public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Duc Dang <dhdang@apm.com>
To: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Ian Campbell <ian.campbell@citrix.com>,
	Marcin Juszkiewicz <mjuszkiewicz@redhat.com>,
	Tanmay Inamdar <tinamdar@apm.com>,
	patches@apm.com, Duc Dang <dhdang@apm.com>
Subject: [PATCH 1/1] PCI: X-Gene: Disable Configuration Request Retry Status for X-Gene v1 PCIe
Date: Thu, 11 Jun 2015 13:08:14 -0700	[thread overview]
Message-ID: <1434053294-10962-1-git-send-email-dhdang@apm.com> (raw)

X-Gene v1 PCIe controller has a bug in Configuration Request Retry
Status (CRS) logic:
  When CPU tries to read Vendor ID and Device ID of not-existed
  remote device, the controller returns 0xFFFF0001 instead of
  0xFFFFFFFF; this will add significant delay in boot time as
  pci_bus_read_dev_vendor_id will wait for 60 seconds before
  giving up.

So for X-Gene v1 PCIe controllers, disable CRS capability
advertisement by clearing CRS Software Visibility bit before
returning the Root Capability value to the callers. This is done
by implementing X-Gene PCIe specific xgene_pcie_config_read32 for
CFG read accesses to replace the generic default pci_generic_config_read32
function.

Signed-off-by: Duc Dang <dhdang@apm.com>
---
 drivers/pci/host/pci-xgene.c | 48 +++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 47 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/host/pci-xgene.c b/drivers/pci/host/pci-xgene.c
index ee082c0..741a253 100644
--- a/drivers/pci/host/pci-xgene.c
+++ b/drivers/pci/host/pci-xgene.c
@@ -59,6 +59,12 @@
 #define SZ_1T				(SZ_1G*1024ULL)
 #define PIPE_PHY_RATE_RD(src)		((0xc000 & (u32)(src)) >> 0xe)
 
+#define ROOT_CAP_AND_CTRL		0x5C
+
+/* PCIe IP version */
+#define XGENE_PCIE_IP_VER_UNKN		0
+#define XGENE_PCIE_IP_VER_1		1
+
 struct xgene_pcie_port {
 	struct device_node	*node;
 	struct device		*dev;
@@ -67,6 +73,7 @@ struct xgene_pcie_port {
 	void __iomem		*cfg_base;
 	unsigned long		cfg_addr;
 	bool			link_up;
+	u32			version;
 };
 
 static inline u32 pcie_bar_low_val(u32 addr, u32 flags)
@@ -140,9 +147,44 @@ static void __iomem *xgene_pcie_map_bus(struct pci_bus *bus, unsigned int devfn,
 	return xgene_pcie_get_cfg_base(bus) + offset;
 }
 
+int xgene_pcie_config_read32(struct pci_bus *bus, unsigned int devfn,
+			      int where, int size, u32 *val)
+{
+	void __iomem *addr;
+	struct xgene_pcie_port *port = bus->sysdata;
+
+	addr = bus->ops->map_bus(bus, devfn, where & ~0x3);
+	if (!addr) {
+		*val = ~0;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	*val = readl(addr);
+	/*
+	 * X-Gene v1 PCIe controller has a bug in Configuration Request
+	 * Retry Status (CRS) logic:
+	 *  When CPU tries to read Vendor ID and Device ID of not-existed
+	 *  remote device, the controller returns 0xFFFF0001 instead of
+	 *  0xFFFFFFFF; this will add significant delay in boot time as
+	 *  pci_bus_read_dev_vendor_id will wait for 60 seconds before
+	 *  giving up.
+	 * So for X-Gene v1 PCIe controllers, disable CRS capability
+	 * advertisement by clearing CRS Software Visibility bit before
+	 * returning the Root Capability value to the callers.
+	 */
+	if (pci_is_root_bus(bus) && (port->version == XGENE_PCIE_IP_VER_1) &&
+	    ((where & ~0x3) == ROOT_CAP_AND_CTRL))
+		*val &= ~(PCI_EXP_RTCAP_CRSVIS << 16);
+
+	if (size <= 2)
+		*val = (*val >> (8 * (where & 3))) & ((1 << (size * 8)) - 1);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
 static struct pci_ops xgene_pcie_ops = {
 	.map_bus = xgene_pcie_map_bus,
-	.read = pci_generic_config_read32,
+	.read = xgene_pcie_config_read32,
 	.write = pci_generic_config_write32,
 };
 
@@ -483,6 +525,10 @@ static int xgene_pcie_probe_bridge(struct platform_device *pdev)
 	port->node = of_node_get(pdev->dev.of_node);
 	port->dev = &pdev->dev;
 
+	port->version = XGENE_PCIE_IP_VER_UNKN;
+	if (of_device_is_compatible(port->node, "apm,xgene-pcie"))
+		port->version = XGENE_PCIE_IP_VER_1;
+
 	ret = xgene_pcie_map_reg(port, pdev);
 	if (ret)
 		return ret;
-- 
1.9.1


             reply	other threads:[~2015-06-11 20:08 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-11 20:08 Duc Dang [this message]
2015-06-12  9:04 ` [PATCH 1/1] PCI: X-Gene: Disable Configuration Request Retry Status for X-Gene v1 PCIe Marcin Juszkiewicz
2015-06-12 10:51 ` Ian Campbell
2015-06-12 21:59 ` Bjorn Helgaas
2015-06-12 22:10   ` Duc Dang
2015-06-12 23:08     ` Bjorn Helgaas
2015-06-13  0:35       ` [PATCH v2 " Duc Dang
2015-06-18 17:55         ` Bjorn Helgaas
2015-06-18 18:11           ` Duc Dang
2015-06-18 20:02           ` Bjorn Helgaas
2015-06-18 18:00         ` Tanmay Inamdar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1434053294-10962-1-git-send-email-dhdang@apm.com \
    --to=dhdang@apm.com \
    --cc=bhelgaas@google.com \
    --cc=ian.campbell@citrix.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=mjuszkiewicz@redhat.com \
    --cc=patches@apm.com \
    --cc=tinamdar@apm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox