From: Alexander Kuleshov <kuleshovmail@gmail.com>
To: Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>, "H. Peter Anvin" <hpa@zytor.com>
Cc: Alexander Kuleshov <kuleshovmail@gmail.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
LKML <linux-kernel@vger.kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Borislav Petkov <bp@suse.de>,
Mark Rustad <mark.d.rustad@intel.com>,
Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH v11 1/5] x86/setup: introduce setup_bultin_cmdline
Date: Tue, 9 Jun 2015 17:11:14 +0600 [thread overview]
Message-ID: <1433848274-4332-1-git-send-email-kuleshovmail@gmail.com> (raw)
In-Reply-To: <1433848247-3550-1-git-send-email-kuleshovmail@gmail.com>
This patch introduces the setup_builtin_cmdline function which appends or
overrides boot_command_line with the builtin_cmdline if CONFIG_CMDLINE_BOOL
is set.
Previously this functional was in the setup_arch, but we need to move
it for getting actual command line as early as possible in the
arch/x86/kernel/head{32,64}.c for the earlyprintk setup.
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
---
arch/x86/include/asm/setup.h | 1 +
arch/x86/kernel/setup.c | 30 +++++++++++++++++-------------
2 files changed, 18 insertions(+), 13 deletions(-)
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index f69e06b..59efd0d 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -119,6 +119,7 @@ asmlinkage void __init x86_64_start_kernel(char *real_mode);
asmlinkage void __init x86_64_start_reservations(char *real_mode_data);
#endif /* __i386__ */
+void __init setup_builtin_cmdline(void);
#endif /* _SETUP */
#else
#define RESERVE_BRK(name,sz) \
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index d74ac33..edd4857 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -845,6 +845,22 @@ dump_kernel_offset(struct notifier_block *self, unsigned long v, void *p)
return 0;
}
+void __init setup_builtin_cmdline(void)
+{
+#ifdef CONFIG_CMDLINE_BOOL
+#ifdef CONFIG_CMDLINE_OVERRIDE
+ strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
+#else
+ if (builtin_cmdline[0]) {
+ /* append boot loader cmdline to builtin */
+ strlcat(builtin_cmdline, " ", COMMAND_LINE_SIZE);
+ strlcat(builtin_cmdline, boot_command_line, COMMAND_LINE_SIZE);
+ strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
+ }
+#endif
+#endif
+}
+
/*
* Determine if we were loaded by an EFI loader. If so, then we have also been
* passed the efi memmap, systab, etc., so we should use these data structures
@@ -973,19 +989,7 @@ void __init setup_arch(char **cmdline_p)
bss_resource.start = __pa_symbol(__bss_start);
bss_resource.end = __pa_symbol(__bss_stop)-1;
-#ifdef CONFIG_CMDLINE_BOOL
-#ifdef CONFIG_CMDLINE_OVERRIDE
- strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
-#else
- if (builtin_cmdline[0]) {
- /* append boot loader cmdline to builtin */
- strlcat(builtin_cmdline, " ", COMMAND_LINE_SIZE);
- strlcat(builtin_cmdline, boot_command_line, COMMAND_LINE_SIZE);
- strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
- }
-#endif
-#endif
-
+ setup_builtin_cmdline();
strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
*cmdline_p = command_line;
--
2.4.0.GIT
next prev parent reply other threads:[~2015-06-09 11:11 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-09 11:10 [PATCH v11 0/5] x86/earlyprintk: setup serial earlyprintk as early as possible Alexander Kuleshov
2015-06-09 11:11 ` Alexander Kuleshov [this message]
2015-06-09 15:32 ` [PATCH v11 1/5] x86/setup: introduce setup_bultin_cmdline Andy Shevchenko
2015-06-09 11:11 ` [PATCH v11 2/5] x86/setup: handle builtin command line as early as possible Alexander Kuleshov
2015-06-09 11:11 ` [PATCH v11 3/5] x86/earlyprintk: Allocate early log_buf " Alexander Kuleshov
2015-06-09 15:58 ` Andy Shevchenko
2015-06-09 16:07 ` Borislav Petkov
2015-06-09 17:37 ` Alexander Kuleshov
2015-06-10 9:04 ` Borislav Petkov
2015-06-10 9:25 ` Alexander Kuleshov
2015-06-09 11:11 ` [PATCH v11 4/5] x86/earlyprintk: setup earlyprintk " Alexander Kuleshov
2015-06-09 17:00 ` Andy Shevchenko
2015-06-09 18:00 ` Alexander Kuleshov
2015-06-10 9:44 ` Andy Shevchenko
2015-06-10 10:36 ` Alexander Kuleshov
2015-06-10 10:41 ` Alexander Kuleshov
2015-06-09 11:11 ` [PATCH v11 5/5] x86/earlyprintk: Patch for testing earlyprintk Alexander Kuleshov
2015-06-09 15:30 ` Andy Shevchenko
2015-06-09 16:11 ` Borislav Petkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1433848274-4332-1-git-send-email-kuleshovmail@gmail.com \
--to=kuleshovmail@gmail.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=bp@suse.de \
--cc=gregkh@linuxfoundation.org \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.d.rustad@intel.com \
--cc=mingo@redhat.com \
--cc=tglx@linutronix.de \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox