From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
To: lee.jones@linaro.org
Cc: sameo@linux.intel.com, patches@opensource.wolfsonmicro.com,
linux-kernel@vger.kernel.org
Subject: [PATCH 1/2] mfd: wm5110: Add registers for custom write sequence triggers
Date: Fri, 5 Jun 2015 16:01:11 +0100 [thread overview]
Message-ID: <1433516472-17185-1-git-send-email-ckeepax@opensource.wolfsonmicro.com> (raw)
This register will be needed as part of some additional support for the
headphone path on wm5110, so this patch adds the register and sets up
its regmap config.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---
Hi,
Note these patches are based on the patch "Fixup register
table definitions", I sent upstream on May the 29th, so you
probably want to apply that first for this to apply cleanly.
Thanks,
Charles
drivers/mfd/wm5110-tables.c | 2 +
include/linux/mfd/arizona/registers.h | 37 +++++++++++++++++++++++++++++++++
2 files changed, 39 insertions(+), 0 deletions(-)
diff --git a/drivers/mfd/wm5110-tables.c b/drivers/mfd/wm5110-tables.c
index 4cccfb3..f9878bf 100644
--- a/drivers/mfd/wm5110-tables.c
+++ b/drivers/mfd/wm5110-tables.c
@@ -676,6 +676,7 @@ static const struct reg_default wm5110_reg_default[] = {
{ 0x00000032, 0x0100 }, /* R50 - PWM Drive 3 */
{ 0x00000040, 0x0000 }, /* R64 - Wake control */
{ 0x00000041, 0x0000 }, /* R65 - Sequence control */
+ { 0x00000042, 0x0000 }, /* R66 - Spare Triggers */
{ 0x00000061, 0x01FF }, /* R97 - Sample Rate Sequence Select 1 */
{ 0x00000062, 0x01FF }, /* R98 - Sample Rate Sequence Select 2 */
{ 0x00000063, 0x01FF }, /* R99 - Sample Rate Sequence Select 3 */
@@ -1706,6 +1707,7 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_PWM_DRIVE_3:
case ARIZONA_WAKE_CONTROL:
case ARIZONA_SEQUENCE_CONTROL:
+ case ARIZONA_SPARE_TRIGGERS:
case ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_1:
case ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_2:
case ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_3:
diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h
index 3499d36..11affb3 100644
--- a/include/linux/mfd/arizona/registers.h
+++ b/include/linux/mfd/arizona/registers.h
@@ -39,6 +39,7 @@
#define ARIZONA_PWM_DRIVE_3 0x32
#define ARIZONA_WAKE_CONTROL 0x40
#define ARIZONA_SEQUENCE_CONTROL 0x41
+#define ARIZONA_SPARE_TRIGGERS 0x42
#define ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_1 0x61
#define ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_2 0x62
#define ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_3 0x63
@@ -1431,6 +1432,42 @@
#define ARIZONA_WSEQ_ENA_JD2_RISE_WIDTH 1 /* WSEQ_ENA_JD2_RISE */
/*
+ * R66 (0x42) - Spare Triggers
+ */
+#define ARIZONA_WS_TRG8 0x0080 /* WS_TRG8 */
+#define ARIZONA_WS_TRG8_MASK 0x0080 /* WS_TRG8 */
+#define ARIZONA_WS_TRG8_SHIFT 7 /* WS_TRG8 */
+#define ARIZONA_WS_TRG8_WIDTH 1 /* WS_TRG8 */
+#define ARIZONA_WS_TRG7 0x0040 /* WS_TRG7 */
+#define ARIZONA_WS_TRG7_MASK 0x0040 /* WS_TRG7 */
+#define ARIZONA_WS_TRG7_SHIFT 6 /* WS_TRG7 */
+#define ARIZONA_WS_TRG7_WIDTH 1 /* WS_TRG7 */
+#define ARIZONA_WS_TRG6 0x0020 /* WS_TRG6 */
+#define ARIZONA_WS_TRG6_MASK 0x0020 /* WS_TRG6 */
+#define ARIZONA_WS_TRG6_SHIFT 5 /* WS_TRG6 */
+#define ARIZONA_WS_TRG6_WIDTH 1 /* WS_TRG6 */
+#define ARIZONA_WS_TRG5 0x0010 /* WS_TRG5 */
+#define ARIZONA_WS_TRG5_MASK 0x0010 /* WS_TRG5 */
+#define ARIZONA_WS_TRG5_SHIFT 4 /* WS_TRG5 */
+#define ARIZONA_WS_TRG5_WIDTH 1 /* WS_TRG5 */
+#define ARIZONA_WS_TRG4 0x0008 /* WS_TRG4 */
+#define ARIZONA_WS_TRG4_MASK 0x0008 /* WS_TRG4 */
+#define ARIZONA_WS_TRG4_SHIFT 3 /* WS_TRG4 */
+#define ARIZONA_WS_TRG4_WIDTH 1 /* WS_TRG4 */
+#define ARIZONA_WS_TRG3 0x0004 /* WS_TRG3 */
+#define ARIZONA_WS_TRG3_MASK 0x0004 /* WS_TRG3 */
+#define ARIZONA_WS_TRG3_SHIFT 2 /* WS_TRG3 */
+#define ARIZONA_WS_TRG3_WIDTH 1 /* WS_TRG3 */
+#define ARIZONA_WS_TRG2 0x0002 /* WS_TRG2 */
+#define ARIZONA_WS_TRG2_MASK 0x0002 /* WS_TRG2 */
+#define ARIZONA_WS_TRG2_SHIFT 1 /* WS_TRG2 */
+#define ARIZONA_WS_TRG2_WIDTH 1 /* WS_TRG2 */
+#define ARIZONA_WS_TRG1 0x0001 /* WS_TRG1 */
+#define ARIZONA_WS_TRG1_MASK 0x0001 /* WS_TRG1 */
+#define ARIZONA_WS_TRG1_SHIFT 0 /* WS_TRG1 */
+#define ARIZONA_WS_TRG1_WIDTH 1 /* WS_TRG1 */
+
+/*
* R97 (0x61) - Sample Rate Sequence Select 1
*/
#define ARIZONA_WSEQ_SAMPLE_RATE_DETECT_A_SEQ_ADDR_MASK 0x01FF /* WSEQ_SAMPLE_RATE_DETECT_A_SEQ_ADDR - [8:0] */
--
1.7.2.5
next reply other threads:[~2015-06-05 15:13 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-05 15:01 Charles Keepax [this message]
2015-06-05 15:01 ` [PATCH 2/2] mfd: wm5110: Add register patch for rev E and above Charles Keepax
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1433516472-17185-1-git-send-email-ckeepax@opensource.wolfsonmicro.com \
--to=ckeepax@opensource.wolfsonmicro.com \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.wolfsonmicro.com \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox