[PATCH 1/2] mfd: wm5110: Add registers for custom write sequence triggers

[PATCH 1/2] mfd: wm5110: Add registers for custom write sequence triggers

[Charles Keepax]

This register will be needed as part of some additional support for the
headphone path on wm5110, so this patch adds the register and sets up
its regmap config.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---

Hi,

Note these patches are based on the patch "Fixup register
table definitions", I sent upstream on May the 29th, so you
probably want to apply that first for this to apply cleanly.

Thanks,
Charles

 drivers/mfd/wm5110-tables.c           |    2 +
 include/linux/mfd/arizona/registers.h |   37 +++++++++++++++++++++++++++++++++
 2 files changed, 39 insertions(+), 0 deletions(-)

diff --git a/drivers/mfd/wm5110-tables.c b/drivers/mfd/wm5110-tables.c
index 4cccfb3..f9878bf 100644
--- a/drivers/mfd/wm5110-tables.c
+++ b/drivers/mfd/wm5110-tables.c
@@ -676,6 +676,7 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x00000032, 0x0100 },    /* R50    - PWM Drive 3 */
 	{ 0x00000040, 0x0000 },    /* R64    - Wake control */
 	{ 0x00000041, 0x0000 },    /* R65    - Sequence control */
+	{ 0x00000042, 0x0000 },    /* R66    - Spare Triggers */
 	{ 0x00000061, 0x01FF },    /* R97    - Sample Rate Sequence Select 1 */
 	{ 0x00000062, 0x01FF },    /* R98    - Sample Rate Sequence Select 2 */
 	{ 0x00000063, 0x01FF },    /* R99    - Sample Rate Sequence Select 3 */
@@ -1706,6 +1707,7 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_PWM_DRIVE_3:
 	case ARIZONA_WAKE_CONTROL:
 	case ARIZONA_SEQUENCE_CONTROL:
+	case ARIZONA_SPARE_TRIGGERS:
 	case ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_1:
 	case ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_2:
 	case ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_3:
diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h
index 3499d36..11affb3 100644
--- a/include/linux/mfd/arizona/registers.h
+++ b/include/linux/mfd/arizona/registers.h
@@ -39,6 +39,7 @@
 #define ARIZONA_PWM_DRIVE_3                      0x32
 #define ARIZONA_WAKE_CONTROL                     0x40
 #define ARIZONA_SEQUENCE_CONTROL                 0x41
+#define ARIZONA_SPARE_TRIGGERS                   0x42
 #define ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_1    0x61
 #define ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_2    0x62
 #define ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_3    0x63
@@ -1431,6 +1432,42 @@
 #define ARIZONA_WSEQ_ENA_JD2_RISE_WIDTH               1  /* WSEQ_ENA_JD2_RISE */
 
 /*
+ * R66 (0x42) - Spare Triggers
+ */
+#define ARIZONA_WS_TRG8                          0x0080  /* WS_TRG8 */
+#define ARIZONA_WS_TRG8_MASK                     0x0080  /* WS_TRG8 */
+#define ARIZONA_WS_TRG8_SHIFT                         7  /* WS_TRG8 */
+#define ARIZONA_WS_TRG8_WIDTH                         1  /* WS_TRG8 */
+#define ARIZONA_WS_TRG7                          0x0040  /* WS_TRG7 */
+#define ARIZONA_WS_TRG7_MASK                     0x0040  /* WS_TRG7 */
+#define ARIZONA_WS_TRG7_SHIFT                         6  /* WS_TRG7 */
+#define ARIZONA_WS_TRG7_WIDTH                         1  /* WS_TRG7 */
+#define ARIZONA_WS_TRG6                          0x0020  /* WS_TRG6 */
+#define ARIZONA_WS_TRG6_MASK                     0x0020  /* WS_TRG6 */
+#define ARIZONA_WS_TRG6_SHIFT                         5  /* WS_TRG6 */
+#define ARIZONA_WS_TRG6_WIDTH                         1  /* WS_TRG6 */
+#define ARIZONA_WS_TRG5                          0x0010  /* WS_TRG5 */
+#define ARIZONA_WS_TRG5_MASK                     0x0010  /* WS_TRG5 */
+#define ARIZONA_WS_TRG5_SHIFT                         4  /* WS_TRG5 */
+#define ARIZONA_WS_TRG5_WIDTH                         1  /* WS_TRG5 */
+#define ARIZONA_WS_TRG4                          0x0008  /* WS_TRG4 */
+#define ARIZONA_WS_TRG4_MASK                     0x0008  /* WS_TRG4 */
+#define ARIZONA_WS_TRG4_SHIFT                         3  /* WS_TRG4 */
+#define ARIZONA_WS_TRG4_WIDTH                         1  /* WS_TRG4 */
+#define ARIZONA_WS_TRG3                          0x0004  /* WS_TRG3 */
+#define ARIZONA_WS_TRG3_MASK                     0x0004  /* WS_TRG3 */
+#define ARIZONA_WS_TRG3_SHIFT                         2  /* WS_TRG3 */
+#define ARIZONA_WS_TRG3_WIDTH                         1  /* WS_TRG3 */
+#define ARIZONA_WS_TRG2                          0x0002  /* WS_TRG2 */
+#define ARIZONA_WS_TRG2_MASK                     0x0002  /* WS_TRG2 */
+#define ARIZONA_WS_TRG2_SHIFT                         1  /* WS_TRG2 */
+#define ARIZONA_WS_TRG2_WIDTH                         1  /* WS_TRG2 */
+#define ARIZONA_WS_TRG1                          0x0001  /* WS_TRG1 */
+#define ARIZONA_WS_TRG1_MASK                     0x0001  /* WS_TRG1 */
+#define ARIZONA_WS_TRG1_SHIFT                         0  /* WS_TRG1 */
+#define ARIZONA_WS_TRG1_WIDTH                         1  /* WS_TRG1 */
+
+/*
  * R97 (0x61) - Sample Rate Sequence Select 1
  */
 #define ARIZONA_WSEQ_SAMPLE_RATE_DETECT_A_SEQ_ADDR_MASK 0x01FF  /* WSEQ_SAMPLE_RATE_DETECT_A_SEQ_ADDR - [8:0] */
-- 
1.7.2.5

[PATCH 2/2] mfd: wm5110: Add register patch for rev E and above

[Charles Keepax]

Add a register patch for rev E and above that configures the location of
some write sequences to assist with the headphone enable/disable.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---
 drivers/mfd/wm5110-tables.c |   13 ++++++++++++-
 1 files changed, 12 insertions(+), 1 deletions(-)

diff --git a/drivers/mfd/wm5110-tables.c b/drivers/mfd/wm5110-tables.c
index f9878bf..6c719d07 100644
--- a/drivers/mfd/wm5110-tables.c
+++ b/drivers/mfd/wm5110-tables.c
@@ -249,6 +249,15 @@ static const struct reg_default wm5110_revd_patch[] = {
 	{ 0x80, 0x0 },
 };
 
+static const struct reg_default wm5110_reve_patch[] = {
+	{ 0x80, 0x3 },
+	{ 0x80, 0x3 },
+	{ 0x4b, 0x138 },
+	{ 0x4c, 0x13d },
+	{ 0x80, 0x0 },
+	{ 0x80, 0x0 },
+};
+
 /* We use a function so we can use ARRAY_SIZE() */
 int wm5110_patch(struct arizona *arizona)
 {
@@ -266,7 +275,9 @@ int wm5110_patch(struct arizona *arizona)
 					     wm5110_revd_patch,
 					     ARRAY_SIZE(wm5110_revd_patch));
 	default:
-		return 0;
+		return regmap_register_patch(arizona->regmap,
+					     wm5110_reve_patch,
+					     ARRAY_SIZE(wm5110_reve_patch));
 	}
 }
 EXPORT_SYMBOL_GPL(wm5110_patch);
-- 
1.7.2.5