *buf)
 	keep = (strstr(buf, "keep") != NULL);
 
 	while (*buf != '\0') {
-		if (!strncmp(buf, "serial", 6)) {
+		if (!strncmp(buf, "serial", 6) &&
+		    early_serial_console.index == -1) {
 			buf += 6;
 			early_serial_init(buf);
 			early_console_register(&early_serial_console, keep);
 			if (!strncmp(buf, ",ttyS", 5))
 				buf += 5;
 		}
-		if (!strncmp(buf, "ttyS", 4)) {
+		if (!strncmp(buf, "ttyS", 4) &&
+		    early_serial_console.index == -1) {
 			early_serial_init(buf + 4);
 			early_console_register(&early_serial_console, keep);
 		}
@@ -385,4 +387,28 @@ static int __init setup_early_printk(char *buf)
 	return 0;
 }
 
+int __init setup_early_serial_console(void)
+{
+	char *arg;
+
+	/*
+	 * make sure that we have:
+	 *      "serial,0x3f8,115200"
+	 *      "serial,ttyS0,115200"
+	 *      "ttyS0,115200"
+	 */
+	arg = strstr(boot_command_line, "earlyprintk=serial");
+	if (!arg)
+		arg = strstr(boot_command_line, "earlyprintk=ttyS");
+	if (!arg)
+		return -1;
+
+	arg = strstr(boot_command_line, "earlyprintk=");
+
+	/* += strlen("earlyprintk="); */
+	arg += 12;
+
+	return setup_early_printk(arg);
+}
+
 early_param("earlyprintk", setup_early_printk);
diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c
index 92e8b5f..6969d97 100644
--- a/arch/x86/kernel/head32.c
+++ b/arch/x86/kernel/head32.c
@@ -32,6 +32,13 @@ static void __init i386_default_early_setup(void)
 asmlinkage __visible void __init i386_start_kernel(void)
 {
 	setup_builtin_cmdline();
+
+	lockdep_init();
+
+	setup_early_serial_console();
+
+	early_printk("Early printk is initialized\n");
+
 	cr4_init_shadow();
 	sanitize_boot_params(&boot_params);
 
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index 346a042..35dd00f 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -174,6 +174,12 @@ asmlinkage __visible void __init x86_64_start_kernel(char * real_mode_data)
 
 	setup_builtin_cmdline();
 
+	lockdep_init();
+
+	setup_early_serial_console();
+
+	early_printk("Early printk is initialized\n");
+
 	/*
 	 * Load microcode early on BSP.
 	 */
--
2.4.0.GIT


      parent reply	other threads:[~2015-06-03  7:55 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-03  7:54 [PATCH v9 0/3] x86/earlyprintk: setup serial earlyprintk as early as possible Alexander Kuleshov
2015-06-03  7:55 ` [PATCH v9 1/3] x86/setup: introduce setup_bultin_cmdline Alexander Kuleshov
2015-06-03  9:30   ` Andy Shevchenko
2015-06-05  7:51     ` Alexander Kuleshov
2015-06-05 10:47       ` Andy Shevchenko
2015-06-05  7:58     ` Alexander Kuleshov
2015-06-03  7:55 ` [PATCH v9 2/3] x86/setup: handle builtin command line as early as possible Alexander Kuleshov
2015-06-03  7:55 ` Alexander Kuleshov [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1433318141-8553-1-git-send-email-kuleshovmail@gmail.com \
    --to=kuleshovmail@gmail.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=bp@suse.de \
    --cc=gregkh@linuxfoundation.org \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.d.rustad@intel.com \
    --cc=mingo@redhat.com \
    --cc=tglx@linutronix.de \
    --cc=yinghai@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox